Don't have "Queue Assignment" property in BPM

Hello all,
I have two XI systems with the same SP level (PI 7, SP 11), and in one
system I can see the "Queue Assignment" property in the "Edit
Integration Process" screen in the repository, but in the other system,
the property is not there.
I compared the configuration of both systems, and didn't see any
difference.
How can I activate this property on the second system?
Thanks in advance,
Gregory Paris

check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00d9465-ea97-2910-deac-f8aa681eef35
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm

Similar Messages

Queue Assignment property in BPM

Hello all,
I have two XI systems with the same SP level (PI 7, SP 11), and in one
system I can see the "Queue Assignment" property in the "Edit
Integration Process" screen in the repository, but in the other system,
the property is not there.
I compared the configuration of both systems, and didn't see any
difference.
How can I activate this property on the second system?
Thanks in advance,
Gregory Paris

check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00d9465-ea97-2910-deac-f8aa681eef35
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm

How can I dial a Unity subscriber extension when they don't have an assigned IP phone?

I have set up our warehouse staff to share centrally placed IP phones by setting them up in Exchange and as a Unity subscriber and then configured the Call Transfer page to ring the extension of the phone closest to where they work in the warehouse. This works great except you have to go through auto attendant to dial their assigned extension to have it ring where it would be desirable to be able to look them up in the Corporate Directory and dial, but if I do that, it just goes to their voicemail. Is there a way around this?

You could set up a dummy phone record for each user and then use the Call Forward All or Call Forward Unregistered field(s) to forward calls to the phone closest to where they work in the warehouse (just like you have in Unity for transfers). Then if you look the user up in the directory and dial them, the call forward would take effect.
Hailey
Please rate helpful posts!

Assign programmatically a BPM role to a user

Hello everybody,
I want extend the security administration of the workspace.
I have investigated tha you can manage the users programatically, with a jmx connection.
But i don't kow how assign progrmatically a BPM role to a user.
Thanks,
Regards!

hi,
try this one.
assign this role to the user.(this user will not be abe to access that transaction).
in s_tcode, we have to define the "from and to" excluding vao1!.
hope this might help you.

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

[svn:fx-trunk] 12878: When sub-components don' t have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage .

Revision: 12878
Revision: 12878
Author:   [email protected]
Date:     2009-12-11 19:07:40 -0800 (Fri, 11 Dec 2009)
Log Message:
When sub-components don't have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage.
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/VideoPlayerAccImpl.as

Michael,
"Michael Caughey" <[email protected]> wrote in message news:413f0af6$1@mail...
If I'm doing something wrong what is it? Obviously there is something
different about how I configured my environment a year ago.What happens if you bring down ms02?
Regards,
Slava Imeshev

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

Hi Atiq
Now that's concerning.....!!!
This error usually shows up when the workflow is not able to resolve the outcome of the decision....no branch is there for the selected decision.
Since, the standard workflow is also going in an error....this is something wrong...
Did anyone play around with the standard decision task?
I am not sure if this will help, try generating the task and standard workflow by executing the FM SWD_WFD_REPLICATE_FROM_9999 from SE37 directly. First, generate the task (give full task ID TS00008267 as the input and execute; and then the standard verification workflow in the next exec).
Try and test again...if this works, generate your custom workflow again like this.
The above is a pure guess and I am not sure if this will work.
Regards,
Modak

[svn:fx-trunk] 10578: Fix the SkinTest.mxml in the sparkTest project: use backgroundColor style as we don't have a property anymore.

