Domain Certificate generation - SSLGenCA.sh hangs during adding a secret

Hi,
I have got some strange issue with the Certificate generation for the Domain (Middleware 11.1.1.5, Weblogic 10.3.5, Linux 64):
Fresh install of
1. DB + rcu schemas
2. Weblogic + Domain
3. OID
Instance oid_inst1 is up and running, ldap is listening at ports 3060/3061
Issue:
====
Command SSLGenCA.sh hangs at the last step (${ORACLE_HOME}/bin/mkstore -wrl $CA_CRED/castore -createEntry capassword $wpasswd >> $LogFile 2>&1):
Generate a new CA Wallet...
Create SSL Domains Container for cn=IDMDomain,cn=sslDomains...
Storing the newly generated CA to the LDAP...
Set up ACL to protect the CA wallet... <===== HERE IT HANGS
All logfiles are empty.
Thanks for support
DanielF

Had the same issue (sound stutter / garble) after upgrade to 3.0.6.
Fixed it by downgrading back to 3.0.4.
In case it helps identify the issue, these are the sound modules I am using (they work fine under 3.0.4, but produce stuttering audio under 3.0.6, under ALL apps I use - firefox/flash videos, mplayer, ffplay, etc):
$ lsmod | grep snd
snd_hda_codec_realtek 222124 1
snd_hda_intel 19101 3
snd_hda_codec 66954 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4942 1 snd_hda_codec
snd_pcm_oss 33792 0
snd_pcm 60015 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 15374 2 snd_pcm
snd_page_alloc 5837 2 snd_hda_intel,snd_pcm
snd_mixer_oss 12807 1 snd_pcm_oss
snd 43561 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 4986 1 snd

Similar Messages

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast. Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

Weblogic 11g hangs after adding -Xmanagement start parameter

Hi.
I've got very strange problem with Weblogic 11g.
After adding to startup parameter:
-Xmanagement:port=3107,authenticate=false,ssl=false
server hangs during start.
<May 2, 2012 2:45:19 PM> <INFO> <NodeManager> <Server output log file is '/u01/app/Oracle/Middleware/user_projects/domains/jmsZycie/servers/srv1/logs/srv1.out
'>
JAVA Memory arguments: -Xms512m -Xmx512m
WLS Start Mode=Production
CLASSPATH=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R
28.2.2-4.1.0/lib/tools.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.ja
r:/u01/app/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/ap
p/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/a
pp/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/u01/app/Oracle/Middleware/pa
tch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/lib/tools.jar:/u01/app/Ora
cle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/app/Oracle/Middleware/modules/fe
atures/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/app/Oracle/Middleware/modules/org.apache.
ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/Oracle/Middleware
PATH=/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6
.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin:/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Orac
le/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.
0_29-R28.2.2-4.1.0/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
Starting WLS with line:
/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jrockit -Xms512m -Xmx512m -Dweblogic.Name=srv1 -Djava.security.policy=/u01/app/Oracle
/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.system.BootIdentityFile=/u01/app/Oracle/Middleware/user
_projects/domains/jmsZycie/servers/srv1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVeri
fication=false -Dweblogic.ReverseDNSAllowed=false -Xms2048m -Xmx2048m -Xnohup -Xverbose:gcpause,gcreport,memory -Xverify=none -Xmanagement:port=3107,authentic
ate=false,ssl=false -Xss:512k -Xdebug -da -Dplatform.home=/u01/app/Oracle/Middleware/wlserver_10.3 -Dwls.home=/u01/app/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/u01/app/Oracle/Middleware/wlserver_10.3/server -Dweblogic.management.discover=false -Dweblogic.management.server=http://10.2.124.194:7080
-Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default
/sysext_manifest_classpath weblogic.Server
[INFO ][memory ] Running with 32 bit heap and compressed references.
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, strategy: Generational Parallel Mark & Sweep.
[INFO ][memory ] Heap size: 2097152KB, maximal heap size: 2097152KB, nursery size: 1048576KB.
[INFO ][memory ] <start>-<end>: <type> <before>KB-><after>KB (<heap>KB), <time> ms, sum of pauses <pause> ms.
[INFO ][memory ] <start> - start time of collection (seconds since jvm start).
[INFO ][memory ] <type> - OC (old collection) or YC (young collection).
[INFO ][memory ] <end> - end time of collection (seconds since jvm start).
[INFO ][memory ] <before> - memory used by objects before collection (KB).
[INFO ][memory ] <after> - memory used by objects after collection (KB).
[INFO ][memory ] <heap> - size of heap after collection (KB).
[INFO ][memory ] <time> - total time of collection (milliseconds).
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds).
[INFO ][memory ] Run with -Xverbose:gcpause to see individual phases.
[INFO ][mgmnt ] Remote JMX connector started at address poc1:3107
[INFO ][mgmnt ] Local JMX connector started
<May 2, 2012 2:45:22 PM CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable th
is check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 2, 2012 2:45:23 PM CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disab
le this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 2, 2012 2:45:24 PM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.2-7-148152-1.6.0_29-20111221
-2104-linux-x86_64 from Oracle Corporation>
<May 2, 2012 2:45:26 PM CEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<May 2, 2012 2:45:29 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 2, 2012 2:45:29 PM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
And this is it.
I am able to connetct from JRMC. After removing -Xmanagement all is working.

