Does the error of the error cluster appear at invoke node?

I use a "Open VI Reference" with "Invoke Node: Run VI and Wait until Done= True" if the VI run and have an error. Does the error return to the caller/server?

No, you will need to use a CallByReference node to run the VI and then you can see the error cluster (if it is wired in the called VI's connector pane). Another option is to use the "Get Control Value" VI Server Method on the VI, to return the "error out" cluster of the called VI after the Run method is completed.
-Jim

Similar Messages

  • Why do I get an error 1000 when using vi server with invoke nodes?

    I use the invoke nodes with set control value and run vi. I want to use the called vi on the same machine and in parallel and I do not want to wait until it is done. If I set wait until done to true it works, if I set it to false I get the error message. Why is that and how can I solve that problem??

    Hi,
    Using LabVIEW 7 I was able to do what you want. I modified an existing example. The main vi will load the a second VI, and then the main VI will do "set control value" on a numberic labeled "Numeric" and you'll be able to see that it is changing the control value.
    I've attached the modified VI.
    Attachments:
    parallel.zip ‏148 KB

  • Error -2146959355 server execution failed on ActiveX Invoke Node?

    I wrote a VI to reload all the module prototypes
    of the steps in a TestStand sequence (note: all code modules are
    LabView VI's).  Whenever it gets to the LabViewModule.LoadPrototype
    call, I get a "server execution failed" error (error code -2146959355).
    I've tried solutions 1-3 in the following document to no avail:
    Why Do I Get Error -2146959355 When Using ActiveX or the Report Generation Toolkit?
    http://digital.ni.com/public.nsf/allkb/1c025f018cb5761686256c56007dd258
    Any ideas as to what else I can do?
    (Incidentally,
    if anyone has a clue as to what reference is causing a "References to
    PropertyObjects were not released properly" warning dialog... please do
    say).
    Thanks,
    Melissa
    (double-posted this to the TestStand forum in case different people read the 2 boards...)
    Attachments:
    ReloadAllPrototypes.vi ‏104 KB

    Hi Melissa,
    I think it would be a better option for you to perform this task in TestStand. See the attached example that is tested and works on reloading LabVIEW module prototypes.
    Hope this helps!
    Best Regards
    Jonathan N.
    National Instruments
    Attachments:
    getSequenceFilePath.vi ‏41 KB
    reloadLabVIEWPrototypes.seq ‏59 KB

  • LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred

    Hi,
    I am trying to build a LabView FPGA VI. During compilation, I always get error stating "LabVIEW FPGA:  An internal software error in the LabVIEW FPGA Module has occurred.  Please contact National Instruments technical support at ni.com/support".  At the time, comiplation process is almost at the end.  "Final Timing (place and route)" shows as completed. When Checked the Xilinx log session, at the end it states that "  Process "Generate Programming File" completed successfully". However, I do not see any generated bitfile.
    When clicked on error details, it shows following: 
    LabVIEW: An unknown error occurred.
    Error -2629 occurred at Error occurred while loading XML string. Invoke Node in niFpgaXml_PrettyPrint.vi->niFpgaWriteBitfileXml_Core.vi->niFpgaCompileWorker_CreateBitfile.vi->niFpgaCompileWorker_JobComplete.vi->niFpgaCompile_Worker.vi:6460001
    Possible reason(s):
    LabVIEW: An unknown error occurred.
    I tried multiple times but so far no luck to generate bitfile for this VI.  What could be wrong here?
    I am using Labview 2013

    Hi Mark,
    Here is the device utilization Summary. My development system is running with Windows-7 (32 bit) with 3GB RAM and Labview 2013. 
    Device Utilization
    Total Slices: 90.0% (11970 out of 13300)
    Slice Registers: 40.7% (43258 out of 106400)
    Slice LUTs: 71.6% (38103 out of 53200)
    DSP48s: 1.4% (3 out of 220)
    Block RAMs: 22.1% (31 out of 140)
    Timing
    40 MHz Onboard Clock
    : 40.00 MHz (57.90 MHz maximum)
    80MHz (Used by non-diagram components)
    : 80.00 MHz (100.19 MHz maximum)
    --WillsG

  • HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

    My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
    Unable to bootstrap transaction group 2517: inconsistent crosscheck
    No valid commit checkpoint found
    The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
    Problems were encountered during repair of the partition map
    Error: Storage system verify or repair failed.
    (the same with 2518, 2519 and 2520 transaction group)
    I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

    This is a user to user forum.  Apple isn't here and won't answer you.  You need to contact Apple directly.  You can use the Contact button at the bottom of the screen.

  • On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

    On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

    I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Error message does not lead to the custom tab me51n

    Hi Experts,
    When I try to to create a PR in me51n and check, a popup with error messges appear when we pick one of the entry and select edit button that leads to the field of that concerned tab.I have a custom tab and cutom field the issue is error message is displayed to fill the custom field but when I check mark that error and select edit that does not take me to the custom tab where custom field exists please suggest I have tried lot of user exits but no use.
    appreciate your help......

    We added some error message checking using Function exit EXIT_SAPLMEREQ_005. How we can bring the screen to Customer Data Tab when there are any errors under the tab. And as long as the error is not fixed, the screen will stay on the tab?
    To eloborate my question - in ME51n/Me52n, the system gives a messages window/subscreen with errors or warnings upon clicking the check button or upon save. On the messages window/subscreen, we can select a particular message and edit will take action to the corresponding tab with the cursor on the field with the issue. I understand this is standard functionality.
    However I'm looking for a way to make this work for a mandatory field on the customer data tab i.e., when I select the error message pertaining to this mandatory field and choose edit, control should jump to the customer data tab with the cursor on the mandatory field.

  • Error 1075: The dependency service does not exist or has been marked for deletion

    Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
    Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
    snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
    In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
    not exist or has been marked for deletion."
    Rebooting gets me nowhere.
    In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
    Any ideas, please?

    Hi,
    Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
    Kim Zhou
    TechNet Community Support

  • Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing.  Then another box indicates "Error 7 (Windows error 126).  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing".  Then another box indicates "Error 7 (Windows error 126)".  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

    When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
    The only options offered are "ignore" or "eject"
    Disk Utility sees the disc but does not give a repair option.
    What can I do?

    The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
    If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
    Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
    A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
    The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
    My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
    https://www.google.com/#q=raid+backup+mac
    Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
    Anyway, I am going on and on, yet not really saying anything.
    My ideas would not be all that interesting to follow as a backup
    plan when matching available newer hardware to task, but you
    can get some into better ideas if you are not in a rush. Get a
    good setup and then look into more an betterer stuff.
    Good luck & happy computing!

  • Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS

    Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS? 
    I get this when pushing an AP template to six new 3502i series access points.  The error reads like this:
    *** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
    **AP Parameters**
    Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
    MAC address has been changes to protect the names of the innocent...
    The rest of the template appears to push.  The 802.11a/n and 802.11b/g/n parameters show "success".
    Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
    Thanks in adavance!

    Hi,
    Two things :
    1- Can you refresh configs from WLC to WCS and then give it a try ?
    2- Is WCS using the right read-write community string for this WLC ?
       (Since we see a "No Access" message in the error)
    Thanks..Salil

  • I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So e

    I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So even though Lightroom CC is installed, it will not launch.  What do I need to do to allow it to launch?

