Double type for output

I need the Celcius output to be two decimal places. When I enter
75 for Fahrenheit the result shows 23.88888888.
      //  Performs the conversion when the enter key is pressed in
      //  the text field.
      public void actionPerformed (ActionEvent event)
         double fahrenheitTemp;
        double celciusTemp;
         String text = fahrenheit.getText();
         fahrenheitTemp = Double.parseDouble(text);
         celciusTemp = (double)Math.round(fahrenheitTemp-32) * 5/9;
        resultLabel.setText (Double.toString(celciusTemp)); 
      }

You could use Class DecimalFormat.
          double number = 1.123456789;
          DecimalFormat df = new DecimalFormat("0.00");
          String formatted = df.format(number);

Similar Messages

  • Cannot find PDL type for output device LOCL in J1INCRT

    Dear all
    I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing)  the error
    cannot find PDL type for output device LOCL
    we are using ECC6 ,oracle 10g  and windows 2003
    Kernel release    701
    Please suggest how to solve 
    Regards,
    Kumar

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • Cannot find PDL type for output device '(Printer name)'

    Hi,
    After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
    Cannot find PDL type for output device '(Printer name)'
    Message no. FPRUNX113
    Diagnosis
    No PDL type has been found for the specified output device.
    System Response
    Error message
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    For more information, see SAP Note 685571.
    Any input will be off great help...
    Regards
    Pooja

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • Printing error with t-code j1inmis: Can not find PDL type for output device

    Hi,
    When using tr.code j1inmis,when we seeing the print preview iam getting below error.
    The error with my system show the details as follow :
    Cannot find PDL type for output device LP01.
    My system is only abap stack.Guide me for the same how to resolve this.
    Thanku

    Hi,
       When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
    When I check The Test : FP_TEST_00 iam getting below error
    ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
    But
    When I check The Test : FP_PDF_TEST_00 its working fine.
    And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
    When i check with destination iam getting error :  SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
    Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
    Thanku

  • Boolean & Double types for Data Objects

    Are the Boolean and Double types going to be supported/implemented as usable types for Process/Project data objects?
    The option is available for each of these in JDeveloper, but they become highlighted in red when you select them and if you accept they get converted into String types. I'm not sure if this means this isn't implemented yet or it won't be supported. If they're not supported types they shouldn't be displayed as options.

    That is currently I bug that I found as well. If you type in the type name manually as Bool that should work. For Double I think it is either Real or Decimal. Once you type in these values the red will go away and they will work.

  • Double type for request.getParameter

    Hi , I have a page to get a parameter which is a double
    I declare :
    Double score = request.getParameter("score") == null ? "" : request.getParameter("score");
    But I got error :
    incompatible types found; java.lang.String, required:java.lang.Double.
    Any idea how to solve this.
    I appreciated for any solution.
    Thank you very much in advance.

    request.getParameter always returns a string, so you'll have to convert it to a double.
    Something like this:
    String score = request.getParameter("score");
    Double score = (score == null) ? 0 : new Double(score);

  • Condition Type in an Invoice for Output tax

    Hi,
    In our Invoice we have different condition types for Output tax. These are the condition types :- MWST, IDM2, ZVLT and IDM3. All thse condition tpye refer to Output tax, although only MWST holds the actual value. But there is certain setting (i guess structure ikomv) which is sending all the condtion types in the IDOC. As the remaining conditon types are not required it is further giving an Error in XI. Please tell us which is the transaction that configures these condtions  and also the required changed in our configuration.
    regards,
          Milan Thaker

    I think this can be handled by adding a filter by condition type in the distribution model. See transaction BD64.