Can you please take a thread dump and copy paste the stack trace for the Thread called "main" thread.
Please take atleast 3 thread dumps with an interval of 10 seconds and paste the "main" thread stack trace from all the 3 thread dumps.
After analyzing the stack trace we might be able to determine where it is hanging and thus giving us a clue where the issue could be.
Arun

Flash Player 10.1.53.64 hangs during initialization

(Forking off from [previous issue created by me|Flash Player 10.1; that was since stickied and dedicated to a PowerPoint issue.)
SWFs generated on a machine where Flash Player 9.0.115.0 is installed, and viewed in any web browser on machines with FP 10.1.53.64, hang indefinitely during the initialization sequence.
As noted in the previous thread, SAP has submitted an issue to Adobe (that could be similar or related) here:
https://bugs.adobe.com/jira/browse/FP-4843
Noting that Adobe has addressed the above issue, does this fix extend to web browser plugin versions of the Flash Player as well?

Hi Matt,
i am also interested in the conditions in which the bug arises. I developed an complex application using Xcelsius 5.3.1.0 with
Flash 10.1.82.76 installed on the development machine on Windows XP SP 3. At a certain point of the development
it was not possible anymore to preview application in the development environment. After generating the SWF the
development environment crashed while initializing the application. But the generation of the SWF file was successfull and
also can be done without errors using the export function.
To solve the issue with the current adobe flash player i downloaded the adobe flash projector of the older version 10r42_34,
loaded the generated SWF without any problems (on the development machine) and used the function "create projector" to create
a stanalone application that includes the player.
The ".EXE" generated worked fine on the development maschine as well as on a couple of other machines. With the corresponding projector for Mac OS we also generated an application including the player for OS X wich also works fine on
some mac books.
On the other hand, the application hang in the initialization process on other windows machines without showing any rule
by hardware or software configuration (see also the Post from Francis86 in Thread "Hanging during utilization: Flash Player 10.1.53.64").
Two other aspects might be of interest for you:
1) In the context of the development i also experienced problems after a certain amount of components had been added, resulting
in a crash of the development environment. The only way to solve the problem was to delete components or replace them by others. It would be interesting to know where the limitations are.
2) The tab-component seems to produce additional problems. The first design of the application structures the application in different views utilizing a tab component with 5 tabs and a lot of components (as few as possible) on each tab. The problem arose if one uses the reset-button component. The reset did not work for every component within the different tabs. By random some of the initial values had been reseted to its original state, others had be set simply to 0 ignoring its initial state.
I could only solve this problem by replacing the tab component with a menu and using visibility rules. This results in solver responsibility when switching betweent the "tabs" but the reset works fine afterwords.

