Does iTunes have a default password for initial encrypted backups?
I have an iPhone that was connected to iTunes for the first time today. It is a company device and IT has set a policy to require backups to be encrypted.
When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before. Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine. However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup. I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?
Caronold -
I have the same problem when i updated to iOS6 3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
Even the folks at genious bar said : good luck!!
A Third party software that can decrypt?
Similar Messages
-
I forgot to setup a password for my encrypted backup using iTunes
I was trying to back up my iphone4 using encrypted backup, but i forgot to setup a password. Now, i am trying to restore my iphone from this encrypted backup, but i don't know the password. I did not setup a password, is there a default password ?
The backup encryption passcode has nothing to do with locking a user out of their backup.
If the encryption passcode has been forgotten, nothing can be done. There is no reset for the encryption passcode.
Delete the backup and create a new one. -
How do I retrieve a forgotten password for my encrypted backup?
Ive set a password for my backups on iTunes 10.2.2. and I have forgotten it! There is no "Forgot your password" button anywhere!! How do I get past this crap???!!!
I'm sorry you forgot your password, and have to recreate a backup of your phone.
But encrypted files, and passwords are your responsibility to save.
Hammeredd wrote:
What idiot came up with a password system which has no failsafe?
There are plenty of systems that do not have failsafe for lost passwords.
My Visa and bank cards do not have a "failsafe" pin number.
Encrypted folders, disk images e.t.c do not have failsafe passwords.
What the encrypted back up does is encrypt your data using a key (the "password") that you supply.
In order to have a "fail safe" as you put it, the key would have to be saved somewhere else.
This then it would have to be stored on your computer.
But would you need it also protected? Yes, otherwise it is a useless password.
They could put it in your keychain, which has a password to protect it.
But what if you forget keychain password?
Where should Apple put a failsafe copy of your keychain password?
How about in another encrypted file, with a password.... what if you forget that password?
This could go on forever.
...every other system we use has a facility to either email your password to you or have you answer a number of security questions to change it.
Are you suggesting that Apple store all encrypted file passwords on their servers?
I am sure then there would be an uproar over Apple being "Big Brother".
no security system is worth losing all your information, this must be a mistake.
No mistake. This is normal practice.
There is also an option to delete your iPhone if the wrong passcode is put in 10 times.
I have that.
If someone tries to get into my phone I would rather have all the data deleted.
But then I back up data, and save passwords.
THERE MUST BE A WAY OF RECOVERING THIS BACKUP INFORMATION!!!!
There is not. The data is encrypted.
That's the point, no one can get it; unless they apply and very complicated decryption system and spend a lot of time on it (like the CIA)
otherwise my intention to buy my partner an iphone has just bit the dust. And this one will be going as well.
So because you made a mistake in not reading, and not saving your password?
There is a clear warning when you choose to encrypt your backup.
This really is a case of you not taking responsibility for your own mistake.
You made a mistake.
Now step up and accept it; and don't make it again.
What you can do in future is create a "note" in your keychain and save your passwords there if you are prone to losing passwords. -
What is the password for the ipad backup,
What is the password for restore, is it different than the other password used to view my account
There is no default password for an encrypted backup. That is a password that the user sets up. Only you will know what password you used.You would have set up the password. If you don't know what the password is for the backup, you will not be able to restore from that backup.
-
I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?
Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G. -
HT4335 Does Itunes have a solution for playing music in a business setting?
Does Itunes have a solutions for playing music in a business setting? Can you play your downloaded music in a business-overhead speakers?
Presuming you are referring to the iTunes Store, tracks purchased from that service are for personal use only and are not licensed for use in any commercial setting. You will need to either find a commercial service to provide music (easiest by far, though perhaps not the cheapest), or buy the appropriate CDs and then obtain a license from the various rights clearinghouses for playback in commercial use.
Regards. -
Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
I haven’t been able to find any.
Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.Thanks for the rapid response to my enquiry.
I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
Regarding QuickTime.
Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
The experience has really put me off buying any additional video from the iTunes Store.
Back to DVDs. -
I just purchased the iMac and was in the process of setting it up and it locked up, requiring me to put in a password. I never established a password, does the iMac have a default password?
If you have been using the mac.com Apple ID to make iTunes purchases recently, then there should be no issues continuing to use it with the new iPhone. I would abandon the new ID as you will never get Apple to merge the two IDs. I have had a mac.com ID for years and continue to use it with my iPhone 4S.
Tell us the issues that you encounter trying to set up the iPhone with the mac.com account. -
Why does itunes have me logging in multiple times to buy a song? I can access everything else fine, but now my account is disabled for some reason although my password was entered correctly... help
I've seen a couple of other threads over the last 10 minutes posting similar problems, so it appears to have affected other people as well - the poster on the first thread has now posted again saying that it's now working for him, so you could give it another try.
Edit : your reply appeared as I was attempting to post this -
The subject says it all - I am new to MaxDB, and did not install the application.
We are trying to update some tables, and get permission errors.
I have the SUPERDBA user, but that user does not have permissions on the <SID>ADM tables.
Is there a default password for the <SID>ADM database user?
I am probably missing something very easy here.SAP customer - yes - I am reviewing the documentation - it leaves a lot to be desired
Here is the output you requested:
dbmcli on GRD>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160032';'20090218';'00160032';'GRD';'grc-app-dev01';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160033';'20090218';'00160032';'GRD';'grc-app-dev01';10;'NO';(null)
'SUPERDBA';'';'SAPGRD';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160045';'20090218';'00160045';'20090218';'00160045';'GRD';'grc-app-dev01';28;'NO';(null)
'SUPERDBA';'';'SAPGRDDB';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160052';'20090218';'00160052';'20090218';'00160052';'GRD';'grc-app-dev01';29;'NO';(null)
I'm not 100% sure what you are looking for on the second query, all I could get to work was this -
select * from tables
which gives a lot of output, here is some:
'SUPERDBA';'SUPERDBA';'ROOTS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B1';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_COMMANDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B2';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_PARSEIDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B3';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'SERVERDBSTATISTICS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000A1';(null);(null);(null);(null) -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database ! -
Does iTunes have or is there an app to see beats while a song is playing?
Does iTunes have or is there an app to see beats while a song is playing?
Thank you, but both of those would be a financial overkill as well I believe (for an occasional once a year need).
I actually designed another flyer with a curved headline about 2 years ago, but saved it simply in a .jpg format (because it was emailed) and cannot remember how I actually did it! It opens now in Preview (default) and get info doesn't tell me which app was used to create it. I've already tried each and every app I have and it's driving me bananas. -
How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?
Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one.
Maybe you are looking for
-
ASA 5505 - Backup and restore to another device of same model and version
How can I backup the configuration of the ASA 5505 on 8.x and restore it to another ASA 5505 with same version? I have tried to save the running config to a file and then copy it to the new device and use the boot config: filename but it doesn't work
-
iMessage problem on my ipod. Whenever someone messages me on imessage and my ipod is locked it'll come up on my lock screen and even if I don't swipe the message, imessage automatically pops up and opens the conversation. How do I stop this?
-
Universe Creation On OLAP Cube(SSAS) throwing error. in BO X1 3.1
Hi Experts, I have created OLAP universe based on SSAS Cube using Microsoft SQL Server 2005 Analysis Services Driver. i have created webi report based on this SSAS Cube,everything is fine but when i create condition in universe level,if i use the sam
-
Serial number creation at the time of GI
Dear Experts, I want to create sreial number and equipment number simultaneously at the time of GI please hel m out with customization settings. Thanks Warm regards Rahul
-
Exported slideshow to Quicktime, music now out of sync
Hello: I created a slideshow in iPhoto with music and transitions in sync, then exported it to Quicktime. When I play it in Quicktime, the music track is slightly out of sync with the slides. Can anyone give me any suggestions? Thanks! Powerbook G4