    The problem was solved today.  Here's the full story.  I'm a Mac user.  At first I installed Lightroom CC on my iMac (desktop).  I had this problem so I called Adobe, and was referred to a "special unit" .  After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time.  Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it.  Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem."  I asked if I would have the same issue later when I installed it on my laptop (Macbook Air).  She said probably not.
    But I did.  The same internal error popup arose on launch and launch did not complete on my laptop.  I tried chat but no joy so I eventually called Apple Care.  I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name.  The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder.  The folder is actually there, but they hide it.  I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer.  Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder.  For some reason, the inability to create that folder in the launch process was preventing launch from being completed.  The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar.  Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name.  Once done, I shut down my laptop, and then rebooted.  I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one. 
    I am not a geek, so I hope this makes some sense.  I also hope Lightroom launches again tomorrow and beyond! 

  • JAVA_HOME does not point to the JDK Error.

    Hello Friends,
                         I unable build my local DC due problem with JAVA_HOME Parameter.
    I am using j2sdk1.4.2_08. Is this a problem. (JDK Version).
    I have checked the file C:\usr\sap\J2E\JC00\work\dev_server0
    I got the following error when try to build DC.
    Ant build finished with ERRORS
    Unable to find a javac compiler;
    com.sun.tools.javac.Main is not on the classpath.
    Perhaps JAVA_HOME does not point to the JDK
    Error: Build stopped due to an error: Unable to find a javac compiler;
    com.sun.tools.javac.Main is not on the classpath.
    Perhaps JAVA_HOME does not point to the JDK
    Build plugin finished at 2007-09-09 16:21:38 GMT+08:00 (SGT)
    Total build plugin runtime: 5.453 seconds
    Build finished with ERROR
    Cheers.. Sam

