Doubt in XML payload validation in PI 7.1
Dear All,
I understand that the PI message payload can be validated against a XSD/XML structure..
but i do not understand its advantage as the payload will by default be validated against our source data type..
then why do we need it to get validated against some other xml at adapter/IE level
Dear Ravi,
A very good question asked by you... Actually to tell there is not much of an advantage...
What it actually does is..
1)XML Validation allows you to check the structure of a PI message payload. The structure check is
performed using saved data types.
2)Syntax validation of the incoming message payload is done at the Advanced Adapter Engine and at
the Integration Engine against their XML Schema stored in the File System.
3)Syntax validation of outgoing message payload is done at the Integration Engine against their XML
Schema stored in the File System.
And regarding your question why do we need it ..." This feature is demanded by the customers. "
Source:https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406a97c4-748c-2a10-f2be-cb63c5b0a11f
Rgds
joel
Similar Messages
-
XML Payload Validator SAP PI 7.1
Boas
Estou com um problema em um interface, mais propriamente em um campo do mesmo que é um string (50). E este campo esta a ser enviado com 51 caracteres, e mesmo assim o PI aceita sem qualquer tipo de validação anterior, o que vai gerar um dump na maquina destino. Estive a ver e é possível usar um XML Validator, alguém me pode explicar como é que funciona ao certo. Ja estive a ler e sei que e necessário importar o XSD e depois colocar no root do PI, mas mais que isso não sei.
Obrigado
Ruben CatronaNo PI 7.1 existe a funcionalidade sim.
A validacao é baseada na definicao da sua messagem no service interface. No caso, vc tem q definir no Data Type que o tamanho maximo do campo é 50 (ou no XSD a partir do qual a interface foi criada).
Veja o item 3 aqui:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/b1/f29e7a56e18a439984a3c6630951d2/frameset.htm
E esse link:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/0bf1b3ec732d2fe10000000a11466f/frameset.htm
Abs,
Henrique. -
Hi,
I have written a document/literal style web service that takes DOM Document as input and returns a DOM Document .
In doc/lit style web services the DOM document will be opened and passed as XML payload in the request message.
I want to validate this xml payload in the wsdl.
Any ideas about how i can do this?
Karaneither, or, or download some freebee.
-
B2B-51507 - Payload Validation Error - while creating VDA -4913V3
I created a document definition under Positional Flat file for VDA-> 4913V4. I created ecs file using the Document editor and created the xsd. I used both these files in creating the Document definition. In the document definition, under identification tab, I have these values.
Identification Value -> empty
Identification Start Position -> 0
Identification End Position -> 128
And I created a Partner Agreement using this Document Definition. I created a channel to send the document to GXS Mailbox.
In the agreement if I have both Validate and Translate checked on, I am getting an error which is show in the reports->Business Message.
Error Code B2B-51507
Error Description Machine Info: (RRDV2SOA) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Payload validation error.
If I have only Translate checked on, I am not getting any error, but the message that is sent to GXS is zero bytes.
If I leave both Validate and translate unchecked, the xml is sent to GXS but not the native Format.
I took the payload from the business message and validated and it looks correct.
I am using the sample data that is already validated in the B2B Document Editor using Data Analyzer.
Can you help me on this. I am not sure what I am doing wrong. If needed I can send you the ecs, xsd, and B2B partner definition export zip file to your email address.
Here is the logfile for this error.
[2011-04-06T21:00:41.652-07:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1a33f088] [userId: <anonymous>] [ecid: 0000Iwi7c0MCcpiF_7I7S61DVcAD0051W4,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 4e45f5dff566a29f:-335a9823:12eb62ea520:-7ffd-000000000000008c] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Exit
[2011-04-06T21:00:41.653-07:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@1a33f088] [userId: <anonymous>] [ecid: 0000Iwi7c0MCcpiF_7I7S61DVcAD0051W4,0] [APP: soa-infra] [dcid: 4e45f5dff566a29f:-335a9823:12eb62ea520:-7ffd-000000000000008c] Error -: B2B-51507: Payload validation error.: Error -: B2B-51507: Payload validation error.[[
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:835)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
... 11 more
Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-51507: Payload validation error.: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:835)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1326)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:837)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1411)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.pff.PFFDocumentPlugin.processOutgoingDocument(PFFDocumentPlugin.java:798)
... 11 more
Thank you
Krishna.I selected the option "Save guideline before exporting". I am guessing it is failing on the main element of the xml message because of some namespace issue. I am generating the XML using xsl transformationin BPEL and sending the XML payload to B2B Service.
