Doubt in formating in the Worksheet
i created report in excel from java. in this Is it possible to differentiate two string in the same cell .for example
Status : Active
in this i want status in bold letters and Active in UnBold letters.it's in the same single cell.hw it can be perform
I think POI doesn't support this sort of formatting. This was true atleast when I last worked with it. Better check the latest version and find out!
Similar Messages
-
Paragraph format used in Form, but not defined in Para formats of the form.
Hi friends,
I was trying to edit a form window, which has paragraph formats of the name HN HT etc being widely used .
But when i check the paragraph format defenitions for this particular form , i dont see these being defined there.
I doubt its because of the same reason, when i try to change the editor to PC editor , the message comes "cant open PC editor,
Format HT not found" ( when i remove all HT from the ediotr , it shows that HN not found).
please help me on this .
Thanks ,
Shyam.
Moderator Message: Duplicate post locked
Edited by: Suhas Saha on Sep 6, 2011 12:48 PMHi shyamkumarc,
you need to declare the smart style than only you will get all the paragraph formats which are there in the smart style
Thanks
Surendra -
Turn off Format Painter on Worksheet Activate
Hello there
I am trying to disable Format Painter on a specific sheet. The sheet is designed to test the user's skill in basic formatting in Excel, and I don't want him to be able to simply copy the formatting from the "example" cells to the "answer"
cells.
I managed to disable copy and paste, but it seems the Format Painter is still a potential loop-hole in my test.
I've Googled for about half an hour, and the only promising aswer I could find was this code:
Private Sub Worksheet_Activate()
Dim ctl As CommandBarControl
For Each ctl In Application.CommandBars("Standard").Controls
If ctl.Caption = "&Format Painter" Then
ctl.Enabled = False
End If
Next
End Sub
(Similar code is supposed to activate the Format Painter again on sheet Deactivation.)
I've tested the code and the ctl.Enabled = False line does trigger when it is supposed to, but somehow the Format Painter remains completely useable. Can someone please help?
Best regards,
Pieka
piekaYou can choose to lock the sheet or particular cells. You can download this
EXCEL API,and after add reference to project,using the following code.
Lock cell,
Dim workbook As New Spire.Xls.Workbook()
workbook.CreateEmptySheets(1)
Dim sheet As Spire.Xls.Worksheet = workbook.Worksheets(0)
sheet.Range("A1").Text = "Locked"
sheet.Range("B1").Text = "Unlocked"
sheet.Range("A1").Style.Locked = true
sheet.Range("B1").Style.Locked = false
sheet.Protect("123", SheetProtectionType.All)
workbook.SaveToFile("Sample_Lock.xlsx", ExcelVersion.Version2013) -
I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.
I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.
-
I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..
Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media. -
Save the report in PDF format on the server: is it possible?
Hi all,
Is it possible to save the report in PDF format on the server?
In other words, in a web application:
1) the user requests a report
2) the report produced in PDF format, is saved on the server, where is the Java Reporting Component
3) the report, in PDF format, is sent to the client's user
Thanks a lotPrintOutputController.export, get the byte stream, save on server.
Sincerely,
Ted Ueda -
Formatting of Excel worksheet While using Export to Excel
Hello Experts,
I have a requirement to format the workbook according to the user needs while the user clicks "Export to Excel" in the webpage of Web template.
The major problem is with the hierarchy.. when exporting, the hierarchy nodes have triangular symbols.. is there any way to remove them??
What can i do, so that i can make changes to the default export format of the workbook, while exporting it??
Any helpful suggession will be appreciated and rewarded.
Thanks and Best Regards,
Vikas Bittera.Hi Mark,
Thank you very much for the response.. however this is not the full solution of my problem..
Now, if i execute the same query in the BEx explorer analyzzer, then even this setting does not work... it shows traingles.. wht oue intention is to use Excel grouping function, so that the user will have better navigation in hierarchy..
so is there any way to do this? we need to other formatting of the output.. is it possible that we can change the standard query ouput in excel??
Looking ahead for your response..
Thanks and Best Regards,
Vikas Bittera. -
Problem with SQL*Loader and different date formats in the same file
DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
System: AIX 5.3.0.0
Hello,
I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
...;2010-12-31;22/11/1932;...
I load this data using the following lines in the control file:
EXECUTIONDATE1 TIMESTAMP NULLIF EXECUTIONDATE1=BLANKS "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
DELDOB TIMESTAMP NULLIF DELDOB=BLANKS "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
The relevant NLS parameters:
NLS_LANGUAGE=FRENCH
NLS_DATE_FORMAT=DD/MM/RR
NLS_DATE_LANGUAGE=FRENCH
If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
How can I get both date values to load correctly?
Thanks!
SylvainThis is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(
-
Unable to load wsdl. if currently online please verify the uri and or format of the wsdl
Hi,
i have one aspx page in which i have embeded an swf object,
which calls webservice to load data,
it works fine on localhost,
but when uploaded it gives the error no 2032 stream error ,
i added the crossdomain.xml in the root project then that error was gone and found the following error,
"unable to load wsdl. if currently online please verify the uri and or format of the wsdl"
Can anybody help me with this?
Any elp or suggestion will be appriciated.
Thank You.
BhavikaI had the same error message and I believe I added the -use-network=true to the additional compiler arguments to fix the problem. The default value for this should be true.
Sorry if this doesn't help...It's just a guess. -
Problem with the number format in the graph axis with Report Generation Toolkit.
Hi!
I'm trying to use the Report Generation Toolkit to plot some graphs in Excel.
My first problem is that I don't know how to configure the number format in the Excel Set Graph Font.vi so that my numbers are correctly displayed in the graph's axis. The only given option is general (0,0) but this is not enough for me, my numbers can get really small so I need engineering notation or fraccional format.
