Does DVDSP use the full frame?

Hi,
Does DVD SP use the full raster of my video stream? In other words, if I feed it 720x576 PAL video, will the entire image area be in the resulting DVD?
I realize that if the DVD is played on a TV set, there will be some amount of underscanning, and I will lose part of my frame.
But what if the DVD is played on a computer screen?
The reason I'm asking is that I have a timeline in FCP where some of the clips (having originted in a format other than PAL 720x576, do not extend all the way to the edges. They are about 2pixels short at the top, and about 5 pixels on the sides. If I turn the brightness up on my production monitor, I can clearly see the difference in image size between these clips and the clips where the image fills the 720x576 frame. (Of coure all of these clips are well within Action Safe, it is just the very outside of the frame.
Should I blow up the offending clips by 102% so that they fill up the frame? Or should I just leave them alone and not worry about it.
(I could apply a crop in Compressor, but that will increase my render time....)
I know that when outputting to 35mm film from video they try to use the entire frame, but apart from that I dont know if I should be concerned at all.
I'm a bit pressed for time, otherwise I would test this out myself. Thank you...

If your going to play on a computer this problem will show up on your monitor. It will not on a TV. The choice is yours.

Similar Messages

  • Can I have an external video source run in a window instead of using the full display?

    I'm aware that the 27" iMac models are capable of accepting external video sources, but I'm wondering if it's possible to have an external video source run in a window on the desktop, rather then use the full display. Does anyone know if there's any software I can download to allow this, or will I have to purchase a special capture device?

    hat I DON'T WANT TO OPEN the window application FROM the Labview VI BUT IN the Labview VI. I think it's possible to do that and to do communicate the OpenGL application with the Labview Interface using an ActiveX but I don't know how. Can someone help me ?The desired behavior you desribed may not be possible with that application. In general LabVIEW does not offer a window object that other standalone applications can run it. The closest thing is the ActiveX container. If the programmers for your application created an activeX control of your program and they provided documentation, it should be pretty easy to incorperate the app and labview into one window. I recommend contacting the manufacuturer of the app to see if they have an activeX control version of the app.

  • Firefox does not print the target frame in PeopleSoft Enterprise or Campus Soultions Portals

    When using PeopleSoft Enterprise Portal or Campus Solutions Portal Firefox does not print the target frame. PeopleSoft utilizes iframes and has indicated this is the technology path they will follow. On each page is a header, footer, and left menu. Content is displayed in the target after it is selected from the left menu. This issue prevents users from using the standard print preview or print functionality.

    We need the standard print and print preview functionality that all of our end users are already familiar with to work. We have a large end user group that is frustrated this functionality is available in IE and Chrome, but not Firefox.

  • Black horizontal bands across top & bottom of photos using a full frame camera

    I'm using a full frame camera with a 17-35mm lens.  When I import my photos to iPhoto they appear with a black horizontal band across the top and bottom of the photos.  Is this normal?

    What camera are you using?
    Where are you seeing these black bands? in the iPhoto library event view or somewhere else?
    LN

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • The application does not use the  screen and run in the background

    Hi
    I have downloaded a package of j2me Midlet
    from [link] here [link]
    and try to reuse the code
    but I get the following error when running the code:-
    The application does not use the screen and run in the background
    I think the error into one of these two classes
    package main;
    import javax.microedition.midlet.*;
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    import javax.microedition.media.Manager;
    import javax.microedition.media.MediaException;
    import javax.microedition.media.Player;
    import java.io.IOException;
    import java.io.InputStream;
    public class MainMidlet extends MIDlet implements CommandListener {
        private SSGameCanvas gameCanvas ;
        private Command exitCommand ;
        private Player player = null;
        public void startApp() {
      try {
           //   create new game thread
              gameCanvas = new SSGameCanvas();
              gameCanvas.start(); // start game thread
              exitCommand = new Command("Exit",Command.EXIT,1);
              gameCanvas.addCommand(exitCommand);
              gameCanvas.setCommandListener(this);
                Display.getDisplay(this).setCurrent(gameCanvas);
       catch (java.io.IOException e)
                e.printStackTrace();
            try {
                // start sounds
                InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
                player = Manager.createPlayer(in,"audio/x-wav");
                player.setLoopCount(1);
                player.start();
            catch (MediaException ex)
                ex.printStackTrace();
             catch (IOException ex)
                ex.printStackTrace();
        public void pauseApp() {
        public void destroyApp(boolean unconditional) {
            if (player != null) {
                player.close();
            System.gc();
      public void commandAction(Command command, Displayable displayable) {
           if (command == exitCommand)
                 destroyApp(true);
                 notifyDestroyed();
    package main;
    import java.io.IOException;
    import javax.microedition.lcdui.*;
    import javax.microedition.lcdui.game.*;
    public class SSGameCanvas extends GameCanvas implements Runnable {
        protected GameManager gameManager;
        protected boolean running;
        private int tick=0;
        private static int WIDTH;
        private static int HEIGHT;
        private int mDelay = 20;
        Form mainForm;
        Display display;
        //private int MaxTime;
        public SSGameCanvas() throws IOException{
            super(true);
            gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
        public void start() {
                this.running = true;
                Thread t = new Thread(this);
                t.start();
        public void stop() {
            running = false;
        public void render(Graphics g) {
            WIDTH = getWidth();
            HEIGHT = getHeight();
            // Clear the Canvas.
            g.setColor(0, 0, 50);
            g.fillRect(0,0,WIDTH-1,HEIGHT-1);
            // draw border
            g.setColor(200,0,0);
            g.drawRect(0,0,WIDTH-1,HEIGHT-1);
            // draw game canvas
            gameManager.paint(g);
        public void run() {
            while (running) {
                // draw graphics
                render(getGraphics());
                // advance to next graphics
                advance(tick++);
                // display
                flushGraphics();
                try { Thread.sleep(mDelay); }
                catch (InterruptedException ie) {}
        public void advance(int ticks) {
            // advance to next game canvas
            gameManager.advance(ticks);
            this.paint(getGraphics());
    }Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

