Does P7N SLI Platinum support Seagate 1.5T HDD?

I installed this harddisk, but strangely, only 1000G is able to be partitioned and formatted. Is it due to some limitations in BIOS 1.3? If so, when 1.4 is going to be released? Thanks in advance for help.

I am using Vista Ultimate, I tried XP as well, both operation system did not have problem of recognizing the size of HDD as 1.5T. But when it comes to partitioning and formatting, problems came. In the beginning, I created partition like C:300, D:300, E:900, and there was no problem to format C and D. And the formating process of driver E got stuck around 40 something percent and never continued. I calculated the percentage and it was at the boundary of 1000G. And after I reboot the system, I lost all the partitions and the entitle harddisk was not recognizable by any operating system. And I have to use the the utility software called seatool under dos to clear the cluster 0 on HDD to reset the HDD info. Now, what I did is creating 3 partitions that use only 1000G, and left 500G unpartitioned. But it is quite annoying that I could not use the last part. It was actually stated at the P7N SLI Platinum BIOS 1.3 info, the BIOS is now supporting 1000G HDD.... I suppose it means up to 1000G. Is there any work around?

Similar Messages

MSI P7N SLi Platinum Edition Problem with Quad Core.... Missing 2 Cores.. Xp Vis

QUAD CORE READY BUT MISSING 2 CPU CORES.
Im usuing p7n-sli platinum, from msi p35... Now i cant see my 2 cpu cores..... Im only seeing 2 cores? Does this p7n-sli platinum supports quad core? Please help....
Would there be any update? Patch?
P7n s

What CPU revision you have?
Provide screenshot from CPU-Z ===> http://www.cpuid.com/download/cpuz_144.zip
P.S: Topic Locked, since new topic has been opened for the same problem: https://forum-en.msi.com/index.php?topic=115100.0
P.S2: Topics not merged because will cause confusion for future readers, since both topic starters are different persons, but they are talking about the same PC.
P.S3: In short topic continue here: https://forum-en.msi.com/index.php?topic=115100.0 , but with real mainboard's owner.

Does the K8N SLI Platinum support the AMD 64 FX-60?

Does the K8N SLI Platinum support the new AMD 64 FX-60 cpu?
and if not it will with a bios update?
...also same question goes for the FX-57 cpu
Best Regards,
Manolis aka Markoul

Yes
<K8N SLI Platinum CPU Support>

Does k8n neo4/sli platinum support creative 6.1 surround speakers?

I own an MSI k8n neo4/sli platinum mother board with an on-board SB live 24-bit sound chip. I have confirmed that the retail version of the sound blaster live 24-bit pci sound card will support a 6.1 speaker set up (specifically creative labs megaworks 650) with creative labs proprietary plug configuration of having front center, sub, and rear center speakers all on the same (orange) plug. The plug configuration on the back of the k8n neo4/sli platinum is color coded the same as the retail version of the sound blaster live 24-bit sound card. what I need to know is... Does the k8n neo4/sli platinum support a 6.1 surround sound speaker configuration? I can find no documentation in the literature confirming or denying this. FWIW... the creative sound card softwear that came with this motherboard will allow me to configure and test for 6.1 speakers... but I get no sound from my rear center speaker. On testing, the 5.1 speaker configuration works as it should but I am unable to test for 7.1 config as I lack a 7.1 speaker setup. I am using Version 5.12.1.356 of the creative drivers downloaded from the MSI driver support.
Thanks for your time.
Malpighi44

Update...
Last night I noticed that, in windows sounds and audio devices_advanced speaker settings, there is no 6.1 speaker configuration option. (GO to: control panel \sounds and audio devices \sounds and audio devices properties \ volume \speaker settings advanced \advanced audio properties \speakers \speaker setup pull down menu).
I don't know if this pull down menu is generated by windows XP auto detection or the MSI/Creative drivers and .inf files that are installed for the SB 24-bit chip, but it leads me to believe that this MB does _not_ support 6.1 sound.
Can anyone else confirm that this 6.1 speaker option is present or missing in windows with:
1) This MB
2) Windows XP in general
or 3) if it is available to those that have an audigy or 6.1 compatible sound card
Once again...
Thanks for your time,
Malpighi44
My system:
ANTEC SLK3000B ATX CASE
ATHLON 64 3800+ NEWCASTLE
MSI K8N NEO4 PLATINUM SLI
OCZ PREMIER DDR PC3200 2X512MB
2-MAXTOR MAXLINE III 250GB
POWERCOLOR RADEON X800XL PCI-E 256MB VIVO
ENERMAX EG495P-VE NOISETAKER 485W PS
LITEON SOHW-1673S 16X8X16 DVD+RW
LITEON SOHD-16T9S 16X DVD-ROM
1.44MB 3.5IN FLOPPY
WINDOWS XP PRO service pack 2

