Does 4507 support "object-group"

Hi, Need put lot's of ACL in a VLAN, I think if use "object-group" it is much easier for maintainance. What version switch IOS support this feature or not? Thanks.

AFAIK, object-groups are only supported on PIX and other security appliances.
One thing you could do though is, if you have a long access list then you might be able to enhance performance of the switch by enabling Turbo ACL. Take a look at the link below.
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a0080080374.html
Pls. rate the post if it helped.
HTH,
Sundar

Similar Messages

Xdb_installation_trigger does not support object creation of type SNAPSHOT

hi everyone, i'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit on solaris sparc 5.10
we like to send an email through SSL, and after searching here and there I found out that oracle DB 11g able to go throught the SSL.
since upgrade our DB to 11g would not be an option, so i tried to export XDB of 11g and import it into XDB 10gR2 schema, it was a mess...
then i just reinstall XDB using catnoqm.sql & catqm.sql
and now one of our programmer cant run some script like above
CREATE MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY
TABLESPACE MARKETING_TABLES
PCTUSED    40
PCTFREE    10
INITRANS   2
MAXTRANS   255
STORAGE    (
INITIAL          64K
MINEXTENTS       1
MAXEXTENTS       UNLIMITED
PCTINCREASE      0
FREELISTS        1
FREELIST GROUPS 1
BUFFER_POOL      DEFAULT
+)+
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
+/* Formatted on 9/23/2010 1:07:42 PM (QP5 v5.114.809.3010) */+
SELECT   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date,
SUM (scheme_adm) scheme_adm,
SUM (appl_unit) appl_unit,
SYSDATE mkt_sysdate
FROM   (SELECT   NVL (a.coy_id, '01') coy_id,
a.branch_id appl_branch_id,
DECODE (a.buss_unit, 'NMC', '2101', 'UMC', '2102', '2352')
appl_object_code,
a.platform product_type,
TRUNC (c.contract_active_date) ppdcf_paid_date,
NVL (s.ms_amt, 0) scheme_adm,
NVL (o.total_item, 0) appl_unit
FROM   ordmgmt.om_trn_appl_ms_lvl_object s,
ordmgmt.om_trn_appl_hdr a,
acctmgmt.ar_trn_sum_contracts c,
+( SELECT appl_no, COUNT ( * ) total_item+
FROM   ordmgmt.om_trn_appl_object
GROUP BY   appl_no) o
WHERE       s.appl_no = a.appl_no
AND a.appl_no = o.appl_no
AND s.ms_code IN ('MS03', 'MS14')
AND c.appl_no = a.appl_no
AND c.contract_no = a.contract_no
+/*AND c.office_code = a.branch_id*/+
AND NVL (a.coy_id, '01') = NVL (c.coy_id, '01'))
GROUP BY   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date;
COMMENT ON MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY IS 'snapshot table for snapshot MARKETING.FIFSYS_MKT_SCHEME_MV_COY';
and this error shown:
ORA-00604 error occurred at recursive SQL level 1
ORA-20000 Trigger xdb_installation_trigger does not support object creation of type SNAPSHOT
ORA-06512 at line 32
maybe some of you know how to solve this problem??
and, this in the script of the xdb_installation_trigger
DROP TRIGGER SYS.XDB_INSTALLATION_TRIGGER;
CREATE OR REPLACE TRIGGER SYS.xdb_installation_trigger
BEFORE
CREATE ON DATABASE
DECLARE
sql_text varchar2(200);
val number;
BEGIN
if (dictionary_obj_owner != 'XDB') then
if (dictionary_obj_type = 'FUNCTION' or
dictionary_obj_type = 'INDEX' or
dictionary_obj_type = 'PACKAGE' or
dictionary_obj_type = 'PACKAGE BODY' or
dictionary_obj_type = 'PROCEDURE' or
dictionary_obj_type = 'SYNONYM' or
dictionary_obj_type = 'TABLE' or
dictionary_obj_type = 'TABLESPACE' or
dictionary_obj_type = 'TYPE' or
dictionary_obj_type = 'VIEW' or
dictionary_obj_type = 'USER'
+)then+
if (dictionary_obj_type != 'PACKAGE BODY'
+) then+
sql_text := 'select count(*) from ALL_OBJECTS where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
sql_text := 'select count(*) from dropped_xdb_instll_tab where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
insert into xdb_installation_tab values
+(dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type);+
end if;
end if;
end if;
else
raise_application_error(-20000, 'Trigger xdb_installation_trigger does not support object creation of type '||dictionary_obj_type);
end if;
end if;
end;
+/+
/********************************************************************************/

i'm so careless, after checking a fresh installation of the same version DB, i dont found xdb_installation_trigger.
so just by simply remove that trigger & everything works just fine. :)

The extraction program does not support object 0MAT_PLANT

Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

The extraction program does not support object 0JOB_ATTR

HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".