Is there a way to know what part of the XML is erroring duing the validation on the server. The error message is not helpful even I turned on Trace 32 level.
Any ideas?
Thank you
Krishna -
XML Payload does not have namespace and prefix.
Hello
I have created a consumer business service which will be called from JDEdwards EOne, pulls data from database and send it to Fusion Middleware.
SO, I have created proxy using JAX-WS option. And suggested in oracle doc, I created proxy outside OMW and then copied it to my project. XML payload is getting generated without namespace and prefix. After some research, I modified package-info.java. Now, I am able to send the payload and if test it locally from Jdeveloper and take xml output using marshaller I can see it has namespace and prefix as well. BUt, when I run this from server it does not have namespace and prefix.
Please help.
Thanks
TKHi Naresh,
The "rejectedMessage" property is for 10G, I am not 100% sure about its implementation in 11G.
In 10G the faulted XML file moves to this location "Oracle_Home\bpel\domains\domain_name\jca\project_directory\rejectedMessages".
This property is used to move the files which are not valid XML or which are not schema compliant. For DB polling I don't think this property is used.
-Yatan -
Unable to transform EDI document to XML payload in Oracle B2B inbound op
Hi,
In our current project we would be implementing Oracle B2B.So I am doing simple POC on Oracle B2B inbound operation for a EDI document for a project requirement.Facing issue if Transformation option selected in Oracle B2B console. Would really appreciate if you guys give me some pointer..
Below is short desacription of POC:
1) Created ECS file for Purchase Order(EDI_X12 Standard, 850, Version : 4010) in Spec Builder 6.6.0
2) Created corresponding XSD and dummy test EDI data file(.dat) in Spec Builder 6.6.0
3) In Oracle B2B Console, created Document Type and Document Definition
4) Created 2 Trading Partners : Our Organisation(Host) and MyPartner(Remote)
5) My Partner is Sender and Our Organisation is Receiver
6) Linked Document Type to both Trading Partners
7) Created a Listening Channel
8) Protocol of Listening Channel is Generic File
9) Mentioned Folder Path and File Type : %From PARTY%_%TO PARTY%_%DOCUMENT TYPE NAME_%DOCUMENT REVISION%.dat
10) Agrrement validated and deployed
11)Checked option Transformation for Agreement
12) In SOA Composite created a simple Asynchronous BPEL process
13) BPEL process using a B2B Adapter is subscribed to Document Type(Purchase Order) operatioon Receive and Mode Default
14) Using a simple Assiign activity to map payload
15) BPEL then inoke a File Adapter service to write sme XML payload(picked from B2B fatre EDI transformed to XML) to a file
Issue Faced:
1) B2B could make oput Sender and Receiver Trading Partners
2) B2B could make out the Agrrement
3) B2B is picking up EDI file
4) If Agreemnet has Transformation option selected, then B2B is givinng below Error:
[oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILzvC2E0Va_xLp2iW1EzqZ_0000pg,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
5) It is unable to transfer EDI payload to XML
6) Checked payload in Wire Message : still showing EDI payload
7) Due to this BPEL is facing issue since it is expecting XML payload
8) In BPEL it is givimng Error: Index Out Of bound.. I guess may be due to EDI payload
9) If transformation option unchecked in Agreement in B2B console then B2B working good but BPEl failing
Options Tried:
1) I Exported Repository,then purged design time data and Reimported and restarted Server and tested..not working
2) I also created a Parser Scehma for Blank EDI document(that option I found in Spec Builder 6.6.0==>New Document-->Parser Schema(Blank EDI Document) and then placed that Parser Schema file(ECS file) in folder :
C:\Oracle\Middleware\Weblogic\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\config\schema
and added an entry in XERegistry.xml
<Item Name="SchemaFile">${XERoot}/config/schema/Spec2</Item>
but not working..
3) Checked namespace in XSd and WSDl for BPEL,they are correct
Getting no clue how to resolve..Need help...
