Download BLOB column giving page cannot be displayed

I have a table with a blob column on a page. The record gets saved fine and I can open the blob up in a report using:
DOWNLOAD:REPORT_SCHEDULER_JOB_OUTPUT:REPORT_OUTPUT:PK_ID::MIMETYPE:FILENAME:::attachment:[Open]
For some reson it doesn't work on a form page. The BLOB column is set to 'File Browse'. When I click on the 'Download' link (next to the file browse button), I get page cannot be displayed. Is there soemthing else I need to do?
Edited by: bobmagan on Jul 8, 2009 4:57 AM

Bob,
You'll need to add the process. Just set the condition to Never.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Similar Messages

JSF 1.1 integration with shale-tiles-1.0.4 giving page cannot be displayed

I am trying to get shale-tiles-1.0.4 work with JSF 1.1
I am getting the page can not be displayed error.
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the 10.21.31.170:8988 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
These are the steps I have followed
I have included shale-core-1.0.4.jar and shale-tiles-1.0.4.jar in /WEB-INF/lib
I have included the following entry in web.xml
<servlet>
<servlet-name>Tiles Servlet</servlet-name>
<servlet-class>org.apache.tiles.servlets.TilesServlet;/servlet-class>
<init-param>
<param-name>definitions-config</param-name>
<param-value>/WEB-INF/tiles-defs.xml;/param-value>
</init-param>
<load-on-startup>3</load-on-startup>
</servlet>
<context-param>
<param-name>definitions-config</param-name>
<param-value>/WEB-INF/tiles-defs.xml;/param-value>
</context-param>
<listener>
<listener-class>
org.apache.tiles.listener.TilesListener
</listener-class>
</listener>
My tiles-defs.xml:
<tiles-definitions>
<definition name="/siteMainLayout" path="/tiles/layout.jsp";>
<put name="header" value="/tiles/header.jsp";/>
<put name="menu" value="/tiles/menu.jsp";/>
<put name="content" value=""/>
</definition>
<definition name="/systemLogon" extends="/siteMainLayout">
<put name="content" type="template" value="/welcome.jsp";/>
</definition>
<definition name="/systemChangePwd" extends="/siteMainLayout">
<put name="content" type="template" value="/application/changePassword.jsp";/>
</definition>
<definition name="/systemMain" extends="/siteMainLayout">
<put name="content" type="template" value="/application/mainPage.jsp";/>
</definition>
<definition name="/systemFailue" extends="/siteMainLayout">
<put name="content" type="template" value="/failue.jsp";/>
</definition>
<definition name="/systemMain" extends="/siteMainLayout">
<put name="content" type="template" value="/application/mainPage.jsp";/>
</definition>
<definition name="/systemCancel" extends="/siteMainLayout">
<put name="content" type="template" value="/application/Misc.jsp";/>
</definition>
</tiles-definitions>
My layout.jsp:
<%@ taglib uri="http://jakarta.apache.org/struts/tags-tiles" prefix="tiles"%>
<h:panelGrid columns="2">
<f:facet name="header">
<f:subview id="header">
<tiles:insert name="header" flush="false"/>
</f:subview>
</f:facet>
<f:subview id="menu">
<tiles:insert name="menu" flush="false"/>
</f:subview>
<f:subview id="content">
<tiles:insert name="content" flush="false"/>
</f:subview>
</h:panelGrid>
My faces-config.xml:
<faces-config xmlns="http://java.sun.com/JSF/Configuration">
<managed-bean>
<managed-bean-name>backing_Welcome</managed-bean-name>
<managed-bean-class>state.mn.mdh.mrc.login.Welcome;/managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>

</managed-bean>
<application>
<view-handler>
org.apache.shale.tiles.TilesViewHandler
</view-handler>
</application>
<navigation-rule>
<from-view-id>/systemLogon.jsp;/from-view-id>
<navigation-case>
<from-outcome>ChangePassword</from-outcome>
<to-view-id>/systemChangePwd</to-view-id>
<redirect/>
</navigation-case>
<navigation-case>
<from-outcome>LoginSuccess</from-outcome>
<to-view-id>/systemMain</to-view-id>
<redirect/>
</navigation-case>
<navigation-case>
<from-outcome>Others</from-outcome>
<to-view-id>/systemCancel</to-view-id>
<redirect/>
</navigation-case>
<navigation-case>
<from-outcome>Failure</from-outcome>
<to-view-id>/systemFailue</to-view-id>
<redirect/>
</navigation-case>
</navigation-rule>
My systemLogon.jsp:
<%@ taglib uri="http://jakarta.apache.org/struts/tags-tiles" prefix="tiles"%>
<html>
<f:view>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>System Logon</title>
</head>
<body>
<f:subview id="content">
<h:form>
<tiles:insert name="content" flush="false">
</tiles:insert>
</h:form>
</f:subview>
</body>
</f:view>
</html>
The url I am trying is http://10.21.31.170:8988/Test-ViewController-context-root/faces/systemLogon.jsp
Please assist in what I am missing.
Thanks,
Ambika

