Down Payment Clearing Account Vs Down Payment Interim Account
Hi Experts
What is the use of Down Payment Interim Account & Down Payment Clearing Account??
Difference b/w Down Payment Clearing Account Down Payment Interim Account ??
regards
anand
Hi Anand,
You may check: Re: Down Payment Interim Account In SAP 8.8
Thanks,
Gordon
Similar Messages
-
Dear All,
My Probelm is with Down Payment clearing while MIRO Entry.
Actually after Posting of MIRO , Down Payment is not getting clearing. Checked in FBL1N. Allentrie are in OPen Status.
I am Describing my scenario in detail and attached file with all documents created.
We have SAP ECC 6.0 EHP5.
We have activated LOG_MMFI_P2P business function.
Prepared Purchase Order by giving information of Down Payment.
Created Down Payment document thru Tcode ME2DP.
Prepared MIGO.
Prepared MIRO by selecting "Down Payment clearing" option and gave Payment amount also.
Posted MIRO Document.
Now my probelm is, after Posting MIRO Document, system should clear Down Payment Document and Vendor Invoice Document.
But when i checked in FBL1N, all documents are in "OPEN" status. i.e with Red Mark. Actuall it should get cleared and there should be cleared status with Green Mark.
Why system is not clearing Document. Is there any Configuration need to check or any SAP notes need to apply.
Pl check my attached file where i have given all documents generated at each stage.
Regards
SwatiThanks for reply.
I have followed same procedure what you have given link.
Everything is OK except clearing document.
You must have seen my attached file. I have completed whole procedure successfully.
But after posting MIRO, Down payment document and MIRO Document not getting cleared.
Checked in FBL1N, Payment document and MIRO documents are in Open Mode.
After MIRO Posting , Both documents should gets cleared i.e it should be in green status.
But it is in RED Status i.e Open Status.
Request to check my attached file and if you can give some solution.
Regards -
Error -Account 'Down-payments clearing account' could not be found for area
When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
DeepakHI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
(Transaction AO90) in Asset Accounting Customizing. The same applies
for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni -
Down Payment Interim Account In SAP 8.8
Dear All,
Please let me know the use of Down Payment Interim Account under sales and purchase tab in gl account determination in SAP 8.8. I have tried some transactions but the same is not getting affected. Is it applicable for India Localization?
Regards
KapilHi Kapil,
It is applicable for India Localization. And when you are going to do Incoming payment on base of "A/R Down Payment Request" then your "Down Payment Interim Account" will hit. In payment Dr effect goes to this GL and when you will link "A/R Down Payment Request" in "AR Invoice" then "Down Payment Interim Account" will nullify with CR effect.
Thanks,
Sachin -
Down payment clearing while accounting invoice itself
I came to know that, down payment clearing for the vendor is possible while accounting the invoice itself. Probably this function is available for SAP recent release of EHP.
Can anybody have an idea, please reply.
This function needs in MIRO
Edited by: BSR on Nov 8, 2009 11:27 PMHi,
At the time of entering the invoice from MIRO/FB60, system gives a pop-up for downpayment clearing. If you go in the help, the following thing is mentioned in the part Procedure.
Procedure
Check whether a transfer posting or a clearing of special G/L transactions (for example down payments) is necessary after you have posted the present document.
Here SAP has clearly mentioned that we can do the clearing after posting of this document.
Regards,
Amit
Edited by: amit kulkarni on Nov 13, 2009 2:53 PM -
Setting up Down Payment Clearing Account & Down Payment Offset Acct
Hi
I wonder if someone could perhaps guide me to a possible solution on the above querie. I am trying to post a Down Payment invoice within SAP Bus One 2007A but get the following error: GL Account code is missing (1) [message 131-46].
I have spoken to our support who have suggested the course of action but the problem I have is I need to know which codes I should use to set these up?
Any feedback would be greatly appreciated.
Thanks
S4P US3Rdear,
map the down payment clearing account in G/L account determination -sales tab-map Down payment clearing account(Liabilitty Account). similary for purchase(Asset account)
Hope this will help you.
