Does MBP 2010 support 802.11n at 300Mbps?, Does MBP 2010 support 802.11n at 300Mbps?

My MBP is connected ro an accesspoint 802.11n router.
It operates at about 140Mbps.
The router has double 20Meg ability but the MBP doesn't seem to do it. Should it?

Hi and thanks for your comments.
Indeed my prblem may be the dual band router and my adjacent hot spots.
I have more than adequate cable odem speed. In fact, although I pay for 10Mbps my ISP provides speeds as hight as it can until the pipe gets "clogged" then slows down to a lower speed.
The reason I obtained the SMCD3GN router was so I could send large video files between my PC and my MAC for multiprocessor processing and archive.
I have attempted to use a channel that is not the same as local heavy users or adjacent to one.
If you have any further comments or suggestions please let me know.
I shall also contact the supplier when the open tomorrow (ita a holiday here in Canada)
Thanks again.
Barry
Here are the airport-option values:
PHY 802.11n
Channel 10(2.4gHz)
RSSI -51
Transmit rate 78
MCS index 12
The network utility shows
The accesspoint is stu up as "greenfield" which I believe means 80211.n only and all my clients can handle 802.11n.

Similar Messages

While looking to upgrade to a new MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. syncing of these must be done through iCloud. This is a deal breaker for me. are there any workarounds?

While looking to upgrade to a newer MBP, found out latest version of iTunes does not support wired syncing of iCal and contacts. Syncing of these must be done through iCloud. This is a deal breaker for me for several reasons. Are there any workarounds or do I have to go back to a PC with my tail tucked between my legs?

When you say wired syncing, are you meaning between an iphone and your mac?

"Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fantastic experience" message with IE 11

Hi All,
I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure
a fantastic experience!" and page is not showing up correctly. I can open Web interface from Chrome without any issues. Also I figured out if I open Developer Tools (F12) in IE Web Interface also works fine and screwed up again
when I close Developer Tools.
What can be wrong with IE11 settings?
Regards,
Oleg

Hi Oleg,
Thanks for your post.
You’re using TFS 2013 Update 4 now?
Please share your IE 11 screenshot within this error message here.
Have you use the TeamCompanion in your TFS Server? If yes, please refer to the solution in this article:
http://www.teamcompanion.com/blog/.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

"A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer."

I am a new RoboHelp user und I want to import content written with Word 2013 into RoboHelp.
I'm using RH HTML 9.0.2 and MS Word 2013 (Office 2013) on a Windows 7 professional computer.
When I try to import a Word-Document (I downloaded and used the example document from Peter Grainge and also tried other Word-documents) I get the following message:
"A supported version of Microsoft Word does not exist. Please install Microsoft Word 2000 or newer."
What can I do?

The error message is wrong as regards the version you need to install. It should state that you need a compatible version and the latest is Office 2010. Even Rh10 does not support Office 2013.
There is a workaround when generating printed documentation but not when importing. You need to install Word 2010 which can co-exist with Word 2013 if you want to retain that for other purposes. Before using Rh to import, run Word 2010 first.
To generate printed documentation using Word 2013, right click Properties in the layout, it works from there.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HT201493 Why when I try to sign in to Find my Friends does it tell me I cannot as my iPhone is not supported with free iCloud service? I do not use find my friends on another device.

Why when I try to sign in to Find my Friends does it tell me I cannot as my iPhone is not supported with free iCloud service? I do not use find my friends on another device.

So, have you created an iCloud account and is your device connected to iCloud?

SharePoint 2010 Search "Did You Mean" | How does it work?

My customer has raised a concern that "Did you mean" functionality works inconsistently and issue is explained as below:
1. When I search for misspelled word such as "Maketting" , search page displays the option "Did you mean ""Marketting"?
2. When I search for another misspelled word "Marktng", I get no result and no "Did you mean" option.
I believe there is a dictionary which maintains the mapping between misspelled word and the correct words but I was unable to track the location whether it is in database or a file system. Has anyone faced this issue and know the solution? Below article
talks about a "Dictionary lexicon" but not sure about the location in SharePoint 2010 farm.
http://www.petestilgoe.com/2009/10/sharepoint-search-how-features-work-part-1/
Thanks and Regards
-DB
DB