Hi
I do not see any error messages on the application server log except the server initialized message( I have included that at the end)
But when I run the application in Firefox browser it gives me this error,
Error instantiating web-application
Error loading listener 'org.apache.tiles.listener.TilesListener', class not found
When I removed the <listener> entry from web.xml and get the error,
Error instantiating web-application
Error instantiate servlet classes
The message in Jdeveloper is:
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config>
C:\jdevstudio10133\jdk\bin\javaw.exe -client -classpath C:\jdevstudio10133\j2ee\home\oc4j.jar;C:\jdevstudio10133\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Could not canonicalize '"C:\Program Files\Sybase\Adaptive Server Anywhere 6.0\win32"' (The filename, directory name, or volume label syntax is incorrect). From system property java.library.path.
Jun 13, 2008 10:18:21 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { location = system-jazn-data.xml, provider.type = XML, realm.default = jazn.com }
Jun 13, 2008 10:18:21 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { provider.type = XML }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { provider.type = XML }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { location = TestWithShaleTiles-jazn-data.xml, provider.type = XML, realm.default = jazn.com }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { location = system-jazn-data.xml, deployment.url = file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/system-application.xml, provider.type = XML, realm.default = jazn.com }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/system-application.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/system-application.xml]
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig fileExists
FINE: JAAS: Verify file=C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\jazn.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig getDefaultJAZNConfigFilePath
FINE: JAAS: Configuration file=C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\jazn.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig getJAZNProperties
FINE: JAAS: Configuration file=C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\jazn.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { idm.token.type = HTTP_COOKIE, custom.sso.key.alias = ssoSymmetricKey, idm.token.asserter.class = oracle.security.jazn.sso.SSOCookieTokenAsserter, realm.default = jazn.com, custom.sso.url.login = /jsso/SSOLogin, provider.type = XML, custom.sso.url.logout = /jsso/SSOLogout, idm.token.collector.class = oracle.security.jazn.sso.SSOCookieTokenCollector, location = ./system-jazn-data.xml, idm.authentication.name = JavaSSO, idm.token.collector.cookie.1 = ORA_OC4J_SSO }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { idm.token.type = HTTP_COOKIE, custom.sso.key.alias = ssoSymmetricKey, idm.token.asserter.class = oracle.security.jazn.sso.SSOCookieTokenAsserter, realm.default = jazn.com, deployment.url = file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/jazn.xml, custom.sso.url.login = /jsso/SSOLogin, provider.type = XML, custom.sso.url.logout = /jsso/SSOLogout, idm.token.collector.class = oracle.security.jazn.sso.SSOCookieTokenCollector, location = ./system-jazn-data.xml, idm.authentication.name = JavaSSO, idm.token.collector.cookie.1 = ORA_OC4J_SSO }
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/jazn.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:22 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/jazn.xml]
Jun 13, 2008 10:18:22 AM oracle.security.jazn.spi.xml.XMLJAZNProvider getJAZNDataXMLDoc
FINE: JAAS-XML: url=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/system-jazn-data.xml fname=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/system-jazn-data.xml file=C:\jdevstudio10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\system-jazn-data.xml
Jun 13, 2008 10:18:22 AM oracle.security.jazn.spi.xml.XMLRealmUser init
FINE: JAZN-XML: XMLRealmUser.init: user(anonymous) is deactivated.
Jun 13, 2008 10:18:22 AM oracle.security.jazn.spi.xml.XMLJACCRepository init
FINE: JACC: jaccRepo.init - JACCRepository already initialized. repo=[XMLJACCRepository isValid=true
     jaznConfig=[JAZNConfig file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/jazn.xml]
     jaccPolicyMap.keySet=[]
     jaccPolicyMap.values=[]] node=oracle.xml.parser.v2.XMLElement@170984c
Jun 13, 2008 10:18:22 AM oracle.security.jazn.spi.xml.XMLUserManager getAdminUser
FINE: JAZN-XML: UserManager.getAdminUser: admin.user=oc4jadmin
Jun 13, 2008 10:18:22 AM oracle.security.jazn.oc4j.RealmUserManager getAdminUser
FINE: JAZN-OC4J: RealmUserManager.getAdminUser()=RealmUser: oc4jadmin
Jun 13, 2008 10:18:23 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Jun 13, 2008 10:18:23 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Jun 13, 2008 10:18:23 AM oracle.oc4j.security.SSLMessages logGetSecureSocket