    Please find below is C:\usr\sap\J2E\JC00\work\dev_server0 content
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 5648
    system name : J2E
    system nr.  : 00
    started at  : Tue Sep 04 10:03:42 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 4672] Tue Sep 04 10:03:42 2007
    [Thr 4672] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 4672] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 4672] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 4672] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4467500  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4467550  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4467500            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4467550            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    [Thr 4672] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4672] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2992] WaitSyncSemThread: Thread 2992 started as semaphore monitor thread.
    [Thr 3280] JLaunchRequestFunc: Thread 3280 started as listener thread for np messages.
    [Thr 4672] Tue Sep 04 10:03:43 2007
    [Thr 4672] INFO: Invalid property value [JLaunchParameters/]
    [Thr 4672] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID4467550]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -verbose:gc -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global -Djava.awt.headless=true -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.engine.boot.Start
    -> parameters      :
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 4672] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4932] JLaunchIStartFunc: Thread 4932 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djava.security.policy=./java.policy
    -> arg[  3]: -Djava.security.egd=file:/dev/urandom
    -> arg[  4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  7]: -Djco.jarm=1
    -> arg[  8]: -Dsun.io.useCanonCaches=false
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 11]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global
    -> arg[ 12]: -Djava.awt.headless=true
    -> arg[ 13]: -XX:NewSize=85m
    -> arg[ 14]: -XX:MaxNewSize=85m
    -> arg[ 15]: -XX:MaxPermSize=192m
    -> arg[ 16]: -XX:PermSize=192m
    -> arg[ 17]: -XX:+DisableExplicitGC
    -> arg[ 18]: -XX:+UseParNewGC
    -> arg[ 19]: -XX:+PrintGCDetails
    -> arg[ 20]: -XX:+PrintGCTimeStamps
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 24]: -verbose:gc
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> arg[ 29]: -Dmemory.manager=512M
    -> arg[ 30]: -Xmx512M
    -> arg[ 31]: -Xms512M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=5648
    -> arg[ 35]: -Djstartup.ownHardwareId=Z2123283434
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=yes
    -> arg[ 38]: -DSAPINFO=J2E_00_server
    -> arg[ 39]: -DSAPSTARTUP=1
    -> arg[ 40]: -DSAPSYSTEM=00
    -> arg[ 41]: -DSAPSYSTEMNAME=J2E
    -> arg[ 42]: -DSAPMYNAME=senthil_J2E_00
    -> arg[ 43]: -DSAPDBHOST=
    -> arg[ 44]: -Dj2ee.dbhost=senthil
    [Thr 4932] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 5412] Tue Sep 04 10:03:50 2007
    [Thr 5412] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 5412] JLaunchISetClusterId: set cluster id 4467550
    [Thr 5412] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 5412] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 5184] Tue Sep 04 10:04:23 2007
    [Thr 5184] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 5184] *** ERROR => JHVM_RegisterNatives: registration for class com.sap.security.core.server.vsi.service.jni.VirusScanInterface failed. [jhvmxx.c     338]
    [Thr 5412] Tue Sep 04 10:04:49 2007
    [Thr 5412] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 3120] Tue Sep 04 10:04:50 2007
    [Thr 3120] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 336] Tue Sep 04 10:09:06 2007
    [Thr 336] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 2592] Tue Sep 04 12:34:36 2007
    [Thr 2592] JLaunchIExitJava: exit hook is called (rc=-337)
    [Thr 2592] JLaunchCloseProgram: good bye (exitcode=-337)
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 1432
    system name : J2E
    system nr.  : 00
    started at  : Tue Sep 04 12:34:40 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 5984] Tue Sep 04 12:34:40 2007
    [Thr 5984] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 5984] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 5984] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 5984] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4467500  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4467550  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4467500            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4467550            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    [Thr 5984] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5984] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 5096] JLaunchRequestFunc: Thread 5096 started as listener thread for np messages.
