Doubt about Deploy Application

Hello Guys,
I need deploy application XX.msi,size 17Mb on 300 desktop's by SCCM 2012.
But I want know if is possible configure my limit bandwidth because my deploy can't cause slowness in my environment.
Is it possible? Is there some configuration I insert limit bandwidht or where I set limit deploy is 30 desktops at a time?
Thanks!

Hi,
There is no way ti limit so that only 30 clients install the application at the time,you could add 30 clients to the collection that you have deployed the application to and when a number of them finish you can add some more clients.
You can also limit the amount of bandwidth that BITS is allowed to use when downloading the application, it is done in client settings,
http://technet.microsoft.com/en-us/library/gg682067.aspx#BKMK_BITS and you can create a custom one for these clients. Note that the BITS setting will affect all downloads that
the SCCM clients do not only this application.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Jorgen,
Thanks your idea. I will add 30 clients at a time in collection.
Regards.

Similar Messages

General Question about deployed application

hi,
When we deploy an application to the iAS, what is the place (that is... directory) where the application files are present?
I found it is available in two places. One is c:\iplanet\ias6\ias\Apps directory, where the application is present in a folder structure. Other is c:\iplanet\ias6\ias\jar directory where the application is present as jar.
Why in two places? And if i want to make any changes where should i do it? (I made change in index.html c:\iplanet\ias6\ias\Apps directory and it was effective. Then why to have the same application in jar directory too?).
thanks in advance,
desigan

<ias_home>\ias\jar is the directory that seems to be the staging area used by iasdeploy. The ear is finally exploded to the APPS directory from where it is used

Deployment application Pre-deploy setting

HI all , i have basic questtaion about deployment application .
If I select in the deplyment types "Install for system if resource is device ; otherwise install for user" and "Wheather or not a user is logged on" and deployment collection is user and pre-deploy is checked is the program istall only
to primary device or every computer where user logon ?
thanx
Falcon

Hi,
You can define primary devices. These are typically the devices that users use on a daily basis to perform their work. When you create an affinity between a user and a device, you gain
more software deployment options. For example, if a user requires Microsoft Office Visio, you can install it on the user’s primary device by using a Windows Installer deployment. You can also use user device affinity to pre-deploy software on a user’s device
when the user is not logged in. Then, when the user logs on, the application is already installed and ready to run.
How to Manage User Device Affinity in Configuration Manager
http://technet.microsoft.com/en-us/library/gg699365.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

About deployment of the application

Hi,
I've have a question about deployment of the application in a JBoss server. The thing I'm concerned in is how it works..
These are the steps I have to perform:
1. Create an EAR file from my application;
Ok, that's enough..
The question is when I deploy this file does it get extracted in a server? And how I reach the main page?

Hi,
you create a WAR file and an EAR file and deploy it as described in the JBOSS documentation. This creates a J2EE application context with the name of the project's J2EE context (open the JDeveloper project properties and check the "J2EE Application" node. This shows you the default J2EE context used when deploying the application. You can change the string to something better if you like.
Then, after deployment you request
localhost:<port>/j2ee_context_path/initial_page.jspx
Frank

[Forum FAQ] How to deploy applications remotely

In some situations, we may need some ways to install applications remotely, here we summarize four general ways to deploy applications.
1. Using PowerShell to install
We can use the Win32_Product class to install Windows Installer packages, remotely or locally, so in this way, we can use powerShell command to invoke this function. For example, to install the NewPackage.msi package located in the network
share \\AppServ\remote on the remote computer PC01, type the following command at the Windows PowerShell prompt:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Product"}).Install(\\AppSrv\remote\NewPackage.msi)
In same method, we can use the following command to deploy .exe application:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Process"}).Create(\\AppSrv\remote\NewPackage.exe)
Note: The applications should use Windows Installer technology.
2. PsExec tool: one of sysinternals utilities
PsExec's most powerful uses include launching interactive command-prompts on remote systems and remote-enabling tools like IpConfig that otherwise do not have the ability to show information about remote systems. So, we can use this feature to install our
applications, in fact this is similar with PowerShell methods, the only difference is that PsExec is a comprehensive tool. Similarly, we can use the following command to achieve our goal:
psexec \\PC01 cmd /c "\\AppSrv\remote\NewPackage.msi" /quiet /norestart
Note: we can also use PsExec tool to install Microsoft Update file (.msu)
psexec \\PC01 -s -h -d wusa.exe "\\AppSrv\remote\NewPackage.msu" /quiet /norestart
3. Group Policy Software Installation
In domain environment, this method is very useful to deploy our software. It only supports MSI package for deployment.
We can choose assign a program to user or computer. If you assign the program to a user, it is installed when the user logs on to the computer. When the user first runs the program, the installation is completed. If you assign the program to a computer,
it is installed when the computer starts, and it is available to all users who log on to the computer. When a user first runs the program, the installation is completed.
You can get the installation information of group policy software installation in event viewer, including success or failure.
4. System Center Configuration Manger
The Microsoft System Center Configuration Manager software distribution feature provides a set of tools and resources that help you create and manage packages and advertisements used to distribute software to client resources within your enterprise. This
is a comprehensive suit for deployment.
How to Deploy Applications in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682082.aspx
Summary:
There are a lot of methods for software deployment, here just introduce some generic ways.
Here is another important point of software deployment: Some applications do not use windows installer technology.
Applications that do not use Windows Installer technology may have application-specific methods for automated deployment. For example, a .exe file may be just a wrapper, it can be anything. To determine whether there is a method for deployment automation,
check the documentation for the application or consult the application vendor's support system. In some cases, even if the application vendor did not specifically design the application for installation automation, the installer software manufacturer may have
some techniques for automation.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

