Don't want a numeric field to round

Hi
I am having a rounding problem. It is a simple numeric field of 20 "combed" boxes. The patterns are all set to num{zzzzzzzzzzzzzzzzzzz9} (I have tried all 9's also). There are no events or equations set on the field and I have it listed as a float but have tried integer too. But if I fill out the field completely for testing, the last 4 or 5 numbers are rounding up (converting the last 3 or 4 numbers to zero). And always rounding up, never down. Oddly, as I try to retype the zero's to something other than zero, it will actually continue to increase the rounded number...if that makes any sense. It only occurs if I fill out the field completely.
I have tried creating the field from new thinking that maybe this field held a calc or setting somewhere from a previous form but with the same result.
What am I missing?
Britt

Actually there is an limitation on number of characters it can handle. As of today it cannot handle beyond 15 characters due to its limitation.

Similar Messages

Is it possible to use the status of a checkbox to change the fillcolor of a numeric field?

I have read through most all of the threads, but found none pertaining to my specific question. I would like to change the fillcolor of a numeric field based upon the status (on/off) of a checkbox located on a different page. In other words, if the checkbox is checked I want the numeric field to be yellow with a solid (thin) black border. I have tried:
If (CheckBox1.rawValue="1")
{this.fillcolor="R,G,B";} else
{this.fillcolor="250,250,250"};
I haven't gotten the correct RGB values yet for the color I am using, that is why the script has "R,G,B"
I am pretty new at javascript and have been learning a lot from the forums, but I just can't seem to figure this one out. Any help would be greatly appreciated. Thanks

Give this a go...
// form1.page1.cb::click - (JavaScript, client)
if (this.rawValue == 1) {
xfa.resolveNode("form1.page1.nf.ui.#numericEdit.border.fill.color").value = "255,255,0";
form1.page1.nf.border.edge.color.value = "0,0,0";
else {
xfa.resolveNode("form1.page1.nf.ui.#numericEdit.border.fill.color").value = "255,255,255";
form1.page1.nf.border.edge.color.value = "255,255,255";
Don't forget to make your form a dynamic form.
Steve

Adobe changes my numeric field to include commas when validation fails

Adobe changes my numeric field to include commas when validation fails. My numeric validation setting is num{zzzzzzz9.99}. I want my numeric field to display as 99999999.00, no commas and only to have 2 decimals places. I added this validation to the Display, Edit, Validation and Data tabs under the validation pattern dialog box.
When validation fails, adobe changes the display of the field to include commas and drops the decimal places:
999,999,999
How can I prevent this from happening? Any feedback is greatly appreciated.
I've also added a change event to the field as well:
\\only allows numbers and period.
if (xfa.event.newText.match(/[^0-9.]/))
xfa.event.change = "";
\\only allows 11 characters to be entered.
var maxLength = 11;
if(xfa.event.newText.length >maxLength)xfa.event.change = "";

I want it to display only numbers followed by 2 decimal places.
999999999.00
If I type all numbers in my field like 999999999999 and I go over the character limit of 11. My validation fails and then my numeric field is displayed with commas, 999,999,999 without the 2 decimal places. Is there a way to prevent adobe from automatically changing my fields?

Leading zeroes in a Numeric Field, Don't want.

I have a Numeric Field set up to hold 9 numbers for a zip code using Display Pattern 999999999.
When I only put in 5 numbers I get leading zeroes.
I only want to display the numbers I put in.
Sometimes I will have zip code of 9 numbers and other times only 5.
What am i missing?
Thank you.

Thank you, it worked. I used the TextField and set up the Display Pattern of all z's.
This way I'm able to enter the hyphen and the last 4 digits of the zip and if there is no extra 4 digits then the 5 zip code will appear without zeros.
Thanks again.

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

Macs with a FireWire port will also boot happily from an External drive. You don't even need to open the MacBook.
Some users buy a drive they would like to have as a future Internal drive, and also buy an external enclosure. They get the External set up the way they want it, then swap with the Internal drive.

Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.

Stop and refresh buttons (one will disappear while the other is active). I have found numerous websites that just don't want to load on the first try, now I am unable to refresh it (usually in a new tab) because the button disappears. BTW 255 limit is BS.

You can try to press the ESC key to stop loading the page if you see the Stop button instead of the Reload button. You can also reload the page via F5 or Ctrl + F5 (cache bypass).
Firefox 4.0 has a combined Reload and Stop and Go button that appears at the right end of the location bar.
To restore the Firefox 3 appearance you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Move the Reload and Stop buttons to their previous position at the left side of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

I don't want to fill the Actual GI Date field automatically when GI

Hi experts
When I post good issue a delivery, Actual GI Date field is filled automatically.
I don't want it.
I don't want the Actual GI Date field to be filled automatically.
Please, let me know how to.
With config or user exit, anything possible.
Thank you.

