Does Oracle Data Masking pack work with MS SQL Server?

And if so, are other OEM packs required (i.e. MS SQL Server system monitoring plug-in)?
TIA

Hi Martin.
I try to resolve this problem ( sqlserver masking) but I can't found the OBE mentioned.
You or anyone have examples about masking MS SQLServer, because in the Oracle documentation suggest that is possible but not "how do it", except the use of heterogeneous services.
Thanks in advance.
D.

Similar Messages

  • MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012

    I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
    where I can find this book.
    Thanks
     

    Hi Azhar lqbal Gondal,
    According to your description, since the issue regards training and certification,
     I suggest you post the question in the Learning forums at
    http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
     you can visit and post your question on  the SQL Server Forum.
    There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
    Exam content can be found here:
    http://www.microsoft.com/learning/en-us/exam-70-466.aspx
    http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How to get JDev 10.1.2/ADF working with MS SQL Server Identity Column

    Hello JDevTeam & JDevelopers,
    I want to use JDev/ADF with a MS SQL Server 2005 database that contains tables employing IDENTITY Columns.
    Using JDev/ADF and DBSequence with an Oracle database employing before triggers/sequences accomplishes what I am trying to do except I want to accomplish the same thing using a MSSQL Server 2005 database. Unfortunately I cannot change the database.
    I have been able to select records but I am unable to insert records (due to my lack of knowledge) when using MS/SQL Server Identity Columns with JDev/ADF.
    The following are the steps taken thus far.
    Step1: Create table named test in the 2005 MSSQL Server (see script below).
    Step2: Register 3rd Party JDBC Driver with JDeveloper; Using use Tools/Manage Libraries. Create a new entry in User Libraries with the following;
         Library Name     = Ms2005Jdbc
         Class Path     = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu\sqljdbc.jar
         (note: Latest TYPE 4 JDBC driver for Microsoft SQL Server 2005 - free at http://msdn.microsoft.com/data/ref/jdbc/)
    Step3:Create New Database Connection;
         Connection Name = testconn1
         Type = Third Party JDBC Driver
         Authentication Username = sa, Password = password, Check Deploy Password
         Connection
              Driver Class = com.microsoft.sqlserver.jdbc.SQLServerDriver     
              Library = Ms2005Jdbc     
              Classpath = C:\dev\Ms2005Jdbc\sqljdbc_1.0\enu
              URL = jdbc:sqlserver://192.168.1.151:1433;instanceName=sqlexpress;databaseName=test
         Test Connection = Success!
    Step5: Create a new application workspace using Web Application default template
    Step6: In Model project, Create new Business Components Diagram.
    Step7: Create new Entity Object. Goto to connections/testconn1, open tables and drag table test onto the diagram.
    Step8: Generate Default Data Model Components by right-clicking on Entity Object. Except all the defaults.
    When I test the Appmodule I select the view object and can scroll through all the records without error. If I try to insert a record, I get JBO-27014: Attribute testid in test is required.
    Going back to the EntityObject I deselect the Mandatory attribute and re-run the test. Now when I try to insert it accepts the value for testname but it does not update the PK testid like it would using an "JDev/ADF/DBSequence/Oracle database/before trigger/sequence" solution.
    Going back to the EntityObject and selecting refresh on insert does not solve this problem either. Changing the URL connection string and adding "SelectMethod=cursor" did not help and changing the SQl Flavor to SQLServer produced errors in the Business Components Browser. I've tried overriding isAttributeChanged() and other things as well.
    I am totally stuck! Can anyone provide a solution?
    Thanks for you help,
    BG...
    Create table named test
    use [testdb]
    go
    set ansi_nulls on
    go
    set quoted_identifier on
    go
    create table [test](
         [testid] [int] identity(0,1) not null,
         [testname] [nvarchar](50) collate sql_latin1_general_cp1_ci_as not null,
    constraint [pk_test] primary key nonclustered
         [testid] asc
    )with (pad_index = off, ignore_dup_key = off) on [primary]
    ) on [primary]