  • Proper Data type for transferring XML from ABAP to XI

    Dear Colleagues,
    I have a question on how to wrap XML data, that itself contains an encoding
    declaration, so that it will be properly transferred to XI.
    XML Generation: "always use X"
    I have searched a lot on SDN and other resources but could not find
    information, describing how a web service should wrap unicode-data when
    making it available to XI. The XML processing group emphasizes that all generation of XML should be done using X-bases (HEX) datatypes in ABAP and preferably using UTF-8 as ancoding. This by itself is not a problem.
    But transferring UTF-8-XML - through which interface?
    When a webservice provides an XML Stream and wants to transfer it to XI then there is a bit of a paradox situation, because it has to choose between using an X-based or Character-based type for its interface
    -> as Binary data?
    - when using X-based data types in the interface, I have control of the character encoding, but I expect that the XML-information will probably be wrapped in base64 encoding and then the XI will receive a base64 encoded
    XML-block instead of "plain" XML.
    I did not find any reference information on how the soap interface of XI and the WAS behave when transferring X-based data, however.
    -> as Character data?
    - on the other hand when using Character-based data types (e.g. String), I have no control of the codepage being used. I have then only the choice to generate the default encoding of the application server. Maybe this encoding
    will be transformed later to a different encoding, but usually during this process the header, which declares the encoding in use will not be adapted as well.
    So if I have a unicode machine, it will generate UTF-16 - based XML. I have no other choice, if I use a character-based type for output. And this will also be stated in the header of the XML stream. If the XML stream
    leaves the system it will probably be transformed to UTF-8, but the XML-header will still state the content to be UTF-16, because the header will probably not be auto-converted together while adapting the Character
    encoding.
    Because of these issues I am quite insecure, on how to generate and wrap UTF-8 - based XML, so that I can properly hand it over to XI, ensuring that
    it stays UTF-8 and that XI can really unwrap it automatically.
    Does anyone have a tip in which type to wrap XML-based data on the ABAP stack so it will be usable in XI?
    Thank you very much for your attention and time.
    Yours
    Christian Steinert

    Something like this should work (with a little tweek I imagine)
    This would be in the 'Command on Target':
    OdiFtpGet "-HOST=<%=odiRef.getInfo("SRC_DSERV_NAME")%>" "-USER= '<%=odiRef.getInfo("SRC_USER_NAME")%>'" "-PASSWORD= <%=odiRef.getInfo("SRC_PASS")%>" "-REMOTE_DIR=<%=odiRef.getInfo("SRC_SCHEMA")%>" "-REMOTE_FILE=<%=odiRef.getTable("L", "COLL_NAME", "W")%>" "-PASSIVE_MODE=YES"
    Set the Technology of the 'Command on Source' as File, and the technology of the 'Command on Target' as ODI Tools
    Edited by: Bos on Jun 30, 2011 11:53 AM

  • Printing error  with t-code FBCJ: Can not find PDL for output device prtloc

    Hello , folks ,
    The error with my system show the details as follow :
    Cannot find PDL type for output device prtlocal
    Message no. FPRUNX113
    Diagnosis
    No PDL type has been found for the specified output device.
    System Response
    Error message
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    For more information, see SAP Note 685571.
    Our Basis can not solve the problems .
    anybody know what's wrong with it ? 
    Thanks a lot .

    other problems could be:
    C drive is full
    ADS folder under C:\Temp are write protected

  • Problem in using output type for purchase order

    Hi experts,
         I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
    1) Going to  tcode NACE->Selected  the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
    2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
    3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) . 
    4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
    5)  Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
    6) Ensured  that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
    7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
    8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
    Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
      1) Purchasing output determination :purchasing org / vendor for EDI
      2) Purchasing output determination :doc. type / purchasing org /vendor
      3) Purchasing output determination :document type
          but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
    9)  Also i  have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
    but the idoc is not generated many times when po is changed and when once it is generated it is giving error
    Please suggest solution.
    Thanks in advance
    nehavt

    In me22n in messages tab after looking into  processing log it is giving->No recipient found for message type ORDCHG in the
    ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the  status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
    error passing data to port(could not find code page for receiving system)

  • Need to configure output type for adobe form

    Hello All,
    I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
    I'm little confused, Pls I need your help.
    Thanks in advance,
    Chandra

    Hi,
    Just before few weeks we did this task.
    Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
    1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
    2. Then use tcode tcode NACE and select EF as application and click output types button on the          application tool bar. Select NEU output type and double click processing routines on left side.
    3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
    4. For form names we have two options in NACE tcode.
    One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
    This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
    If any queries please post it.