Thank you for your reply Vinod.
But it's still not the exact answer I wanted.
1.
Subroutine USEREXIT_SAVE_DOCUMENT_PREPARE in MV50AFZ1 is not useful for this situation.
The field WADAT_IST(Actual GI Date) already has a value(today's date which is automatically inputted by system) in that subroutine.
So it's impossible to know whether Actual GI Date is manually inputted or not.
2.
The BADI you mentioned does not exist in our site.
Regards
Ji yeob

Java rounds number i don't want?

class CombatCalc {
    public static void main(String[] args) {
         int att = 99;
         int str = 99;
         int def = 97;
         int hp = 99;
         int pray = 74;
         int mage = 97;
         int range = 89;
         int a = def*100;
         int b = hp*100;
          int c;
              if (pray % 2 ==0){ //number is even
                    c = pray * 50;
               }else{
                    c = ((pray - 1) * 50);      //number is odd
         double basecomb = ((a + b + c)/400);
         int d = att*130;
         int e = str*130;
               int f;
               int g;
              if (range % 2 !=0){ //number is odd
                    f = ((range -1)+(range*2))*65;
               }else{
                    f = range*195;
               if (mage % 2 !=0){ //number is odd
                    g = ((mage -1)+(mage*2))*65;
               }else{
                    g = mage*195;
          double meleecmb = 0;
          meleecmb = ((d+e)/400);
          double magecmb = 0;
          magecmb = g/400;
          double rangecmb = 0;
          rangecmb = f/400;
          double cmb = 0;
          if (meleecmb > rangecmb || meleecmb > magecmb){
                cmb = basecomb + meleecmb;
          }else if (rangecmb > magecmb || rangecmb > meleecmb){
                cmb = basecomb + rangecmb;
          }else if (magecmb > rangecmb || magecmb > meleecmb){
                cmb = basecomb + magecmb;
        System.out.println("Base= " + basecomb); // Display the string.
        System.out.println("Melee= " + meleecmb); // Display the string.
        System.out.println("Range= " + rangecmb); // Display the string.
        System.out.println("Mage= " + magecmb); // Display the string.
        System.out.println(cmb); // Display the string.
}It rounds all numbers i get, If i take a calculator and calculate them manually, i get other results, for example basecomb = ((a+b+c)/400), in this case i get (9900+9700+3700)/400=58,25, But it prints out 58. For everything, it rounds down, I don't want it to round, What should i do? Is there a mistake somewhere?

The problem here is that you're using integer division.
Even though you've created basecomb to be a double, the inputs a, b, c, and 400 are all integers, so Java assumes you are doing integer division, and truncates the results.
The easiest way to fix this is to change 400 to 400.0 or 400f, both of which tell java that it is a floating point number, so it will perform floating point division and won't truncate the result.
- Adam

Connecting selection of radio button to a text or numeric field

Hi. I am using LiveCycle Designer 8.0 and I am trying to define object properties that will allow the selection of a radio button to populate in a numeric data field at the bottom of the page. I was able to write the script to have that happen with drop-down lists, but I can't figure out how to write the script for the radio button. I also don't know if the script is supposed to apply to the radio button itself or the numeric field where I want the result to show-up. Can you please help me with some sort of an example script? Thanks.

Hi Jen,
I would recommend that you amend your workspace in Designer. You can show/hide palettes from the Window menu.
Here are some pointers (which are optional):
This is the hierarchy palette and is very handy when working with forms. You can select objects quickly and drag objects around.
This is the Object palette, which makes it easy to drag objects onto the page.
The main space with tabs for Design View, Master Pages, XML Source (you should not need this) and Preview.
You can select objects in EITHER the page or the hierarchy view and then change properties in other palettes.
The Script Editor is very important when you start to add functionality to your form. It is visible on your screen shot, but it is limited to one line in height. So I would recommend that you drag this down so that you can see a few lines of script. The Show dropdown in the Editor allows you to look at the script in various events. In the example I posted, there is script in the click event.
Object palette (and Font & Paragraph palettes). These will allow you to make changes to various properties, depending on the object that is selected.
You will see from the screenshot that you can position and stack the palettes to suite your screen and workflow.
Now, in relation to your screenshot:
You have selected a single radio button in your group. You need to select the whole exclusion group, this is easy in the hierarchy palette.
In the Object > Binding palette you have ticked the Specify Item Values (good), but you need to edit the values to match the Display Items. For example for item "$85", the specified value should be "85".
For starters, I would recommend that you open a few of the palettes and then have a look at my example and the screenshots. Hopefully that will clear it up for you.
Niall