Revision: 10578
Author:   [email protected]
Date:     2009-09-24 15:02:04 -0700 (Thu, 24 Sep 2009)
Log Message:
Fix the SkinTest.mxml in the sparkTest project: use backgroundColor style as we don't have a property anymore.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: Evtim
Tests run: build
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/sparkTest/src/SkinTest.mxml

I finally found how to set a default skin to a custom component so that users of my component will not have to set again the skinClass value of my component.
You have to create a defaults.css file at the root of your library and tell the compiler to take it into account.
The remaining problem is about the compiler. There are some steps before success and they are a bit mysterious/unclear....
I found 2 or 3 blog articles explaining those steps but the compiler arguments to use are all differents in each article...
Here are the links I found:
http://www.unitedmindset.com/jonbcampos/2010/05/12/creating-custom-spark-components/
http://www.betadesigns.co.uk/Blog/2010/05/14/default-skin-for-custom-flashbuilder-componen ts/
http://flexdevtips.blogspot.com/2009/06/default-stylesheet-in-swc-flex-library.html
Following the first article guidelines has been successful for me but I'm not marking this topic as Resolved because I'd like some answers about this whole thing...

Cisco Security Manager some firewalls don't have global policies assigned for the base definitions

Hello Experts,
In CSM 4.6 I noticed, some firewalls don't have global policies assigned for the base definitions like (SSH/SNMP/syslog/AAA,etc).
Unfortunately in Cisco CSM each policy has to be applied individually, it's easy to miss one policy or another. Is there any better way to verify and get the list of devices, which does not have SSH/SNMP/syslog/AAA
Thanks,

Sorry if this comes to late, I just now came across this thread. I have rtorrent and rutorrent sunning successfully on my x64 Arch Linux install.
Try putting the "SCGIMount /RPC2 127.0.0.1:5000" line in your httpd.conf file right after the LoadModule lines (it's line 124 for me).
I seem to recall it not working when I put it at the end of the file.
Best of Luck!
Martian

