Does LabVIEW support Mobile and Wireless Protocols?

Does LabVIEW support these protocols;
3G     GSM        PHS   
4G     HCSD        TACS   
CDMA     HSDPA        TDMA   
CDMA2000     iDEN        TD-SCDMA   
EV-DO     Mobitex        UMTS   
FDMA     NMT        WCDMA   
GAN     PCS        WiDEN   
GPRS     PDC        WiMAX    
If it does (some or all) of these protocols, what do I need to install to get VIs supporting these protocols (I mean which packag/ toolkit etc contians supporting VIs/ functions etc)?
Thanks for your help!
Have a very pleasant day!

Most of these protocals are OS-supported. LabVIEW doesn't have lower level interface VIs.
For instance LabVIEW doesn't build a TCP/IP stream with header and stuff, the OS TCP/IP stack deals with that stuff.
For testing the quality of such network there are special hardware (most PXI) and software solutions.
What is it that you want to achieve?
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

  • Does LabView support RS232 Z-Modem Protocols?

    There is the possibility to send Files with z-modem transfer protocol via the hyper-terminal. Is it also possible to do the same thing with LabView?
    Thanks for answers.

    Hello Suttema
    I think Labview does not support zmodem directly. You will have to use a dll or an Antivex.
    The one from adontec (www.adontec.com) looks interesting. You can google for more.
    Hope it helps
    Alipio
    "Qod natura non dat, Salmantica non praestat"

  • Does LabVIEW support the SNMP (Simple Network Management Protocol)?

    I looked at LabVIEW 2014 online help for some info on SNMP.
    A problem was posted in 1996 and updated in 2008.
    Does LabVIEW Support the SNMP (Simple Network Management Protocol)?
    http://digital.ni.com/public.nsf/allkb/4CD3625A939A77DE852564050047D3BD
    This was addressed to LabVIEW version 4.
    What version are we up to now?
    Version 14?
    One solution offered was to get the SNMP VI from Viodia.
    Why should I have to spend another $1,000 for a VI from Viodia after spending $5,000 for LabVIEW Professional?
    Come on National Instruments, offer up SNMP to go with your professional package.
    There seems to be a lot of chatter about SNMP on the forums.
    I’m sure a lot of customers would be happy to have an official LabVIEW VI for SNMP.

    I find it unreasonable to expect that LabVIEW supports out of the box every network protocol that has ever been invented under the sun. You may find SNMP to be the most important protocol on the world but for most programmers it is a niche protocol that they may have heard of but never will happen to come across in their applications. It's in fact pretty low level for a very specific purpose of managing network connected resources.
    On the other hand it is not rocket science either so can be implemented by someone with enough determination on top of the native network interface functions in LabVIEW. Is it a lot of work? Yes, you bet! Is it worth 1000 bucks! If you really need it and your own work hours cost anything more than a few cents per hour, most probably too! If you can live with an implementation that is supporting many but not all features of SNMP, the link on LAVAG is a very good and nice one.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • HELP!!! Does LabView support a thin client or dumb terminal (diskless workstation) type of deployment

    Hello,
    Does LabView support a thin client or dumb terminal (diskless workstation) type of deployment? I have a need to run LabView on some sort of dumb terminal / diskless workstation.  If someone has deployed LabView in this matter, please provide me all the details on how this was accomplished (software, hardware, etc.)
    Thanks

    Sorry, can't call you.
    My first suggestion has nothing to do with LV. It is simply connecting as a remote client to the windows server and controlling the windows session on the server.
    My second suggestion involved writing a program which will contact the PLCs directly using Modbus and get the data from them. As mentioned, you can find some Modbus client implementations for LV by searching the web (or, if you have LV 8 and the DSC module, I think it should come built in).
    My third was writing 2 programs - one would run on the server and one on the client\s. The server program would be responsible for sending the data to the client and the client would be responsible for interacting with the user and sending the appropriate messages to the server. I already gave you pointers on what to search for (the example finder can be found by going to Help>>Find Examples and the site can be searched from the box at the top of the page, but make sure you don't search just the forums).
    In both cases, you would need to design the program and the interface for the user.
    Wi-Fi also has nothing to do with LV and is simply a way to form a wireless network. Any mobile device would almost definitely have support for it and buying an access point to form the wireless network is easy and cheap.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
    Try to take over the world!