In some situations, we may need some ways to install applications remotely, here we summarize four general ways to deploy applications.
1. Using PowerShell to install
We can use the Win32_Product class to install Windows Installer packages, remotely or locally, so in this way, we can use powerShell command to invoke this function. For example, to install the NewPackage.msi package located in the network
share \\AppServ\remote on the remote computer PC01, type the following command at the Windows PowerShell prompt:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Product"}).Install(\\AppSrv\remote\NewPackage.msi)
In same method, we can use the following command to deploy .exe application:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Process"}).Create(\\AppSrv\remote\NewPackage.exe)
Note: The applications should use Windows Installer technology.
2. PsExec tool: one of sysinternals utilities
PsExec's most powerful uses include launching interactive command-prompts on remote systems and remote-enabling tools like IpConfig that otherwise do not have the ability to show information about remote systems. So, we can use this feature to install our
applications, in fact this is similar with PowerShell methods, the only difference is that PsExec is a comprehensive tool. Similarly, we can use the following command to achieve our goal:
psexec \\PC01 cmd /c "\\AppSrv\remote\NewPackage.msi" /quiet /norestart
Note: we can also use PsExec tool to install Microsoft Update file (.msu)
psexec \\PC01 -s -h -d wusa.exe "\\AppSrv\remote\NewPackage.msu" /quiet /norestart
3. Group Policy Software Installation
In domain environment, this method is very useful to deploy our software. It only supports MSI package for deployment.
We can choose assign a program to user or computer. If you assign the program to a user, it is installed when the user logs on to the computer. When the user first runs the program, the installation is completed. If you assign the program to a computer,
it is installed when the computer starts, and it is available to all users who log on to the computer. When a user first runs the program, the installation is completed.
You can get the installation information of group policy software installation in event viewer, including success or failure.
4. System Center Configuration Manger
The Microsoft System Center Configuration Manager software distribution feature provides a set of tools and resources that help you create and manage packages and advertisements used to distribute software to client resources within your enterprise. This
is a comprehensive suit for deployment.
How to Deploy Applications in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682082.aspx
Summary:
There are a lot of methods for software deployment, here just introduce some generic ways.
Here is another important point of software deployment: Some applications do not use windows installer technology.
Applications that do not use Windows Installer technology may have application-specific methods for automated deployment. For example, a .exe file may be just a wrapper, it can be anything. To determine whether there is a method for deployment automation,
check the documentation for the application or consult the application vendor's support system. In some cases, even if the application vendor did not specifically design the application for installation automation, the installer software manufacturer may have
some techniques for automation.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Deployment Application To Weblogic Server Failed

Hello every body
I need your help in this problem please :
I'm using Oracle JDeveloper 11.1 in my local machine, I Installed Weblogic Server 10.3 on the server and it's works well, I made new JDBC connection in Weblogic Server and it's works well too.
I made new ADF Fusion web Application and I used the same connection that I used in Weblogic server and it's works well.
I made new Application Server Connection from my local machine and It's works well with my user account.
In my project I made new WAR deployment, Also I configured my Application properties to Bind Application to the Weblogic server Instance.
1-when I try to deploy my project to Weblogic server I get this error message :
Deploying Application...
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application test_webapp on AdminServer.: Failed to load webapp: 'test_webapp.war'.
weblogic.application.ModuleException: Failed to load webapp: 'test_webapp.war'
#### Deployment incomplete. #### Feb 15, 2009 12:18:01 PM
Deployment Failed
2-Another application was deployed before to Weblogic server, it seems running well, whereas Weblogic Server marks my deployment health as OK, but when I try to run it for test using this URL : http://serverIP:Port/Deployment Name, I get this Error : Error 403--Forbidden
What Should I do for both cases ?
Thanks a lot ...