FINE: getSecureSocket(address=/0.0.0.0, port=24043, backlog=30)
Jun 13, 2008 10:18:23 AM oracle.oc4j.security.SSLMessages logGetSecureSocket
FINE: getSecureSocket(address=/0.0.0.0, port=24043, backlog=30)
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { deployment.url = file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml, provider.type = XML }
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml]
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { deployment.url = file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/application-deployments/datatags/, provider.type = XML }
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/application-deployments/datatags/
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/application-deployments/datatags/]
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { location = TestWithShaleTiles-jazn-data.xml, deployment.url = file:/C:/jdevstudio10133/jdev/mywork/Test_Tiles/Test_with_shale_tiles/TestWithShaleTiles-oc4j-app.xml, provider.type = XML, realm.default = jazn.com }
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/jdev/mywork/Test_Tiles/Test_with_shale_tiles/TestWithShaleTiles-oc4j-app.xml
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:25 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/jdev/mywork/Test_Tiles/Test_with_shale_tiles/TestWithShaleTiles-oc4j-app.xml]
Jun 13, 2008 10:18:25 AM oracle.security.jazn.spi.xml.XMLJAZNProvider getJAZNDataXMLDoc
FINE: JAAS-XML: url=file:/C:/jdevstudio10133/jdev/mywork/Test_Tiles/Test_with_shale_tiles/TestWithShaleTiles-jazn-data.xml fname=file:/C:/jdevstudio10133/jdev/mywork/Test_Tiles/Test_with_shale_tiles/TestWithShaleTiles-jazn-data.xml file=C:\jdevstudio10133\jdev\mywork\Test_Tiles\Test_with_shale_tiles\TestWithShaleTiles-jazn-data.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.util.Misc findOracleHome
FINE: JAAS: ORACLE_HOME=C:\jdevstudio10133
Jun 13, 2008 10:18:26 AM oracle.security.jazn.util.Misc fileExists
FINE: JAAS: Verify file=C:\jdevstudio10133\j2ee\home\config\jazn.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.util.Misc getJ2eeHomeJAZNConfigFilePath
FINE: JAAS: Bootstrap jazn.xml @C:\jdevstudio10133\j2ee\home\config\jazn.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig <init>
FINE: JAAS: Configuration file=C:\jdevstudio10133\j2ee\home\config\jazn.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig getJAZNProperties
FINE: JAAS: Configuration file=C:\jdevstudio10133\j2ee\home\config\jazn.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig parseJAZNConfig
FINE: JAAS: Configuration properties: { idm.token.type = HTTP_COOKIE, custom.sso.key.alias = ssoSymmetricKey, idm.token.asserter.class = oracle.security.jazn.sso.SSOCookieTokenAsserter, realm.default = jazn.com, custom.sso.url.login = /jsso/SSOLogin, provider.type = XML, custom.sso.url.logout = /jsso/SSOLogout, idm.token.collector.class = oracle.security.jazn.sso.SSOCookieTokenCollector, location = ./system-jazn-data.xml, idm.authentication.name = JavaSSO, idm.token.collector.cookie.1 = ORA_OC4J_SSO }
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: Configuration properties: { idm.token.type = HTTP_COOKIE, custom.sso.key.alias = ssoSymmetricKey, idm.token.asserter.class = oracle.security.jazn.sso.SSOCookieTokenAsserter, realm.default = jazn.com, deployment.url = file:/C:/jdevstudio10133/j2ee/home/config/jazn.xml, custom.sso.url.login = /jsso/SSOLogin, provider.type = XML, custom.sso.url.logout = /jsso/SSOLogout, idm.token.collector.class = oracle.security.jazn.sso.SSOCookieTokenCollector, location = ./system-jazn-data.xml, idm.authentication.name = JavaSSO, idm.token.collector.cookie.1 = ORA_OC4J_SSO }
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): deployment URL=file:/C:/jdevstudio10133/j2ee/home/config/jazn.xml
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): classpath=null
Jun 13, 2008 10:18:26 AM oracle.security.jazn.JAZNConfig init
FINE: JAAS: JAZNConfig.init(): this=[JAZNConfig file:/C:/jdevstudio10133/j2ee/home/config/jazn.xml]
Jun 13, 2008 10:18:26 AM oracle.security.jazn.util.Misc initJ2eeHomeJAZNConfig
FINE: JAAS: default jazn.xml @ C:\jdevstudio10133\j2ee\home\config\jazn.xml : [JAZNConfig file:/C:/jdevstudio10133/j2ee/home/config/jazn.xml]
Jun 13, 2008 10:18:26 AM oracle.security.jazn.util.Misc getIASPropertiesFilePath
FINE: JAAS: XML Provider
Jun 13, 2008 10:18:27 AM oracle.security.jazn.util.Misc getIASPropertiesFilePath
FINE: JAAS: XML Provider
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 9375 ms.
Target URL -- http://10.21.31.170:8988/Test-ViewController-context-root/faces/systemLogon.jsp
08/06/13 10:18:28 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
Jun 13, 2008 10:18:29 AM oracle.security.jazn.util.Misc getIASPropertiesFilePath
FINE: JAAS: XML Provider
Thanks for your help,
Ambika