  • How does Labview support redundancy?

    I have a control system and Labview will act as the means of control/monitoring. However, I want to have a primary and secondary computer with duplicate system setups. How does Labview support this type of redundancy such that if the primary goes down, the secondary will take control seamlessly.

    Hi,
    LabVIEW has many capabilities that can be combined to create a very robust redundant system. Some of these features include the following:
    Archiving databases periodically
    Monitoring a process on a remote machine
    Executing an application on the backup when the primary has failed
    The most straight forward method of implementing the monitoing is to use discrete memory tags to create a heartbeat. When the heartbeat on the Primary machine has stopped, the backup should take over and begin execution.
    If you have specific questions about how to implement this, feel free to call support by going to www.ni.com/ask.
    Regards,
    Mike

  • Win2012R2 error 364 Content file download failed.Reason: The server does not support the necessary HTTP protocol.

    Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
    System
    Provider
    Name]
    Windows Server Update
    Services
    EventID
    364
    Qualifiers]
    0
    Level
    2
    Task
    2
    Keywords
    0x80000000000000
    TimeCreated
    SystemTime]
    2014-08-27T06:43:36.000000000Z
    EventRecordID
    390
    Channel
    Application
    Computer
    wsus-server.murrcz.local
    Security
    EventData
    Content file download
    failed. Reason: The server does not support the necessary HTTP protocol.
    Background Intelligent Transfer Service (BITS) requires that the server support
    the Range protocol header. Source File:
    /msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
    Destination File:
    C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
    The online help not works:
    Content download has failed. BITS service is not starting or is  stopping during downloads.
    Open a command window.
    Type sc config bits start= auto
    Type net stop bits && net start bits
    Type net stop wsusservice && net start wsusservice
    Start WSUS 3.0: Click Start, click Administrative Tools, then click
    Microsoft Windows Server Update Services v3.0.
    Click Synchronization Results.
    In the Action pane, click Synchronize Now.
    Verify
    Look for the corresponding error event.
    Open a command window.
    Type cd <WSUSInstallDir>\Tools
    Type wsusutil checkhealth
    Type eventvwr
    Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
    The KB922330 not aplicable, ExecuteSQL.exe not present.
    Please help.
    Thanks

    .\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
    This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
    The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
    Either your device is misconfigured, or it needs a firmware update to support the full specification.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Metaprogramming - does LabVIEW support reflection?

    Does LabVIEW support reflectivity in metaprogramming?
    By this I mean, can LabVIEW programatically generate LabVIEW code? Can one write a VI whose output is other, new VIs?
    I think this amounts to a question of whether there is a way to create data having the same type as VIs do, for example by writing binary files. I've looked at .vi files in a text editor, and there is not much I can make sense of.

    tst wrote:
    Ben wrote:
    Of course you may be the FIRST person to harness that critter.
    Definitely not the first. NI created scripting so it could be used (for the vision builder, if memory serves) and use it they do. When you use LVOOP, for instance, you use scripting every time you create an accessor VI. I'm sure there are other places where it's used and it looks like NI is making it more organized. 8.6 has a folder of VIs which seem to translate XML into scripting commands. I haven't looked into this, but I assume this was done because it's used somewhere, not because NI felt like playing around.
    What can I say?
    Yep!
    Ton wrote "(I always had the impression that at least this code makes usefull use of scripting) "
    So NOW what can I say?
    So little apetite, and so much humble pie to eat.
    Ben
    Message Edited by Ben on 01-05-2009 01:59 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Does LabVIEW support Multi Document Format

    Hi
    I had a doubt that does LabVIEW support Multi Document Format like Microsoft Word, execel etc.
    please reply me with some solution if anyone has
    With Regards
    Avni

    Yes, I know very well what MDI is, I just don't know what Multi Document Format is
    Programs like word, excel, etc support reading/writing of files in multiple formats (e.g. *.doc, *.rtf, *.txt, etc. for word or *.xls, *.csv, etc. for excel), so the question could be along these lines. I guess we have to wait for the original poster to come back to clarify.
    LabVIEW Champion . Do more with less code and in less time .

  • Does Labview Support a Hierarchical VHDL Instantiation into Labview Clip Nodes?

