Does anyone know how to convert file into a .png?

Does anyone know how to convert file into a .png?
Thanks

I tried to give an answer with less steps. I know it's a Pages file & all you have to do is select & copy the content in your Pages file & then open Preview.app. Next time I'll include the exporting to PDF & opening that in Preview.app or in Pages go to File > Print > click on the PDF button in the lower left of the print window & choose Open in Preview.

Similar Messages

  • Does anyone know how to import files into FCP X using focus enhancements FS-CV (DTE)?

    I've just purchase Final Cut X and the system does not recognise any (most) of the files on my FS-CV DTE hard drive. All files are quicktime.

    In FCP 7 I'd normally use the Log and Transfer function to convert the AVCHD files to ProRes. However with FCP X you can use the Import from Camera... command in the File menu or the button shortcut for the same function.
    This can be done by connecting the camera, or putting the memory card from the camera into a card reader, and then, from within the Imprt from Camera dialogue, selecting Open Archive and select the camera, card or in my case the backup I've made of the card.
    I regularly back up my AVCHD files to hard disk, or BluRay data disk, so I can reuse my SD cards but an important thing to remember when doing this is that you need to copy the whole directory structure of the memory card to a new folder on the hard drive. Simply selecting the .mts files won't work as the 'Import From Camera' function needs to see the whole directory structure to interpret the what files are there etc. I create a new folder and then copy all the folders and files on my card into that folder on my hard drive. When selecting Import from Camera/Open Archive I then choose the folder, not the files inside it. Once this is done the video files are presented and I can audition them and choose to import all of them or select the files I want.
    None of these methods require the files to be transcoded prior to import. You can choose the transcoding method during import so that either high quality ProRes files are created or Proxy files, smaller and lower quality for editing.

  • Does anyone know how to convert an XML file to a readable file?

    All,
    I have been using an APP called "SMS Backup & Restore" to backup my message conversations to my Laptop PC.  It works fine BUT the backup file, once in my PC, has an XML extent such as "filename.XML"
    I would like to read and/or print and/or save the text message file so does anyone know how to convert the XML file to something else so it shows all the messages without all the formatting instructions.   
    When I try to see the XML file it shows all the formatting.  If I replace the .XML with .TXT that too shows all the formatting mixed in with the text message narrative.
    When I look at the XML file in SMS Backup & Restore in the Charge phone it looks great showing all the messages just as they were on the phones display.  The problem with this is that there is no way to print or read or save the messages as they appear in the file from the phone itself.  I tried screen capture but if you have, let's say, a 28 message conversation you have to do 7 or 8 screen captures to get them all.
    If only I could convert the XML in my PC to something that is printable or savable or readable that would be the "cats meow."
    Anyone know how???
    JerryF
    PS, You might take a look at my related post.
    https://community.verizonwireless.com/message/809832#809832

    Ann154,
    You were correct again.  I deleted everything I had done to date and re-did the entire SMS backup of my 28 message conversation again and YES I was able to open it using IE-8.  It looks great and it prints great and life is good!  I am going to go make a donation.
    Thanks again for the help.  I marked this thread as answered by you.
    JerryF

  • Does anyone know how to convert iTunes TV subscription downloads to files that I can put on a backup drive and watch on my TV vs. MacBook?

    I purchased a TV series from iTunes and downloaded the HD version. I then copied it to a backup drive so I could plug it in to my DVD player to watch. This would not work. Does anyone know how to convert the files so they are watchable on TV rather than on my MacBook?

    Video in the new iOS is under the application Videos. You should be able to find things there.

  • Does anyone know how to convert the output from the standard report to xml?

    Does anyone know how to convert the output from the standard SAP report to xml?

    since it a standard report which you cannot modify you can only do the following.
    submit report exporting list to memory
    then
    list from memory and then
    use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
    but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list .

  • Does anyone know how to convert a novel manuscript, written in Pages, to an Amazon e-book and CreateSpace document?

    Does anyone know how to convert a novel manuscript, written in Pages, to an Amazon e-book and CreateSpace document?  Do I need to purchase Word for my iBook?

    Susan,
    You need to create a pdf file of the document to print using CreateSpace. Check their size requirements and set up your document to fit those, make sure your cover has the correct bleed if the cover image goes "off the edge", and work your way through the guided system on CreateSpace. If you know someone who has done a book there, they might be able to help you, too. I will be doing a book from an author who used Pages soon, too, and though I use InDesign, he does not. I don't anticipate any problems with it, as a pdf is a file structure with which CreateSpace is familiar.
    You can also use their more tutorial-like set-up, too, perhaps, at least the first time through the process. I typically help first-time users through the process when I've helped create their books, too. It's mostly straight-forward, minus the upload problem I'm currently dealing with with my computer, of course!

  • Does anyone know how I turn negatives into a positive on Aperture please?  I have scanned  a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start.  Thanks

    does anyone know how I turn negatives into a positive on Aperture please?  I have scanned  a bunch of negs and want ot make a contact sheet. Would really appreciate some clues on where to start.  Thanks

    Yeah, it's simple. You scan your images singly, then import them. Then, one by one adjust them. Under the adjustment brick, pull up the CURVES tool. It is one of dozens available from the pulldown menu on the left side.
    So, with your image in view, you click on the adjustment tool, select CURVES (which will be at the bottom of a few other adjustment sliders such as EXPOSURE) under the Histogram and then grab the bottom of the right hand curve and swing it all the way to the left. Then grab the left hand curve and drag it all the way to the right.
    The right curve represents highlights. The left curve represents shadows. Now the two are reversed. Your negative is now a positive. For added control, you can create mid-tone curves of your own and make finer adjustments. I haven't done this much so the experts might weigh in here with corrections and added advice.