Thank you...Log File :(Weblogic JDK pointing to 32 bit)
[2012-01-01T01:32:01.818+05:30] [AdminServer] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILhj4XE0Va_xLp2iW1EzqZ_00002J,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc;[[
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
at com.edifecs.xengine.xeobjects.XEHelper.createN2X(Unknown Source)
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1112)
java.lang.UnsatisfiedLinkError: com.edifecs.xengine.xeobjects.XEHelper.createN2XNative()Lcom/edifecs/xengine/xeobjects/XEDataProc;
at com.edifecs.xengine.xeobjects.XEHelper.createN2XNative(Native Method)
at com.edifecs.xengine.xeobjects.XEHelper.createN2X(Unknown Source)
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1112)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2348)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1533)
[2012-01-01T01:32:01.834+05:30] [AdminServer] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@182461f] [userId: <anonymous>] [ecid: 0000JILhj4XE0Va_xLp2iW1EzqZ_00002J,0] [APP: soa-infra] [dcid: 162dbcacafdb4641:19e705e4:13495b34174:-7fd3-0000000000000070] java.lang.IndexOutOfBoundsException: Index: 0, Size: 0[[
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:2746)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1533)
[2012-01-01T01:32:01.846+05:30]
]] -
Adapter Engine XML Schema Validation Error Surpression
We recently developed a number of web services that are called by 3rd parties outside our network. The web service request once made is picked up by a Web Dispatcher which then forwards the request to the de-central adapter. Both of these components reside within within a DMZ.
We have, as an additional security measure made use of the new Adapter Engine XML Schema validation available with PI 7.1, to ensure that the payload of incomming messages is checked to ensure that it is a known structure.
Now here is my problem, we recently had these services penetration tested by a 3rd party to ensure that they were secure and whilst the report was very good showing no major weaknesses they did pickup on a couple of items including that the fact that if the XSD to be used during payload message validation cannot be found an 'ADAPTER.JAVA_EXCEPTION' is returned to the web service consumer that highlights the path details of where the XSD should be (but could not be found).
This was viewed as useful to an attacker for a number of reasons:
1. Feedback in SQL injection attempts via verbatim DB error messages greatly improves attacker efficiency
2. Path information is useful to the attacker for OS fingerprinting, directory traversal attempts
3. Other miscellaneous stack trace information is useful to an attacker to understand how the application works
Is there anyway this can be surpressed so that the adapter does not show this information in the returned error message - see example message below ?
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema MaintenanceOrderByIDQuery_sync.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiSAPGlobal20~Global\MaintenanceOrderByIDQuery_sync.xsd (validation\schema)
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
at sun.reflect.GeneratedMethodAccessor497.invoke(Unknown Source)
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema Schema1.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiEA-APPLSEGlobal\Schema1.xsd (validation\schema)
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)Hi,
We are having the same problem, so you are not alone.
I had an extensive call with Azure premium support and we where able to determine that:
- Nothing is missing or in the wrong place in my exported .xml file.
- Any changes to the VNET's using the web gui interface of https://manage.windowsazure.com is not possible when you have dns servers and use an gateway
- You can download the .xml configuration file of the network and make manual changes to it, then import it again , to add/remove dns servers and or subnet's.
I am currently waiting for an solution, i have let them lower the urgency from A to B (because i can make changes trough xml) and responded to the next support contact (saying he will continue with the issue) that the problems seems to be with azure and
he should speak with the previous person helping me. I have not heard from Azure support since.
SR Number:115021812414226
Open on:02/18/2015 09:28
> There are networks with and without gateways created and the issue is happening on all the networks.
> We are unable to add or remove the DNS servers. (by web gui)
> Also not able to add or remove any subnets. (by web gui)
> Every time the error message is same but the DNS server name is different. (from another subnet then the one we are changing)
> Created CRI- 3405931, but they said it will need WATS team.
> Confirmed with WATS engineer as well and moving case to WATS.
> Cx agreed to lower the severity of the case as they are able to make changes through the network configuration file.
> But they still want to get this resolved soon.
> Agreed and dropped off, reducing severity to B 24/7.
I hope microsoft is going to resolve this soon, as i do not want to edit my xml for little things like adding a subnet all the time. I have requested an status update in the issue.
Should anyone have more information on this, please share it here. -
B2B-51507- Payload validation error - 11.1.1.7 Latest Version
Anuj/Nitesh (B2B Gurus)
I am facing a problem when Posting the message from SOA to B2b (XML->EDI) using the B2b Adapter.
Flow is : Ebusiness->PLSQL->AQ->BPEL->B2B. Once the message is posted to B2b It is throwing the following Error.
But I am passing all the mandatory and Optional Parameters.
Tried the Following Threads, But No luck. I am passing all the Mandatory Parameters.
How to map Internal-Properties in XSLT.
Oracle B2B Payload Validation exception
Scenario - 1 (Success No Errors , Output Does not Contain PO Details)
Disabled the Validate flag in the Partner Agreement for the B2B Document.
Verified the B2b Wired Message, Output got generated but without the PO information I am passing from BPEL.