UWL giving "Page Cannot be Displayed" when accessed through Internet

Dear all,
We have exposed our portal to Internet and are currently testing the functionality.
All applications are working fine except UWL and Identity Management. UWL is working fine if I'm not using the Webdynpro UI for display.
Later we checked. Only the Webdynpro based applications are having problem when accessing through Internet.
What can be the reason for this? Please help. We are stuck up because of this.
Best Regards,
Aparnna
Edited by: Aparnna Prasad on Aug 13, 2008 2:48 PM

Dear Aparna,
   Please check the following things
   1. Enter the Hosts enteries of R/3 and EP server.
   2. Try to ping the r/3 & EP server outside your network.
Regards
Ponnusamy

"Page cannot be displayed" error when attempting to download large dataset.

In the following code, can anybody please tell me at what point the data actually starts to get transferred and the popup "download file" box appears? I'm thinking that the dialog box should appear on the first outputstream.write and start transferring data. However, I think it's not transferring the data until the while loop has finished! That's bad because this is a real long process and I eventually get "Page cannot be displayed" error. On a smaller dataset (shorter while loop) everything seems to work correctly. Is there some sort of a web server configuration that tells it to write out the data ONLY if outputstream closes? I really need it to write out the data as it's coming in. Code is below and thanks in advance.
response.setHeader("Expires", "0");
response.setHeader("Content-disposition","inline;filename=Download.csv");
response.setContentType("application/x-msdownload");
outputStream = response.getOutputStream();
bufferInBytes = this.getData();
while (bufferInBytes != null)
outputStream.write(bufferInBytes, 0, bufferInBytes.length);
outputStream.flush();
bufferInBytes = this.getData();
outputStream.close();

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

Cannot download adobe pg..error "this page cannot be displayed" --web address is somehow wrong

company adobe endst cannot be printed....keep getting "this page cannot be displayed"
trouble shooting show connection problem ..with no details
we have reloaded adobe reader....still cannot print adobe page...kick out for address?

I cannot understand a word of what you are writing; can you explain that a little bit more clearly?

This page cannot be displayed - web connectivity problem

Just purchased an HP laptop with Windows 8 and IE 10.
I am connecting to my wireless connection because I can login and use Yahoo messenger, but cannot access any websites. When open IE, get the error: This page cannot be displayed.
There is an option to Fix Connection Issues - tried this and get the following results:
Problem with wireless adaptor or access point (not fixed)
Your computer appears to be correctly configured, but the device or resource (www.msn.com) is not responding.
Searched Google and there was a suggestion to flush the dns using command: ipconfig \flushdns. Did this, rebooted and then the home website does come up (www.msn.com). However, if I click any link on the site, I then get back to the same 'This page cannot be displayed' message.
Anyone else having this same issue or have any suggestions for resolving?
Thanks

