Does HttpURLConnection use persistent Connection ?

Hi
Can any one of you know that how to make persistent Connections using HttpURLConnections or how to reuse HttpURLConnection so that i don't need to create a new new connection every time for requested URL ? Let say i am right now connecting with some website using urlobject.openconnection() method. I have configure some request and then read response from that website. Now suppose i want to configure another request to same website, how can i do that? Should i need to create every time new connection with same website using urlobject.openconnection() method or is there any trick by which i can reuse the httpurlconnection ?
How can a client make pipelining request in java? I am using HttpURLConnection class.
Any further comment or suggestions will be appreciated.
Thanks.

Yes. it uses persistent connections by default. It does not support pipelining (many HTTP servers don't support that either).

Similar Messages

How to use persistent connections in HTTP on Client Side

I want to Open a Single HTTP Connection and Post Multiple Requests on that connection to the Server. Please give code examples and please tell can i do it with the HttpURLConnection Class.

i think u can do this by creating threads of code that will be sending the requests.

HTTP persistent connection (keep Alive) problem

Hi,
I'm trying to deploy a RPC web service and I would like to use the HTTP 1.1 keep alive feature (which should be the default).
I generated the server side and client side code using jdev 903. The AS is OC4j 903.
The problem is that the server is sending a âConnection: close:â header in the SOAP response, despite the client sending a âConnection: keep-aliveâ header in the request. This is obviously causing the client to close the connection and open another for the next message.
The documentation implies that the server will always try to use persistent connections, even so, in the file:
<OC4J_HOME>/j2ee/home/config/http-web-site.xml
there is a config option âuse-keep-alivesâ. Setting this to true has no effect.
Iâm guessing there must be another option somewhere to turn on connection persistence.
Can anyone please help ?

Does anyone know whether Oracle Supports persistent connections ?
I tested this on JBOSS and I seems to get better performance.
cheers.

Persistent Connections flag amconsole

Hi all
Just wondering, I'm assuming most installs of portal are using persistent connections flag for http sessions. Initially when i was moving to JES 2004Q2, I was told to not use this feature.
I'm wondering if anyone has seen issues with this, and have had to keep it turned off.. I'd like to turn it on, but wanted to ping the group and see if anyone's seen problems with this.
Thanks
Dave

Ha, I can answer my own question after moving ahead and implementing this..
in my case, i'm running 6.3 portal, with a specific JSS patch, turning persistent connections ON caused immediate issues for me, and I had to turn it back off, to resume SRA stability.
- Gateway would coredump and spit out an hs_error file, naming libnspr4.so as the problem.
So, you may want to watchout for issues related to this setting in your environments.
Dave

Http persistent connection, several request-response same http connection??

-I have a problem: I need to make a sever side java application to comunicate over http/1.1 using persistent connections, in other words: A http client sends an httpRequest to my application, my application receives the request and then sends a response, the httpClient receives the response and sends a second http Request to the application, the application receives this second request over the same connection and sends a second response to the client. All these things would be made over the same connection without closing any socket.
I`m trying to made this for 3 weeks but when the server side application responses the first request, the connection closes.
Anybody can help please???
I don�t speak english very well, sorry!!!!

HTTP has a connection-keep alive feature. If you are using a standard api for HTTP communication and a standard HTTP server you will have this feature enabled already. But it is not good idea to depend on connection keep alive feature because HTTP is not designed to keep track of the state of session on its own.
Why do you want to have it that way?. Cant you implement same requirement using HTTP sessions/cookies

Can use HttpUrlConnection class to connect once to server, then inside loop

Hello there!
I want to ask if can I use an HttpUrlConnection class to connect once to server and then inside a loop and with the same instance send many request to a web service?
What about "persistence connections"?
Regards,
Marcello

It already uses HTTP 1.1 persistent connections and a TCP connection pool behind the scenes. There is nothing to be gained from trying to re-implement that yourself and you won't succeed. HttpURLConnection can be used for exactly one request and one response. The underlying TCP connection is reused until you call disconnect(), but there's not much control you can exert over that.