Second: I also insert a table with the graph source data, but the numbers are not correctly displayed either: for example:
0,75 is shown as:
0,750000
but 1,25 is shown as:
1!250!000
My guess is I am making to much or wrong string to number conversions or Excel is getting it wrong but I can't find my way...
Can someone help me with this?
Thanks,
IsabelHere is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi 96 KB -
AS Above. Edited in FCPX. Excellent sound file. Using Compressor 4 to DVD Studio 4. Wanting AIFF or WAVE sound for acurate sound.
Previously DVD Studio 4 has accepted AIFF etc and delivered sound as reuired. Now, during the burn process everything other than ac3 is declined as 'video bit rate too high', but will burn if the AIFF format is replaced with ac3 (which I presume meanss the 'video bit rate too high' is referring to the sound file)
The issue with ac3 format is the huge reduction in original volume and worse, the 'auto volume levelling' that makes a nonsense of the original soundtrack - with simply aweful unwanted variations in volume Throughout the the dvd.
I have tried everything I can think of to get around this. The 'volume gain' in compressor doesn't make any difference. Exporting just AIFF and the Video to DVD 4 doesn't make any difference, it always declines anything but the aweful sound ac3 delivers.
I have customers awaiting a musci DVD, not with thei quality I can't.
Cheers
PhilThe total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels. -
How can I create a Title for the worksheet in Discoverer Plus
Dear members,
I am using discoverer 4i Plus to create workbooks. I am not finding an option to insert a title for the worksheet. In Discoverer Desktop we have a separate option to insert or edit a title. I am not sure how can we create titles in Plus.
Any suggestions.
Thanks
SandeepHi,
I am not able to login to Discoverer Desktop Using my Applications username. My Desktop Version is 4.1.37. The same username works in Discoverer 4i Plus and i can create workbook there.
I went to Tools--->Options--->Connections and checked the option connect to both standard and application EUL's and while i am logging in i checked the small box which comes in the login screen. I do not know why this happening.
I am also able to login as the database user in Desktop but not as an application user.
I want to login into desktop as an application user and create a template workbook which has title and then assign that workbook to a particular responsibility since creating title cannot be done in Plus.
I am not sure what's going wrong here because the Desktop works for database user but not for an application user. Any comments are highly appreciated.
Thanks
sandeep -
How do I set a custom time & date format in the top bar?
Hello guys,
Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
How do I set a custom time & date format in the top bar?
When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
All help appreciated!
GreetingsLanguage & Text system preferences, Formats tab, customize dates.
There are also many third party menu item utilities that can. Search Macupdate.com for some.
One search yielded iClock Pro. Although I never used it I would think it allows customization. The link I gave you is to the Macupdate download page for that app. On that same page is a Similar Software section which has other apps that can do the same thing.
One listed is iStat Menus. The primary use for iStat Menus is not for displaying date/time but it does do that. And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date. So I use it instead of the apple clock. It does have the customization features I think you are looking for. -
Can We Display a Tabular Format in the Decision Report?
Hello,
One of my current OPA integrations is replacing an Excel-based application that calculates entity values across rows and columns. In the OPA version, the rows are separated into screens, and the columns - the results - are displayed in a decision report that shows a single value per line, and is not vertically aligned. This makes the results much more difficult to view "at a glance" compared to the legacy solution. I'm wondering if there's any way to incorporate tabular formatting (mainly vertical alignment) within the decision report - does anyone know?
Thanks!
- PatrickWith version 10.3 and the BI publisher integration you can design virtually any format for the decisions you wish. When using BI publisher, a completely customized decision report is quite easy. See the OPM help topic "BI Publisher code for Oracle Policy Modeling" and/or the example that ships with 10.3 for more info. If using the web service to make determinations, you could also post process the XML for the decision report (i.e. using XSLT or code) to produce a table in XML or HTML. Customizing the "default" decision report into a tabular view would probably prove more difficult than the other options.
-
Hi how is the best way to do a " format " to the disc???
I have a Macbook Pro for 3 years now, never ever did a "format to the disck" or other kind of re-instaling apple software! Now the Mac its more slow and saying that no have memori space. I want to delete everying and re-install again ( had a TimeMachine update ).
How is the best way to do it?
ThanksI don't do J2ME, but the best way I've run across is offscreen rendering and javax.swing.Timer
If there is an equivalent in J2ME I highly recommend it.
Maybe you are looking for
-
Need a help to this but I can't find a specific community.
Hi Guys, I got some designs that I need to do a Mock-up on Responsive HTML5 (JUST MOBILE.. not desktop So I need to build something just for Phones and Tablets). I got all the screens on Photoshop. I need to get those designs and build a responsive p
-
IPhone : Scale image in a memory efficient way?
Greetings- I am trying to find the most efficient way to scale down an image captured with the camera and UIImagePickerController. As far as I can see with Allocations Instrument, any way I scale it down seems to shoot the memory footprint up 20mb (t
-
Testing server doesn't update files
As of today, changes that I make to my css files don't seem to have any effect when tested over the local server (I use MAMP). When I navigate to http://localhost in my browser, or switch to Live View in Dreamweaver, my site seems to have stayed exac
-
Officejet 6700 - Webscan on Chrome - no save button
I saw a similar issue on IE which had been solved but no resolution for Chrome... When I use Webscan there is no "save" button available after scanning as a pdf, the preview works OK but right-clicking it and choosing "Save as" does not save a valid
-
I keep getting an err=-36 error on a few songs from an albumn I just peurchased on itunes. Any suggestions on how to finish getting the songs?