    Hi Andi,
    Thanks for your reply.
    Yes, I have waited for a while and the result doesn't change.
    The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
    Can you please suggest anything.
    Thanks and regards
    Nagaraj

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • PS CS6 has a different set of installed fonts than my old PS CS4.  How do I get my old fonts back?  Don't like most of the CS6 fonts.  Dell Precision, Windows 7.  Does PS use the fonts in the Windows directory or does it use its own?  A lot of my preferre

    PS CS6 has a different set of installed fonts than my old PS CS4.  How do I get my old fonts back?  Don't like most of the newer CS6 fonts.  Dell Precision, Windows 7.  Does PS use the fonts in the Windows directory or does it use its own?  If so, where are they in the directory?  A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program.  Please help.  If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them?  Thanks.

    All versions of Photoshop get their fonts from your OS.  Just install any missing font wherever Windows keeps fonts.
    I don't do windows myself.

  • My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

    My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc  has been generated, but I don't want to do this.

    What application are you running? Please ask this in the forum of the product you're using.

  • [svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

    Revision: 16929
    Revision: 16929
    Author:   [email protected]
    Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
    Log Message:
    Add a class that will register the required class aliases in the event the mxml compiler generation  [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
    Add a reference to this class in the RPCClasses file so it always gets loaded.
    QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
    Bugs: Watson bug 2638788
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
    Added Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

    Great exercise to document the problem like this.  It got me thinking about how an app with modules would be different from an app that does not use modules.  Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked.  I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

  • Does facetime use the email address or the phone number to make a call

    Does facetime use the email address or the phone number to place a call

    Depends on what the receiver has set up on his or her device.
    Also depends on the device. iPhone uses the number, iPad, iPod touch uses Email. But can be set up for phone number too if the person has an iPhone.
    Hope this helps.
    PJRS

  • After Effects is NOT using the full Twelve GB of memory on my Mac Pro late 2013 dual video cards

    I would like to know if there is a reason why AE CC12 and CC13 (2014) is not using the full amount of video card memory on my MP late 2013. It's six GB per freaking card I invested in and its not accessing it.
    Is there a work around this issue?

    Why shouldn't it. When I upgraded to this new Mac Pro late 2013 with its dual video cards. Premier turned into a blasting fast editor. I no longer need to render my edited cuts and the scrubbing of preview and timeline footage is phenomenal. The only performance boost I've seen in AE with this new system is in rendering and I can't even say its double as fast in comparison to Premier or Encoder and its an 8-Core system with 32GB of ram. Everything else is flying.
    So again to answer your why should it. I rebuttal with "Why shouldn't it". The other two mentioned programs are using GPU resources to improve performance why is AE so behind the curve.
    I'm not the only one asking why. I was in the audience at a Dmala meeting here in LA with Todd Kopriva and Al Mooney previewing AE and Premier 2014.
    People kept asking Todd about performance boost in between questions about new features. Todd finally just asked what do you prefer a couple of new features or performance boost. Everyone wanted performance boost over new features. If you think I'm making this up go ask Todd Kopriva.

  • After i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

    after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

    after i bought mac os x lion from web then download , after that to install but when they ask me to choose disk to install i can not choose, it say this disk does not use the GUID partiton table scheme. use disk utility to change the partition scheme. but

  • Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
    If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
    Is there an easier way to do this, bypassing iDVD?
    Some DVD players will play a disc containing jpeg images

  • HT5225 "This disc does not use the GUID Partition Table Scheme...". I keep getting this message when I try to install OSXLion. It has something to do with a repair Apple performed last year. I use a 17" MacBookPro. Any suggestions?

    "This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.

    When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.

Maybe you are looking for