Jar File Generation session is hanging after allication migration

Hi
we migrated oracle11i(11.5.10.2) windows 2000 to windows 2003 server
after migration
Generation of jar file session is hanging
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @e:\oracle\prodappl\admin\PROD\out\genjars.cmd
what could be the reason
Thanks
With Regards
A-Z

Hi,
Refer MOS tech note:
*Adjava Hangs During Adpatch or Adadmin On Windows NT/2000 [ID 180199.1]*
If it doesn't helps, then i suggest you to log a S.R.
thanks,
X A H E E R
http://appsdbaworkshop.blogspot.com

Windows 7 hangs during install on HP Pavilion a Media Center 1320n

Windows XP Media is currently on machine. I tried to install Windows 7 Ultimate Edition. When the computer rebooted the installation would hang during the complete installation. I tried several times and the same thing happened. I reformated the hard drive and tried to install the same OS using a USB flash drive and got the same results. I reformatted again and tried to install Windows Vista Ultimate Edition and got the same results. The only OS I can install on this machine is Windows XP. Can anyone tell me what needs to be done to install Windows 7.
I upgraded the Bios with version 3.24 before I began the installation.

Another update in case anyone might be having the same problem.. Found out what the problem is.. But still have not resolved it.. I did another fresh install of Win7. Joined the domain and rebooted. When it came back up I checked the network and sharing center. It is showing "Identifying". Start> Run> firewall.cpl . It is showing Public network as my current connection. I unplugged my network cable and plugged it back in. It now shows domain network. Log offs work fine. After reboot it goes back to doing the same thing. I tried with both DHCP and a static IP. Both ways, same problem. So it works fine if the location is set to domain network but not to public (which i guess it automatically puts it in to if it cant identify the network). Sometimes it will go to work network. Logoffs take roughly 30 seconds compared to 8 min. on a public network or 2 seconds on a domain network.
We do have a group policy that disables security center. It will disable the firewall and other features when it is set to domain network. But not for the work or public locations.
The other policy we have in place is for Kerberos. Kerberos is disabled by default in windows 7 but is needed for our SAP to work. When we run a packet sniffer on the machine it is showing a lot of back and forth traffic with our DC and the protocol just shows Kerberos. So my next test is to remove the GPO for Kerberos and see if that makes a difference.
The funny thing is; I have a Precision 380 sitting right aside of it. Running Windows 7, joined to the same domain, connected to the same switch, in the same OU and it doesnt have a problem..

Report Server report process hangs during formatting reports

We are using Forms and Reports services stand alone.
I am printing 2000 reports every day, 5% reports hangs during formatting pages, or at any page number while formatting. Has anybody seen this problem and what was the fix. I am seriously thinking to change the report server and move to crystal reports.

I am able to run request using Reports service. So this problem may be a setup issue.
1) Ensure that in $OH\network\admin\tnsnames.ora you have the TNS entry fo the DB connection
mydb, mydb.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = fullHostName)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = service_name)
If you have multiple Oracle Homes in the same machine please see that you have added tns entry to correct oracle home
2) Set the logon user for the service . Please follow the steps given below.
* On the machine that hosts the Reports Server, choose
Start > Settings > Control Panel
and double-click Services in the Control Panel folder.
* In the Services dialog box, choose "OracleORACLE_HOME_NAMEReports[repserver]", where ORACLE_HOME_NAME is the home name of the Reports Server and repserver is the name of the Reports Server instance. The value of ORACLE_HOME_NAME you can see in registry .
HKLM->SOFTWARE\Oracle\Home<x> -->ORACLE_HOME_NAME
* Click Startup. The Services dialog window displays.
* In the Services dialog window, select "This Account" in the" Log On As" section, and select an operating system user name and password. This specifies the user account under which the server process is run. The user running the Reports Server service must have access to anything the server may need.
3) If these do not solve the issue, please turn ON reports tracing, restart service and post the exception/errors you see in log file here. Also please post the full request URL here.
To turn ON tracing in $OH\reports\conf\<serverName.conf> , uncomment the trace element.
The logs can be seen in $OH\reports\logs\server_name.trc and server_name-rwEng.trc
Workaround
4) Till the setup issue with windows service is identified, you can workaround the issue by starting server as a standalone executable. For that give ,
rwserver server=server_name
Thanks
The Oracle Reports Team

