Does FMS support NFS-mounted streaming?

Hi. Does Flash Media Interactive Server support streaming of content NFS-mounted (network file system) rather than local to the server? Thanks.

See the docs for configuring content storage.
http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WS5b3ccc516d4fbf351e63e3d119f2 925e64-7fc7.html

Similar Messages

  • Does QTSS support HTTP Live Streaming?

    Hi all,
    I'm trying to create a streaming architecture based on HTTP Live Streaming.
    Does anyone know if QTSS supports the HTTP Live Streaming?
    And if not... is there any server that supports it?
    Thanks for the replies.

    Unfortunately, QTSS doesn't support HTTP Live Streaming. I wonder why Apple did not implement QTSS in Snow Leopard Server.
    However, Helix Universal Server from Real can do the trick.
    http://www.realnetworks.com/products-services/helix-server-proxy.aspx

  • Signall 11 when doing dmake on NFS mount.

    Hello,
    When I use dmake -j 20 on a local filesystem everything works fine. When I do this on a NFS mounted filesystem I get a scattering of errors, like the following, so I have to use make instead.
    I am using Sunpro 5.3 on Solaris 8 sparc.
    Compiling foo.cpp
    >> Signal 11:
    while processing CFETIManager.cpp at line 0.
    *** Error code 1
    dmake: Warning: Command failed for target `foo.o'

    Thanks for the help, I have asked our sys admins for the patches to be installed.
    I can email you the build.tr file if you like.
    The first one is here
    23208:     execve("/opt/WorkShop6.0/SUNWspro/bin/../WS6U2/bin/ccfe", 0x000661FC, 0x000677A8) argc = 55
    23208:     argv: /opt/WorkShop6.0/SUNWspro/bin/../WS6U2/bin/ccfe -y-o
    The second is here
    23208:     resolvepath("/home/nmitchell/nmitchell_unix_release/DistributedDevelopment/eSpeedAPI/sdk/cfetp/SOLARIS8/SUNPRO53/15s/sparc/CFETPRoutableMessage.o", "/home/nmitchell/nmitchell_unix_release/DistributedDevelopment/eSpeedAPI/sdk/cfetp/SOLARIS8/SUNPRO53/15s/sparc/CFETPRoutableMessage.o", 1024) = 132
    23208:     Incurred fault #6, FLTBOUNDS %pc = 0x0038C230
    23208:     siginfo: SIGSEGV SEGV_MAPERR addr=0xFF08C000
    23208:     Received signal #11, SIGSEGV [caught]
    23208:     siginfo: SIGSEGV SEGV_MAPERR addr=0xFF08C000
    23208:     sigaction(SIGSEGV, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGINT, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGQUIT, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGILL, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGABRT, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGFPE, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGBUS, 0xFFBECED8, 0xFFBECF58)     = 0
    23208:     sigaction(SIGTERM, 0xFFBECF38, 0xFFBECFB8)     = 0
    23208:     unlink("/home/nmitchell/nmitchell_unix_release/DistributedDevelopment/eSpeedAPI/sdk/cfetp/SOLARIS8/SUNPRO53/15s/sparc/SunWS_cache/CC_lockfile") = 0
    23208:     write(2, " > > S i g n a l 1".., 15)     = 15
    23208:     write(2, " w h i l e p r".., 62)     = 62
    23208:     sigaction(SIGSEGV, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGINT, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGQUIT, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGILL, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGABRT, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGFPE, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGBUS, 0xFFBECE08, 0xFFBECE88)     = 0
    23208:     sigaction(SIGTERM, 0xFFBECE68, 0xFFBECEE8)     = 0
    23208:     llseek(0, 0, SEEK_CUR)                    = 180281
    23208:     _exit(1)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Does FMS support live stream switching

    I read a blog article (
    http://www.peachpit.com/articles/article.aspx?p=665127)
    talking about switching between different bit rate video streams of
    the same video content on fly. But I can not find such ability in
    RTMP's specification. I am wondering if such function has to be
    implemented by users with ActionScript? Thanks!
    Yue

    Yes FMS does support live stream switching but its not at protocol level hence you are not finding it in RTMP specification.
    please read details about it here:
    http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/WS5b3ccc516d4fbf351e63e3d11a0773d5 6e-7fea.html
    Hope you find it useful.