Scenario - 2 (Error )
Enabled the Validate flag in the Partner Agreement for the B2B Document. The system is generating an error and throwing list of errors.
Error
Id
C064016C14103689486000005559CD14
Message Id
C064016C14103688C7F000005559CD0F
Refer To Message
Refer To Message
Sender Type
Name
Sender Value
ABC
Receiver Type
Name
Receiver Value
TEST123
Sender
ABC
Receiver
TEST123
Agreement Id
EDI_850_tpa_Lt7763342564515893374
Agreement
XXX_EDI_X12_4010_850_Outbound
Document Type
850
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
OUTBOUND
State
MSG_ERROR
Acknowledgement Mode
NONE
Response Mode
NONE
Send Time Stamp
9/9/2013 10:48
Receive Time Stamp
9/9/2013 10:48
Document Retry Interval(Channel)
0
Document Remaining Retry(Channel)
0
Document Retry Interval(Agreement)
0
Document Remaining Retry(Agreement)
0
Native Message Size
Translated Message Size
5471
Business Action Name
Business Transaction Name
Xpath Name1
XPathName1
Xpath Value1
Xpath Expression1
Xpath Name2
XPathName2
Xpath Value2
Xpath Expression2
Xpath Name3
XPathName3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
CorrelationFromXPathName
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
CorrelationToXPathName
Correlation To XPath Value
Correlation To XPath Expression
Wire Message
Wire Message
Application Message
Application Message
Payload Storage
Payload Storage
Attachment
Attachment
Label
soa_b2b_ - Thu Sep 05 11:51:44 CDT 2013 - 4
Collaboration Id
C064016C14103688E1A000005559CD13
Collaboration Name
Collaboration Version
Business Action Name
Exchange Protocol Name
Generic File
Exchange Protocol Version
1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code
B2B-51507
Error Description
Description: Payload validation error.
Error Level
ERROR_LEVEL_COLLABORATION
Error Severity
ERROR
Error Text
Error Brief : Error reporting limit exceeded. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A functional group code mismatch was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A transaction ID mismatch was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. An X12 syntax error occurred. An X12 syntax error occurred. Validator error - Extra data was encountered. Validator error - Extra data was encountered. A data element with 'Mandatory' status is missing. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered. Validator error - Extra data was encountered.
Error Brief :^M
Error reporting limit exceeded.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
A data element with 'Mandatory' status is missing.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Validator error - Extra data was encountered.^M
Description: Payload validation error., null, null, null, null, C064016C140EF31BFCA000005559CC
A4, null, null, 1258, B2B-51507, null, null, null, null, null, 2013-09-05 12:35:49.092, null, ^M
Error :^M
Analysis halted after 101 error(s) (Limit for Transaction is 100). Large numbers of errors usually indicate that the same error is repeatedly encountered in multiple segments or transactions. Fix the repeating error and resubmit the test to obtain further results.^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 1{br}{tab}Characters: 210 through 212^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 2{br}{tab}Characters: 247 through 257^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 3{br}{tab}Characters: 292 through 294^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 4{br}{tab}Characters: 329 through 339^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 5{br}{tab}Characters: 374 through 376^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 6{br}{tab}Characters: 411 through 426^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 7{br}{tab}Characters: 463 through 465^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 8{br}{tab}Characters: 502 through 517^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 9{br}{tab}Characters: 552 through 558^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 10{br}{tab}Characters: 593 through 597^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 11{br}{tab}Characters: 632 through 633^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 12{br}{tab}Characters: 668 through 673^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 13{br}{tab}Characters: 708 through 717^M
Extra Element was found in the data file as part of Segment ISA. Segment ISA is defined in the guideline at position N/A.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Count: 14{br}{tab}Characters: 752 through 753^M
Thanks
Rao.Issue is resolved by doing the Following Steps.
1. Open the ECS file in the Document Editor, Exclude the ISA, GS segments in the ECS file. Save the File and Upload the Document and Redeploy the Agreement.
2. Export the XSD and refer it in the BPEL process and do the transformation.
Thanks
Nethi. -
Payload validation Error - Outbound flow
Hi,
I am trying to create an outbound flow to send a X12,4010,810 document to a trading partner.
Got the error - Payload Validation error.