Oci_close does not release the connection when using DRCP

Hello everyone,
we are currently testing the deplyment of DRCP with 11g. I have the whole thing setup (correctly to my best knowledge), but I am facing an issue. The call to oci_close does not seem to release the connection to the pool as I would expect and therefore we see similar behavior like we were getting without using the DRCP.
Our setup is using two RAC instances running 11.1.0.6.0, I am using PHP 5.1.6 with PECL installed oci8 1.3.4. The DRCP pool is configured and started, each with 100 max servers.
When the webserver is idle it looks, well, idle.
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 0
The script is as simple as it gets:
<?php
$c = oci_pconnect('scott','tiger','IWPPOOLED');
$s = oci_parse($c, 'select * from emp');
$r = oci_execute($s, OCI_DEFAULT);
oci_close($c);
sleep(30);
?>
What I would expect is that the script would connect to the pool, do the work for a tiny moment and then release the connection for usage by other script.
But after I point the browser to the script, I get a 30 second loading time (as expected) but the server is busy all the time, like this:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 1
After the 30 second sleep, it is released and busy servers are back to 0.
If I load the server with ab using 256 connections:
ab -n 1000000 -c 256 -k http://mywebserver/ocitest.php
the pool is maxed out and the connects are stalling:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 95
2 95
My network config for this service is following:
IWPPOOLED =
(DESCRIPTION =
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.33)(PORT = 1521))
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.34)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = IWP)
(SERVER=POOLED)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=5)
(DELAY=3)
The phpinfo() look like this:
OCI8 Support enabled
Version 1.3.4
Revision $Revision: 1.269.2.16.2.38.2.20 $
Active Persistent Connections 1
Active Connections 1
Oracle Instant Client Version 11.1
Temporary Lob support enabled
Collections support enabled
Directive Local Value Master Value
oci8.connection_class IWPAPP IWPAPP
oci8.default_prefetch 100 100
oci8.events On On
oci8.max_persistent -1 -1
oci8.old_oci_close_semantics Off Off
oci8.persistent_timeout -1 -1
oci8.ping_interval -1 -1
oci8.privileged_connect Off Off
oci8.statement_cache_size 20 20
I am using the instant client for 11g
Any ideas?
Thanks!
Michal

Don't forget to use oci_free_statement($s); See "Closing Oracle Connections" in The Underground PHP and Oracle Manual. (I was just simplifying this example today for the next release of the manual).
You may also see the "dedicated optimization", where a pooled server in a non- maxed-out pool is retained (unless needed by another PHP process) under the assumption that the initial PHP process might become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf
Feel free to email me offline (see my profile) if there are questions/data you don't want to post.
cj
Edited by: cj2 on Oct 16, 2008 8:12 AM

It appears that Adobe Air does not support persistent HTTP connections?

As far as we can tell, Adobe Air does not support persistent HTTP connections via KEEPALIVE
Thus a new connection has to be established to the server, making certain types of network intensive applications slow.
Can anyone confirm if this is correct - is there any way to get Adobe Air to support KEEPALIVE and maintain persistent server connections?
a

I am trying to get 3.3 Beta 2 with Flash Builder 4.6 on Windows 7 x64bit to work. But still no luck.
I have Flash Builder 4.6 on Win7 to work no problem.
I have updated the playerglobal.swc to 11.3 using http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/flashplay er11-3/flashplayer11-3_p2_playerglobal_041812.swc
but still run into the same problem below:
I can't go through the steps to create a new Flex Mobile Project because of the following error "Air 3.3 Beta does not support mobile projects".
However, I have no problem creating a Flex Project (Web & AIR) and ActionScript Mobile Project.

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

How long does it take to connect to Wi-Fi the first time I use my Ipad? It's been over 30 minutes. I see that it wants to connect but it keeps on turning.

It should not take very long. Up to thirty seconds tops depending on your Wi-Fi network.
Try rebooting your Wi-Fi router. Turn off the router for 30 seconds then turn it back on. After the router completes its startup routine and indicates a good connection to the internet start you iPad again and see if it will connect.
If you still have problems you might try connecting to a different Wi-Fi network. Maybe one at your local coffee shop or library.

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

Does ODBC SQLDriverConnect allow connections without using tnsnames.ora?

I am trying to find out if the Oracle ODBC driver supports a connection attempt through the SQLDriverConnect() ODBC API function without the need to use the tnsnames.ora file. In other words, I would like to pass into the SQLDriverConnect() function the connection string information that would normally be found in the tnsnames.ora file. The purpose of this would be to force the ODBC driver to bypass reading the tnsnames.ora file entirely and simply use the connection information I pass into the connection buffer in the SQLDriverConnect() function.
If this is possible, can someone explain how to do it? I've tried what I think should have worked, so I'm either not doing this right or this functionallity is not supported by the driver.
Thank you.
-Dave

You might try logging a support request to see if that functionality got restored at some point. My recollection is a year or two old...
The Easy Connect syntax is just another feature of the TNS layer, so it should be available to any apps using the 10g client.
The documentation discusses using the Easy Connect Naming Method in some detail. I've not used it with the Oracle ODBC driver, but it should just work.
Justin

Which ports does Webi Rich CLient use to connect to Universe etc..

Hello together,
we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
It will always say universe not found. Login to rich client and everything else is possible.
It's not an authorisations problem, inside the network people can run the programs fine.
Thank you

Hi,
i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
Regards,
Ramu.
Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

Iphone used to connect to internet site when email had reference to the site and I requested it. iphone stopped doing this. How do I get it to resume doing it?

iPhone 4 used to connect to internet site when email had reference to the site and I requested it. iPhone stopped doing this. How do I get it to resume doing it?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

Does HttpURLConnection use persistent Connection ?

Similar Messages

Maybe you are looking for