  • Does iChat support JPEG video streaming

    Dear Sir,
    I would like to capture image and then encode to JPEG format and then send the JPEG file to iChat 15 times per second. Does iChat can display the JPEG file properly?
    Thanks!
    Best Regards,
    sunshine_uyl

    Ok,
    Some more backing up and standing back from this.
    I am still trying to interpret what it is exactly you are wishing to do.
    If this "board" is something you want to use as a Camera source and it supplies or rather can supply stills of one form or another at 15fps then I don't think this is going to possible.
    As one source iChat can use DV format in it's plainest form. (NOT DV or any proprietary versions)
    As another iChat can since OS X 10.4.9 use the UVC driver to access USB 2.0 UVC compliant cameras
    iChat has some support folders in the /System/Library and the Frameworks and PrivateFrameworks.
    These control which video feeds it allows in a sort of "Native" form if you like.
    This is through the CVPixelBuffer and the CVOpenGLBuffer (CV = Constant Video)
    At least for iChat 4 in Leopard - I am having difficulty in working out where they have moved things in iChat 5/Snow Leopard)
    Certain USB 1.1 Cameras that have Mac Drivers Installed on the Mac still need a third Party utility (iUSBCam) to convert the video from that camera into something iChat can use.
    Mostly these were VGA output (See Here http://en.wikipedia.org/wiki/Webcam#Technology)
    Certain IM apps such as Yahoo for Mac use a web cam but provide a collection of rapid Stills much like you talk about to give the appearance of movement.
    There are certain apps that can do the same and Stream those as a Live feed to a web site. See Evocam or Security Spy
    On the other hand can iChat deal with jpegs or in fact any Still format the answer is yes.
    In iChat 4 and higher there is iChat Theatre and iPhoto Share.
    iPhoto Share can play a Slide Show of anything in a collection/Slide show that has been set up in iPhoto (best to turn Music Off in my book).
    As this could be a folder within iPhoto I toyed with the idea of getting new pics into iPhoto fast enough to display in s Slide show but have not checked what the fastest display a Slide show can manage but doubt it is 15 a sec.
    iChat Theatre can be used to display the docs from other apps
    For Instance it can play Movies. If you have Quicktime Add-on plug-ins to display a movie on your Mac than it can play almost anything. (Perian can play Dvix for instance along with others and Flip4Mac can play .avi files and other Windows formats).
    It can also display the slides for Powerpoint or Keynote (Pays to change the Side Ratio to 4:3 or better still Square to fit the Chat Video Chat window).
    I must admit to not having tried that many other apps but the same should apply in a lot of cases.
    In both case your Video feed is replaced with a "Stream" of the App or file in question.
    Next.
    iChat can also do Backdrops in Video Chats on Intel macs.
    The Backdrop can be a single Still or a Movie (you are asked to step out of the Frame so it can register the background where you sit and then replaces that with the Movie or Pic). You don't have to step back into view and it could then "Stream" that pic.
    These are created by Quartz files splitting the Cameras Feed off from the background and adding either Filters for the Effects or Adding Pics or Movies for Backdrops.
    These files are created with Quartz Composer (Installed with Developers Tools on Your Install Disk > Optional Installs).
    Whether Quartz Composer can be made to "See" the Input from the "board" I am not sure. (Image seems to be one Still Only and Video seems to be the Camera (I did not spend long looking at how the controls/source might be tweaked).
    Thirdly.
    I was discussing this with EZ Jim, a level 4 poster who hangs out mostly in the iSight Forum.
    He was wondering if you meant getting the board to Chat with iChat like it was a Buddy (and then presumingly recording the Video chat, to get around the USB input constraint.
    If the board was Internet able and could Interact with either a Jabber Server or the AIM Servers (run an AIM or Jabber client that was Video Capable) it would have to send data in the H264 Video format.
    I don't think this is what you meant but I thought I would pose it for clarification.
    Another possibility is a DV converter as a Standalone items between the board and the Mac.
    I had one that had RCA, S-Video and Firewire inputs.
    This would be an expensive option and depend on what outputs the board has physically
    Summary.
    Board as camera I don't think is likely unless it can produce DV Video
    My 8 1/2 year old G4/1Ghz Dual Processor (Mirrored Door Tower) can handle an USB 2.0 UVC complaint camera.
    It has handled DV input from a DV converter in the past.
    It basically depends on the Pic size in this case (Aim for 640 X 480 pixels as a Max)
    Boards as Means to Input a feed like other apps for iChat Theatre would depend somewhat on the working space or Doc that was created.
    I would have to play around with a few more to find out what the limitation were.
    (At this point I would imagine using a single file that was being updated 15 time a sec but have difficulty thinking that many processors would cope with that let alone access it at the same time as another app was updating it.)
    I have a feeling iPhoto can not play a Slide Show with each pic being only 4 secs "long". It may also not cope with a folder that was having more pics added to it (Can't add Photos to Slide show on the fly as it were)
    I do feel the Quartz Composer route may have merit.
    Quartz Composer does allow Input from several sources an may be able to "see" the board directly over USB rather then importing a file.
    In may well be able to Input a series of files which would mean the board having an App on the computer to save the files to then read.
    This would require learning some new skills and take a while to set up.
    Although getting Pic into iChat and sending them to 1 person in a video chat would inherently be more secure there may be other ways of getting a series of Pic as "video" feed on to a web page or other Broadcast method.
    See EZ Jim's list http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html in the top left hand section and Nannycam at the bottom.
    If the Board can Export in Streaming Flash then also see the items 9 through 12 in this section http://www.ralphjohns.co.uk/page5.html#_othe
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    Essentially I don't think there is an Easy Way to do this.
    11:01 PM Thursday; August 19, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • WCS does not support wall mount orientation of 1131 & 1000 APs w/int. ant.