Payload is as below
<?xml version = '1.0' encoding = 'UTF-8'?><Transaction-810 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="X12" Version="V4010" CreatedDate="2007-04-10T17:16:24" CreatedBy="ECXEngine_837" GUID="{12345678-1234-1234-1234-123456789012}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00401</Lookup><Lookup Name="InterchangeReceiverID">MarketInc</Lookup><Lookup Name="InterchangeReceiverQual">ZZ</Lookup><Lookup Name="InterchangeSenderID">OracleServices</Lookup><Lookup Name="InterchangeSenderQual">ZZ</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x7e</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">Authorizat</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property><Property Name="InterchangeControlVersion">00401</Property><Property Name="InterchangeDate">140313</Property><Property Name="InterchangeReceiverID">MarketInc</Property><Property Name="InterchangeReceiverQual">ZZ</Property><Property Name="InterchangeSecurityInfo">Security I</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">OracleServices</Property><Property Name="InterchangeSenderQual">ZZ</Property><Property Name="InterchangeTime">1727</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ST><Element-143>IN</Element-143><Element-329>0001</Element-329></Segment-ST><Segment-BIG><Element-373>20140313</Element-373><Element-76>I</Element-76></Segment-BIG><Segment-TDS><Element-610>2</Element-610></Segment-TDS><Segment-SE><Element-96>4</Element-96><Element-329>0001</Element-329></Segment-SE></Transaction-810>
Can someone suggest what is the problem with this payload.More detail --
Below is the message that is displayed in Oracle B2B Reports -> Business Message
Id
7F000001144BE0AB3A100000231A6860
Message Id
11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc
Refer To Message
Refer To Message
Sender Type
Name
Sender Value
OracleServices
Receiver Type
Name
Receiver Value
MarketInc
Sender
OracleServices
Receiver
MarketInc
Agreement Id
OS_MI_X12_4010_810_OutboundInvoiceAgr
Agreement
OS_MI_X12_4010_810_OutboundInvoiceAgr
Document Type
IN
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
OUTBOUND
State
MSG_ERROR
Acknowledgement Mode
NONE
Response Mode
NONE
Send Time Stamp
Mar 13, 2014 7:42 PM
Receive Time Stamp
Mar 13, 2014 7:42 PM
Document Retry Interval(Channel)
0
Document Remaining Retry(Channel)
0
Document Retry Interval(Agreement)
0
Document Remaining Retry(Agreement)
0
Native Message Size
Translated Message Size
2344
Business Action Name
Business Transaction Name
Xpath Name1
XPathName1
Xpath Value1
Xpath Expression1
Xpath Name2
XPathName2
Xpath Value2
Xpath Expression2
Xpath Name3
XPathName3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
CorrelationFromXPathName
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
CorrelationToXPathName
Correlation To XPath Value
Correlation To XPath Expression
Wire Message
Wire Message
Application Message
Application Message
Payload Storage
Payload Storage
Attachment
Attachment
Label
soa_b2b_ - Thu Mar 17 08:30:33 CDT 2014 - 8
Collaboration Id
7F000001144BE0AB37E00000231A6850
Collaboration Name
Collaboration Version
Business Action Name
Exchange Protocol Name
Generic File
Exchange Protocol Version
1.0
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code
B2B-51507
Error Description
Machine Info: (XXXX) Description: Payload validation error.
Error Level
ERROR_LEVEL_COLLABORATION
Error Severity
ERROR
Error Text
Error Brief : XEngine error.
