Does Touch have "remove color cast" and adjust lighting - levels like Photoshop Elements?
Does Touch have "remove color cast" and adjust lighting -> levels like Photoshop Elements?
There isn't a "remove color cast" command per se but there are Levels and Curves adjustments so you can effectively remove/diminish colors yourself.
Similar Messages
-
I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
I see only photoshop elements 13
ThanksDownloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Removing color casts, and correcting colors to match reference materials? any guides/tutorial/videos
I have been looking for tutorials showing how to use SpeedGrade. I am now comfortable with the UI enough to use it after watching these: http://www.youtube.com/user/AdobeTV/videos?query=speedgrade
I am looking for tutorials that show how to do a couple things, first I would like to be able to remove any color casts. In photoshop to do this you can use a curves layer and use the set white point color picker and click somplace that is supposed to be white. and in premier you could do something similar using the Fast Color Corrector. So basically I am looking for a way to target an area in a frame that should be grays, In Anime, the eyes generally will always be shades of gray, so that is what I would target usually when working with anime in photoshop/premiere. If anyone knows of a tutorial that shows how to do this type of color cast removal color correction in SpeedGrade could you please share a link.
Some of the older 80's and 90's anime on film, the film has aged and that is where the color cast came from. There is also a loss of color information across the board. For instance in the below picture. The sky is supposed to be more blue instead of teal/sea green.
Another thing is back in the 80s and 90s a lot of Anime worked from limited color palletes; something like maybe 16 colors total, so a lot of colors are used repeatedly. So even with only a limited amount of reference material I should be able to get the corrections close. (I dont have reference clips for every single episode, only a handful of scenes from a handful of episodes.)
I have some reference material showing approximately what the colors should be. So my next question is if anyone knows of any tutorials/guides/videos showing how to use SpeedGrade to color correct a clip so that the colors match up with the colors used in a reference clip
I was also wondering about auto correction based on a reference clip, although I am guessing this is still not possible.
When I watched the websiminar: http://seminars.adobeconnect.com/_a227210/p738pxm9zs0/ at about 43 minutes into it, a feature is shown that automatically adjust the color using a clip that contains a colorchart.
I was wondering if a tool like that could analyse a clip start to finish, to create a pallete of used colors, and then compare that to the colors used in another clip and correct them. (a feature like this would probably be more useful/accurate in anime than it would liveaction but who knows.)
Another UI related question:
I did have one question, the only place I see to access the colorwheels is in the looks tab, my video I am working on, just manages to fit at 100% in the monitor.
So I would prefer to hide or collapse the different looks(maybe even with a hotkey) so that I can access the color tools that it is covering, I attached a picture of what I am talking about. I know pressing "P" hides everything at the bottom, and figured maybe there is already a way to hide/minimize/collapse the look presets to access the tools behind them without shrinking down the size of the monitor preview.There is a special grading filter called "Color match" which can assist in cross-referencing the black/white/gray levels from one playhead to another but it's not documented yet. The suggested way to set black/white/gray points in Sg is to adjust it visually, using the waveforms as a guide, but there's no chance of doing that for something as small as a character's eye. There's no "eyedropper" picker on the primary grading panel because Sg isn't a correcting tool, but a cinematic grading tool. 99% of the time the end result of an Sg grading session is a long way from what the camera pixels actually recorded.
If all you are doing is reversing a color cast then Speedgrade isn't the right tool to use - you should be working in Premiere Pro (with the Fast or 3-Way Color Correctors). If you're a Photoshop person the UI is much more recognizable, it'll handle all the native footage you can throw at it, and you get your B-G-W eyedroppers.
In Speedgrade CS6 you cannot hide the Presets panel in the Look or Mask tab. The UI is really designed for use in a two-monitor system (which all professional colorists will have), and/or with a hardware controller (which means you can keep the entire bottom panel hidden). -
My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?
Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden -
Why does my iPod Touch have a white screen and how do I get rid of it?
Why does my iPod Touch have a white screen and how do I get rid of it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Does an ipod touch have an ebook app and other education apps just like a n ipad?
does an ipod touch have an ebook app and other education apps just like an ipad?
The iPod (2G and later) is compatible with iBooks and ther are other apps too.