HP UFT 12.02 does not support .object property for most of the objects in Chrome

Hi ,
Chrome Version : 39
UFT Version : 12.02
Does not support .object property for WebTable,webList and So on.
It actually shows the native property in Object spy but when programatically we try to work on it, its unable to find the object.
I Know that for Browser Object .object property is not supported.
Regards,
Ashfaq Dhanakwala

You want the HP Enterprise Business Community and look in the Discussion Boards.
Its the Forum for all things related to professional products like Servers, NAS, Procurve, ALM, etc etc.
UFT was formerly known as QTP...
Functional Testing/QTP - HP Enterprise Business Community
Hope it helps.

The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1

Hai friends,
I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
"The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
What does it mean? Kindly help.
Regards,
Neha Solanki

Hi,
It's not Absolute version. It's obsolete version(means No more)
This will help you:----
The extraction program does not support object 0JOB_ATTR
Regards,
Suman

The extraction program does not support object ZTD_AW_17

Hi friends,
When doing extraction I am getting the below error.Please
see the below extract of system response.
"The extraction program does not support object ZTD_AW_17
Message no. R3 009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
System Response
The data extraction is terminated."
Please help me out.
thanks
Venkat

Hi Venkat,
Have you checked to see if the ZTD_AW_17 infoobject is in your system and active? If not, transport the object from your D system to the P system. Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there. If so reactivate the transfer rules and run the extraction again.
Aaron

The extraction program does not support object

I was loading data from R/3 to BW through a Generic Data source. Previously it was loaded successfully but when I loaded last time, there was an error
"The extraction program does not support object <Data Source Name>"
Can somebody help me out please?

Hi,
Please check this.
Loading Problem
Regards.

The extraction program does not support object 0MATERIAL

Hi All,
can you please help me with the issue that we have for some of our Master data load.
Full Loads are working fine, Delta Init is working fine as well. but Delta load is not the error is "The extraction program does not support object 0MATERIAL"
already tried looking for some OSS note but none of them helps.
hope anyone can help me.
Thanks in advance,
Alden

Hi Christopher,
Below is the reply that I got from SAP Consultant:
I assume that this issue was happened after upgrade
which is already mentioned in the consulting notes 1165059 & 1251433:
-> 1165059 ALE: Generating and reading change pointers after Upgrade
-> 1251433 SAPI: Creating and reading change pointers after Upgrade
Can you have a look at these consulting notes to get more information
in details about ALE changing and follow my recommended steps to solve
this problem please:
1. Can you check this affected datasource in table ROOSGEN in source
system and you will find the generated Message Type in MSGTYP:
->Tx. se16 ROOSGEN:
OLTPSOURCE SLOGSYS RLOGSYS MSGTYP ->???
2. Then you can check this Message Type (RS*) in table TBDA2 and you
will see that the flag (BDCP2_ACT) is missing here in table TBDA2 :
->Tx. se16 ->TBDA2:
MESTYP ACTIVE BDCP2_ACT
RS* X (empty!)
3. If the flage (BDCP2_ACT) is missing here in table TBDA2:
Then you have to do the following steps:
->start transaction SALE:
Modelling and Implementing Business Processes
Master Data Distribution
Replication of Modified Data
Activate Change Pointers for Message Type
-> select the affected generated Message Type
-> RS* ->deavivate and activate again
Afterwards the missing flag should be set correct in TBDA2 again.
Please check it first and then you can start the delta upload in
your BW system side again. The data load should work correct now.
After carrying out the above steps we were able to re initialize the master data.
Regards and Thanks,
Vivek

Does 9iAS support nested groups?

For examples, our company is a large company which has more than 20 braches, and each branch has subbraches and departments, so when implement the previous intranet, we map all the organization stucture to a nested group system. We enjoy this design, because managing the privileges is a easy task: only grant/revoke permission to/from the group that mirror to a physical organization unit.
We intend move our next generation intranet to Oracle 9iAS, especially the Poral, but does it support nested groups structure?
Thanks,
Hunte