At new- command - making non-numeric fields as ******* how to correct this

Hi,
I am using the following code.
Tables : vbap.
DATA: t_vbap TYPE STANDARD TABLE OF vbap,
      x_vbap TYPE vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT * FROM vbap
    INTO TABLE t_vbap
    WHERE vbeln IN s_vbeln.
LOOP AT t_vbap INTO x_vbap.
    at new vbeln.
      write:'new vbeln'.
      ENDAT.
ENDLOOP.
In debugging mode, the non-numeric fields on x_vbap becomes ****
I want to know whether this can be done using oops.. any methods available for at new
Moderator message: please search for available information/documentation before asking (as you can tell from some of the replies so far)
locked by: Thomas Zloch on Oct 1, 2010 3:25 PM

see documentation:
"If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa. "

Is there a script that would allow unique disc names on double albums? (I don't want to put them in the album title or comments.)

I have iTunes 11.2.2, and I've recently made use of iTunes' "disc x of y" feature, instead of entering the disc number in the album title like I used to. I made this change because putting disc numbers in the album-title field makes the two discs appear as two separate albums, with the artwork appearing twice, which I didn't want. The downside of using the "disc x of y" feature, however, is that for double albums where the two discs have unique titles, rather than the default "disc one" and "disc two" -- say, for example, the Red Hot Chili Peppers' album Stadium Arcadium, where the discs are called "Jupiter" and "Mars" -- there is no way to label the disks with their unique titles and still keep them within one album entry. I don't want to put these titles in as a comment or anything like that either. What I'm really wondering is whether it is possible to write a script that would allow me to change where it reads "disc 1" to a unique title, at least within the album section of iTunes.

Certain tags are limited as to format. I am pretty sure the disc number field only allows numeric entries. You can send feedback to Apple suggesting changes in iTunes but since this is a somewhat unusual feature I doubt it will be high priority.
http://www.apple.com/feedback/itunesapp.html

Calculating on Numeric Fields

It was very easy to add a calculation field in previous versions of Adobe. This one has got me. I'm trying to create a field that sums other fields. I don't know where to add the script or the language. Any assistance would be greatly appreciated.

Add the script in the calculate field of the field that you want to display the calculation, ie something like
this.rawValue = form1.blaa.rawValue + form1.foo.rawValue
(where blaa and foo are the fields that you want to sum)
make sure all the fields are decimal fields or numerical fields if you want to sum them.
(oh, and you can set the text field to be Calculated in Object, Value, Type, but this is not essential)

PARTIAL SEARCH ON A NUMERIC FIELD

Hi,
i have one field zzoldwbs which is a numeric field. i want to have a wild card on that field like when a user enter 1* so all the data starting from 1 should be retrieved.the field have a data of 10digits and user can apply wild card on any digit .but i am failing to use wild card as it is very complicated so..how to use wild card on a numeric field.

Yes, you mustn't change your original field, but you can define a 10 char help field where you fill in your field content from your numeric field and search on this field! I don't think that your search wil be available in the numeric field, especially when you are looking for a (non-leading) 0 (zero).
Regards,
Klaus

Value Range for numeric field

I'm fairly new to LiveCycle, I've used it to make forms for a bit, but am now hoping to make the forms much more advanced. I'd like to know the best way to set a value range/parameter for a numeric field? I want the filler to be restricted to a range of $300 to $10,000 and if they try to enter below or above that value they would receive an error message. I've looked at all the beginner material and am trying to get introduced to FormCalc and/or JavaScript but not fully comprehending the best/complete method (any guidance on where to start is also greatly appreciated).
Thanks, Ed

if (((300 < this.rawValue) && (this.rawValue < 10000)) || (this.rawValue == null)){
true
} else {
this.rawValue = null;
app.alert("Please enter a value between 300 and 10.000")
I changed some things though... ^^
If you want 300 / 10 000 to be true too then set <= instead of <.
You can also change the app.alert message as you want.
If you don't add the null in the beginning you might get an error message if it's on the validate event. If it's in the exit there shouldn't be a problem...
Though this is just a little different from Paul's original solution.

Don't want a numeric field to round

Similar Messages

Maybe you are looking for