Hi Deepak,
“Do you mean” functionality is enabled by selecting Query Suggestions in Search Box web part.
Suggestions are automatically built based on what search results are actually clicked on. It takes 6 clicks within a year for SharePoint to add a suggestion.
However, if an administrator needs to add a suggestion manually this can be done using the SharePoint 2010 Management Shell (PowerShell).
I recommend to use PowerShell to check all the suggestions in the Search Service Application, and then remove the one that you do not need.
$ssa=Get-SPEnterpriseSearchServiceApplication
Get-SPEnterpriseSearchQuerySuggestionCandidates -SearchApp $ssa
Remove a suggestion, such as “Marketting”:
$ssa=Get-SPEnterpriseSearchServiceApplication
Remove-SPEnterpriseSearchLanguageResourcePhrase -SearchApplication $ssa -Language En-Us -Type QuerySuggestionAlwaysSuggest -Identity "
Marketting "
More references about the query suggestion:
http://blogs.technet.com/b/chad/archive/2010/06/24/tip-34-adding-a-sharepoint-2010-search-suggestion.aspx
http://sharepointfieldnotes.blogspot.jp/2011/09/sharepoint-2010-search-query.html
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?

What is the Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?
Aditya Mediratta

Agree with Keith, there is no MB # limit, however there are practical concerns such as DB size and how that effects recoverability as well as performance. In terms of extremes we had one major educational customer that had 35K Mailboxes in
a single database so you can utilize a ridiculous # of mailboxes in a DB if desired. IMO you are better off to keep the # of mailboxes to a reasonable level, i.e. no more than 250-500 mailboxes per DB
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope

Does the oracle golden gate version 11.1.1.1.2 support oracle 12C database ?

Hi experts,
Currently in our environment we are having Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit DB which is replicated via oracle golden gate version 11.1.1.1.2. As per the application team requirement we need to migrate this database to 12C.
Can any one help me on the below queries
Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Are there any syntax changes in oracle goldengate versions which needs to be taken care in extract or replicat parameter files ?
Thanks,
Mushraff Shaik

Hi,
>>Does the oracle golden gate version 11.1.1.1.2 support oracle 12c database ?
Why do you think it will not support 12c database ?
From a Golden Gate perspective you need to create schema and use that. As you are moving to 12c database, ideally you should think of upgrading Golden Gate 11.1 to 12c so you can use new feature such as Multi Threaded replicate etc..
HTH,
Pradeep

Does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? (is there a reason to export audio via optical jack then to an external DAC?

does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?

My suggestion to work around this problem would be to hook up an Airport Express. The AE also has an optical out the same as your iMac. As long as your wireless connection is robust enough you should be able to stream from your iMac to your AE and then have the optical cable connect between your AE and your DAC, which then connects to your Integrated Amp/Receiver/Pre-Amp (depending on your system configuration).
I assume because you are using the optical out and connecting to an external DAC that you are looking for a high level of Audio quality ?

Does anyone know if the GPU on the Surface 3 is supported in the new Lightroom CC?

Does anyone know if the GPU on the Surface 3 is supported in the new Lightroom CC?

I believe it's the same as most GPS devices. It's accurate within 50 feet.
When I'm home. My devices show up scattered around my property even though they are all near each other

I own a iPhone 2G Today He underwent updated Software He gave me this message "The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM

I own a iPhone 2G Today
He underwent updated Software
He gave me this message
"The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.
I did not know what to do??

Follow this article: iPhone: Troubleshooting No Service or No SIM
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No SIM" when a SIM card is installed.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.

When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That cam with your iPhone or vi

When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That came with your iPhone or visit a supported Carrier's store to receive a replacement sim card.

dear sir.
where i get this replacement sim card.i live in bangladesh.not have support carrier in my coutry..
so how get..please help me..

HT4623 The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to r

The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.

I got the same message.
I bought an iPhone 5 at full retail price from an AT&T store. I requested the phone to be unlocked through their unlock portal. The AT&T unlock system asked for the IMEI number, a copy of my receipt showing that I bougth the phone at "No Commitment" price. A few hours later I received a message from AT&T stating that the unlock request was approved. I then followed the instructions to back up the phone and restore it through Itunes. The phone activates normally with the AT&T SIM card. But when I insert my VODAFONE SIM I get the massage "THE SIM CARD... etc.
I tried again to back up & restore the phone 3 or 4 times, no success. I have also allowed 24 hours for the unlock process to complete. Still no luck.
I have checked again on the AT&T Unlock Status portal and it shows "Unlock approved".
Where is the issue here? Do I have to call Apple or return the phone to AT&T and get the unlocked phone through the Apple Store?
Thanks for any help on this.

Does MBP 2010 support 802.11n at 300Mbps?, Does MBP 2010 support 802.11n at 300Mbps?

Similar Messages

Maybe you are looking for