    [Thr 1600] WaitSyncSemThread: Thread 1600 started as semaphore monitor thread.
    [Thr 5984] Tue Sep 04 12:34:41 2007
    [Thr 5984] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5984] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID4467550]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -verbose:gc -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global -Djava.awt.headless=true -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.engine.boot.Start
    -> parameters      :
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 5984] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4812] JLaunchIStartFunc: Thread 4812 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djava.security.policy=./java.policy
    -> arg[  3]: -Djava.security.egd=file:/dev/urandom
    -> arg[  4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  7]: -Djco.jarm=1
    -> arg[  8]: -Dsun.io.useCanonCaches=false
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 11]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global
    -> arg[ 12]: -Djava.awt.headless=true
    -> arg[ 13]: -XX:NewSize=85m
    -> arg[ 14]: -XX:MaxNewSize=85m
    -> arg[ 15]: -XX:MaxPermSize=192m
    -> arg[ 16]: -XX:PermSize=192m
    -> arg[ 17]: -XX:+DisableExplicitGC
    -> arg[ 18]: -XX:+UseParNewGC
    -> arg[ 19]: -XX:+PrintGCDetails
    -> arg[ 20]: -XX:+PrintGCTimeStamps
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 24]: -verbose:gc
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> arg[ 29]: -Dmemory.manager=512M
    -> arg[ 30]: -Xmx512M
    -> arg[ 31]: -Xms512M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=1432
    -> arg[ 35]: -Djstartup.ownHardwareId=Z2123283434
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=yes
    -> arg[ 38]: -DSAPINFO=J2E_00_server
    -> arg[ 39]: -DSAPSTARTUP=1
    -> arg[ 40]: -DSAPSYSTEM=00
    -> arg[ 41]: -DSAPSYSTEMNAME=J2E
    -> arg[ 42]: -DSAPMYNAME=senthil_J2E_00
    -> arg[ 43]: -DSAPDBHOST=
    -> arg[ 44]: -Dj2ee.dbhost=senthil
    [Thr 4812] Tue Sep 04 12:34:42 2007
    [Thr 4812] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 4216] Tue Sep 04 12:35:05 2007
    [Thr 4216] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 4216] JLaunchISetClusterId: set cluster id 4467550
    [Thr 4216] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 4216] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 5892] Tue Sep 04 12:35:49 2007
    [Thr 5892] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 5892] *** ERROR => JHVM_RegisterNatives: registration for class com.sap.security.core.server.vsi.service.jni.VirusScanInterface failed. [jhvmxx.c     338]
    [Thr 4216] Tue Sep 04 12:36:14 2007
    [Thr 4216] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 516] Tue Sep 04 12:36:16 2007
    [Thr 516] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 332] Tue Sep 04 12:41:00 2007
    [Thr 332] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 5096] Tue Sep 04 20:53:33 2007
    [Thr 5096] JLaunchRequestFunc: receive command:17, argument:0 from pid:1152
    [Thr 5096] JLaunchIShutdownInvoke: set shutdown interval (stop:1188910413/end:1188910533/TO:120)
    [Thr 5096] JLaunchProcessCommand: Invoke VM Shutdown
    [Thr 5096] JHVM_FrameworkShutdownDirect: invoke direct shutdown
    [Thr 4196] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
    [Thr 4196] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
    [Thr 4196] Tue Sep 04 20:53:58 2007
    [Thr 4196] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
    [Thr 4988] Tue Sep 04 20:53:59 2007
    [Thr 4988] JLaunchIExitJava: exit hook is called (rc=0)
    [Thr 4988] JLaunchCloseProgram: good bye (exitcode=0)
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 272
    system name : J2E
    system nr.  : 00
    started at  : Tue Sep 04 20:54:04 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 4792] Tue Sep 04 20:54:04 2007
    [Thr 4792] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 4792] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 4792] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 4792] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4467500  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4467550  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4467500            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4467550            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    [Thr 4792] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4792] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1072] JLaunchRequestFunc: Thread 1072 started as listener thread for np messages.
    [Thr 3240] WaitSyncSemThread: Thread 3240 started as semaphore monitor thread.
