I am connected to a time capsule both wirelessly and through ethernet...and state of the time capsule is solid green...the internet however doesn't work...The internet works fine when directly connected to my macbook pro but it won't work through the tc

I have deleted time machine preferences...restarted the modem a bunch of times, restored time capsule to it's original settings...after I first set it up in Airport Ulitity its shows a page quickly that states there is a internet problem, but the page quickly goes away before I can read what it says exaclty and states the internet connection problem is resolved...
However it's not resolved, I'm also having trouble doing a back up to my time capsule...I recently purchased a new macbook and retrieved/restore what was on the time capsule to the new computer...that worked fine...wireless worked fine...however when I tried to back up the new macbook...it would faii stating that there isn't enough room on the TC to do a back up...
I didn't end up keeping the new macbook, I was just using it/trying it out while my current macbook pro was being repaired (logic board)
Ever since I got my current macbook back from repair...my backups have failed due to their not being enough space to perform the back up...in the past the back ups would happen and old back ups would be replaced...
I think this has to do with my current computer having a new name after the repair..."Adam's macbook pro 2" vs "Adam's macbook pro"
The internet was working fine wirelessly through the TC a day ago, but it wasn't allowing my other laptop that was connected via ethernet access to the internet...I had a self assigned IP address error then...I don't have that problem now, but it's not transmitting internet at all...even though it's in a solid green state.
I have no problem completely wiping out my TC including the previous back ups on it...just don't know how to go about it...I have restored it to factory settings a bunch of times and created the network from scratch...just hasn't fixed the issue
Is there more prefences files I should delete

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

Similar Messages

I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

I have a new macbook pro but it won't connect to itunes. Any ideas?

I have a new Macbook Pro but it won't let me sign in to itunes. It pops up and error message saying that the itunes store is temporarily unavailable.

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work. The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything. What I copied was the entire iTunes Media folder. So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air? Whew!

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the

Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!

Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products

I purchased a Seagate 3T HD for my MacBook Pro but only Windows are listed n the bix (the Seagate site listed Mac) will it work???

I purchased a Seagate 3T HD for my MacBook Pro but only Windows are listed on the box (the Seagate site listed Mac) will it work???

Most external drives are formatted for Windows; you should be able to format it for Mac. Plug it in, open Disk utility, highlight the drive and choose the Partition tab. Do not worry about any software on the drive - you don't need it and it will be erased. In the partition tab, choose how many you want, name them, choose Mac OS Extended (Journaled) and, under the Options button, choose GUID partition scheme. Hit Apply. The drive will be erased and formatted. If that process does not work, contact Seagate and inquire about the Mac compatibility.

HT201364 I have a brand new macbook pro, but it won't let me download mavericks

I have a brand new macbook pro, but it won't let me download mavericks

You have got a Late 2013 MacBook Pro.
This MacBook uses a special OS X Mavericks version which is newer than the one available in the Mac App Store, so you cannot download OS X Mavericks from the Mac App Store now. Instead, if you need to reinstall OS X, you will have to do this through Recovery (hold Command and R keys while your computer is starting up).
You will be able to download OS X Mavericks from the Mac App Store when your Mac uses the same OS X version as all other Macs. This may happen when Apple launches OS X 10.9.2

I in stalled Keynote 5.2 on MacBook Pro but it won't read older Keynote 2.0 files. Is this expected, meaning I have to use old software only to present these files?

I in stalled Keynote 5.2 on MacBook Pro but it won't read older Keynote 2.0 files. Is this expected, meaning I have to use old software only to present these files?

I do not know, but it sure is expected- macs never back-compatible.

HT4245 my iMessage on my macbook pro mountain lion won't work.

this is a very frustrating problem
my iMessage on my macbook pro mountain lion won't work.
it keeps on saying that ive entered the wrong passcode.
i even have my firewall turned off
plz help

Ok...
So I bought my MacBook Pro second hand, and it came with no installation discs, but I got Mountain Lion and had it installed and decided to back it up to a disc in case of this scenario. I followed some instructions to make a bootable disc and used it to install a fresh copy of Mountain Lion back when I first got it.
My problem is that without the boot partition of my MacBook's hard drive it doesn't seem to want to boot the disc.
Since I didn't want to buy a disc and I don't have another MacBook or know anyone near me that does, I decided to download a hackintosh iso and use it along with my other laptop to install iPC 10.5.6....this installed successfully and my hopes were that my MacBook would be able to boot it, so I reinstalled my MacBook's hard drive and to my surprise it booted, although not normally. Since it is hackintosh it has some rewritten boot features so it's not a true OSX, but it is fully functional. Since I finally had OSX booted I figured I was in the clear and would be able to install Mountain Lion from this, but then I found out that you have to have Snow Leopard 10.6.8 or later in order to install Mountain Lion.
Now I'm stuck with a hactintosh version of Lion and still no way to get back to Mountain Lion, is there anything I can do now that I have a functional OSX installation?

I tried to download picture/video files from iPhone 5S to MacBook Pro but it won't stop importing and I don't have phone connected. I need to shut down the computer and I can't stop the import from spinning

I tried to import picture/video files from iPhone 5S to MacBook Pro Aperature. It appeared to be trying to download every picture I have ever taken even tho I checked do not import duplicates. The phone is not connected to lap top. It has been spinning for 1/2 day. I can't stop it. I can't shut down the computer. How do I stop the import and shut computer down.