  • Reg.Output type for purchase order

    Dear Sir
    I followed your steps but not come to "List of allowed output"
    when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN  and AUFB.
    I just copy the NEU and all,I did not change anything.
    Maintain Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Ex:
    EF---> TES
    Select “TES” and double click on “Mail title and texts” and go to
    EN- New Purchase Order Print Out,
    Select “TES” again and double click on “Processing routines,
    Select “TES” again and double click on “Partner Roles
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
    Please help me sir
    Rajj

    Hi
    Go to NACE
    Select application as EF Purchase Order
    Define TES as out put type there
    Vishal...

  • Automatic configuration of NEU output types for PO Vendor and its partners

    Hi All,
    I have requirement where I need need to send IDOC to PO Vendor and its partners at the same time when PO is created and changed. I need to get NEU output types for Vendor and Partners in messages automatically. Can any one guide me how to get this functionality. Please help me with step by step process. I am new to MM.
    Thanks,
    Ravi

    To attach output type to purchase order :
    Go to NACE , Select Application EF ( Purchase Order)  and Click on Condition Records button.
    In a POP UP window double click NEU  and then select the right Key Combination and maintain right transmission medium and output devide details.

  • Reg. Output type for PO

    Dear All
    I create new one output type(TES) instead of NEU.But which is not coming when I give message for my PO.
    What are the steps.Please help me.
    Rajj

    hi
    check following steps u have followed while defining TES output type
    Maintain Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    Ex:
    EF---> TES
    Select “TES” and double click on “Mail title and texts” and go to
    EN- New Purchase Order Print Out,
    Select “TES” again and double click on “Processing routines,
    Select “TES” again and double click on “Partner Roles
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving  output type TES.
    Vishal...

  • Naive Bayes Training - CLOB as output data type for JSON string?

    Hello everyone,
    My training model outputs a large JSON string that doesn't fit into one row, so the string is split across multiple rows. Default - or only possible output data type for that matter - is varchar according to the official documentation on PAL. Is there any chance I could use CLOB for the output?
    Regards
    Henry

    The property you provided is for applying an NB model, not for building one.
    For build, you should have used Sample_NaiveBayesBuild property file.
    I ran the NB apply sample program with your property, and was able to get past the point where you have problem.
    Please double check if you really used the property you provided and if it matches to the program you wanted to use.

Maybe you are looking for

  • Can I restore my music from my ipod to a new computer?

    I got a new computer, and fouled up the process of transferring the music from my old computer to my new one.  I managed to lose a lost of files, and also lost all the ratings and playlists that I'd painstakingly built up over several years. However,

  • Is it possible to lock out  the Key Board commands in Keynote?

    Is it possible to lock out your key board actions  in Keynote? This happened all of a sudden. My keyboard has no effect on my trying to change text colors or enter characters. By using the mouse to add text the text box appears but I cannot change th

  • Learning Solution: Instructor / Tutor iView(s) not working in Portal

    Hi all . . . We just installed the Instructor/Tutor package in our sandbox portal.  I gave the role to myself so that I could see the Instruction and Tutoring tab. Yet, when I click on Work Overview to see the Instructor's Work Center iView, it throw

  • Can any one tell me how to get the Cell ID from the nokia�s mobile stations

    Hi All: Im trying to get the gsm cell information from nokia�s cell phones, but the properties "phone.cid", "phone.lai", "phone.mcc" and the "phone.mnc" not works, every time the results are null. Could any one help me? Please contact me at [email pr

  • Slow shutdown on macbook pro 2010 ssd

    My ssd macbook pro 2010 13 inch takes 20 sec for shutdown and around 25 for booting up. I have tried clean my mac, onyx etc but with no improvements. All software are updated and I am only using 90 GB out of 128 GB. All apps are closed prior shutdown