    Hello,
    Does Labview Support a Hierarchical VHDL Instantiation into Labview Clip Nodes?
    I followed the available help, and called out the top-level VHDL in my XML file.  Unfortunately, my lower level VHDL components are being read as a Black Box and I am getting an error during compile.  So, what must I do to instantiate hierarchical VHDL code into a clip node?
    Solved!
    Go to Solution.

    Yes, but you need to include the paths to all of your VHDL files in your CLIP XML.  This tells LabVIEW which source files to copy into the compilation directory.  Here is an example (which assumes the source files are in the same directory as the XML):
    <CLIPDeclaration Name="NI Example CLIP">
      <FormatVersion>1.0</FormatVersion>
      <CLIPVersion>1.0.0</CLIPVersion>
      <HDLName>ExampleClip</HDLName>
      <ImplementationList>
        <Path>ExampleClip.vhd</Path>
        <Path>SubComponent.vhd</Path>
        <Path>Fifo32.ngc</Path>
        <Path>ExampleClip.ucf</Path>
      </ImplementationList>

  • Does ISO5 support AirPrint and if not why did they do away with it?

    Does ISO5 support airprint and if not why did it disappear after ISO4? And will it be added back?

    It has gone nowhere.  Nothing has changed in regard to airprint.

  • HT4007 Does Aperture support Images and videos from the new 3D cameras?

    Does Aperture support Images and videos from the new 3D cameras?

    If the camera is listed here OS X Lion: Supported digital camera RAW formats or here Mac OS X v10.6: Supported digital camera RAW formats then the raw image file is supported by Aperture.
    If the camera is not listed then as Keith wrote if it produces JPG's they can be imported into Aperture.
    If you told us what camera you were interested in it might help.
    regards

  • Does LabVIEW support USB 2 interface?

    I need to transfer data from the USB port 2 but I'm thinking of using LabVIEW for interfacing. Does LabVIEW support USB2?

    Yes, you can talk to USB devices using the LabVIEW 7e VISA VIs (see the attached image of the VISA USB Function Palette).
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
    Attachments:
    VISA_USB_Function_Palette.gif ‏38 KB

  • Why Microsoft Office for Mac 2011 does not support Arabic and persian?

    Why Microsoft Office for Mac 2011 does not support Arabic and persian

    For Arabic/Persian on  a Mac, the best app is Mellel.  But TextEdit, Nisus Writer, or OpenOffice should also work OK.

  • Does labview support dll which has sub functions that are static functions?

    Dear all,
    I wrote and compiled a C function into dll to be called by labview. The function calls a sub function. It works fine if it is a normal sub function. However I see that if I declare the sub function to be static, labview will crash. So is it that labview does not support static function in dll?
    Best,
    Miao

    A static function simply means that it is local to the C module that defines it and can't be seen from other C modules in a library. It should not change anything else about how it works.
    So in conclusion it should not make a difference in if it crashes or not but only create possible problems in linking the library. It seems extremely likely that you have another problem in your library that gets somehow triggered more easily when you compile your code with the static functions, but it should not have to do anything directly with the fact that you have static functions in itself.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Does SAP support work and motion study

    Does any of the SAP module supports Time and motion study analysis. Something like the "Maynard Operation Sequence Technique (MOST)"

    Yes..I got a reply from SAP. It is valid for ECC 6 too.

Maybe you are looking for

  • I dont understand creating classes they seem a waste of time and efficiency

    I dont understand why we would want to create classes with constructors and get and set statements... I know that VB and Java did not create these just to have us writing extra code so I am missing something in my thinking. I read about data hiding a

  • Working with MOD files in iMovie 08

    Hello. I have a jvc everio camcorder. I started trying to import my footage with iMovie 08, but as it reads all the cam videos, it is too slow and crashes are common. I decided to copy all my MOD files to hard drive and select only the desired clips,

  • Cant sync from 2 diffrent computers (movies/games)

    I bought 2 games and 2 movies from my other laptop,then sync it to my ipod classic. but now when i try to load all my audio from my main computer it will ask me to either erase and sync or tranfer purchases. also said that this ipod is all ready has

  • Query --Insert no of records in target based on count

    The source table has a count column. Now, depending on the value in the count field of that record, that particular record has to be loaded that number of times with consecutive dates. For e.g. the source table structure looks like: Resource ID Proje

  • Procedure after Automatic Payment it run.

    Dear all, Please suggest what is the procedure after automatic payment is run. what is mostly done. Thanks Nishan