    [Thr 4792] Tue Sep 04 20:54:05 2007
    [Thr 4792] INFO: Invalid property value [JLaunchParameters/]
    [Thr 4792] JStartupIReadSection: debug mode is specified by program arguments
    [Thr 4792] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID4467550]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -verbose:gc -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global -Djava.awt.headless=true -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.engine.boot.Start
    -> parameters      :
    -> debuggable      : yes
    -> debug mode      : yes
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 4792] JLaunchISetDebugMode: set debug mode [yes]
    [Thr 2100] JLaunchIStartFunc: Thread 2100 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djava.security.policy=./java.policy
    -> arg[  3]: -Djava.security.egd=file:/dev/urandom
    -> arg[  4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  7]: -Djco.jarm=1
    -> arg[  8]: -Dsun.io.useCanonCaches=false
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 11]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global
    -> arg[ 12]: -Djava.awt.headless=true
    -> arg[ 13]: -XX:NewSize=85m
    -> arg[ 14]: -XX:MaxNewSize=85m
    -> arg[ 15]: -XX:MaxPermSize=192m
    -> arg[ 16]: -XX:PermSize=192m
    -> arg[ 17]: -XX:+DisableExplicitGC
    -> arg[ 18]: -XX:+UseParNewGC
    -> arg[ 19]: -XX:+PrintGCDetails
    -> arg[ 20]: -XX:+PrintGCTimeStamps
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 24]: -verbose:gc
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> arg[ 29]: -Xdebug
    -> arg[ 30]: -Xnoagent
    -> arg[ 31]: -Djava.compiler=NONE
    -> arg[ 32]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
    -> arg[ 33]: -Dmemory.manager=512M
    -> arg[ 34]: -Xmx512M
    -> arg[ 35]: -Xms512M
    -> arg[ 36]: -DLoadBalanceRestricted=no
    -> arg[ 37]: -Djstartup.mode=JCONTROL
    -> arg[ 38]: -Djstartup.ownProcessId=272
    -> arg[ 39]: -Djstartup.ownHardwareId=Z2123283434
    -> arg[ 40]: -Djstartup.whoami=server
    -> arg[ 41]: -Djstartup.debuggable=yes
    -> arg[ 42]: -DSAPINFO=J2E_00_server
    -> arg[ 43]: -DSAPSTARTUP=1
    -> arg[ 44]: -DSAPSYSTEM=00
    -> arg[ 45]: -DSAPSYSTEMNAME=J2E
    -> arg[ 46]: -DSAPMYNAME=senthil_J2E_00
    -> arg[ 47]: -DSAPDBHOST=
    -> arg[ 48]: -Dj2ee.dbhost=senthil
    [Thr 2100] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 2588] Tue Sep 04 20:54:11 2007
    [Thr 2588] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2588] JLaunchISetClusterId: set cluster id 4467550
    [Thr 2588] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2588] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3600] Tue Sep 04 20:54:52 2007
    [Thr 3600] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 3600] *** ERROR => JHVM_RegisterNatives: registration for class com.sap.security.core.server.vsi.service.jni.VirusScanInterface failed. [jhvmxx.c     338]
    [Thr 2588] Tue Sep 04 20:55:21 2007
    [Thr 2588] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 4848] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 5320] Tue Sep 04 21:01:07 2007
    [Thr 5320] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 5276
    system name : J2E
    system nr.  : 00
    started at  : Tue Sep 04 22:04:45 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 1532] Tue Sep 04 22:04:45 2007
    [Thr 1532] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 1532] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 1532] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 1532] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4467500  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4467550  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4467500            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4467550            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    [Thr 1532] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 1532] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1636] JLaunchRequestFunc: Thread 1636 started as listener thread for np messages.
    [Thr 644] WaitSyncSemThread: Thread 644 started as semaphore monitor thread.
    [Thr 1532] Tue Sep 04 22:04:46 2007
    [Thr 1532] INFO: Invalid property value [JLaunchParameters/]
    [Thr 1532] JStartupIReadSection: debug mode is specified by program arguments
    [Thr 1532] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID4467550]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -verbose:gc -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global -Djava.awt.headless=true -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.engine.boot.Start
    -> parameters      :
    -> debuggable      : yes
    -> debug mode      : yes
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 1532] JLaunchISetDebugMode: set debug mode [yes]
