Doubt in write statement  at the time of using Unicode

Hi ,
here we are working in unicode ,we are facing one problem in write statement
whenever we  activate the code we are getting the problem like ,"Literals that take up more than one line not permitted", but this report is working good in 4.7 but while executing in ecc6.0 ,we are facing the problem like this ,so how to solve this please let me know.
Thanks in advance,
sai krishna.

It is a warning message & can be ignored.. but if you want to avoid the synatx error, you have to concateante the string ie..
old code:
data w_str type string.
w_str = 'abdcdcsdcsdcsdcdcdc
                 dscsdcsdcsdcsd'.
write: / w_str.
new code.
data w_str type string.
concatenate  'abdcdcsdcsdcsdcdcdc'
                 ' dscsdcsdcsdcsd' into w_trs.
write:/  w_str.
~Suresh

Similar Messages

  • If the program has a write statement   at   the top  & the TOP-OF-PAGE

    Q]      We know that START-OF-SELECTION  is triggered by the 1st   writr statement. Now if the program has a write statement   at   the top  & the TOP-OF-PAGE too is written explicitly  which also contains write statements-----what will be the effect?

    Hi,
    i will order of events
    see first of all initialization event gets triggred and then at selection screen triggres and then it goes to start of selection and if it found any list processing statement then it goes to top-of -page event and after executing all the statements it returns back to the start of selection event
    just i will give one test case to u execute it u will know one thing
    give one write statement in the initialization event and in the start of selection of give one write statement see what happns u can find different different things just try i will expalin u the concept..
    plzz reward if it is useful...
    plzz dont forget to reward..
    if u want any concepts u can contact me on [email protected]
    plzz reward

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • I live in Nepal. I can access for the first time at the time of using itunes. There isnt option of NONE in the payment mode.Please Help Me Out !

    I live in Nepal. I can access for the first time at the time of using itunes. There isnt option of NONE in the payment mode.Please Help Me Out !

    AshimPoudel wrote:
    I have problem still. Is this payment important to create a free apple ID???
    Not sure what you are asking...
    Apple ID FAQs
    http://support.apple.com/kb/HE37

  • How to estimate the time needed for unicode conversion

    Experts:
    I am going to perform an upgrade from 46C (non-unicode) to ECC6/EHP4.
    In the action plan , it's hard to estimate the time needed for unicode conversion.
    We do not have a sandbox to benchmark that time.
    Could you please help share your experience here?
    Thanks!!

    Hi,
    usually it is very hard to estimate a proper time.
    There are some hints to get a rough feeling (SAP note 857081 and [SMP link|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000380759&_OBJECT=011000358700001279022010E] ).
    However please note that SAP highly recommends to do a Sandbox conversion - otherwise there is a high risk that the PRD conversion will take (much) longer than expected.
    Best regards,
    Nils Buerckel

  • Error at the time of using j2iun

    Hi
    At the time of using the tcode j2iun for utilisation of cenvat i am getting the erro in  fi posting 20080715 (it showing the error) my abaper told it is fiscal period posting error. i want the solution for that.  Please help
    Regards
    D.Hariprasad

    Dear Hari,
    what type of error you are getting.
    it is related to Pft. error message plz. assign the defalt Pft. center .
    Regards
    radha

  • Do I need to leave location services on all the time to use the "Find my iPhone" app?

    Do I need to leave location services on all the time to use the "Find my iPhone" app?

    The Find My IPhone app is used to find OTHER lost devices, it does nothing to make your device "findable".  To make it findable, you must turn on "Find My IPhone" in settings. And than you need location services on.  This however does not guarantee that you'll always find it if lost. A thief can set it to factory settings, even remove the sim card. Then it'll be unfindable.

  • I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

    I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

    Yes.
    The only difference is the installation method and the ownership verification. The program still is installed on and runs from your local machine. You only have to hook up to the internet every 60-90 days to verify ownership.
    From the FAQ
    Do I need to be online to access my desktop apps?
    No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
    An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
    Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode."

  • Well,Most of the time I use Firefox,but that is without making it my default browser,I want to know the benefits of making Firefox my default browser,Please do let me know.

    I want to know the benefits of making Firefox as my default browser.If I do not make IT my default browser then what will be my loss ? Most of the time I use Firefox.Please help me intime.Thank You. I am using Windows Vista,Firefox 10.0.2.

    Making Firefox the default simply tells Windows that you want to use Firefox to open anything on the internet. You are still able to access other browsers, it just uses Firefox to open stuff like links in emails, docs, etc. instead of Internet Explorer.
    It is really a personal choice, if you want to use Firefox the majority of the time, I'd set it as default, it just makes thinks easier.