Hey L. DENISE,
I recommend that you use the following article to help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I rented a movie using iTunes on my MacBook Pro, but it won't move to my first Generation Apple TV

I justed downloaded a Rented Movie from iTunes on my MacBook Pro. I did it through United Airlines e-miles to get credits. Now, when I try to move it from the Rented Movies to the On "Apple TV" box on my Apple TV box, it stays in it for no longer than 35 seconds after I click on Apply and then moves back to the "Rented Movies" box. The only thing that appears in the Apple Symbol progress box is Syncing "Apple TV" is "Copying 2 of 2: IMG_0318" and them it moves back to the "Rented Movies Box. The same message appears if I click on Sync with it still in the "Rented Movies" box.
How can I overcome this problem? I have 29 days and 23 houors to solve this problem, but would like to do it for watching NLT Monday, 21 May 2012, evening!

Mr. Churchill - First, to answer your last questions:
Yes, the movie is fully downloaded, all 3.69 GBs.
No the Apple TV has 127.5 GBs of its 144.63 GBs free.
Second, I tried turning the Time Capsule WiFi rounter and Apple TV off (for at least two or three minutes, not the usual 10 seconds recommended) and I still could not move the movie.
Third, I severed the link and set it up again re-synced all 5,103 items back and still when I move the movies to the Apple TV box and Apply it, after 35 seconds it stops the sync and moves it back the the Rented Movies box.
Though I have set my Apple TV to sync with my MacBook Pro I cannot find a way to connect it to other than shared library, but not the "not shared library" (Is this what the Rented Movies are?). Is what Fletch is talking about int the "Rental Movies not showing up on Apple TV" discussion my problem and a solution?
Fletsch
Re: Rental Movies not showing up on Apple TV
Mar 4, 2008 1:58 PM (in response to Mark_Mac)
there are three possibilities: you have not upgraded to version 2.0 or in Summary on the ATV device in iTunes, you should look whether you have it set up to only sync or otherwise disables movie syncing, or you have not paired your Mac to the ATV (on your tv, settings/computers/connect to itunes library - not shared library)
MacMini core duo, Mac OS X (10.4.8)
Or is it something else?

When I turn on my MacBook Pro .....I hear the sound as if it gonna come on but there is no picture . Why is this happening and what can I do to fix this? My MacBook Pro is a 15 inch 2011 model.

Ok earlier today I was at work on break and I usually use this time to check emails,iChat messages ,etc. when I tried to turn my MacBook Pro I hear the sound as if it' is gonna turn on....but my screen is still black mind you the battery is fully charged.....why is that and what can I do to fix this problem......I LOVE MY MACBOOK PRO and I'm upset because of the issue. Can someone please help me ? I'm suffering from MacBook Pro withdrawal :(

If you've activated FileVault, only the users that were authorized to unlock the startup volume will appear in the pre-startup authentication dialog. Once the system has started up, all users will appear in the login dialog.
To authorize more users after the volume has been encrypted, select the FileVault tab in the Security & Privacy preference pane. Click the lock icon in the lower left corner and authenticate to unlock the settings, if necessary. Click Enable Users...
You should only enable users whom you trust implicitly with all data on the system, not just their own data.

Transferred a video from phone to macbook pro but sound is not working.

I transferred a video from my phone to my macbook pro. the transfer was successful but the sound is not working on the computer, totally mute. the video is playing on quicktime player. the computer sound is on. the video was working fine on the phone and when i transferred the video, if this makes any difference or anything, the phone's media volume was on full.
I very much appreciate the help and feed back, thank you!

I have this same issue and have been struggling with it for a while. I really just need to get it into Apple Store to be fixed most likely - but avoiding the hassle and time needed to do so.
Things I've come across:
Something inside of the headphone jack is not right, such that it randomly thinks headphones or some other type of optical audio device are plugged in. you will see a red light inside the jack occasionally when it happens.
You might try doing PRAM and/or SMC reset ( http://support.apple.com/kb/HT3964 )

HT201335 my apple tv video is delayed when its mirrored with my macbook pro but he audio is fine.

When I mirror my macbook pro to my apple tv the video is greatly delayed but the audio is perfect. how can i fix this?

Clamshell and mirroring are two distinct concepts, I know. As to the lost audio, I have restarted my equipment more than a few times. It's usually one of my first options. Just don't understand why the audio stays home and the video makes it to the tv. That's with mirroring.
I really want to be able to close the lid of the MacBook and use the tv as a desktop. With mirroring, the cursor is choppy and reacts slowly. I wish to watch programming stored on my drives on the tv. I dont really need or want mirroring, but it's the only way I know of to get desktop to the tv. And mirroring still suffers audio loss. Someone in the community mentioned using and external keyboard and "clamshell" but they didn't elaborate. That's what I'm really wishing to accomplish.
Thanks, Sir Winston.

I am connected to a time capsule both wirelessly and through ethernet...and state of the time capsule is solid green...the internet however doesn't work...The internet works fine when directly connected to my macbook pro but it won't work through the tc

Similar Messages

Maybe you are looking for