Record put for property "***" must have an assignment in property "mdex-pro

Hi all,
I met a problem for the EID2.3, when i follow the video step by step, which provided by the OTN
Getting started with Endeca Information Discovery , Part 2 :Loading and Viewing Data, 2.2 - Load one Data Source via Integrator
I met a error after run the graph.
Could anyone tell me what does this mean?
*ERROR [SocketReader] - Received error message from server: Record put for property "FactSales_OrderQuantity" must have an assignment in property "mdex-property_Type"*_
Thanks in advance!
Best Regards,
Bruce Lin
I post all the logs as below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Linux, architecture amd64, Java version 1.6.0_20, max available memory for JVM 882944 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Test.grf
INFO [main] - Graph revision: 1.7 Modified by: endeca Modified: Wed Jul 11 16:26:18 SGT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Test)
INFO [main] - Initializing connection:
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1341992445224_0
INFO [WatchDog] - Pre-execute initialization of connection:
INFO [WatchDog] - DBConnection driver[org.jetel.connection.jdbc.driver.JdbcDriver@1624e801]:jndi[null]
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [WatchDog] - ---------------------** Start of tracking Log for phase [0] **-------------------
INFO [WatchDog] - Time: 11/07/12 16:26:49
INFO [WatchDog] - Node ID Port #Records #KB Rec/s KB/s
INFO [WatchDog] - ---------------------------------------------------------------------------------
INFO [WatchDog] - Sales Facts SALES_FACTS RUNNING
INFO [WatchDog] - %cpu:0.17 Out:0 29281 5317 0 0
INFO [WatchDog] - Create Spec CREATE_SPEC RUNNING
INFO [WatchDog] - %cpu:0.12 In:0 29281 5317 0 0
INFO [WatchDog] - Out:0 27705 5576 0 0
INFO [WatchDog] - Bulk Load to Data StoreBULK_LOAD_TO_DATA_STORE RUNNING
INFO [WatchDog] - %cpu:0.01 In:0 27705 5576 0 0
INFO [WatchDog] - Reset Data Store ENDECA_RESET_DATA_STORE0 RUNNING
INFO [WatchDog] - %cpu:..
INFO [WatchDog] - ---------------------------------** End of Log **--------------------------------
INFO [WatchDog] - ---------------------** Start of tracking Log for phase [0] **-------------------
INFO [WatchDog] - Time: 11/07/12 16:26:54
INFO [WatchDog] - Node ID Port #Records #KB Rec/s KB/s
INFO [WatchDog] - ---------------------------------------------------------------------------------
INFO [WatchDog] - Sales Facts SALES_FACTS RUNNING
INFO [WatchDog] - %cpu:0.10 Out:0 40745 7398 2270 412
INFO [WatchDog] - Create Spec CREATE_SPEC RUNNING
INFO [WatchDog] - %cpu:0.07 In:0 40745 7398 2270 412
INFO [WatchDog] - Out:0 40436 8140 2521 507
INFO [WatchDog] - Bulk Load to Data StoreBULK_LOAD_TO_DATA_STORE RUNNING
INFO [WatchDog] - %cpu:.. In:0 40436 8140 2521 507
INFO [WatchDog] - Reset Data Store ENDECA_RESET_DATA_STORE0 RUNNING
INFO [WatchDog] - %cpu:..
INFO [WatchDog] - ---------------------------------** End of Log **--------------------------------
INFO [WatchDog] - ---------------------** Start of tracking Log for phase [0] **-------------------
INFO [WatchDog] - Time: 11/07/12 16:27:03
INFO [WatchDog] - Node ID Port #Records #KB Rec/s KB/s
INFO [WatchDog] - ---------------------------------------------------------------------------------
INFO [WatchDog] - Sales Facts SALES_FACTS FINISHED_OK
INFO [WatchDog] - %cpu:0.05 Out:0 60855 11049 2355 427
INFO [WatchDog] - Create Spec CREATE_SPEC FINISHED_OK
INFO [WatchDog] - %cpu:0.04 In:0 60855 11049 2355 427
INFO [WatchDog] - Out:0 60855 12251 2391 481
INFO [WatchDog] - Bulk Load to Data StoreBULK_LOAD_TO_DATA_STORE RUNNING
INFO [WatchDog] - %cpu:.. In:0 60855 12251 2391 481
INFO [WatchDog] - Reset Data Store ENDECA_RESET_DATA_STORE0 RUNNING
INFO [WatchDog] - %cpu:..
INFO [WatchDog] - ---------------------------------** End of Log **--------------------------------
ERROR [SocketReader] - Received error message from server: Record put for property "FactSales_OrderQuantity" must have an assignment in property "mdex-property_Type"
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node BULK_LOAD_TO_DATA_STORE finished with status: ERROR
ERROR [WatchDog] - Node BULK_LOAD_TO_DATA_STORE error details:
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 20
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - Post-execute finalization of connection:
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 20 138827
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 25 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
Edited by: 943609 on Aug 1, 2012 7:34 PM
Edited by: 943609 on Aug 1, 2012 7:45 PM

This error is saying that a user create attribute "FactSales_OrderQuantity" is missing a system property "mdex-property_Type". These system properties are how the index defines the user attributes and when one is missing, in this case the type, the mdex does not know how to handle the incoming data for the attribute. In this case I believe the problem is cause by having the "Reset Data Store" component in the same phase as the "Bulk Load to Data Store". The Reset data store tells the index to delete all records and to clear all the attribute's metadata (properties). Since this graph is also trying to load data via the bulk load while at the same time resetting the index and all the system properties.
To resolve this issue you should have the reset component in a separate phase, or a graph all to itself so it always executes in isolation.
Pete

ARD won't access Macs that don't have assigned passwords! Any workaround?

