Domain Fixed values.................

Hi,
can any body tell me what are the advantages and dis-advantages of giving FIXED VALUES to DOMAIN.
Thanks.
can any body help in this..........
Message was edited by: Deepak333 k

> Hi,
> Thanks for the reply.
> Do you have any Documents on this.
> Thanks.
Hi,
No documentation is needed for that!
As andreas and I said, when you need to add a value if you use fixed value, you will have to open the workbench request and add the value in the domain -> aLMOST for dev only!
If you use a value table you can use standard table maintenant transaction SM30 for end users

Similar Messages

Hide domain fixed values for future use

We have a custom domain with 7 fixed values.These Fix values will display if we click on f4 help in the screen.I dont want 4th value and 5th value in the f4 search help button.whether it is possible to hide those values for future use. if we delete the fix values from the domain fixed value list..then it is effecting the past data.Please help me on this.

Hi Prashanth,
Use FM : DDIF_DOMA_GET to get the fixed values for that domain in an internal table, then you can process that internal table according to your requirement and display only those values, in AT SELECTION_SCREEN ON VALUE_REQUEST event in the report.
I hope it resolves your problem.
Thanks,
Avinash

Checking domain fixed values

I have a screen field in a dynpro where the domain has a fixed value range. The values shows up in the F4 help, but I can't figure out the best way to validate it in the PAI short of hardcoding, which I'd like to avoid.
Take for example a domain with possible values 'A', 'B', 'C', '1', '2' or '3'. These values pull through to the search help but I also need to validate manual user input against this list.
I understand the DDIC attribute for a screen element can do this, but that's not an option in this case as the name of the field does not match the name of a dictionary field. Any other suggestions?
Thanks

>
Chris wrote:
> I have a screen field in a dynpro where the domain has a fixed value range. The values shows up in the F4 help, but I can't figure out the best way to validate it in the PAI short of hardcoding, which I'd like to avoid.
>
> Take for example a domain with possible values 'A', 'B', 'C', '1', '2' or '3'. These values pull through to the search help but I also need to validate manual user input against this list.
>
> I understand the DDIC attribute for a screen element can do this, but that's not an option in this case as the name of the field does not match the name of a dictionary field. Any other suggestions?
>
> Thanks
If this field should only contain values from the domain fixed value range, why don't you make it into a drop down listbox field? This would make manual input impossible and all they can do is select values from the drop down list.

Is there any RFC function module to read domain fixed value

Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.

HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi

Function Module to validate a value against domain fixed values

Hi,
Could anybody please let me know if there is a standard Function Module that takes a Value and Domain name as an input and checks if the input value exists in the Fixed Values of the domain.
Thanks,
Shalabh

Hi,
you can use fm FM_DOMAINVALUE_CHECK. Pass parameter values for I_DOMNAME and I_DOMVALUE.
If the value is invalid, exception VALUE_NOT_ALLOWED will occur.
Regards,
Klaus

Domain fixed values columns

Hello all,
a liitle bit strange while maintaining fixed values to the domains in 2 diff SAP systems.
in one SAP system, i am getting 3 columns for maintaining fixed values namely:
I (Initial value)
Fix.Val.
Short Descrip.
but in another SAP system, i am NOT getting the column I (Initial value).
Should i need to do some settings, in order to get coumn I (Initial value).
<removed by moderator>
Regards,
Venkat
Edited by: Thomas Zloch on Mar 5, 2012

Hi Venkata,
For value range in the domain - when the 'Configuration' icon that is table settings icon in the top right corner is opened and
'Current settings' and 'Standard settings' are maintained as 'Basic setting' and 'Use as standard setting' check box is selected and saved then all the columns in that table(I , Fix Val , Short Description , Fixed Value Append , Switch ) are displayed.
Please check it for your domain.
Regards,
Sai

EEWB - Display Domain Fixed values

Hi Guys,
We have a field added to CRMD_ORDER using EEWB. A data element with a domain having fixed values was used while creating this field. This custom field is displayed with no issues. But now the user wants the fixed value to be displayed next to the selected value. Anyone have any idea how this can be achieved? We are thinking of a adding an output only field on the screen and then filling the value to it. But this need some custom coding to be done. Not sure if we can do this custom coding anywhere in the generated code of EEWB.
Please let me know if anyone has any suggestions.
thanks and regds,
M...

Hi,
For the EEWB fields for the CRMD_ORDER.....you need to implement BADI's for filling up the values....and also to meet your requirement.
you need to tell the in which set you created the field like customer_h, customer_i......or whatever. according to that there are BADI's to fill up the values and display them.
Hope it helps.
Regards
Sidd

Translations for Domain Fixed Values

Hi,
I am trying to do the translations for fixed values at Domain level. However the problem is, after completing the translations, it is not asking for any Transport Request. I am not sure how can I transport them to another system.
Could you please let me know, how can I solve my issue?
Thanks,
Sandeep

Hi,
Use RS_LXE_RECORD_TORDER program (Transaction SLXT) to create the TR. Remove the other things like other translation from your TR. Kept only for your Domain, then transfer it.
Thanks,
Abhijit

Fixed value/lower limit ' ' reoccurs

Hi,
I am getting the following error when i am activate my domain.
fixed value/lower limit ' ' reoccurs
How do i proceed?
Regards
Shilpi

Hi Shlipi,
Check your inserted values/range in your domain.
Probably you have some lower value that not valid (or empty)
Good Luck
Eli Steklov
Please Reward Points if it Helped