P7N SLi Platinum - Network & (large) Hard Drive Issues

Hello, everyone. I'm hoping someone can help me out here (though I suspect I'm screwed). Several nights ago, I was sitting at my machine playing some Tera when suddenly I got a blue screen. They've been a pretty rare occurrence for this system, but I realize that from time to time, they happen, so I wasn't all that concerned. I just rebooted and figured everything would be back to normal. Unfortunately, I was wrong. Windows (7 - 64bit) took a noticeably longer time to pull up the full desktop and I noticed an error condition on the network icon in the system tray.
Naturally, I pulled up my network settings and Windows told me that I was on an "Unidentified Network" with "No network access." I figured it was possible that I'd nudged the cable or something, so I looked at it and noticed that, instead of a flashing green light on the Ethernet port, it was flashing orange (this board does normally flash green, right?). I changed ports on the switch and when that didn't help, I changed cables. Still nothing. I installed the latest nForce drivers and still nothing.
That's about the time I noticed another problem. I pulled up Windows Explorer to look for something on my data drive (3TB Seagate) and after an inordinately long time, I realized that it wasn't going to come up. I rebooted again and went into the BIOS settings and, to my horror, discovered that the BIOS, which was showing the drive at its correct capacity before, was now showing it as 800GB.
I have NO idea what happened. It's possible there was a power surge (there was a storm in the distance), but the only two things that are affected are the network and that one hard drive. I updated to the latest BIOS and that didn't help at all, either. So... any ideas? Or am I just going to have to track down a new MB?
Thanks,
Sam

Far as I know, that board is not capable of properly supporting a HDD over 1TB?
http://www.msi.com/product/mb/P7N-SLI-Platinum---P7N-Zilent.html#/?div=BIOS
You can try a power off, PSU power cord pulled, battery removed, CMOS clear and settings reset.

P7N SLI Platinum Unstable with over 2GB ram and/or dual channel memory on.

Hello need some help or to report something to MSI regarding blue screens, freezes when booting Vista 64 (SP1 + all fixes installed) with more then 2GB ram. Single channel mode works (either 1 stick of 2 GB or 3 sticks of 2GB) and is rock stable. Booting with 2 x 2 or 4 x 2 yields instability and blue screens.
I read over Microsoft's hotfix KB929777 however it appears this patch was applied during SP1. http://support.microsoft.com/kb/929777 - when I attempted to apply this hotfix I got the message this update does not apply to your system.
Memory tested in other gaming system using 4 sticks of G.Skill 1066 DDR2 ram and still have the same issues. Other forums like Evga.com, Tom's hardware and 411overkill.com tend to suggest some problem with this new bios version 2.0, written by Nvidia. Some others mention possibly an Nvidia nforce driver issue.
Therefore, under duress during testing - with 1 stick or 3 sticks of ram, all tests perfect and passes all stability tests, good marks in Sandra, plays any game. With 2 or 4 sticks of ram, very unstable won't stay up but for seconds.
Any ideas? (Tested 7 ways until Sunday!)
My other rig, rocks solid and stable with Vista 64.... It's the Evga new mainboard 780i with triple SLI (132-CK-NF78-A1), 8gb of Gskill 1066ddr2, MSI 8800GT (x2 sli mode) Q6600 @ 3.2 ghz - Raid 0 on dual WD caviar 640 gb/sata 3.0gb/sec. Seasonic 700w p/s. 8gb of memory and not a hiccup. Ram 2.0 volts, cpu @ 1.36v. Will handle the memory from both systems with out fault.
Considering I can swap memory back and forth and confirm it's not the sticks, swap graphics boards (own 3 of them!) and rule out that....
Fyi. Any help is appreciated!