    I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
    I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
    I am assuming a ceiling mount configuration is all that is supported in the WCS.
    As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
    Any suggestions for dealing with wall-mounted orientation? Have I missed something?
    For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
    For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
    - John

    I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
    I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
    I am assuming a ceiling mount configuration is all that is supported in the WCS.
    As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
    Any suggestions for dealing with wall-mounted orientation? Have I missed something?
    For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
    For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
    - John

  • Zfs destroy DOES NOT CHECK NFS mount file-systems

    I asked this question twitter once and the answer was a good one, but I did some checking today and was surprised!!
    # zfs destroy mypool/home/andrew
    The above command will destroy this file-system no questioned asked but if the file-system is mounted you will get back the Device busy and if you have snapshot then they will be protected as well
    server# zfs destroy mypool/home/andrew
    cannot unmount 'tank/home/andrew
    server# zfs destroy dpool/staff/margaret
    cannot destroy 'dpool/staff/margaret': filesystem has children
    use '-r' to destroy the following datasets:
    dpool/staff/margaret@Wed18
    dpool/staff/margaret@Wed22
    BUT?
    server# zfs destroy dpool/staff/margaret@Wed18
    server# zfs destroy dpool/staff/margaret@Wed22
    NFSclient# cd /home/margaret
    NFSlient# ls -l
    drwx------+ 2 margaret staff 2 Aug 29 17:06 Mail
    lrwxrwxrwx 1 margaret staff 4 Aug 29 17:06 mail -> Mail
    drwx--x--x+ 2 margaret staff 2 Aug 29 17:06 public_www
    server# zfs destroy dpool/staff/margaret
    server#
    GONE!!!
    I will file a bug report to see what Oracle say!
    Comments?
    I think there should be a hold/protect of file-systems
    # zfs hold dpool/staff/margaret
    Andrew

    The CR is already filed:
    6947584 zfs destroy should be recoverable or prevented
    The zfs.1m man page, which covers the mounted case and the ZFS admin guide are pretty clear
    about the current zfs destroy behavior.
    http://docs.oracle.com/cd/E23824_01/html/821-1448/gamnq.html#gammq
    Caution - No confirmation prompt appears with the destroy subcommand. Use it with extreme caution.
    zfs destroy [-rRf] filesystem|volume
    Destroys the given dataset. By default, the command
    unshares any file systems that are currently shared,
    unmounts any file systems that are currently mounted,
    and refuses to destroy a dataset that has active depen-
    dents (children or clones).
    I'm sorry that you were surprised.
    Accidents happen too, like destroying the wrong file system, so always have good backups.
    Thanks, Cindy

  • "This computer does not support iTunes live streaming." Help?