Regards,
Neetu -
Dear expert,
What is exactly the main function of Down payment interim account in AP Down Payment Request? if there's any problem if i do not use this account for down payment transaction? As we know that Down Payment interim account is located on BP master Data on TAB accounting.
Thanks,
Please advice
Felix SetiawanHi Felix,
Previous to SBO 8.8 you cannot make any payment in Down payment request, now it is possible using the Interim accout for DPR the JE is created in the Interim account and balance with the invoice later.
Regards.
Rakesh N -
Vendor Down Payment Clearing: F-54 or F-44
Hi
I have made a down payment (with Spl. GL indicator) to a vendor, using F-48. Then I book an invoice using FB60. I kept the two amounts same and ignored WT to keep things simple.
Now i want to clear the down payment against the invoice. I use F-54. The clearing transaction is getting posted. However, the Invoice is lying open (credit entry) along with the Clearing document (debit entry). On the other hand the down payment document (debit) is getting cleared with the Clearing document (credit entry). This means I have two open line items and two cleared line items. I can clear the two open items again using F-44.
I have two questions:
1. What is the use of F-54 here since I have to use F-44 eventually?
2. While doing F-54, Posting Key for the debit line item is 26 : Payment Difference. This is could not understand.
Can anyone please help me out on this?
Thanks in advance
AnindaDear Aninda ,
I will explain you with following example.
Recon account(Vendor)---3000000
Advance to Vendor----
4005000
Exp a/c----
7575100
Bank a/c----
5000100
1. Advance to Vendor (spl gl -A)(F-48)
Vendor a/c (SPL-A)( GL- 4005000) DR 1000
T0 Bank a/c (GL-5000100) 1000
2. Invoice posting
Expenditure a/c ( GL-7575100) Dr 1000
To Vendor Account(GL-3000000) 1000
3. Clear Vendor Down Payment (F-54)
Vendor a/c (GL-3000000) DR 1000 (Posting key-26)
To Vendor a/c (SPL-A)( GL- 4005000) 1000
It means Credited spl GL-A has converted from advance to Normal open item. Amount has been transferred from Advance to Vendor GL to Normal Recon account.By this way Advance account shows Nil Balance with debit(F-48) and Credit (F-54)
The remaining 2 line items i.e., Credit (F-43) and Debit (F-54) shows as open items. In the next step we need to knock off those line items by manual clearing or automatic clearing.
4. Normal Clearing (F-44)
It will be posted without line items.
I hope i am able to help you out to understand process -
Withholding tax calculation at down payment clearing F-54
Hi,
Can any one reply the solution
When I am posting down payment to vendor, Basic TDS, Surcharge, Ecess on TDS and Ecess on Surcharge calculated.
Invoice is half of the down payment and TDS and Ecess on TDS calculated properly.
but when i am trying to clearing the down payment against invoice thru F-54, TDS and Ecess on TDS reversed and surcharge and Ecess on Surcharge is also reversed on proportionate basis.
It should not be reversed and client wants which is TDS is raised at Invoice it should be reversed. but we are getting more than that.
Plz help me
saiHi,
I think, what system doing is fine,
Let me explain with the accounting entries,
1. Down Payment
Debit Vendor SPL GL a/c 1000
Credit Bank a/c 945
Credit TDS Payable (all taxes) 55
2. Invoice Verification
Debit GR/IR or Expenses a/c 2000
Credit Vendor a/c 1890
Credit TDS Payable (all taxes) 110
3. Down Payment clearing
Debit Vendor a/c 945
Debit TDS Payable a/c 55
Credit Vendor SPL GL a/c 1000
4. Payment (Final)
Debit Vendor a/c 945
Credit Bank 945
5. TDS Payment
Debit TDS Payable 110
Credit Bank a /c 110.
Hope the above scheme of enteries would be helping you to understand this flow.