    Figured it out!
    When using the MS SQL Server 2000 Database with the MS JDBC 2000 Driver you specify the SQL Flavor to SQLServer. However setting the SQL Flavor to SQLServer with MS SQL Server 2005 Database and the MS JDBC 2005 Driver will *** fail ***.
    When working with the MS SQL Server 2005 Database and the MS JDBC 2005 Driver you set the SQL Flavor to SQL92 and the Type Map to Java.
    If using a named instance like I am you would specify the URL = jdbc:sqlserver://<db host ip address>:<listening port>;instanceName=<your instance name>;selectMethod=cursor;databaseName=<your database name> (note: leave out the < >)
    The 2005 Driver Class is different then the 2000 and is specified as com.microsoft.sqlserver.jdbc.SQLServerDriver
    Note: In a default MS SQL Server 2005 installation the listening port will change *** everytime *** the host is restarted! You can override this though.
    For the primary key you need to deselect the Mandatory attribute in the EntityObject editor.
    Set Refresh on insert/update = no.
    Set Updateable = never.
    Now my Primary Keys which get their values from the Identity Column are working with ADF in a predictable way.
    Simple enough but I have been away from this stuff for awhile.
    BG...

  • ¿Does a 11g Oracle Client (64-Bit) Work With a 10g Server?

    Hello, good afternoon!!!
    I have a question: ¿Is it OK to use Oracle 11g Client (64-Bit) with a Oracle 10g Server?
    Thank you so much!!!

    Hello...
    Information:_
    Server: Oracle Database 10g Release 10.2.0.1.0
    Client: Oracle Database 11g Release 2 Client (11.2.0.1.0) (64-Bit)
    Thank you so much for your help!!!

  • Menu Parameter does not work with MS SQL Server

    I need to create a “Menu Parameter” from a “List of Values supporting "All" and multiple selection. This parameter happens to be a list of funds. The DB is SQL Server.
    We have a stored function that takes a comma separated list of funds as a parameter. SQL Server 2005 does not support array lists as bind parameters to stored procs/functions so we do not have a choice.
    The Menu parameter is effectively a bind parameter but I cannot use it directly due to the sql server limitation mentioned above. I really only have 2 choices:
    1) Oracle could generate the comma separated list like many BI tools do. This does not seem to be an option but it could not hurt to ask is this is available.
    2) Convert the bind variable to a comma separated list prior to passing it into the function. This is what I have tried to do below. This also has a problem in that the @liststr variable goes out of scope during execution. I see the error in the BIPublisher logs. This query works fine in Toad and Aqua Data Studio but fails when I run the report complaining about an undefined variable @liststr.
    - Convert bind variable to comma separated list of values
    DECLARE @listStr VARCHAR(MAX)
    SET @liststr =
    SELECT COALESCE ( COALESCE(@listStr+',' ,'') + fgcode , @listStr)
    FROM FundGroup where fgcode in ('AOMF ALL')
    - Pass the csv into the function
    select *
    from PeriodPNLNoNAV('1/1/2012', '1/31/2012', @listStr, '')
    order by fgdesc

    Hi Martin.
    I try to resolve this problem ( sqlserver masking) but I can't found the OBE mentioned.
    You or anyone have examples about masking MS SQLServer, because in the Oracle documentation suggest that is possible but not "how do it", except the use of heterogeneous services.
    Thanks in advance.
    D.

  • Does jsf components in wsad works with any application server ?

    I 'm working with wsad 5.1.2 and using JSFcomponents and testing on the WAS test.
    then i will deploy on jboss AS.
    are the custum wsad componenets depoyable on any AS ?
    thanx a lot

    i used a jsf with data caching on which i put a data grid (a wsad component)
    can you help me to solve the error ?
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: javax.servlet.jsp.JspException: com/ibm/etools/wdo/datagraph/DataGraph
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:821)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:758)
         org.apache.jsp.dataGrid_jsp._jspService(dataGrid_jsp.java:103)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         com.ibm.faces.context.MultipartExternalContextImpl.dispatch(MultipartExternalContextImpl.java:320)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:142)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)
    root cause
    java.lang.NoClassDefFoundError: com/ibm/etools/wdo/datagraph/DataGraph
         com.ibm.odcb.jrender.emitters.WDO4JSEmitter$Transformer.<init>(WDO4JSEmitter.java:116)
         com.ibm.odcb.jrender.emitters.WDO4JSEmitter.Init(WDO4JSEmitter.java:214)
         com.ibm.faces.bf.renderkit.ClientDataRenderer.encodeEnd(ClientDataRenderer.java:76)
         javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:712)
         javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:604)
         javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:527)
         com.ibm.faces.bf.taglib.ClientDataTag.doEndTag(ClientDataTag.java:101)
         org.apache.jsp.dataGrid_jsp._jspx_meth_odc_clientData_0(dataGrid_jsp.java:185)
         org.apache.jsp.dataGrid_jsp._jspx_meth_hx_scriptCollector_0(dataGrid_jsp.java:157)
         org.apache.jsp.dataGrid_jsp._jspx_meth_f_view_0(dataGrid_jsp.java:128)
         org.apache.jsp.dataGrid_jsp._jspService(dataGrid_jsp.java:94)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
         com.ibm.faces.context.MultipartExternalContextImpl.dispatch(MultipartExternalContextImpl.java:320)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:142)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:75)