    Just trying to catch up with the iTunes Festival, but for some reason when I click on the videos in the iTunes store, that little notification about "This computer...." shows up.
    What should I do?

    I am trying to figure this out too.
    this is what I have tried so far
    - using the iPhone app I was able to watch Adele live on my iPhone 4.
    - on my Windows 7 PC, using the same itunes account as on my phone, I was able to watch the reply of Adele.
    but, while on my work Computer (Windows Vista) and using the same itunes account as mentioned above, I am unable to view the Adele replay.
    both PC's are running iTunes 10.3.1 and using the same iTunes account.  The difference is the Windows version, but you post says you are using Windows 7, which I was able to get the reply to work on.
    I am in Canada.

  • Expdp fails to create .dmp files in NFS mount point in solaris 10,Oracle10g

    Dear folks,
    I am facing a wierd issue while doing expdp with NFS mount point. Kindly help me on this.
    ===============
    expdp system/manager directory=exp_dumps dumpfile=u2dw.dmp schemas=u2dw
    Export: Release 10.2.0.4.0 - 64bit Production on Wednesday, 31 October, 2012 17:06:04
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31641: unable to create dump file "/backup_db/dumps/u2dw.dmp"
    ORA-27040: file create error, unable to create file
    SVR4 Error: 122: Operation not supported on transport endpoint
    I have mounted like this:
    mount -o hard,rw,noac,rsize=32768,wsize=32768,suid,proto=tcp,vers=3 -F nfs 172.20.2.204:/exthdd /backup_db
    NFS=172.20.2.204:/exthdd
    given read,write grants to public as well as specific user

    782011 wrote:
    Hi sb92075,
    Thanks for ur reply. pls find the below. I am able to touch the files while exporting log files also creating having the error msg as i showed in previous post.
    # su - oracle
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    You have new mail.
    oracle 201> touch /backup_db/dumps/u2dw.dmp.test
    oracle 202>I contend that Oracle is too dumb to lie & does not mis-report reality
    27040, 00000, "file create error, unable to create file"
    // *Cause:  create system call returned an error, unable to create file
    // *Action: verify filename, and permissions                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Unable to do expdp on NFS mount point in solaris Oracle db 10g

    Dear folks,
    I am facing a wierd issue while doing expdp with NFS mount point. Kindly help me on this.
    ===============
    expdp system/manager directory=exp_dumps dumpfile=u2dw.dmp schemas=u2dwExport: Release 10.2.0.4.0 - 64bit Production on Wednesday, 31 October, 2012 17:06:04
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31641: unable to create dump file "/backup_db/dumps/u2dw.dmp"
    ORA-27040: file create error, unable to create file
    SVR4 Error: 122: Operation not supported on transport endpoint
    I have mounted like this:
    mount -o hard,rw,noac,rsize=32768,wsize=32768,suid,proto=tcp,vers=3 -F nfs 172.20.2.204:/exthdd /backup_db
    NFS=172.20.2.204:/exthdd

    Hi Peter,
    Thanks for ur reply.. pls find the below. I am able to touch the files while exporting log files also creating having the error msg as i showed in previous post.
    # su - oracle
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    You have new mail.
    oracle 201> touch /backup_db/dumps/u2dw.dmp.test
    oracle 202>

  • Does file share preview support NFS for mounting in linux?

    I've been experimenting with the file share preview and realized that cifs doesn't really support a true file share, allowing proper permissions.
    Is it possible to use the file share with NFS?
    thanks
    Ricardo