Saravanan.A -
Down Payment clearing at the time of Goods Receipt
Dear All,
We have activated the setting "Configure Automatic clearing of Down Payments". We are entering down payment in PO and while processing Goods Receipt system is generating automatic down payment clearing document. The issue is the document posting with GR/IR line items are not updating in the FM report FMRP_RFFMEP1AX. The Goods receipt line item is picking the account assignments like Fund center etc are updated based on PO account assignments because we are referring PO while doing down payment. The invoice also created with GR/IR line item and these line items are also updated in FMRP_RFFMEP1AX report. So the line items against GR/IR are part of consumption of budget. The consumption amount does not contain GR/IR line item while doing goods receipt but invoice GR/IR line is part of consumption of budget. As a result, the GR/IR line item is not nullifying the consumption of budget and is adding to the consumption in addition to the expense line item in goods receipt. So its consuming budget twice.
The issue is GR/IR line item while doing goods receipt is not part of consumption of budget even though the GR/IR line item created in the Goods receipt document. At the same time the GR/IR line item in invoice line item is part of consumption of budget. Please let me know the reason why the GR/IR line item in Goods receipt is not updating in the report.
Regards,
SreeHi,
500000*9 is GR and 51*0020205 is IR
GR/IR Commitment item- Find in the atttachment
OF29-Find in the attachment.
Thanks. -
Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4)
Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun RaiHi,
I just re activated that module function and process this practise in the similar way SAP has guided in its library which i can tell you in the brief. I suppose that way will work for you.
Posting of Down Payment Clearings and Down Payments in Purchase order
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create ->Vendor/Supplying Plant Known (ME21N).
a) In the item details, choose the Invoice tab page. In the Down Payment Category field, choose the Mandatory Down Payment or Voluntary Down Payment setting.
Confirm your entry.
b) Enter an amount in the Down Payment Amount field, or a percentage in the Down Payment % field.
c) Enter a due date in the DP Date field.
d) Save your entries.
2. On the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Reporting ->Down-Payment Monitoring for PO.
3. In the Purch.Doc. field, enter the purchase order number of the purchase order you just created, and enter the appropriate due date interval.
Choose Execute.
4. Select the purchase order you created in the list and choose Create Down Payment Request.
The Down Payment Based on Purchase Orders screen appears.
5. In the group box Execution, choose either Down Payment or Down Payment Request and then choose Continue.
Depending, either the Down Payment Request screen or the Down Payment screen appears.
6. Change the proposed amount to be paid in the Down Payment Amount field and choose Continue.
7. on the subsequent screens (similar to F-47 / F-48), enter the required data and post the document.
Posting of Down Payment Clearings in Logistics Invoice Verification
Preparation for this process:
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create -> Vendor/Supplying Plant Known (ME21N).
2. Use the Financial Accounting transactions (such as F-48) to create down payments for this purchase order.
3. Post a goods receipt with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Inventory Management -> Goods Movement -> Goods Movement (MIGO).
Step to follow for Execution
1. Post an invoice with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Document Entry --> Enter Invoice (MIRO).
2. Check the invoice items and correct them if necessary.
3. Choose the Down Payment Clearing pushbutton.
4. In the Amount Entered column, enter all the amounts you want to use to clear the displayed down payments.
Save your entries.
5. Post the invoice.
6. Display the invoice document. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Further Processing --> Display Invoice Document (MIR4).
i Think the way all the process mention here will help to process your requirement becuase this worked for me and i follow the same way. One think which i like to share with you is i assigned the advance payment at document header level.
Regards
Arun -
ME2DP & Down Payment Clearing LIV
Dear All,
I am facing three issues while creating and clearing down payment through ME2DP and MIRO.
1- While clearing down payment in MIRO, system is not clearing FI down payment document automatically. At the time of posting,, system generate two documents, one is Invoice and other is Down Payment.
2- After posting Invoice in MIRO with Down Payment clearing button, Status Red is activated in ME2DP which was green after creating down payment.
3- After executing all the entries from Procure to Payment, there is still Down Payment request outstanding in Purchase Order History.
Waiting for reply!
Regards
AJHi Abdul,
The purpose of using ME2DP is you can enter down payment data in purchase orders at header and item level.