I posted about this issue seven or eight months ago, and I'm still waiting for a solution.
I have several Macs in my home network, and I'd been successfully using ARD to deploy software to them -- until I bought two G5s late last spring and deliberately chose not to give them passwords. No one uses my machines but me, and I find passwords a PITA. I have to issue thousands of commands a day, and I don't need the additional steps of having to enter a password when I want to accomplish certain tasks. So I decided not to have passwords on the new machines.
Well, that was perfectly fine until I attempted to use ARD in the usual manner. But ARD refuses to access the non-password machines! It's preposterous!! It "sees" the machines and knows their names, but it refuses to interact with them -- simply because they don't have passwords. And please note: I can access those same password-less machines perfectly fine via the Finder! I simply leave the "password" field blank, click "Connect," and voila! But the "sophisticated" (and expensive) ARD is dumber than the Finder.
I can't begin to understand the point of this limitation. The Macintosh experience is all about customization and user-friendliness. And sure, I understand the usefulness of passwords if they are needed. But if the user does not need passwords, and if the Macs all work perfectly happily without them, then why does ARD refuse to work with a machine that the user (or more specifically, the administrator) has chosen to operate without a password?
It is thoroughly illogical. Apple is typically such a smart company. But this is frankly one, giant, dumb mistake.
So now, the software I purchased no longer works, simply because I'd prefer not to have passwords on my own computers. And I've been forced to revert to the archaic method of software distribution: via the Finder, one computer at a time! Can someone explain what possible benefit this ridiculous limitation might have?
On second thought, forget the explanation. That's Moot. What I need is for this to be fixed, but until then, a workaround. Any suggestions?
(And Apple, PLEASE, PLEASE fix this!)

Yes. Remove them from the Master List, then re-add
them there. Just enter the admin name—no password.
Will work until the remote computers are rebooted or
ARD is relaunched.
Hello, Ast A. Moore,
I am happy to report that your suggestion worked! Frankly I'm in shock. I've been "crippled" for several months. I should add one detail, however, for anyone else who might read this thread:
Upon re-adding a deleted computer, a sheet appears with a checkbox that says "Verify Remote Desktop name and password before adding." Since I am not using passwords, it seemed logical to uncheck that option, but that was the wrong move. It must be checked in order for this method to work.
It would be ideal if ARD would save these settings, even after a reboot or relaunch, because repeating this delete/re-add step for several machines is tedious. But until Apple updates ARD, I do appreciate this workaround. Thanks again.

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

The" location svc. " on my iPhone 4S is disabled w/out me knowing ,now I have no GPS,but everything else works fine. it all happened after the latest update from Apple . The phone asks me to put a 4digit code (I don't have) to unlock the restriction on it

Please help !
It's been almost a month that the LOCATION SERVICE on my iphne 4S has been turned off and there's a restriction on it . Which requires a 4 digit code that I don't have and no one seeme to be able to help me on this .
It all happened after I got the latest Apple iphone updates installed . Just a note here, except for some photos and camera, especially the the flash for taking pictures having the mind of it's own ( wont flash most of the time even when you turn on the flash ) , ALL OTHER FUNCTIONC SEEM TO BE WORKING OK .
I've tried backing up the phone on my computer and restoring it SEVERAL TIMES w/no success . The Apple store tried TWICE and cleared everything in my phone and we started it w/the factory settings,BUT BECAUSE I NEED TO HAVE ALL MY CONTACTS AND OTHER PERSONAL INFO'S, I HAVE TO RESTORE IT TO MY OWN SETINGS .
The problem is that when I restore the phone, it restores all my previous setting which PUTS EVERYTHING BACK IN TO MY PHONE THE WAY IT WAS BEFORE THE BACK UP AND KEEPS ASKING FOR THE 4 DIGIT PASS CODE AGAIN . I have no control of pick and choose what should be backed up .
I HAVE TRIED EVERY POSSIBLE CODES THAT I COULD THINK OF AND IT KEEPS LOKING ME OUT ONE HOUR AT A TIME .
Any one out there can help me w/this I would be greatful to you .
E FARIAB