-
Obtained elements 3 bundled with epson v700 .Remove color cast,color variations,adjust smart fix are disabled.Am i able to enable these??
or were they permanantly removed.Happy with pse 3,does what i want so no real reason to upgrade at present,only want to use color cast option,maybe
the other 2 at a latter date.
thanksThanks to Joe & Juergen. Juergen your tip did not help in this case,however Joe yours did,and i am now able to access the bottons that were inaccesible. But in doing so,it has not helped my overall problem,which is the overall strong redish cast,especially in some of my Gevaert & kodachrome slides.Maybe i'll have to trial pse 7 and see
if it will help.Or just keep on reprinting my b&w negs!!Prehaps there
is someone who can point me in the direction of a freebie download/
plugin that could help.
Many thanks for the assistance.-- john. -
Removing Color Cast with TIFF images? (PSE 8)
Hello,
Hoping someone can help. I'm trying to "remove color cast" with TIFF images and I'm not seeing the option as available. It works fine when I try to use it with JPEG images.
To be clear....I'm using PSE 8...after opening a picture (of course), on the top menu "Enhance", then "Adjust Color". When I'm working with a TIFF image the option "Remove Color Cast" is not available/active. It works fine with JPEG images.
What am I missing?
Thanks,
RichAlternatively if you want to keep the file at 16 bit click File >>Open As >>Camera Raw
Then use the temperature and tint sliders to edit your tiff.
-
My iPod 4th gen has been broken for at least 2 years, the screen is broken so it won't sense me touching it but it still turns on, I have heaps of photos and vidios I would like to look at but my laptop that it was synced to is broke, I also have a pass code on my ipod. Is there anything I can do!
Photos
- If they are in an iPod backup then restore another iPod, iPhne or iPad from that backup. See the restore topic of:
iOS: How to back up
- Maybe from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore the iPod:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
You can also contact a Data Recovery Company -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Authorised.i have removed itunes program and reloaded with lastest release still no joy
when i try to down load my content from the cloud i get a error message not authorised on this pc.I have removed the itunes and reloaded with the latest release still no joy.Also have checked on my account where it states my pc is authorised. Any suggestions Thanks
Sorry about the delay, pack. Brooding over what to try next.
I'd like to doublecheck the malware possibilities with another malware scanner.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look. -
AirPort does not have an IP address and cannot connect to the Internet.
Wi Fi problems
I have recently changed from a old netgear router to using a vigor 120 modem with airport extreme
Internet connection is established but my airport express reports "AirPort does not have an IP address and cannot connect to the Internet." although status is ON and the correct wifi address appears.
My iPhone also identifies the correct network but cannot connect
Any suggestions?I don't have any phones, so not aware of the options, but on a Mac to fix this problem it'd likely be...
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.
https://discussions.apple.com/message/17028445#17028445
Or...
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot -
my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?
It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
Does clearing cache remove saved passwords and login?
Does clearing cache remove saved passwords and login?
Apparently my FF is slow as a bastard child because of my cache. However, I have loads of user/passwords saved and DO NOT wish to seem them go buh-bye.
What says you?See:
* [[Backing up your information]]
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
* http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords
* Password Exporter: https://addons.mozilla.org/firefox/addon/2848
Keeping a large History or a problem with an extension is a more likely cause for a slow response then a problem with the cache.
See [[Troubleshooting extensions and themes]] -
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.
Maybe you are looking for
-
Table of Actual cost of production
Hi Experts, I m developing one Z report for our client which shud contain Standard cost & Actual cost of production of the sold material for that particular month. I am following KKBC_PKO tcode for the same. Standard cost & Actual cost has a part of
-
I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?
-
Binding Parameters of EXTSRV-PROCESS
Hi, We are using adobe forms for PCR approval using the Business object method EXTSRV-PROCESS. This business object when entered in the task requires the follwing parameters as binding elements, <b>Import parameters</b> MODE REQUEST_NO DESCRIPTION IF
-
How to update my iphone when it says im not connected to the internet when i am?
I know how to update my iphone but it says that im not connected to the internet, when i actually am?! Does anybody know how to solve this problem?
-
Pin for Sun Software PKCS#11 softtoken
Hello, I am studying the Solaris Security Essential SUN's book for university examination and I have a problem with pktool command in chapter 8. For example when I try to run the follows command: $pktool list keystore=pkcs11 objtype=both the command