You can use the down payment clearing function to clear down payments that you have posted with reference to a purchase order directly in logistics invoice verification (without going to the relevant financial accounting transactions).
If you perform down payment clearing in logistics invoice verification, when you enter an incoming invoice for a purchase order, the system proposes all down payments that have been posted with reference to the purchase order and that are not yet completely cleared, for down payment clearing. The system posts the down payment clearing document together with the invoice document.
By using ME2DP you can avoid making the down payment clearing in financial accounting as it will get cleared while posting MIRO.
Also, refer this note 1637282
Hope you will get some idea.
Regards
Shashi -
Very urgent, vendor down payment clearing - ka doc type
hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jayaHI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA -
Withholding tax issue while doing Down payment Clearing - Help needed
Hi,
1. I have posted vendor downpayment for 5000--> TDS was deducted here
Bank Credit = 4500
Vendor Debit =5000
TDS Credit =500
2. I have posted vendor invoice for 5000 --> TDS was calculated
Material Debit = 5000
Vendor Credit =4500
TDS Credit =500
3. Now i have transfer the down payment amount in F-54 (As per the above entry how much do i need to trasfer in this F-54 transaction???)
Note: How much amount do i need to transfer as per the above scenario in F-54? Kindly advise me
4. For testing i have transferred 5000 down payment for the invoice 5000. But while doing F-44,system is not allowing me with differance amount. In F-44,system is not showing any withholding tax details. Kindly help me on this..
Thanks
KBDear
TDS should have been deducted either at the time of Invoice posting (MIRO) or at the time of Advance Payment (F-48). So you need to remove TDS code while doing invoice or at the time of making advance payment in F-48. If this is ensured there will not be any problem in clearing.
When inovoice is posted debit will be to GR/IR Account and not to Material Account.
Regards -
Hello,
in my business workflow I manage billing plans with down payments. I would like to know what is the right procedure, if there is one, to manage the following process:
- I have a billing plan for 1000 u20AC: a down payment request for 200 u20AC and a subsequent invoice for the total amount of 1000 u20AC;
- down-payment request is created, released in SD and the payment is cleared in FI, with transaction F-29;
- after that I create the final invoice for 1000 u20AC with the clearing of the down payment for 200 u20AC, resulting in a total amount to be paid of 800 u20AC; then I release into accounting the final invoice;
Now, what if I want to cancel the down-payment request? Is there a standard defined procedure to manage this case? Or is it a not expected behaviour, and for that reason a case that should not take place?
Thanks in advance for your support.
Best regards,
AndreaHi,
If the down payment has been paid and if you want to cancel it,then it can be done by canceling the payment.
For this we have to know the clearing document number.
Goto the T.Code "FBL5n".Here you can get the clearing document.
Goto the T.Code "FBRA" and reset the cleared item.
Give the reason and reset it.
Now that down payment will appear in open item in "FBL5N" T.Code.
It can be canceled by using the T.Code "VF11".
Regards,
Krishna.
Maybe you are looking for
-
hee guys how do u delete a creditcard from your apple id? in the summer a friend of mine connected his own creditcard details to my apple id now i want to disconnect that again but i have no idea how? i just want my own apple id without a creditcard
-
How I can copy a video from my pc to iPhone?
I have a video on my pc in mp4 format. How can I get this to my iPhone 4? When I try to add it to my library, nothing happens. I also tried to convert it to mov, but it don´t help. Has someone an idea?
-
I would like to get suggestion for the following scenario: I am trying to create a XML file from SAP. This XML need to be wrapped inside SOAP. SOAP comprises of ENVELOPE, HEADER and BODY. I am able to achieve all the above with no issues. Finally the
-
T-code based iviews in HTML format
Hi, Please do let me know how to dispaly the t-code based iviews in HTML format through portal.Actually we need to dispaly some ABAP reports through portal in SRM.Should the reports be first converted to HTML format. Also,we need to create the PO fie
-
Just installed ios8.1 and added credit cards to passbook for Apple Pay and got verification codes entered and accepted. Is there suppose to be a separate icon for the Apple Pay function or do you just go to the Passbook to pay at a vendor? Thanks