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

I need to migrate CUCM 8.6.2 from 6.0.1 but don't have any DVD of old 6.0.1

Dear Experts,
I have new project which has been abandon for long and assigned to me recently.
I know what is the steps we need to work.
1. DRS from current CUCM version
2. Install same version of 6.0.1 to new Server
3. Backup from step1.
4. Upgrade to 8.6.2(it is not direct support, so I have to upgrade to middle version first)
But customer doesn't have current CUCM(6.0.1) version of DVD and I cannot find the version from Cisco site as well.
1. Can I export BAT from old version and import BAT to new version ? will it work ?
2. I don't have any bootable version either of old or new, so I need to make bootable after download from Cisco site.
I googled and some site said I can copy bootsector from bootable DVD and copy to new DVD, in this case even though it is not same version, for example, if I copy from 10.5 version and copy to 8.6.2, does it make bootable DVD ?
3. How can I remove all configuration on CUCM ? is it CLI command if I can ?
Thanks in advance
Jason

Hi Jason,
There is a way, however if you got into any bad situation or needed any help during the process TAC WILL NOT be able help.
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
Try this method, and you should be able to create bootable DVDs from non-Bootable ones.
Secondly, you may raise a TAC SR and request them to release the Bootable media for 6.0.1
HTH

Tutorial: Virtual Numpad on laptops that don't have one built-in

Hi all! After getting so much good help from the people on Arch forums, I thought it was time to give back.
You remember how on older laptops, you would hit numLock and a portion of your keyboard would become a numpad? (specifically, the 789uiojklm keys) Well, recently I got a new Lenovo Y40 and I never knew how much I loved having a numpad until I found that my new laptop didn't have one. Unfortunately, the Y40 does not come with this feature out of the box, but luckily, Arch Linux is on our side. I am going to tell you how I set up my own virtual numpad using tools that come built-in with X.
Before we start, I should point out that everything I learned in order to do this was found here:
https://wiki.archlinux.org/index.php/X_ … _Modifiers
From the warnings section:
It is possible (and, in fact, easy) to end up disabling some keys on your keyboard for the current X session while working with XKB. This includes modifiers, cursor arrows and Enter key, as well as C-A-Backspace and C-A-Fx combinations. Make sure you have some way to terminate the session without using your keyboard.
While it is rare, changing XKB configuration can sometimes hang or crash X server. Make sure you can handle it. Having some way to killall X or reboot the host remotely may be a good idea.
Stop xxkb, or any other layout switching applications. xxkb actively changes XKB state. Debugging both at the same time is not a good idea.
And finally, be warned: it is very easy to get used to custom layout.
If you want to learn more, that wiki article is the best available xkbcomp documentation for people who aren't X developers (lit. me). And with that, let's get started!
Getting Set Up + xkb Background Info
The first thing we will do is run the command
xkbcomp $DISPLAY outfile.xkb
This will spit out the code that represents the current keyboard layout. Our end goal will be to code in what we need into this file, and upload it back to the X server. I recommend editing this file in an editor with C/C++-style syntax highlighting, since it might prevent you from making syntactical errors.
There are many sections to the .xkb file, but we will only concern ourselves with xkb_types, xkb_compatibility, and xkb_symbols.
xkb_types lets you define types for each of the keys on your keyboard. For example, if you use Canadian Multilingual Standard (like I do) most of your keys are given the type "EIGHT_LEVEL_SEMIALPHABETIC". When a "special key" like ctrl, alt, caps lock, etc is pressed, in xkb_types, we map these modifiers to "LevelN", and different combinations will mean different things for different types. For 8-level-semialphabetic, no special keys pressed is "Level1", Shift is "Level2", etc.
If we jump forward to xkb_symbols, and look at the keys, we see that each key is assigned a type, and an array. The first element in the array is what symbol the key represents for Level1, the second is the symbol for Level2, etc.
Finally, xkb_compatibility allows us to set which keys turn on which modifiers (as well as other things).
So with that, let's get started