Dump question, but have you pickup the correct update e.g. for 64bit? ==> http://www.microsoft.com/downloads/details.aspx?FamilyId=91672C7C-614B-404C-850C-377541E93C18&displaylang=en
"This comes inside SP1 for vista 64, as noted with my other system during the build. "
Better double check it.
Install all four memory sticks and do a memory check with >>Memtest86<< 1st, ensure that no error(s) will comes during testing.
Also how about that?:
Quote from: BOSSKILLER on 07-April-08, 23:55:36
Remove your OC then see how its goes.
"When the system boots in single channel mode (only 2 or 6gb of ram meaning 1 or 3 sticks installed into the 4 slots) its' rock stable. When it boots into dual channel mode (2 x 2 sticks or 2 x 4 sticks) extemely unstable. "
That means, timings are too tight, or they need a bit more vcore help, or some of the memory stick has failure.
"MSI P7N SLI Platinum - MS-7380 - Bios 2.0 on Vista Ultimate 64-bit - all updated."
That BIOS is not for your board, you should use 1.xx

RAID 0 on my board (P7N SLI Platinum)

Hi guys, I'm gonna be honest and admit I'm a beginner when it comes to these kinds of things.
Now thats out of the way, I've got two drives of the same size, revision and manufacturer, so I wanted to set them up in RAID 0 for faster load times and such. Though I don't have any idea where to start with this..
I have Vista 64bit Home Premium,
MSI P7N SLI Platinum
Q6600
8800GT SLI
2x 500gb SATA Seagate Barracuda 7200.11
4gb of RAM
I was wondering if it would be possible for someone to give me a simple, easy to follow step-by-step process for setting up a RAID 0 system. I need help with the BIOS settings, the drivers and where to get them, and anything else (intel matrix if needed??)
The manual doesn't mention how to do it, well..if it does I dont understand it, also I couldn't find any help on google so I thought I would come to a place where people will know about these things.
It's going to be for gaming and general windows use so I want to it to be as performance orientated as possible - I daren't try myself as I don't have the ability to fix it if I really mess it up I will seriously appreciate it if you can help me!
Thanks

here is how I did it:
enter the bois by pressing del, then go to integrated peripherals then to on-chip ata devices. You will see there a setting called raid mode it is set to ide change that to raid mode. Now enable sata1 and sata 2 oh make sure u drives is on sata1 & 2 . now save and exit. As the pc boot up there will a option to press f10 to create the raid. once in the utility change the mode from mirror to stripping(raid 0) , at the bottom of the screen you will see 2 boxes one on the left hand side will have your drives in it now move to the drive with the arrow keys and move both to the right hand side once there press ctrl+x to create the raid or read at the bottom of the screen for the options.
Once your is created load vista normally and then when it asks to what drive u want to install it will be blank remove the vista cd and insert your driver cd for vista. Now click on load then browser then navigate to E:\ChipSet\Nvidia\Vista64\C72+MCP55\IDE\WinVista64\sataraid and click ok a list of driver will appear select all and click next. After this u will be taken back to the screen where you will now see your hard drive click on it and install vista like normal
Hope this was help full as i do it this way

MSI P7N SLI Platinum - no POST, how to use Floppy BIOS upgrade

Component Summary:
MOBO: MSI P7N SLI Platinum LGA 775 NVIDIA nForce 750i SLI ATX, BIOS ver 1.1 (A7380NMS V1.1 022508)
MEM: CORSAIR XMS2 DHX 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W, S-spec: SLB9J (E0)
VGA: EVGA 512-P3-N878-AR GeForce 9800 GTX+ SSC Edition 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI
PSU: Thermaltake Purepower W0129RU 600 W ATX12V SLI Ready
Same problem is occurring as outlined in the following threads:
https://forum-en.msi.com/index.php?topic=119615.0
https://forum-en.msi.com/index.php?topic=120513.0
I've carried out the same out-of-box tests indicated in 119615.0 without success.
Question:
Is it possible to force the existing system to boot to the FDD where the BIOS upgrade (v 1.2) would be stored ready for use? If yes, kindly outline the necessary steps to be carried out and please point me to the correct BIOS upgrade link for this configuration. If all else fails, MOBO can be exchanged but if BIOS can be upgraded via this method, I prefer this approach. I don't have access to an alternative CPU, so that approach is far less than ideal. Thanks for your assistance.