Application Message :
Id7F000001144BE0AB22400000231A6820Sender Id TypeSender ValueOracleServicesReceiver Id TypeReceiver ValueMarketIncDocument TypeINDocument Definition810_DefDocument Protocol NameEDI_X12Document Protocol Version4010Refer To Application Message IdRefer To Application Message IdApp Conversation IdApp Message property{fabric.enterpriseId=-1, b2b.documentProtocolVersion=4010, b2b.documentDefinitionName=810_Def, b2b.messageId=11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc, MESH_METRICS=null, b2b.messageType=1, tracking.parentReferenceId=mediator:954F1AF0AB1111E3BF8A5F99BC4D6B4E:954F6910AB1111E3BF8A5F99BC4D6B4E:oneway, tracking.compositeInstanceId=20012, tracking.ecid=11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfc, b2b.toTradingPartnerId=MarketInc, b2b.fromTradingPartnerId=OracleServices, tracking.compositeInstanceCreatedTime=Thu Mar 13 19:42:55 CDT 2014, tracking.conversationId=snbwNIP3idSWrxOB_9mfQZizjgj_IKJyb-EozcpIyP4., tracking.parentComponentInstanceId=mediator:954F1AF0AB1111E3BF8A5F99BC4D6B4E, b2b.documentTypeName=IN}DirectionOUTBOUNDStateMSG_COMPLETEError CodeError TextError DescriptionCreatedMar 13, 2014 7:42 PMModifiedMar 13, 2014 7:42 PMMessage Size2344PayloadPayloadBusiness MessageBusiness MessageRetry Interval0Reattempt CountRemaining Retry0ECID11d1def534ea1be0:-7e1384fb:144bd539c55:-8000-0000000000007dfcComposite Instance Id20012Parent Composite Instance Idmediator:954F1AF0AB1111E3BF8A5F99BC4D6B4EConversation IdsnbwNIP3idSWrxOB_9mfQZizjgj_IKJyb-EozcpIyP4.Domain NamedefaultComposite NameOSToMIOutboundInvoiceProjectComposite Version1.0Reference NameB2BOSToMarketIncOutboundUrl
Payload Storage :
<?xml version = '1.0' encoding = 'UTF-8'?><Transaction-810 xmlns="http://www.edifecs.com/xdata/200" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="X12" Version="V4010" CreatedDate="2007-04-10T17:16:24" CreatedBy="ECXEngine_837" GUID="{12345678-1234-1234-1234-123456789012}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00401</Lookup><Lookup Name="InterchangeReceiverID">MarketInc</Lookup><Lookup Name="InterchangeReceiverQual">ZZ</Lookup><Lookup Name="InterchangeSenderID">OracleServices</Lookup><Lookup Name="InterchangeSenderQual">ZZ</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x7e</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">Authorizat</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property><Property Name="InterchangeControlVersion">00401</Property><Property Name="InterchangeDate">140313</Property><Property Name="InterchangeReceiverID">MarketInc</Property><Property Name="InterchangeReceiverQual">ZZ</Property><Property Name="InterchangeSecurityInfo">Security I</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">OracleServices</Property><Property Name="InterchangeSenderQual">ZZ</Property><Property Name="InterchangeTime">1727</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ST><Element-143>IN</Element-143><Element-329>0001</Element-329></Segment-ST><Segment-BIG><Element-373>20140313</Element-373><Element-76>I</Element-76></Segment-BIG><Segment-TDS><Element-610>2</Element-610></Segment-TDS><Segment-SE><Element-96>4</Element-96><Element-329>0001</Element-329></Segment-SE></Transaction-810>
I have set the following b2b headers in SOA before sending it to B2B outbound
Constant: 4010_810_Def Property: b2b.documentDefinitionName
Constant: 4010 Property: b2b.documentProtocolVersion
Constant: OracleServices Property: b2b.fromTradingPartnerId
Constant: MarketInc Property: b2b.toTradingPartnerId
Constant: 1 Property: b2b.messageType
Constant: IN Property: b2b.documentTypeName ( I defined my docuemnt with name 'IN')
Property: tracking.ecid Property: b2b.messageId -
B2B-51507 Payload validation error
Can someone tell me a what point in the b2b inbound process MDN errors are sent.
I assumed (I know shouldn't assume anything in this game) that with translate and validate on an agreement that an MDN would be sent if translate or validation fails, but this does not seem to be the case. I am using 11G.
JohnI selected the option "Save guideline before exporting". I am guessing it is failing on the main element of the xml message because of some namespace issue. I am generating the XML using xsl transformationin BPEL and sending the XML payload to B2B Service.
Is there a way to know what part of the XML is erroring duing the validation on the server. The error message is not helpful even I turned on Trace 32 level.
Any ideas?
Thank you
Krishna -
Oracle B2B Payload Validation exception
Hi,
I'm trying to input EDI and get XML as output, the EDI file gets picked up, a note, these files are all generated in the Document Editor, it's the X12 4010, 850 example. It picks up my EDI and if Translate is turned off, it validates against the ECS file and dumps the EDI file into the output partner's folder. If I turn translate on though, I get a validation error, I did tick save before generating the XSD, no validation errors in document editor. Please advise.... also note that I am doing this on the SOA VM as supplied on the Oracle website.