Editing the layout
We will begin by editing the xkb_types section. First, we will pick an unused type from xkb_types (you could create your own, but it will be more work). It doesn't matter which type you picked, so long as none of your keys use it. Take down the name. Now delete the unused type, and in its place, copy paste the type that your keys used already. Finally, change the name of the copy to the type you deleted. For example, I deleted EIGHT_LEVEL_ALPHABETIC, copied and pasted EIGHT_LEVEL_SEMIALPHABETIC, and changed the name on the copy back to EIGHT_LEVEL_ALPHABETIC. Next, change the modifiers variable to accept NumLock. This is done by concatenating '+NumLock' before the semicolon. Lastly, we will bind it to a level. You can create a level, or simply pick one that you were not using, and add the line (where N is the desired Level)
map[NumLock]= LevelN;
Next, we will turn our attention to xkb_compatibility. Simply copy paste this code into the xkb_compatibility section, taking care to replace Scroll_Lock with the key you wish to use to toggle the numpad:
interpret Scroll_Lock {
virtualModifier= NumLock;
action= LockMods(modifiers=NumLock);
Now comes the more tedious part of editing the layout. For every key that is part of your virtual numpad, change the type to the copy we made earlier. (In my example, I would change EIGHT_LEVEL_SEMIALPHABETIC to EIGHT_LEVEL_ALPHABETIC). Finally, locate the Nth element in the array (indexing from 1) where N is the level you bound the NumLock modifier to in xkb_types. Replace this with the desired nunmpad key. For your convenience, here is a list of the numpad keys I used:
KP_0
KP_1
KP_2
KP_9
KP_Add
KP_Subtract
KP_Divide
KP_Multiply
KP_Decimal
For example, here is the entry for my 'u' key (note the KP_4):
key <AD07> {
type= "EIGHT_LEVEL_ALPHABETIC",
symbols[Group1]= [ u, U, NoSymbol, NoSymbol, downarrow, uparrow, NoSymbol, KP_4 ]
If you are wondering what to do if you want to bind numpad keys to your Fx keys, I added a note at the end of the post.
Uploading the layout to the X Server
And now the moment of truth. First, run
xkbcomp myNewLayout.xkb
This will NOT upload to the X Server yet; it will only compile the file and check its syntax. One cryptic error I got was because I used C-style /*block quotes*/. xkbcomp doesn't like these, but it doesn't mind //this kind of comment. If we have no errors, we can now upload with
xkbcomp myNewLayout.xkb $DISPLAY
Well, go ahead and try it out, there will almost surely be some really neat tweaks you can do.
Extra Stuff/Notes
When you hit Scroll_Lock (or whichever key it was you chose) it locks the new type we made to LevelN. This is why we went to the trouble of making a new type, so that the rest of the keyboard would not be locked in LevelN mode. For example, on my setup, I first tried this without creating a new type, and found that the rest of my keyboard was not behaving normally, since it was also bound to Level8 (my desired numpad level). So, I created a new type for my numpad keys so that the rest of the keyboard would still act in its usual manner even when I had the numpad on.
If you're wondering, I bound KP_Multiply and KP_Divide to my F8 and F9 keys. However, I didn't need to change the type, since the level I chose (Level4) also caused the Fx keys to act normally (except if I rebound them). That is, before I changed anything, all the Fx had the corresponding Fx key bound to Level4. I simply changed the Level4 keybinds for F8 and F9. This meant that when I activated the virtual numpad, F8 and F9 were KP_multiply and KP_Divide, and the rest of the function keys were what they were usually.
Hopefully, this tutorial won't only help you to make a virtual numpad, but maybe help some other newbies like me to further customize their system. And the Arch Wiki author is right, you really do get used to the new layout and it becomes frustrating to use other computers!
Happy trails.
- Marco
Last edited by mahkoe (2014-11-02 12:17:49)

Ikester wrote:
Re: My laptops that don't have a linksys card, but built in wireless can stay connected to WEP
OK since your security is set to WPA why do you want to go to WEP? DS? If everything is configured correctly you should not have to change anything. If you are connecting another device and forgot what your WPA setting were just go into the router and take a look see.
1. I set up everything, its all fine and ok
2. The DS can't connect to WPA, only WEP or Open
3. I know what my WPA settings are and the codes to both settings

Don't have "Queue Assignment" property in BPM

Similar Messages

Maybe you are looking for