    RicardoK,
    No, you can't mount an Azure file share via NFS. Azure file shares only support CIFS (SMB version 2.1). Although it doesn't support NFS you can still mount it to a Linux system via CIFS. Install the "cifs-utils" package ("apt-get
    install cifs-utils" on Ubuntu). You can then mount it manually like this:
    $ mount -t cifs \\\\mystorage.blob.core.windows.net\\mydata /mnt/mydata -o vers=2.1,dir_mode=0777,file_mode=0777,username=mystorageaccount,password=<apikeygoeshere>
    Or you can add it to your /etc/fstab to have it mounted automatically at boot. Add the following line to your /etc/fstab file:
    //mystorage.blob.core.windows.net/mydata /mnt/mydata cifs vers=2.1,dir_mode=0777,file_mode=0777,username=mystorageaccount,password=<apikeygoeshere>
    It's not as good as having a real NFS export, but it's as good as you can get using Azure Storage at the moment. If you truly want NFS storage in Azure, the best approach is to create a Linux VM that you configure as an NFS file server and create NFS
    exports that can be mounted on all of your Linux servers.
    -Robert  

  • Where does Disk Utility define NFS mounts?

    Hi, I used to use Disk Utility to define a NFS mount point for my Drobo, but then I sold the Drobo and deleted the mount point from Disk Utility.  However, my system.log file shows that rpc.statd is trying to find the Drobo once every hour still.  I double checked and there is nothing listed in auto_master, so the only place I can think of that Disk Utility defines the mounts within is Directory Services but I can't find where.  Does anyone know where Disk Utility defines NFS mounts and how I can clear it out?

    Mountain Lion NFS Mounts Missing In...: Apple Support Communities

  • Nfs mount point does not allow file creations via java.io.File

    Folks,
    I have mounted an nfs drive to iFS on a Solaris server:
    mount -F nfs nfs://server:port/ifsfolder /unixfolder
    I can mkdir and touch files no problem. They appear in iFS as I'd expect. However if I write to the nfs mount via a JVM using java.io.File encounter the following problems:
    Only directories are created ? unless I include the user that started the JVM in the oinstall unix group with the oracle user because it's the oracle user that writes to iFS not the user that creating the files!
    I'm trying to create several files in a single directory via java.io.File BUT only the first file is created. I've tried putting waits in the code to see if it a timing issue but this doesn't appear to be. Writing via java.io.File to either a native directory of a native nfs mountpoint works OK. ie. Junit test against native file system works but not against an iFS mount point. Curiously the same unit tests running on PC with a windows driving mapping to iFS work OK !! so why not via a unix NFS mapping ?
    many thanks in advance.
    C

    Hi Diep,
    have done as requested via Oracle TAR #3308936.995. As it happens the problem is resolved. The resolution has been not to create the file via java.io.File.createNewFile(); before adding content via an outputStream. if the File creation is left until the content is added as shown below the problem is resolved.
    Another quick question is link creation via 'ln -fs' and 'ln -f' supported against and nfs mount point to iFS ? (at Operating System level, rather than adding a folder path relationship via the Java API).
    many thanks in advance.
    public void createFile(String p_absolutePath, InputStream p_inputStream) throws Exception
    File file = null;
    file = new File(p_absolutePath);
    // Oracle TAR Number: 3308936.995
    // Uncomment line below to cause failure java.io.IOException: Operation not supported on transport endpoint
    // at java.io.UnixFileSystem.createFileExclusively(Native Method)
    // at java.io.File.createNewFile(File.java:828)
    // at com.unisys.ors.filesystemdata.OracleTARTest.createFile(OracleTARTest.java:43)
    // at com.unisys.ors.filesystemdata.OracleTARTest.main(OracleTARTest.java:79)
    //file.createNewFile();
    FileOutputStream fos = new FileOutputStream(file);
    byte[] buffer = new byte[1024];
    int noOfBytesRead = 0;
    while ((noOfBytesRead = p_inputStream.read(buffer, 0, buffer.length)) != -1)
    fos.write(buffer, 0, noOfBytesRead);
    p_inputStream.close();
    fos.flush();
    fos.close();
    }

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • When does iTunes supports  AAC+ / MPEG4 radio live streams?

    I like listening radio live streams thru airTunes on my stereo. Unfortunately at the moment the swiss national radio station does not support iTunes as e.g. www.kcrw.com. They answered they will jump one step further to AAC+ / MPEG4 as new standard formats. But of course iTunes does not support this new standard either. Has anyone a clue if iTunes will support these new formats? thanks
    MacBook Pro A1212   Mac OS X (10.4.9)  

    Due wrong chapter in forum closed and reopened: http://discussions.apple.com/thread.jspa?threadID=997046

Maybe you are looking for