Multiple cPCI Graphics cards - System Hangs during Boot

We have 2 Kontron dual output CP332 cPCI graphics cards to install into a NI PXI rack in order to give us 4 graphics outputs.
When one card is installed it acts as the Primary graphics card and it is required to disable to NI on-board graphics card in order for this to boot and function correctley.
If a 2nd Kontron CP322 card is added the system will hang during WinXP boot, as it switches from VGA to SVGA mode.
Disabling the 2nd card via device manager allows the system to boot.
Re-enabling the 2nd card once booted, then configuring with the ATI driver application allows the 4 graphics output to work as expected.
If the system is re-powered it will once again hang during WinXp booting.
Is there anything that can be configured on the NI Embedded PC (BIOS) to prevent this ?
Is there anything in windows that can be set to prevent this ?
Can we control the windows device manager from labview in order to enable/disable the 2nd card after power-on and before shutdown.
many thanks

Hi Scott,
I have some more information for you regarding your issue. We have tested the Kontron CP332 with the PXI-8196.
However when we tested the setup, we had 3 monitors working, the on-board graphics and the dual output from the card.
Until we get the on-board graphics working with a single CP332 I don't think we will get bot CP332's working.
So these are the steps to get on-board graphics working with a single Kontron card the steps come from talking to our PXI Product Support Engineer:
"The first thing you need to make sure is that you are using the
driver for Windows XP, and not the one for Windows 2000. Here's a link
to the driver download page:
http://us.kontron.com/index.php?searchword=cp+332&id=363
Notice that the first two driver downloads look just the same, but if
you hover over them and look at the url, you'll notice that the first
one is for Windows 2000 (w2k), and the second one is for Windows XP
(wxp). So, just make sure you are using the second one. The PSE did
mention that she was initially using the Win 2k driver, and was having
some issues with it hanging and all. Here's the information she sent me
about how she was able to get things working:
"Here is the info. My controller has BIOS version 1.3 but have him try this first before updating the BIOS.
The Kontron Board is the CP 332. I was able to get all three monitors working with the PXI-8196.
Configuration steps:
1) Insert both the controller and the kontron board in the chassis.
Note: When the computer is starting it will give you the Windows boot
up screen on the DVI 1 on the Kontron board and then give you the login
screen on the monitor connected to the 8196 so make sure you still have
a monitor connected to the controller.
2) Cancel the NI installation wizard if it comes up.
3)
Unzip the drivers and run the setup.exe file. Make sure you install
both the ATI display driver and the ATI Control Panel. (Check the zip
name to make sure you have the xp version of the driver)
4) After
restart go to the Display Properties and under the Settings tab you
should have monitors 1 and 2 on Mobility Radeon 9000 (Kontron CP-332)."
If you don't have BIOS version 1.20 or higher, please upgrade to BIOS version 1.30, if you need to upgrade the BIOS please make sure you fully understand the readme file. Then follow the steps above to enable triple output on the graphics cards.
When you have this working please try adding the second Kontron card.
Regards
JamesC
NIUK and Ireland

IPod recognized, but hangs during update

So my iPod will show up in Finder and in iTunes, and automatic updating will begin. However, at random times during the update, sometimes 4 songs in, sometimes 65, the whole process will just hang. iTunes status screen gets stuck on flashing between "Updating iPod..." and Song 65 of 2054 and just flash between those two over and over.
Meanwhile, the iPod screen itself is also stuck and no longer flashing "Do Not Disconnect" -- it's a steady screen with none of the normal flashing.
Tried resetting, doesn't do anything.
Tried restoring, and it hangs after Authenticate asks me for my password to Restore the iPod.
I wind up having to just force disconnect and force quit everything and restart.
Anybody else have this problem? Thanks for any help you can give.
Oh btw, OS 10.3.9, iTunes 4.9, iBook G4.