    [Thr 5300] JLaunchIStartFunc: Thread 5300 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djava.security.policy=./java.policy
    -> arg[  3]: -Djava.security.egd=file:/dev/urandom
    -> arg[  4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  7]: -Djco.jarm=1
    -> arg[  8]: -Dsun.io.useCanonCaches=false
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 11]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global
    -> arg[ 12]: -Djava.awt.headless=true
    -> arg[ 13]: -XX:NewSize=85m
    -> arg[ 14]: -XX:MaxNewSize=85m
    -> arg[ 15]: -XX:MaxPermSize=192m
    -> arg[ 16]: -XX:PermSize=192m
    -> arg[ 17]: -XX:+DisableExplicitGC
    -> arg[ 18]: -XX:+UseParNewGC
    -> arg[ 19]: -XX:+PrintGCDetails
    -> arg[ 20]: -XX:+PrintGCTimeStamps
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 24]: -verbose:gc
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> arg[ 29]: -Xdebug
    -> arg[ 30]: -Xnoagent
    -> arg[ 31]: -Djava.compiler=NONE
    -> arg[ 32]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
    -> arg[ 33]: -Dmemory.manager=512M
    -> arg[ 34]: -Xmx512M
    -> arg[ 35]: -Xms512M
    -> arg[ 36]: -DLoadBalanceRestricted=no
    -> arg[ 37]: -Djstartup.mode=JCONTROL
    -> arg[ 38]: -Djstartup.ownProcessId=5276
    -> arg[ 39]: -Djstartup.ownHardwareId=Z2123283434
    -> arg[ 40]: -Djstartup.whoami=server
    -> arg[ 41]: -Djstartup.debuggable=yes
    -> arg[ 42]: -DSAPINFO=J2E_00_server
    -> arg[ 43]: -DSAPSTARTUP=1
    -> arg[ 44]: -DSAPSYSTEM=00
    -> arg[ 45]: -DSAPSYSTEMNAME=J2E
    -> arg[ 46]: -DSAPMYNAME=senthil_J2E_00
    -> arg[ 47]: -DSAPDBHOST=
    -> arg[ 48]: -Dj2ee.dbhost=senthil
    [Thr 5300] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 2320] Tue Sep 04 22:04:55 2007
    [Thr 2320] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2320] JLaunchISetClusterId: set cluster id 4467550
    [Thr 2320] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2320] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4712] Tue Sep 04 22:05:41 2007
    [Thr 4712] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 4712] *** ERROR => JHVM_RegisterNatives: registration for class com.sap.security.core.server.vsi.service.jni.VirusScanInterface failed. [jhvmxx.c     338]
    [Thr 2320] Tue Sep 04 22:06:47 2007
    [Thr 2320] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 6132] Tue Sep 04 22:06:48 2007
    [Thr 6132] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 2128] Tue Sep 04 22:13:14 2007
    [Thr 2128] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 5860] Wed Sep 05 21:49:01 2007
    [Thr 5860] JLaunchIExitJava: exit hook is called (rc=-335)
    [Thr 5860] JLaunchCloseProgram: good bye (exitcode=-335)
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 5224
    system name : J2E
    system nr.  : 00
    started at  : Wed Sep 05 21:49:06 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 5568] Wed Sep 05 21:49:06 2007
    [Thr 5568] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 5568] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 5568] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 5568] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID4467500  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID4467550  : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID4467500            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] ID4467550            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    [Thr 5568] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5568] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1716] JLaunchRequestFunc: Thread 1716 started as listener thread for np messages.
    [Thr 1928] WaitSyncSemThread: Thread 1928 started as semaphore monitor thread.
    [Thr 5568] INFO: Invalid property value [JLaunchParameters/]
    [Thr 5568] JStartupIReadSection: debug mode is specified by program arguments
    [Thr 5568] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_08
    JStartupIReadSection: read node properties [ID4467550]
    -> node name       : server0
    -> node type       : server
    -> java path       : C:\j2sdk1.4.2_08
    -> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -verbose:gc -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar -Dsys.global.dir=C:/usr/sap/J2E/SYS/global -Djava.awt.headless=true -XX:NewSize=85m -XX:MaxNewSize=85m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:UseParNewGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
    -> java vm version : 1.4.2_08-b03
    -> java vm vendor  : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type    : server
    -> java vm cpu     : x86
    -> heap size       : 512M
    -> init heap size  : 512M
    -> root path       : C:\usr\sap\J2E\JC00\j2ee\cluster\server0
    -> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> main class      : com.sap.engine.boot.Start