Thanks Timo
But first I don't use any library at my project , this is last log in Weblogic Server logfile :
####<Feb 16, 2009 1:56:58 PM EET> <Warning> <DeploymentService> <D2KR2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <Osama> <> <> <1234785418343> <BEA-290008> <Deployment service servlet encountered while extracting uploaded file to directory ".\servers\AdminServer\upload\test_webapp". Exception is: "invalid distance code".>
Where D2KR2 is my Server Name
Osama is my user in Weblogic Server
test_webapp is the Application name
My problem didn't solved yet, and I'm new at JDeveloper ADF.
Where I can find clear information about deploying projects to Weblogic server.
Thank's Agin ...
Edited by: user8330337 on 15/02/2009 04:09 ص

ConcurrentModificationException while running the deployed application

Hi,
I am using JDeveloper 11.1.2.0.0 and WebLogic Server Version: 10.3.5.0 with production environment.
My application is based on Customized Dynamic Tab Shell where each task flow is loaded with its own transaction and also it is defined not to share data control.
I use a Collection Object inside TabContext class, which will be accessed and consumed (including modifications) by all dynamic tab loaded taskflow.
I use Customized FactoryClass for every BC4JDataControl to track the request and also to pass parameter to model layer AMs
When i run the application in local, i didn't get any error. But when i check the deployed application, I am getting ConcurrentModificationException frequently as javascript dialog
java.util.ConcurrentModificationException
ADF_FACES-60097: For more information, please see the server's error log for
an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #181When i check the server error log, it didn't say anything about my classes.
[2011-10-04T01:35:33.608-07:00] [MDA1-Server01] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 11d1def534ea1be0:-38985633:132c98ea02d:-8000-000000000000b88b,0] [APP: CalwinApplication] ADF_FACES-60096:Server Exception during PPR, #55[[
java.util.ConcurrentModificationException
     at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:372)
     at java.util.AbstractList$Itr.next(AbstractList.java:343)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:619)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.PageTemplateRenderer.encodeAll(PageTemplateRenderer.java:69)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:493)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:913)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1661)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:607)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:623)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer._encodeChildren(RegionRenderer.java:310)
     at oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer.encodeAll(RegionRenderer.java:186)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:493)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:913)
     at oracle.adf.view.rich.component.fragment.UIXRegion.encodeEnd(UIXRegion.java:323)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1661)
     at org.apache.myfaces.trinidad.component.UIXGroup.encodeChildren(UIXGroup.java:170)
                .....On checking further about this error code in Oracle® Fusion Middleware Error Messages Reference 11g Release 2 (11.1.2.0.0), it is given as
ADF_FACES-60097: For more information, please see the server's error log for an
entry beginning with: {0}
Cause: An exception was thrown durring a PPR request.
Action: Please look in the servers error log for more details on this error.
Level: 1
Type: ERROR
Impact: LoggingI couldn't get any hint on what may be the issue. Can anyone help on this?
Thanks in Advance.
Perumal S

I've seen this happen before if component objects are stored in managed beans (e.g. using binding="#{someBean.foo}").
Problems like this can happen if the component is stored directly on the bean as a member variable (most commonly if the bean is application-scoped, session-scoped, or pageFlow-scoped but smaller scopes can exhibit the problem too).
Usually just referencing the components from the accessors on JSF event objects during an event handlers or using one of the various component searching APIs (e.g. findComponent) can suffice in locating the components dynamically.
However, if using one of those mechanisms isn't feasible you must use the ComponentReference as the storage mechanism (and follow the caveats noted in its JavaDoc):
http://www.jarvana.com/jarvana/view/org/apache/myfaces/trinidad/trinidad-api/2.0.0-beta-1/trinidad-api-2.0.0-beta-1-javadoc.jar!/org/apache/myfaces/trinidad/util/ComponentReference.html
Hope this helps,
Matt