Is it possible to force the existing system to boot to the FDD where the BIOS upgrade (v 1.2) would be stored ready for use?
Yes, in theory it is possible to try an AMI BIOS Recovery Flash. However, in case their are other problems that are not visible because of the current problem, it is rather risky. If there is a memory problem or something similar that is currently undetected, the system may crash during flashing and your board will be rendered useless.
Quote
f yes, kindly outline the necessary steps
What you need:
- you need an internal floppy drive (properly connected to the board and 100% intact)
- you need an empty & formated floppy disk (make sure you check it for errors before you use it)
- you need a PS/2 Keyboard
What you have to do:
- download the latest BIOS-Archive file from here:
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
- extract the BIOS File (e.g. A7380NMS.120), rename it to AMIBOOT.ROM [not AMIBOOT.120.ROM] and copy it to the floppy disk
- insert the prepared floppy disk into the floppy drive attached to the P7N SLI Platinum and Clear CMOS with main A/C power cable removed from PSU
- start the system and hit CTRL + HOME to force the system into recovery mode
If that does not work, try a different floppy drive & disk. Don't complain is the system crashes during flashing if the recovery flash starts (system stability is your responsibility).
If you can't get the recovery routine to start and read the AMIBOOT.ROM file from the floppy disk, you need to install a supported processor.

P7N SLI Platinum Virtualizaton?

Hello,
I have been searching but can't seem to enable the CPU Hardware Virtualization on this mainboard. I thought this had to be supported by the CPU (which is the case, I have a E6750), but apparently the mainboard also needs to support this? Or does this feature has an other name on the BIOS?
Thanks in advance,
Photubias

Quote from: AaronYuri on 31-May-08, 05:41:45
Go to "Advanced Chipset Features" > "CPU Feature" > "Virtualization (Technology [not always there])" > Choose either enabled or disabled.
Yes, on the P7N SLI Platinum Bios version v1.1 it isn't there, is there another way or is there an update planned?
It is also not listed in the mainboard Bios manual.

Having a hard time OC'ing my Q6600 on the P7N SLI platinum!!

Well, first of all, I am new here, so hello to you all guys!
I just purchased the p7n yesterday. I had a P6N SLi-V2 before and wasn't able to get over the 3.0 GHz (stable)! I thought the P7N will a much better overclocker but find myself having a really hard time get it over 3.0 GHz again!?
Tried different versions of the bios (1.0,1.1,P04 and now 2.0) with no succes! Maybe anyone can help me out here and maybe share some bios setup? Will really appreciate it
My rig:
Q6600 C2Q G0-stepping
Tuniq Tower 120 CPU cooler
P7N SLI Platinum
1 x 2 GB TakeMS PC6400 DDR2 RAM
2 x MSI NX8800GT OC 512MB
1 x 200 GB + 1 x 250 GB HD
Cooler Master Extreme Power 650w

Quote from: troopertroop on 20-April-08, 22:22:09
Man, this turns out to be like a disaster :S:S I tried everything and now it won't even be stable @ 3.0 GHz with vcore 1.35, vram 2.2, fsb vtt 1.45, nb 1.4 and SB 1.5 (random reboots like crazy!). I have the intention to get some better OC's going from a p6n sli v2 to this board and it's even doing WORSE??????? The only weakpoint I can think about is my single stick 2GB TakeMS pc6400, but I never go over the stock speed of 800 MHz, so can that still be a bottleneck even at stock speed or even lower?
Any help will be welcome...
I found out the hard way.........if you are not running memory from the QVL list with this mobo, you will have problems with it. I was running mine with team xtreem 3-3-3-8 microns and all I had was errors and corruption when I overclocked. I had to reformat and switch back to the performance bios and now running corsair dominators 3-4-3-9 and this is the first set that can run at 1200 mhz at 5-5-5-18 2T 2.2 v with the fsb at 1600. I 'm using an E8400. I have read that using non approved memory and this board will not overclock properly. The only non approved memory that works in my system is geil ultra 8000's and these are the originals running D9GCT's. For stability you should try OCZ, Corsair, Mushkin, Buffalo, Kingston. I have also had problems with crucial ballistix as I've found most of there modules are in someway defective and or not compatible with MSI and have rma multiple sets. I have a previous post going from P6N FI to P7N and have listed all the memory that I have tried on this board. OCZ and corsair work the best and geil can be used but will not oc past 1142 mhz with stability. I think after a few bios updates this board will be able to use more different types of memory without stability issues.