I am having the same issue where it hangs during update -- seems to always happen around the 1800th song. Here's more specifics:
-I've got 7000 songs in my Library
-my iTunes Music folder is located on an external FireWire HD
My Mac has no problems mounting the iPod. No problems restoring with iPod Updater. No problems with erasing using Disk Utility.
I have tried the following:
1. Resetting and then restoring via iPod Updater.
2. Erasing/reformatting via Disk Utility, including zeroing out all data, and then restoring via iPod Updater.
3. Resetting into Disk Mode.
4. Manually updating songs.
5. Automatcially updating songs.
Nothing works. I have been troubleshooting this for about 8 hours now with no luck. No matter what I do differently, it always hangs around song 1800. I even tried uninstalling/reinstalling iTunes -- and I have tried this with several different user accounts and on different partitions I have set up.
When it "hangs," the iPod itself just makes a the "clicking" sound of a HD. I'm wondering if the HD is just bad -- but it came up with no errors when checking with Disk Utility.
Any more suggestions?
Johnny

Arch Live CD x64 hanging during boot at "triggering uevents"

Hello!
I recently was recommended Arch by a friend, and after I followed the 'Newbies Guide' and burning a live CD to install Arch with, it appears to hang during Live CD boot at "installing uevents."
I am trying to install Arch as a dual boot on a late 2008 MacBook Pro which is currently running x64 Windows 7. I have plenty of HD space (100gb free and 100gb unallocated to install Arch onto).
Here is a picture:
http://i.imgur.com/Y8P41nf.jpg
I get the same error weather I try to install x64 or i686 (I think that's what it's called). Is there any reason for this?
Thank you!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code --
(Sorry, missed that. My bad!)
Last edited by RalphORama (2013-09-07 03:09:13)

frank604 wrote:
You can try nomodeset. Seems to be a failure in loading a driver for your hardware. To read more on similar issues, there's a few posts with more info and suggestions by googling it.
Google result: http://lmgtfy.com/?q=halt+at+triggering+uevent
Results:
https://bbs.archlinux.org/viewtopic.php?id=151259
https://bbs.archlinux.org/viewtopic.php?id=140426
Thanks! I tried googling it myself but got mostly answers that didn't work. I'll try this!

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Solved!
Go to Solution.

Problem Solved ,Thank you very much !!
For those who might face the problem and stumble upon this thread after googling
Read above mentioned comments
Now here's what I did :
Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter
So now my phone is back to normal , and , it got the latest lolipop update !
Problem solved i guess but Thommo , i need to disturb you again with just one more question , since at the very beginning , the update process was interrupted , and now i got lolipop after the repair ,without needing to update again , so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ?
again , Thank you ...

X200 hangs during restart or shut down when connected to ultrabase

My X200 hangs during a Windows restart or shut down when I'm connected to my ultrabase. The laptop appears to go through most of the processes to restart/shut down but eventually hangs at a blue screen with unmoveable cursor (note, not a Windows BSOD). I'm forced to perform a hard shut down to turn off the laptop.
This hang at restart/shut down only occurs when I'm connected to the ultrabase.

Just as a thing to try, and this is assuming that you all have an integrated camera, please try this camera driver and let the board know the results:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600

Acrobat 9 hangs when adding a text box

It seems that any installation of Acrobat 9 I have come across, Acrobat hangs when adding a text box from "Forms>Add or Edit Fields".
I may need to apply an update or two but this problem seems very consistent and reproducable.
I plan on trying Acrobat 9 Pro on Windows XP to see if it makes any difference, but does anyone have any ideas? OTHER than upgrading to Acrobat X?

Textbox takes few extra seconds to establish himself, but it never hangs for me. Did you tried to click-n-drag to create Textbox?

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Domain Certificate generation - SSLGenCA.sh hangs during adding a secret

Similar Messages

Maybe you are looking for