F4 help not reflecting in ALV Grid for fixed values specified in domain

Hi experts,
   As per subject i have a field for which i have assigned 5 fixed values in the domain level (of that field) . The problem is when i am displaying my ALV grid output i need a F4 help and F4 Option for the same is not reflecting and i have assigned in the field catlog as shown bellow.
wa_fcat-fieldname = 'ZDEPLOY'.
wa_fcat-tabname = 'IT_FINAL'.
wa_fcat-f4availabl = 'X'.
wa_fcat-key     = 'X'.
WA_FCAT-SELTEXT_L = 'Deployment Planned'.
wa_fcat-outputlen = '25'.
   WA_FCAT-EDIT = 'X'.
   WA_FCAT-REF_FIELDNAME = 'ZDEPLOY'.
   WA_FCAT-REF_TABNAME = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
for the above field the f4 help is not reflecting.
Intrestingly i have another field which i have declared using the same procedure for which my F4 help (with fixed values ) is reflecting in the same program .with the values as shown below
    wa_fcat-fieldname = 'ZFINAL'.
wa_fcat-tabname = 'IT_FINAL'.
WA_FCAT-SELTEXT_L = 'Final Status'.
wa_fcat-outputlen = '10'.
   WA_FCAT-EDIT = 'X'.
   wa_fcat-ref_fieldname = 'ZFINAL'.
   wa_fcat-ref_tabname = 'ZETMDEPL'.
APPEND WA_FCAT TO IT_FIELDCAT.
CLEAR WA_FCAT.
can u plz suggest me with a solution .
Regards,
Edited by: abhilash aswath on Oct 20, 2010 3:32 PM
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Oct 20, 2010 3:58 PM

hi,
There was a mismatch of characteristics. I resolved by matching the same.

DrillDown in ALV for fixed values of domains

Hi,
i want to create an ALV Grid with an structure that has data elements with domains containing fixed values.
As far as i know, in Table Controls and other dynpro fields refering to such domains, the drilldown function is automatically available.
In an ALV-Grid the values are available with the F4-Button.
Ok, you can select a value, but the value is shown in the grid is the fixed value not the short text of the value like it is in Table Controls. What I did is to implement an conversion exit to show the short text in the grid, but I am not really satisfied.
What I ask you: Is there a possability to show a field of the ALV-Structure with drilldown functionality automatically, when the domain has fixed values?
Thanks in Advance
Michael

Hi Michael,
I think I have found the solution to your problem. When you call the method SET_DROP_DOWN_TABLE of the ALV Grid, you can see that there are two tables parameters (both of which are optional).
You can use the second tables parameter to give the short text of your field-value.
Consider the following code snippet.
==========================
data : lt_dropdown_with_alias type LVC_T_DRAL,
       ls_dropdown_with_alias type LVC_S_DRAL.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'T'.
ls_dropdown_with_alias-value = 'True'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
ls_dropdown_with_alias-handle = '1'.
ls_dropdown_with_alias-int_value = 'F'.
ls_dropdown_with_alias-value = 'False'.
append ls_dropdown_with_alias to lt_dropdown_with_alias.
call method ALV_GRID->set_drop_down_table
            exporting IT_DROP_DOWN_ALIAS = lt_dropdown_with_alias.
==========================
Obviously, <b>int_value</b> is the internal value and <b>value</b> is the text that you want to be displayed.
Hope this helps.
Regards,
Anand Mandalika.
P.S. I'm almost certain that this code will work. If it does, please do reward the points.

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

Domain Value Shot Description instead of Fixed Value

Hi Everyone,
I am having a peculiar issue in Passing domain values from ABAP webdynpro to Interactive forms.
The scenario is as given below.
1> Interactive form is only for display purpose.
2> Passing fields from a Z structure in interactive forms interface.
3> Certain fields in the Z structure are having data elements which are linked to domains.
4> The domains mentioned in point number 3 are having fixed values as well as short descriptions.
5> Fixed values are stored in the tables in R/3 and not short descriptions.
6> I want to display the Short Description in Interactive forms as a text box and not a dropdown value. Since it is just for display purpose, i dont want to display a dropdown value. Currently The fixed values are getting displayed.
I wanted to know if there is some way to do this without using Code.
I have quite a lot of fields and for all of these fields if we select values from dd07t table, Performance would be severely affected.
Please let me know if someone has any suggestions. If you need any more clarifications don't hesitate to ask.
Thanks in advance and Warmest Regards
Mz

Hello Robert,
Thanks for your prompt reply.
Let me try to clarify a bit more.
As mentioned by you, let us suppose that i have a field ZBUKRS with the domain ZZBUKRS having the same fixed values.
In case of Webdynpro ABAP, if i create a dropdown and bind this domain (ZZBUKRS) to the dropdown, when i run the report, i see the short descriptions in the dropdown. When selecting a value, the Fixed value is automatically selected for the selected short description. There is no need to go in for seperate coding to acheive this.
I was wondering, is there any way that a similar thing can be acheived in interactive forms without doing the coding. I know that we can use the FM 'STF4_GET_DOMAIN_VALUE_TEXT'. But since i have a large number of domains, i will have to use this repeatedly.
Hope i have not confused you
Please let me know if any further clarifications are required.
Thanks & with warmest regards,
Mz

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

Finding short text description of Fixed values for value range for domain

Hi,
When I got to Dictionary: Dispaly Domain and click on tab value range; I get the template showing Fix. Val and its associated short text.
I want to fetch the short text for a particular fix. val for a domain.
How can I do that ? What table can I use it ? Or do I need to use some function module ?
Lets say I want to fetch the short text for a given Fix val. for domain VBELN.
Please help me out.

Hi,
You can use Function Module 'FM_DOMAINVALUE_CHECK' to get the fixed values of any domain.
Regards,
Atanu

Domain Fixed values.................

Similar Messages

Maybe you are looking for