Problem with my p7n sli platinum

Hello,
i just bought the P7N SLI Platinum for my new system and use an old ATI X1800XT as my gpu.
after finished installing all the hardware,then i tried to install a fesh copy of windows xp...
the problem is, every time my computer tried to login into the windows.. a blue screen will appear..
i suspect the problem is due to the x1800xt..therefore i tried to use it with my old intel motherboard but it can login into windows perfectly well..
does anyone know what the cause of this problem? is it because i'm using ati card with nvidia chipset?
please everyone help me!!

Quote from: BOSSKILLER on 23-November-08, 21:04:26
STOP: 0x0000001E
* There is insufficient disk space on the drive on which you installed Windows.
* There is an outdated or incompatible third-party driver (or drivers) installed on your computer -- for example a faulty video driver.
* There are system BIOS incompatibilities.
Finally, my system is now working perfectly but I'm still not sure what is the cause for all of this madness.
I didn't change any of the hardware or the drivers.
I don't think this is because of the insufficient disk space because after many series of failure with this board, I have tried to install a fresh windows copy using the same hard drive with my previous motherboard and everything seems to be running smoothly...it could finish the installation process..and safely loading into windows...
Then when I tried with this board again, still no improvement at all...i tried again..again...and again...until i was frustrated enough to made some random changes in the bios settings and FINALLY...it works!!..
I have no idea what were the changes that I've made in the bios...maybe it was just my luck....but I do notice the change in my cpu vcore..before this, it was running at 3.0GHz with default vcore of 1.080v...but now, the default vcore has suddenly changed to 1.250v with the same frequency of 3.0Ghz...and I couldn't find any way to return the voltage back as before..is this normal? I thought E8400 with E0 stepping should have lower vcore...isn't it?

New P7N SLI Platinum Boot Issue with PS/2 Keyboard [Solved but RAID problem now]

This issue taken me back !!!! Never thought I might face issue with a PS/2 Keyboard.
Here it is.. I just assembled my new system...
P7N SLI Platinum Motherboard
E8400 CPU
EVGA 256-P2-N751-TR GeForce 8600 GT Video Card
Creative Soundblaster Audio Card
So, before I boot, I connected good old PS/2 Keyboard. The POST Screen comes up that says Press DEL to enter BIOS Setup... but then, it reboots.. indefinitely... I have no idea why it does that. However, if I boot the PC with no PS/2 Keyboard connected, POST screen comes up and that's it.. (no reboot). So, you see, I cannot proceed further in anyway.... I cannot go beyond POST without a keyboard, but then with the keyboard it reboots indefinitely... kinda catch 22 situation
Any suggestion / ideas that anyone can offer here???

Hello Folks... it took long time to "solve the issue that had to begin with"....
I purchased a cheapo Celeron processor to get into the BIOS and update it... but it didn't even work... I couldn't boot at all. So, I called MSI and they asked me to RMA it. They replaced my MOBO with the latest BIOS - which was good news
So, now, I'm able to boot - good news...
Now, this is an upgrade for me.... from my previous MOBO. My boot drive was RAIDed (RAID 0). So, now, I will have to RAID my drives again and run Win XP repair. I was able to RAID my drives and all good... now, I went into Windows installation and did F6 to install NVIDIA Raid.... but, here is my problem, when the prompt asks me to input the floppy drive, and when I did it.... it re-prompts me to put the floppy drive again... I see that the floppy drive is read... but, for some reason it doesn't detect the files in there properly.... I downloaded nVidia C72+MCP55 SATA RAID / AHCI Driver (For floppy driver) for windows xp 32-bit and copied the sataraid folder contents into the floppy. Now, here I am stuck again....
Anybody experienced this problem?

Help: can't overclock Q9300 - MSI P7N SLI Platinum !