Id 7F00000113F80756FB800000A2DAF570
Message Id 1
Refer To Message Refer To Message
Sender Type Name
Sender Value MyCompany
Receiver Type Name
Receiver Value TheirCompany
Sender MyCompany
Receiver TheirCompany
Agreement Id New Agreement_0624_0749
Agreement New Agreement_0624_0749
Document Type 850
Document Protocol EDI_X12
Document Version 4010
Message Type REQ
Direction OUTBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode NONE
Send Time Stamp 06/26/2013 05:29:06 AM
Receive Time Stamp 06/26/2013 05:29:06 AM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement) 0
Document Remaining Retry(Agreement) 0
Native Message Size
Translated Message Size 4260
Business Action Name
Business Transaction Name
Xpath Name1 XPathName1
Xpath Value1
Xpath Expression1
Xpath Name2 XPathName2
Xpath Value2
Xpath Expression2
Xpath Name3 XPathName3
Xpath Value3
Xpath Expression3
Correlation From XPath Name CorrelationFromXPathName
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name CorrelationToXPathName
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label soa_b2b_ - Wed Jun 26 01:15:31 PDT 2013 - 2
Collaboration Id 7F00000113F80756AE600000A2DAF560
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name Generic File
Exchange Protocol Version 1.0
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-51507
Error Description Machine Info: (soabpm-vm) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Error Brief : XML Parser error.
<Jun 26, 2013 4:09:26 AM PDT> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2754)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1622)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:1090)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1539)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:801)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3788)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2754)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1622)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:1090)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1539)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:801)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3788)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
<Jun 26, 2013 5:29:07 AM PDT> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2754)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1622)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:1090)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1539)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:801)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3788)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-51507: Payload validation error.
at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2754)
at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1622)
at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:1090)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1539)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:801)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3788)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>Issue is resolved by doing the Following Steps.
1. Open the ECS file in the Document Editor, Exclude the ISA, GS segments in the ECS file. Save the File and Upload the Document and Redeploy the Agreement.
2. Export the XSD and refer it in the BPEL process and do the transformation.
Thanks
Nethi. -
In PI how do I convert the XML payload (input) to a text file and send out
I am extracting data from SAP and sending thru XI / PI to a file (non-sap system).
On the receiving end, I need the file to be a text file, with one row for each "FTZ_Row concatenated_data" tag in the input. It needs to be just a plain text file with no XML tags.
Currently the file gets one record which matches exactly to the XML payload below.
I want it to create a file that looks like this :
CONCATENATED DATA 1
CONCATENATED DATA 2
012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12
here is the payload going thru XI
<?xml version="1.0" encoding="utf-8" ?>
- <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
<FTZ_Row concatenated_data="CONCATENATED DATA 1" />
<FTZ_Row concatenated_data="CONCATENATED DATA 2" />
<FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
</n0:FTZ_Concatenated_Row>
thanks
jaythanks for the input but I am still having issues - I get an empty file when I use the content conversion option.
My payload coming into XI is :
<?xml version="1.0" encoding="utf-8" ?>
- <n0:FTZ_Concatenated_Row xmlns:n0="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" xmlns:prx="urn:sap.com:proxy:FI0:/1SAI/TAS0C0412CDBC3E782D0219:700:2008/06/25">
<FTZ_Row concatenated_data="CONCATENATED DATA 1" />
<FTZ_Row concatenated_data="CONCATENATED DATA 2" />
<FTZ_Row concatenated_data="012345678912345678MAKTX-TEST LB 123123123123 01/02/2009 Z001WCHA9876543210.12" />
</n0:FTZ_Concatenated_Row>
Here is the layout of my data type - I am using the same for input & output
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone" targetNamespace="http://intel.com/xi/INTEL_PROCUREMENT/ForeignTradeZone">
<xsd:complexType name="FTZ_Concatenated_Row">
<xsd:sequence>
<xsd:element name="FTZ_Row" maxOccurs="unbounded">
<xsd:complexType>
<xsd:attribute name="concatenated_data" type="xsd:string" />
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
I mapped these items : FTZ_Concatenated_Row & FTZ_Row & concatenated_data
I set up my content convesion with :
recordset structure FTZ_Row
FTZ_Row.fieldSeparator #
FTZ_Row.endSeparator 'nl'
I am not sure why the following row looks like this ??
<FTZ_Row concatenated_data="CONCATENATED DATA 1" />
I thought FTZ_Row would be one tag and "concatenated_data" would be another one.
any help would be appreciated.
I have read many entries/blogs/etc in SDN but and tried many different setups, but nothing is working.
thanks -
"Error while parsing SOAP XML payload: no element found" received when invoking Web Service
Running PB 12.1 Build 7000. Using Easysoap. Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service". This error does not appear to be coming from the application code. Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;"). Not sure where these are coming from. When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter". Not sure where or what temp_xml_letter resides??? The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited. Need to get this resolved...please.