  • HT5624 I have recently changed my screen lock on my I pad and have forgotten it , does anyone know how I can get into my I pad ?

    I have recently changed my screen lock on my I pad and have forgotten it , does anyone know how I can get into my I pad ?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • Does anyone know how to convert 3GPP videos to the iPhone 4S?  I have favorite videos I would like to transfer to my new phone.  Any help would be appreciated.  Thank you.

    Does anyone know how to convert 3GPP videos to the iPhone 4S?  I can sync my photos from my computer but not my videos.  Any help would be appreciated.  Thank you.

    Hello,
    This link may be useful to you:
    http://www.iorgsoft.com/iphone-4s/convert-3gp-to-iphone-4s-on-mac.html

  • Does anyone know how to convert the .deploy file to ant script

    hi guys ,
    I am doing some work relate to J2EE/ADF application deployment. I need ant script to compile/ear and remote deploy.
    Does anyone know how to generate the ant script based on the .deploy file (eg.ejb.deploy and webservice.deploy ).
    although I can generate the ant script with creating buildfile from project ,but all the ant tasks are just compile ,no other deploy task...
    I much appreciate if anyone can give me a clue
    Kevin

    I don't know how to convert a .deploy file but you may use below commands to remotely deploy an ear file
    To compile
    c:\Oracle\Middleware\jdeveloper\jdev\bin\ojdeploy -profile EarProfile -workspace MyApp\MyApp.jws
    To Deploy
    c:\Oracle\Middleware\wlserver_10.3\server\bin\setWLSEnv.cmd
    java weblogic.Deployer -adminurl http://localhost:7101 -user weblogic -password weblogic1 -deploy -upload MyApp\deploy\EarProfile.earMore Details
    http://edocs.bea.com/wls/docs100/deployment/understanding.html#wp1057841

  • DoEs AnYoNe KnOw HoW tO cOnVeRt GrAyScAlE ImAgEs To CoLoUr????

    Hi all,
    I 've got a simple image which has buildings,roads and grass areas. The image is currently in greyscale, and is basically a 400 by 700 text file full of interger values each representing a different land class - i.e. buildings have a value of 200, roads = 100 and grass areas = 60.
    does anyone know how to get the image from a grayscale image to a colour image?
    rob
    x

    argh... got confuse cos your subject.
    I 've got a simple image which has buildings,roads and grass areas. The image is currently in greyscale, and is basically a 400 by 700 text file full of interger values each representing a different land class - i.e. buildings have a value of 200, roads = 100 and grass areas = 60.this is not grayscale image rob. that file is data representation for your map, not color.
    sure you can convert it to color image, but you must define what color convertion do you like.
    DoEs ThIs SuBjEcT rElAtEd tO java?

  • Does anyone know how to sort pictures into albums on the iphone 3g. many thanks

    does anyone know how to sort pictures on the iphone3g. many thanks

    This will explain how: 
    iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

  • Does anyone know how to convert a Filemaker flat file to some other program that runs on Lion?

    I have a flat file of 200 recipes in Filemaker. It is searchable and prints the recipes on 4x6 cards.
    How can I get the same funtionality without getting an expensive new version of FM that runs on Lion?

    In order to password protect files or folders, you need to create an encrypted disk image. Then what ever is copied to the disk image will be protected.
    The directions to do this are here
    http://support.apple.com/kb/ht1578
    Allan

  • Does anyone know how to open file '.balance' which made from 'Balance' app that I downloaded from App Store and now it's discontinue?

    I have my expense file which made by 'Balance' app. Now I cannot find the app in App Store and cannot open the file.
    If anyone has a way to open the file, please share.

    watanasak wrote:
    I cannot find any way to contact the developer.
    I thought only IOS app is back up to iTunes. Mac apps are not, am I right?
    I can't find the app anywhere in my system and all the Mac app download websites.
    I really need the data in the file.
    I'm not sure if any other apps can open '.balance' file extension.
    I'm confused. I thought you were talking about this Balance - it is an iOS-only app. If you are talking about some other app, then you will have to look on your Time Machine backup.
    I am quite certain that only that app will be able to open the data.

  • Does anyone know how to install mod_plsql into original Apache?

    Hi ALL!
    By some reasons I prefer not to use Apache from ORACLE in our business - so I would like to use Apache built from source. But how can I use mood_plsql to acces main server?
    Insatllation of mod_plsql and mod_ora_psql (downloaded by links from Aache.org) was Ok ..... but results was wrong 8((((
    I wonder if somebody could help me!
    Best regards and sorry for poor english!

    Hopefully, this should help.
    Even though it's vista specific, it should on windows 8 as well.
    Effects panel
    Install Actions in Photoshop Elements 7 on Vista
    Action player
    Install Actions in the PSE Action Player

Maybe you are looking for