I tryed everything, i just can't overclock Q9300...way ?. tryed alle beta bios..please help !!
Overclock only to 340 makes PC freeze
MSI P7N-SLI PLATINUM nForce 750i SLI
Intel Core 2 Quad Q9300 2.5GHz 6MB FSB1333
Arctic Freezer 7 Pro socket 775
Corsair DDR2 PC2-800 2GB CL4 kit XMS2 * 2 = 4 GB
Samsung Spinpoint T166 320GB 16MB 7200RPM SATAII
Asus GeForce PCI-E 8800GT 512MB
Antec Sonata 3 Earthwatt 500Watt HD + eSata front
All bios here i have tryed, but no luck:
http://forums.hardwarezone.com.sg/showpost.php?p=27386192&postcount=5
Somebody had luck to overclock Q9300 on P7N-SLI Platinum ? please post info

Try with mem settings auto and only adjust Vdimm to vendorspecs.
Did you try BIOS V1.1 from MSI : http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
This did solve some memory issues.
If so try, if you can, QVL memory and see if problem persists.
Hope this helps , good luck and keep us posted
Also be sure that your on manual and not linked, this will give problems too, when fsb divider gets higher then memory divider.
Furthermore, by using non qvl mem, the NB and fsb vtt are very depending on eachother.
I had the same with my board , the only difference with yours is the cirque pipe cooling and an extra chip for yorkfield support , but it is do-able

MSI P7N SLI Platinum

Hello,
I have a mainboard MSI P7N SLI Platinum that doesn't boot. I connected it out of the case, tried different CPU's, different PSU's, different graphic cards, different memory modules ... all without success. When I connect the PSU a red LED goes on, when I try to boot it a blue LED goes on and the CPU cooler starts turning, nothing else happens, no beeps, nothing on the monitor ...
I also tried downloading the latest bios, put it on a floppy and named it AMIBOOT.ROM, than connecting an internal floppy drive and press ctrl-home while powering on (found this hint on the forum). Nothing happens, nothing on monitor, no activity on floppy drive (even tried different floppy drives and cables )
Does anyone know something else I can try?

Quote from: defrissen on 11-February-10, 23:21:02
Hello,
I have a mainboard MSI P7N SLI Platinum that doesn't boot. I connected it out of the case, tried different CPU's, different PSU's, different graphic cards, different memory modules ... all without success. When I connect the PSU a red LED goes on, when I try to boot it a blue LED goes on and the CPU cooler starts turning, nothing else happens, no beeps, nothing on the monitor ...
I had this same exact problem today. All seemed to work but nothing on monitor. I first thought my graphics card is the issue, but the fan was turning so i decided not to think that was it.
I had a dvi to vga adapter on the other end of the graphics card cable, so i was thinking if that was the issue. I changed the cable to dvi/dvi and WOW, it worked!!!
I dont know if this is the MSI mother board issue or my graphics card CLUB 3D 8800gt, but that fixed it and it has been on for 5 hours now.
But what i came here to ask was the on board LEDS. Is it normal to have RED and BLUE led?
The red led looks like it's a wrning of some kind but it comes on when you turn on the PSU. So is it ok to have these lighting?

MSI P7N SLI Platinum Compatibility with Dominator PC10000

Hello forummer,its been a while since I last posted..I wanted to ask
I wanted to buy a MSI P7N SLI Platinum 750i motherboard and wonder if it fits my Corsair Dominator DDR2 1250MHz PC10000..
I read reviews that the most it can support is DDR2 800,hmm can it support the RAM ?thanks for ur help guys

Quote from: asamkipas on 15-March-09, 16:13:51
Hello forummer,its been a while since I last posted..I wanted to ask
I wanted to buy a MSI P7N SLI Platinum 750i motherboard and wonder if it fits my Corsair Dominator DDR2 1250MHz PC10000..
I read reviews that the most it can support is DDR2 800,hmm can it support the RAM ?thanks for ur help guys
DDR2-1250 is an overclocking rating. The memory modules should run fine @DDR2-800. Maybe you can stably overclock the modules to higher speeds, however, nobody can really guarantee you that those sticks will be able to operate @DDR2-1250 (625 MHz) on this board/chipset.

Does P7N SLI Platinum support Seagate 1.5T HDD?

Similar Messages

Maybe you are looking for