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
    -> shutdown class  : com.sap.engine.boot.Start
    -> parameters      :
    -> debuggable      : yes
    -> debug mode      : yes
    -> debug port      : 50021
    -> shutdown timeout: 120000
    [Thr 5568] JLaunchISetDebugMode: set debug mode [yes]
    [Thr 2500] JLaunchIStartFunc: Thread 2500 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: -Djava.security.policy=./java.policy
    -> arg[  3]: -Djava.security.egd=file:/dev/urandom
    -> arg[  4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  7]: -Djco.jarm=1
    -> arg[  8]: -Dsun.io.useCanonCaches=false
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Drdbms.driverLocation=c:/sapdb/programs/runtime/jar/sapdbc.jar
    -> arg[ 11]: -Dsys.global.dir=C:/usr/sap/J2E/SYS/global
    -> arg[ 12]: -Djava.awt.headless=true
    -> arg[ 13]: -XX:NewSize=85m
    -> arg[ 14]: -XX:MaxNewSize=85m
    -> arg[ 15]: -XX:MaxPermSize=192m
    -> arg[ 16]: -XX:PermSize=192m
    -> arg[ 17]: -XX:+DisableExplicitGC
    -> arg[ 18]: -XX:+UseParNewGC
    -> arg[ 19]: -XX:+PrintGCDetails
    -> arg[ 20]: -XX:+PrintGCTimeStamps
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 24]: -verbose:gc
    -> arg[ 25]: -Dsys.global.dir=C:\usr\sap\J2E\SYS\global
    -> arg[ 26]: -Dapplication.home=C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> arg[ 27]: -Djava.class.path=C:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;c:\sapdb\programs\bin;c:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE\;C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
    -> arg[ 29]: -Xdebug
    -> arg[ 30]: -Xnoagent
    -> arg[ 31]: -Djava.compiler=NONE
    -> arg[ 32]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
    -> arg[ 33]: -Dmemory.manager=512M
    -> arg[ 34]: -Xmx512M
    -> arg[ 35]: -Xms512M
    -> arg[ 36]: -DLoadBalanceRestricted=no
    -> arg[ 37]: -Djstartup.mode=JCONTROL
    -> arg[ 38]: -Djstartup.ownProcessId=5224
    -> arg[ 39]: -Djstartup.ownHardwareId=Z2123283434
    -> arg[ 40]: -Djstartup.whoami=server
    -> arg[ 41]: -Djstartup.debuggable=yes
    -> arg[ 42]: -DSAPINFO=J2E_00_server
    -> arg[ 43]: -DSAPSTARTUP=1
    -> arg[ 44]: -DSAPSYSTEM=00
    -> arg[ 45]: -DSAPSYSTEMNAME=J2E
    -> arg[ 46]: -DSAPMYNAME=senthil_J2E_00
    -> arg[ 47]: -DSAPDBHOST=
    -> arg[ 48]: -Dj2ee.dbhost=senthil
    [Thr 2500] Wed Sep 05 21:49:07 2007
    [Thr 2500] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 1148] Wed Sep 05 21:49:15 2007
    [Thr 1148] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 1148] JLaunchISetClusterId: set cluster id 4467550
    [Thr 1148] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 1148] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6136] Wed Sep 05 21:50:06 2007
    [Thr 6136] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 6136] *** ERROR => JHVM_RegisterNatives: registration for class com.sap.security.core.server.vsi.service.jni.VirusScanInterface failed. [jhvmxx.c     338]
    [Thr 1148] Wed Sep 05 21:50:33 2007
    [Thr 1148] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 3344] Wed Sep 05 21:50:34 2007
    [Thr 3344] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 2620] Wed Sep 05 21:56:35 2007
    [Thr 2620] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 5688] Thu Sep 06 10:29:06 2007
    [Thr 5688] JLaunchIExitJava: exit hook is called (rc=-337)
    [Thr 5688] JLaunchCloseProgram: good bye (exitcode=-337)
    trc file: "C:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
    node name   : ID4467550
    pid         : 3688
    system name : J2E
    system nr.  : 00
    started at  : Thu Sep 06 10:29:08 2007
    arguments   :
        arg[00] : C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
        arg[01] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
        arg[02] : -DSAPINFO=J2E_00_server
        arg[03] : pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_senthil
    [Thr 3348] Thu Sep 06 10:29:08 2007
    [Thr 3348] *** ERROR => Invalid property value [box.number/J2EJC00senthil] [jstartxx.c   789]
    [Thr 3348] *** ERROR => Invalid property value [en.host/PWDF3013] [jstartxx.c   789]
    [Thr 3348] *** ERROR => Invalid property value [en.port/3201] [jstartxx.c   789]
    [Thr 3348] *** ERROR => Invalid property value [system.id/0] [jstartxx.c   789]
    JStartupReadInstanceProperties: read instance properties [C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
    -> ms host    : senthil
    -> ms port    : 3601
    -> OS libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : senthil
    -> ms port    : 3601
    -> os libs    : C:\usr\sap\J2E\JC00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : C:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
    -> [01] bootstrap_

Maybe you are looking for