This is the result of the search. Notice the extraneous characters ("""):
dar1main.pbl(d_as400_mq_xml)
darlettr.pbl(d_email_xml)
---------- Search: Searching Target darwin for 'temp_xml' (9:52:41 AM)
---------- 2 Matches Found On "temp_xml":
dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
darlettr.pbl(d_email_xml).d_email_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
---------- Done 2 Matches Found On "temp_xml":
---------- Finished Searching Target darwin for 'temp_xml' (9:52:41 AM)Maybe "extraneous" is an incorrect term. Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the """? How do I find which parser is being utilized and how to control it?
<<<
If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
>>> -
SSL/TLS security certificate data match with XML Payload in SAP PI
Hi,
We are working on a solution where we would want to use SSL/TLS or WS Security with client server mutual authentication using client server certificates.
But, once the sender is authenticated using the certificates, can the XML payload be matched for the correctness with the certificate information? Is this available to PI integration engine at any time? Like Sender A autheticated as A using certificates, must be stopped if his XML payload is saying that he is sender B (which is most unlikely if we trust the senders but did not want to leave a loophole).
Any ideas here?
Thanks and Regards,
VijayHi Wolfgang,
Cross-posting is discouraged and against the forum rules, because it is misused and makes a mess of the search due to distributed discussions and answers.
I will move it to the PI forum and add a watch on it as it is security forum related.
Unfortunately, the forum software does not have the option to "mirror" threads.
Cheers,
Julius
Edited by: Julius Bussche on Sep 14, 2009 9:50 PM -
Reading XML payload from text file
Hello,
I have a text file with XML payload in it. The text file has some header information and then the XML payload. How do I read only the XML payload for processing in PI?
the structure of the text file is something like this..
Header Information
Payload
Sample:
#Datetime: 20140318-09:28:50.129
#MessageID: sample123
#Sender: TEST
#SenderParty: TEST
#ReceiverService:
#ReceiverParty: Test
#Interface: Test123
#InterfaceNamespace: http://test.com
<?xml version="1.0" encoding="UTF-8"?>
<Sample ><Header>......
Please advise.
Thank you.
Larry.package com.learning.utils;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.Reader;
import com.sap.aii.mapping.api.AbstractTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.TransformationInput;
import com.sap.aii.mapping.api.TransformationOutput;
public class FetchPayload extends AbstractTransformation {
String strData = null;
@Override
public void transform(TransformationInput arg0, TransformationOutput arg1)
throws StreamTransformationException {
// TODO Auto-generated method stub
getTrace().addInfo("File Reading started ");
String strData = convertStreamToString(arg0.getInputPayload()
.getInputStream());
getTrace().addInfo("File Reading successfully completed ");
try {
getTrace().addInfo("Generating XML started");
strData.substring(strData.indexOf("<?xml"), strData.length());
arg1.getOutputPayload().getOutputStream().write(
strData.getBytes("UTF-8"));
getTrace().addInfo("Generating XML started");
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public String convertStreamToString(InputStream in) {
StringBuffer sb = new StringBuffer();
try {
InputStreamReader isr = new InputStreamReader(in);
Reader reader = new BufferedReader(isr);
int ch;
while ((ch = in.read()) > -1) {
sb.append((char) ch);
reader.close();
} catch (Exception exception) {
return sb.toString();
and u can get the xml as a resultant which u can use as input for next message mapping.
thanks and regards,
Praveen T
Maybe you are looking for
-
I am unable to share files satisfactorily over my home network between Mac and Windows
Please advise. I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB. The iMac also has a virtual PC in it using VMWare.
-
Change country - same Apple ID
There are four things that I do not understand about the problems faced when changing countries (France to the UK in my case) with the same Apple ID. 1. I understand from this site and others that I am obliged to repurchase my apps. Why? - when I mov
-
Question about using for-loop to generate array from DAQmx. Thanks!
I have a laser system with a frequency of 1kHz, I am using this 1kHz signal to trigger the DAQmx and get the data from a photodetector, e.g. I will get 1000 data points during 1 second from DAQmx, but I need to separate this 1000 data points into the
-
Problems with password including non-ASCII characters
I am a German language user with a German keyboard but an English OS as main language. Therefore my passwords (simple user and admin) includes non-ASCII characters used in German, French and Spanish language, which increases security. This works fine
-
How to define object type in plsql
I create a type... CREATE OR REPLACE TYPE t_Archive_Data_Obj AS OBJECT (Archive_Name VARCHAR2(40), Archive_Data CLOB); I create a type in plsql..... TYPE tt_Archive_Data IS TABLE OF t_Archive_Data_Obj; Can I, instead of creating the object type as a