Work Around:
On your mac:
1. Open a new email
2. Insert name of an existing group into one of the "To" fields as usual.
3. Highlight all the resulting names in the "To" entry
     [Highlight first name, and while holding shift, highlight last name and all will highlight[]
4. Copy (Command C) the highlighted emails
5. Paste (Command V) nto a pages document
6. Remove the name and anything else preceeding the first < and also the first < of only the first entry whixh will look like this:
     [email protected]>,
7. Remove the > of the last email which will look like this:
     , Jane Doe <[email protected]
8. Copy the entire altered list from the pages document
9, Go to Contact Book and click + to add a new entry
10.. Name the entry (XXX Group for iPad) or whatever you wish to call it
11. Paste all the copied altered list into any one of the email entry spaces
12. Click on "Done"
13. Create new email On iPad and click on + in any one of the "To" lines and search for "XXX Group for iPad" You cannot just key in XXX Group for iPad!!!!!!!, you must use + contact search.
14. Enter the selected iPad contact group into the "To" line.
15. All the entries will now appear in the "To" line and you are good to go.
Adding or deleting email addresses from the iPad group:
Easiest: Alter the original mac group in the usual way and repeat steps 1-14 above. It seems impossible to edit within the emai line of the iPad contact entry.
Rediculously simple once figured out.
Happy emailling, but please send Bcc so that you don't spread your groups' email addresses all over the internet for spam, viruses, and other unwanted emails. Be considerate and ask your recipients to notifiy you if they wish to be deleted from the lists you compose.

Does DPS support Object States or will it in the future?

Most, if not all of the interactive publications I have designed in ID CS5 use object states to deliver large amounts of content in a cleaner, less-cluttered manner; I find the object states feature of InDesign to be by far the most powerful interactive component. Does DPS have the object states feature or will it in the future?

Yes, object states are supported. Create object states, select object states and then fine tune in the Overlay Creator. You can make buttons to go to next/previous or specific state, you can autoplay swipe through object states etc.

Does Orbix support Object-by-value?

As title.
Cheers - Wei

"Wei Guan" <[email protected]> writes:
As title.Orbix2000 does, but we have found bugs in the Orbix idl compiler which
mean that we have not got it to work with WLS. We are currently not
aware of any bugs in WLS 6.1 that would prevent working with Orbix2000
if the Orbix bugs were fixed.
Right now if you want to guarantee interworking with a C++ client
using objects-by-value then you should use Tuxedo 8.0 CORBA/C++
clients.
andy

Does BPC 5.1 support separate Group/Currency dimensions for Legal?

Hello All,
I see in the documentation that I have for BPC 5.1 that currently the Legal Application does not support separate Group & Currency dimensions for Legal Consolidations. Does anyone know if this is still true? If not, is there new logic/documentation of this somewhere?
Thanks,
Michael

Hi
BPC each application can have only one rate dimension and normally its currency but for legal consolidation we use Groups as rate type dimension and where you can include you currencies also.
The reason being the LC copies the numbers to groups first and then consolidate and similarly it uses same logic to convert into different currencies hence you can use same dimension for both.
Else create user defined dimension for currencies which would make life miserable.
Thanks and Regards
Harish B K

Does Oracle support this........

Hi
I want to select values in a object types in a table over the database link. like
select name from [email protected]
where name is of type varray(3) of varchar2(100) in the country table and db.com is database link.
It is giving me error ORA-22804.
Does Oracle supports this or not?
Regds
~Sachin

Your answer is in the message text - Oracle does not support object operations over a database link.
null

Strange IE ExternalInterface Bug: "Object does not support this property or method"

We have an application on a relatively slow server (I mention
the speed because it may be relevant).
The app is flash 8 and uses ExternalInterface to call a
javascript function in its parent page. It also used the
ExternalInterface to receive a call from another function. These
calls happens separately (the outbound one calls up a list view of
items, clicking on an item calls up the details in the flash
movie). In between the calls, the flash movie is hidden by moving
it off screen using absolute positioning.
On my local development box (Windows XPSP2) this works fine
in both directions.
On our production server (LAMP) this works fine in both
directions in Firefox 1.5 and 2.0
BUT while the outbound call from Flash to the page works fine
in Internet Explorer 6 or 7, the call back from the page to the
flash movie fails with the error messgage "Object does not support
this method or property"
We've tried not hiding the flash so it is always present on
the page and still the browser > flash communication breaks in
ie.
We've tried using both the Adobe active content script and
swfobject to embed the flash in the page with no difference in the
resultset. In truth we've given up and gone to a two-page solution,
reloading the flash from the start each time but I wondered if
anyone had encountered a similar issue? Can't see why it would work
perfectly in FF but not in IE.

Not sure if this is your problem, but you do reference the
Flash object
differently, depending on the browser. In a video player we
made, that uses
JS to communicate back to Flash, I use a function like this
to modify the
variable depending on the browser:
function changeVideo(xname){
//ff
if(window.vplayer){
window.document["vplayer"].SetVariable("theXML", xname);
window.document["vplayer"].GotoFrame(2);
window.document["vplayer"].Play();
//ie
if(document.vplayer){
document.vplayer.SetVariable("theXML", xname);
document.vplayer.GotoFrame(2);
document.vplayer.Play();
The Flash is in a <div> named 'vplayer'
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Does 4507 support "object-group"

Similar Messages

Maybe you are looking for