  • Binding in Prepared Statement is not working with Microsoft SQL Server JDBC

    I ran the following program with sqljdbc4.jar in the class path. There is data in the EMPLOYEE table for the employee name DEMO but the following program is not retrieving data for DEMO. When the same program was run with Merlia.jar in the class path, it was retrieving data for DEMO.
    Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
    Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
    String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
    PreparedStatement sts = con.prepareStatement(sqlSele);
    sts.setString(1, "DEMO" );
    ResultSet rs = sts.executeQuery();
    while(rs.next())
    System.out.println("driverConn.main()" + rs.toString());
    catch(Exception e)
    System.out.println(e);
    e.printStackTrace();
    Can someone help me out from this issue.

    This is the program that I used for testing the behaviour of prepared statement with sqljdbc4.jar. Also included the code for Merlia.jar.
    import java.sql.*;
    public class driverConn {
         public static void main(String [] a)
              try{
              Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
              //Class.forName("com.inet.tds.TdsDriver");
              Connection con = DriverManager.getConnection("jdbc:sqlserver://SERVER23:5000;databaseName=TESTDB", "SYSADM", "SYSADM");
              //Connection con = DriverManager.getConnection("jdbc:inetdae7a:SERVER23:5000?database=TESTDB", "SYSADM", "SYSADM");
              String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ?" ;
              //String sqlSele = "SELECT * FROM EMPLOYEE WHERE EMPNAME like ‘%DEMO%’”;
              PreparedStatement sts = con.prepareStatement(sqlSele);
              sts.setString(1, "DEMO" );
              //sts.setString(1, "%DEMO%" );          
              java.sql.ResultSet rs = sts.executeQuery();          
              while(rs.next())
                   System.out.println("EMPNAME is " + rs.getString(“EMPNAME”) + “”);                    }
              catch(Exception e)
                   System.out.println(e);
                   e.printStackTrace();
    Following are the specifications:
    Version of the Driver:
    Microsoft JDBC Driver 4.0 for SQL Server CTP3
    Downloaded the driver using the link http://www.microsoft.com/download/en/details.aspx?id=11774
    Java Version:
    Java 1.7.0_02
    Database Version:
    Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)

  • Will Upgrade Assistant work with MS SQL Server

    We have ODI installed om MS SQL Server 2005. Current version of ODI is 10.1.3.5 and would like to upgrade to 11.1.1. My question is can we use upgrade assistant to create 2 instances of ODI that has old 10g Repository DB and 11g Repository DB or is Upgrade Asssitant work only when repositories are installed on Oracle 11g.
    Thanks,
    Giri

    It's possible, but it's tough, you'll have to edit the ODI database to change the connection string to one that the new ODI likes, and the java driver to one Java likes.
    For SQL Server 2005, the JAVA_DRIVER it wants is: weblogic.jdbc.sqlserver.SQLServerDriver
    The connection string it will want will be like : jdbc:sqlserver://<host>:<port>;selectMethod=cursor;databaseName=<database_name>;
    Hope that helps, let me know if you want more info.

  • "Hide Instance" setting not working with 2012 SQL Server Database Engine

    I have turned on the "Hide Instance" setting in SQL Server Configuration Manager on my SQL Server 2012 Database Server. After several restarts of my SQL Server/Agent/Browser services, as well as the server, I am still able to browse for the Instance
    from another computer.  I can also find the instance by running the "sqlcmd -L" command.  Is there another step to get this to work?  I have seen other people suggest that you disable the SQL Browser service, but we would like to avoid
    that.