  • I am connected to a time capsule both wirelessly and through ethernet...and state of the time capsule is solid green...the internet however doesn't work...The internet works fine when directly connected to my macbook pro but it won't work through the tc

    I have deleted time machine preferences...restarted the modem a bunch of times, restored time capsule to it's original settings...after I first set it up in Airport Ulitity its shows a page quickly that states there is a internet problem, but the page quickly goes away before I can read what it says exaclty and states the internet connection problem is resolved...
    However it's not resolved, I'm also having trouble doing a back up to my time capsule...I recently purchased a new macbook and retrieved/restore what was on the time capsule to the new computer...that worked fine...wireless worked fine...however when I tried to back up the new macbook...it would faii stating that there isn't enough room on the TC to do a back up...
    I didn't end up keeping the new macbook, I was just using it/trying it out while my current macbook pro was being repaired (logic board)
    Ever since I got my current macbook back from repair...my backups have failed due to their not being enough space to perform the back up...in the past the back ups would happen and old back ups would be replaced...
    I think this has to do with my current computer having a new name after the repair..."Adam's macbook pro 2" vs "Adam's macbook pro"
    The internet was working fine wirelessly through the TC a day ago, but it wasn't allowing my other laptop that was connected via ethernet access to the internet...I had a self assigned IP address error then...I don't have that problem now, but it's not transmitting internet at all...even though it's in a solid green state.
    I have no problem completely wiping out my TC including the previous back ups on it...just don't know how to go about it...I have restored it to factory settings a bunch of times and created the network from scratch...just hasn't fixed the issue
    Is there more prefences files I should delete

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • How can I search the time capsule using spotlight or time machine?

    Every time I try to use spotlight in finder, to find anything on the time capsule, spotlight automatically turns to the mac.
    While using timemachine the connection to the time machine greys out.
    How can I use these options, or different options to search the time capsule?

    I've been looking for the star wars gui, but I only ended up watching scifi movies all night.
    LOL..
    Oh well it is new year.. seems as good a use of time as any.
    Click on the time machine icon in the dock.. that opens finder inside the backup.
    http://www.dummies.com/how-to/content/using-time-machine-to-find-old-files-on-yo ur-mac.html

  • How does one set up remote access via the internet to access files stored on the Time Capsule using airport utility 6.1

    I was just wondering if anyone can provide me with instructions please on how to set up remote access via the internet to the time capsule when away from home?
    I am running OS X Mountain Lion operating system and have Airport Utility 6.1.
    Many thanks to you all for your help.

    I think the instructions should be all in BTMM with iCloud.
    Instructions are all there.
    http://support.apple.com/kb/ht3486

  • 3g on all the time but use only wifi

    I would like to know, how to setup 3g on ipad in a way that the 3g will be on all the time, (for purpose of using it as a gps locator), but use only wifi for data.
    I have 10euro prepaid card and I would like to use it for emergency, I do not want to have pushed email while I'm driving ..etc.
    How to set it up?

    Having 3G on or activated shouldn't be necessarily for GPS - some people have the 3G iPad for its GPS capability and never activate 3G on it

  • What all can I do with the time capsule using my ipad 3?

    Wirelessly?

    Basically nothing. ipad is not designed to use TC..
    You can load a file app, eg filebrowser onto the ipad and read and write files off the TC.. that is about it.

  • Issue in the PDF at the time of Using current context element

    Experts,
    For retrieving the values in the WebDypro applications, I have used the current context element. Using that current context element I have generated the PDF.
    I have faced critical issue, if the two different persons are accessing the same PDF button at a same time in the different system.
    Both of them have selected the different values in the table (different id). But in the output it displays the same results (same id) for both the persons.
    The PDF displays the correct results (different id) at different time interval for both the persons.
    We are facing this issue, only if both the persons are clicking the PDF button at the same time.
    Could you please anyone give the solution for this problem?
    Application developed using WebDynpro Java NW2004
    Kind Regards,
    Hariprasath R

    Hi,
    First u invalidate() the current context element.
    after that u put data in current context element.
    Regards,
    Sunaina Reddy T

Maybe you are looking for

  • Using oracle thin driver with to_char gives invalid column name

    select x,y,z, to_char(event_time,'YYYY-MMM-DD') from eventtable; if i execute the above query using oracle thin driver it gives me invalid column name. It works fine if i use weblogic driver. So what could be the problem ??? thanks.

  • SCSM 2012 R2: Error in DW server after moving workflows to new server

    Hi We have installed a new management server and moved to workflows to the new server, and all looks like it works ok. Then we have followed this to remove the old managment server: http://marcelzehner.ch/2012/08/01/dealing-with-multiple-management-s

  • Hyperlink in auto respond text

    When you create text in an auto respond message (in preferences, rules, etc), is there a way to link a word ( you know,make it blue ) in the text that will, when clicked, go to a specific web page? thanks bl

  • How to delete Workarea in Designer 10g R2?

    I have created so many workareas. I have exported the application systems from a Workarea and I wish to delete the Workarea permanently. Does anyone know how the Workarea could be deleted?

  • Why does he search in the user settings for the printer?

    Hi, I created a smartform and added output and control options when the form is called. I read that if I assign tddest and tdprinter, and leave user_settings blank, that SAP would not go to the user settings to see if a standard printer was declared.