Resource not release when starting/stopping the deployed application

I am testing to deploy an standard web application on Weblogic 11gR1 at Windows XP. It is running and everything is working fine. But I noticed below situation which concersns about the release of resouce during stop and start deployed application by using Admin Server Console:
After the deployed application starting running in Weblogic, I go to Admin Server Console to select the deployed application at deployment section and click "stop\When work complete". It looks like that the deployed application was stopped and its state went to "Prepared". Then I start it again by click "Start\Servicing all requests". It started correctly. If I tried multiple times of "Start \ Stop" operations on this deployed application, then eventurally, I got "output memory" exception and Weblogic died. I wached the memory usage of Weblogic, when applying multiple times of 'start / stop' operation on an deployed application, the memory usage of weblogic continuese to grow and until "output memory" exception occurs.
Is it normal? What might be wrong when configuring weblogc? or somethng wrong for deployed application?
Anybody can provide any help would be great appreciated.
Thanks in advance.
Jim

Hi Mithun,
Thanks for your reply! If stopping the deployment need some time to finish, So, admin console of weblogic should disable ( grey out ) its starting button while the related deployed application is still shutting down. After the deployed application were stopped completely, then enable the starting button again to avoid the issue.
I just feel a little bit strange for the admin console of Weblogic to behavior on start / stop deployed application.
Thanks,
Zhiping

Get information about Weblogic Application Server knowing only port number.

Hi.
What kind of information about Weblogic Application Server can I get if I know only port which web application is deployed?
If it is true, how can I get it?

1, If you want a opportunity run your code at server instance started or restarted, please see:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/config_xml/StartupClass.html
2, or you can package your code in a standard web application， deploy into the server instance.
a servlet required to start you service.

Doubts about use of REPORTS_SERVERMAP with Forms11g HA

Hi,
I'm configuring a Linux 64bits Forms/Reports 11g HA environment, the point is that i have two nodes, each one with its Forms and Reports servers, let's say FormsA and ReportsA for the first node and FormsB and ReportsB for the seconde node.
i want FormsA to be able to call reports from ReportsB and FormsB to be able to call reports from ReportsA.
I've been reading about REPORT_SERVERMAP
http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_conf003.htm#autoId5
But i have some doubts about its use:
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
2. The link provided says "Using RUN_REPORT_OBJECT. If the call specifies a Reports Server cluster name instead of a Reports Server name, the REPORTS_SERVERMAP environment variable must be set in the Oracle Forms Services default.env file"
In fact i'm using RUN_REPORT_OBJECT but
what is the Reports Server cluster name ?? and where do i find that name ??
3. Is this configuration well defined:
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
4. At forms applications when using RUN_REPORT_OBJECT, can i assume that the report server name will be the cluster name specified at the REPORTS_SERVERMAP ??
5. Which files should i modify rwservlet.properties or default.env ??
Hope you can help me :)
Regards
Carlos

Hi,
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
--> In such case what could go wrong is
Suppose Run_report_object executed jobs successfully to ReportsA
But web.show_document command for getjobid failed ( as ReportsA went down by this time)
--> You will not get the output shown ( though job was successful)
If shared cache was enabled, then Even if ReportsA is down, other cluster member ( say ReportsB)
will respond back to web.show_document.
Point 2,
--> Under HA is it highly recommended to use web.show_document ( a servlet call) to execute reports. This is to help use all HA features at the HTTP , Webcache or load balancer level.
However if there is migrated code or Run_report_object is must, then the recommendations as you see in the pointed document is must.
REPORTS_SERVERMAP setting needs to be configured in rwservlet.properties file and also in default.env Forms configuration file to map the Reports Server cluster name to the Reports Server running on the mid-tier where the Load Balancer forwarded the report request.
For example FormsA, ReportsA, cluster name say rep_cluster
default.env file
REPORTS_SERVERMAP=rep_cluster:ReportsA
Where "rep_cluster" is the Reports Server cluster name and "ReportsA" is the name of the Reports Server running on the same machine as FormsA
rwservlet.properties file
<reports_servermap>rep_cluster:ReportsA</reports_servermap>
At default.env this is not a valid entry
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
what is the Reports Server cluster name ?? and where do i find that name ??
--> This is created via EM on the report server side.
Would recommend to refer following documents at the myoracle support repository
How to Setup Reports HA (High Availability - Clusters) in Reports 11g [ID 853436.1]
REP-52251 and REP-56033 Errors When Calling Reports From Forms With RUN_REPORT_OBJECT Against a Reports Cluster in 11g. [ID 1074804.1]
Thanks

Doubt about Report - Task Sequence - Deployments

Hello,
I have a doubt about this report Summary report for a task sequence deployment in Task Sequence - Deployments.
Last Friday I did deployed in 6 desktop ran this report and display my 6 desktop's all right.
Today a run this report and display no data.
Why occurred this? Anyone have idea?
I think this report have display me all data about my task sequence specific.
Thanks.