    Hi,
    According to the description, I know the you are able to find the instance in the Browse for Servers window from another computer after turning on the ‘Hide Instance’ setting in SQL Server Configuration Manager. Are you able to connect to the instance as
    well?
    Make sure that the HideInstance has been set to 1 in the below registry key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL11.instancename\MSSQLServer\SuperSocketNetLib
    Note: You may take a backup of the key before make any changes on the registry keys.
    For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    How to back up and restore the registry in Windows
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Does Oracle 8.0.5 work with WLS 7.0

    We are having problems with WLS 7.0, Oracle 8.0.5 and CMP.
    Do anybody know a link or anything to help?
    Or do we have to upgrade the database to 8.1.7 (at least)?
    Regards
    Glenn Petersen

    Hi Glenn
    What is the problem you are seeing? any specific exceptions?
    sree
    "Glenn Petersen" <[email protected]> wrote in message
    news:[email protected]..
    >
    We are having problems with WLS 7.0, Oracle 8.0.5 and CMP.
    Do anybody know a link or anything to help?
    Or do we have to upgrade the database to 8.1.7 (at least)?
    Regards
    Glenn Petersen

  • Course 10778 Implementing Data Models and Reports with Microsoft SQL Server 2012

    Hi,
    I recently imported the virtual machines for the above-mentioned course. I am running Windows Server 2012 Standard edition on my pc. When I tried the first lab exercise, I could
    not open the report in MS Sharepoint Server. The error was to do with the following: "cannot impersonate user for data source 'AdventureWorksDW' ", and also "cannot convert claims identity to windows token sharepoint". I followed all the
    steps in the setup guide.
    Please assist me with this regard,
    Many thanks.

    Hi Zimiso,
    Based on the error message, it seems that the issue is caused by the incorrect configuration of Claims to Windows Token Service (C2WTS) that it was not running under a domain account.
    The domain account used by the Claims to Windows Token Service needs to be granted the following rights through the Local Security Policy:
    Act as part of the operating system
    Impersonate a client after authentication
    Log on as a service
    We can find these settings under Administrative Tools > Local Security Policy > Local Policies > User Rights Assignment. Please note that we should add the service account to the local Administrators Groups ahead.
    Reference:
    http://msdn.microsoft.com/en-us/library/hh231678.aspx
    http://blogs.msdn.com/b/psssql/archive/2012/08/20/sharepoint-adventures-reporting-services-claims-and-one-way-trusts.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Is oracle data masking compatible with DB version 10.2.04?

    Hi,
    We are interested to find out if Oracle OEM data masking pack is compatible with DB version *10.2.04*? We are using OEM version *10.2.05*.
    Regards
    Imran Shafqat
    Sr. Practice Consultant
    EMC Consulting (UK)
    Edited by: 849880 on Apr 5, 2011 11:44 AM
    Edited by: 849880 on Apr 5, 2011 12:09 PM

    Yes it is.
    Checkout *How To Use Data masking Feature In Grid Control [ID 736833.1]* on MOS
    Regards
    Rob
    http://oemgc.wordpress.com

  • What is the use of Oracle Data Masking?

    Hi,
    Iam using HCM 9.2, PT 8.53, DB.11.2.0.2.
    What is this particular navigation does??
    PeopleTools >Utilities> Administration >Oracle Data Masking
    does this encrypts the value in the specified field??
    Suggestions welcomed !!
    Aravind.

    Repeated start/stop or redeploy causes memory leak (7393267)
    Repeated start/stop or redeploy of an application causes memory to leak and the server has to be restarted to clean up the memory. New applications created in JDeveloper 11.1.1.0.1 will be configured with a Weblogic Application Lifecycle Listener to handle this scenario. For older applications migrated to 11.1.1.0.1, the listener will need to be manually added to the weblogic-application.xml of the application to solve this issue.
    <listener>
    <listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
    </listener>
    From : http://www.oracle.com/technetwork/developer-tools/jdev/knownissues-096030.html

  • Data Masking Pack

    I have installed the Oracle Enterprise Manger Control Grid 11g R1 with Oracle Database 10g R2 (10.2.0.4). Now I am asked to install the data masking pack. How can i install the data masking pack?
    Thank you,

    Data Masking Pack functionality is shipped with the Enterprise Manager Grid Control product starting with EM GridControl 10.2.0.4. Click on the Database tab; the links Masking Definitions and Mask Formats are related to Data Masking.

  • How well does the iPhone 5s/5c work with Wind Mobile?

    I'm going to be (hopefully) getting the iphone 5s or 5c soon and I'm trying to decide on which carrier to go with. How well does the iphone 5s/5c work with wind mobile and how fast is the internet with data?

    http://www.windmobile.ca/
    iPhone: Wireless carrier support and features

Maybe you are looking for