Are you sure the deployment wasn't deleted or recreated?
Query your DB and see what the NumberInstalled says. That should show you 6 were installed. You just need the Deployment ID added to this query below.
select *
from dbo.DeploymentSummary
where
OfferID = 'YOUR DEPLOYMENT ID HERE'
Best, Jacob I'm a PC.
My TS wasn't modified or recreated, but in DB display NumberInstalled = 0.
Anyone have modify this TS since last friday, I don't know the reason this happened.
I will do news deploys and see this report after if still have same issue.
Thanks your opinion.

Doubt about Substitution Rules

Hello gurus!
We have a doubt about Management Substitution Rules. We fully understand all the benefits of this feature and tried to communicate to all our personnel to make it work properly, but as we have a big staff and not everybody have the same "skills" understanding technology, we eant to have a different approach to this: we want to develop a "user friendly" interface, as a single acreen where we can emulate all the features of Substitution Rules, but we want to know if there is a control program or a Function that controls this, and the understand it fully to achieve this. Anybody knows if this is possible?
Regards IA

Hi,
If you use UWL only with one backend system, you can easily build your own application for example with web dynpro ABAP. Just use the function modules SAP_WAPI_SUBSTITUTE* to do the different operations (creating, deleting substitutions, etc.).
If you have multiple backend systems, it is a bit more complicated. You could build your own (Java WD) application by using the Substitution API. Check the docs at: http://help.sap.com/javadocs/NW04S/SPS09/uw/com/sap/netweaver/bc/uwl/IUWLSubstitutionManager.html
Both approaches work.
Regards,
Karri

Doubt about webDynpro windows

HI Experts,
I have small doubt about webdynpro windows.
1) If i have only one application in webdynpro DC , what is use of using multiple windows.
2) If i have multiple windows in a DC which has single application, how i can i navigate between windows?
3)if i have multiple applications with multiple windows, then how will i know which window belongs to which application.
4)If i have multiple windows and multiple applications, then how can we navigate between windows? It means navigation betn windows and navigation betn applications...?
Please explain me, i browsed in SDN, i found the threads but they are explaining my doubts exactly
Thanks in advance.
Regards,
Bala

Hi.
Simply the Window is part of Web Dynpros public interfaces, and are needed whenever you want to access a graphic component from outside of your web dynpro component.
Web Dynpro uses the MVC design pattern. Model View Control.
In order to reuse components, Web Dynpro exposes the View and Controller to the outside world.
Internally the View and Control in MVC is just that:
Views
Component Controller and Custom Controller.
Externally the View and Control are exposed as
Interface Controller and Interface Views. The Interface View is the external part of a Window. (When a Window is created, an associated Interface View is created).
So, to be able to actually see anything from a Web Dynpro application. The browser would access a Interface View that opens the Window with some view in it.
An other example is that you have two Web Dynpro projects, where the first one have a View with an integrated view from the second Web Dynpro. The integration would be through the Interface View again.
Internally in your Web Dynpro component, you can use the views directly (i.e. navigate between views).
Opening an external popup would generate a new browser window. In order for the new browser window to display anything it would need to access an interface view. That's why you need to create a separate Window when you want to use a popup.
Regards.
Edited by: Mikael Löwgren on Feb 15, 2008 12:58 PM

Doubt about Role and Policy

Hi everyone,
I have a doubt about role and policy,
I'm using OBIEE11.1.1.5, I try to creating role R1 by creating like BIConsumer.
then I go to policies interface,Edit 'BIConsumer' policy,
I find only one role 'BIConsumer' under grantee.
so I'd like to ask why 'R1' is not under policy 'BIConsumer' while R1 has permission like role BIConsumer ???
thanks in advance!

Application policies are sets of java permissions that are associated with a principal which is BIConsumer role in this case which grants permissions necessary to use, or to consume, content created by other users.
So when you try to create like BIConsumer, you are not modifying the existing BIConsumer principal policy( which you should never do) but instead trying to create one similar grants like it.
Usually as long as you are not dealing with BI Publisher, Financial Reporting and Real-Time Decisions application security permissions restriction, you would not have to modify any of these policies and use the default ones.
Hope this helps. Pls mark if it does.
Thanks,
SVS

Doubt about Component binding....

I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).
Please clarify this doubt...........

JNaveen wrote:
I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".This is regardless of the component binding. JSF creates a component tree and stores it in the session. With component binding you can link between the backing bean and the component without the need for UIViewRoot#findComponent().
Think your problem lies somewhere else. Use a profiler.
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).With the component binding you can get hold of the whole component from the tree in the backing bean. Useful if you want to do a bit more than only holding the component's value, with which you usually do with the value binding.

Doubt about Deploy Application

Similar Messages

Maybe you are looking for