I'm sorry your new laptop isn't working! I think I have some solutions for you and hopefully resolve your issue quickly.
(Make sure your time and date are correct!)
First, reset your router. This is done by unplugging the power from your router and modem. Once ALL the lights on both are out, wait a few seconds. Plug the modem back in, wait for the lights to come on, then the router. Give it time to access the device and assign IP addresses (this takes up to 4 minutes with some models). Once completed, try to reconnect using your HP laptop.
If that does not work, manually reset your IP address by using the command prompt (search for it using the search option on the right menu),
ipconfig /release
ipconfig /renew
This should flush the IP address. You have already reset the DNS, and you may do so again just to clear everything.
If that still does not work, hook the Ethernet cable directly into your laptop and see if it can get online. If it does, then it is a wireless connection issue and you should either return it OR have Geek Squad take a look. If it doesn't work, then either your router will NOT assign an IP address properly due to the computer having the same IP or Name as another computer on your network, or the computer could have a winsoc issue. In this case, you would have to restore the computer or
go to :
microsoft.com/fixit
And use there fix. Download it on another computer, burn to DVD/CD or drop it to a flash drive, then use it on the computer giving you the issue.
Let me know if any of these options work!
- Disclaimer: While Agent Bender is currently employed at GeekSquad, ALL posts made by Agent Bender are her personal opinions, and do not reflect the opinions or policies of Best Buy or GeekSquad. -

When i open my SQL reporting URL it says this page cannot be displayed

Hi All,
I am using SQL Server 2008 with SP3. When i open my open my reporting manager URL. i get the error as "This page cannot be displayed" HTTP Error 500 internal server error. I read few blogs posted below. Tried both but could not help me out
http://social.technet.microsoft.com/Forums/en-US/1a03196f-f8ee-4a66-b08b-b2e02447a25e/can-not-open-page-for-report-manager-url-httplocalhost8080reports-for-sql-server-2008?forum=sqlreportingservices
and
http://ashwaniashwin.wordpress.com/2014/02/28/the-url-has-already-been-reserved-error-while-configuring-the-report-server-url-in-reporting-services-configuration-manager/
But none of them helped.
I tried deleting the reserved URL and re reserved but still did not help.
Tried changing the port number but still no luck.
I analysed the sql reporting error log and found the below.
===============================================
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
===============================================
at ReportingServicesHttpRuntime.BaseWorkerRequest.FilterAndThrowException(Exception e, String message)
at ReportingServicesHttpRuntime.RsWorkerRequest.GetUserToken()
at System.Web.HttpContext.get_ImpersonationToken()
at System.Web.ClientImpersonationContext.Start(HttpContext context, Boolean throwOnError)
at System.Web.HttpApplication.ThreadContext.SetImpersonationContext()
at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext)
at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: Call to GetItemTypeAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Initializing crypto as user: E2K\Lg161489
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Exporting public key
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Performing sku validation
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Importing existing encryption key
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListParentsAction(/).
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListChildrenAction(/, False).
webserver!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Processed folder '/'
library!ReportServer_0-1!ad4!06/07/2014-03:30:51:: Call to GetPermissionsAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:51:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPermissionsAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to ListChildrenAction(/, False).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
I have also attached all the logs in a FTP for further analysis. Please download it from the below link.
https://depositfiles.com/files/cfe6af33b
Can any one please help me. Seems to be a never ending issue to me.

Take a look on link
http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
In case If you rebuilt the server then then linking will break , go in encryption keys option if only delete button is enabled, and backup button is disabled the delete the keys .close the report configuration manager and reopen the manager .Now try
to open report manager url.
Please click "Propose
As Answer" if a post solves your problem, or "Vote
As Helpful" if a post has been useful to you

XML Page cannot be displayed error on interactive reports

Hi, I am having trouble with a user downloading an interactive report as a CSV output. When a user tries to download the interactive report (as it is displayed when the web page loads, no alterations), they are getting this error:
The XML Page cannot be displayed.
Cannot view XML input using XSL style sheet. Please correct the error and then click the refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'http.............'.
This is only happening with a small group of users which doesn't include me, so it has been very hard to troubleshoot. I can download the report and open in Excel without any problems.
I am using Apex version 3.2 and IE 8. The user did not have multiple windows or tabs open logged into ApEx at the same time.
Has anyone ever had this problem before? I could not find a thread with the same issue.
Thanks!

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML page cannot be displayed - Servlet error

Hi,
I am trying to extract XML data from a source using a servlet.But i am getting this error when i run my servlet in IE :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The download of the specified resource has failed. Error processing resource 'http://serverA.h.c.com:9300/p2pd/cog...
</dataset>
Can someone please guide me why i am getting this error? Here is the servlet code that i am using :
package com.cognos.demo;
import javax.servlet.http.*;
import java.io.*;
import com.cognos.developer.schemas.bibus._3.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* To change this generated comment edit the template variable "typecomment":
* Window>Preferences>Java>Templates.
* To enable and disable the creation of type comments go to
* Window>Preferences>Java>Code Generation.
public class XMLGenerator extends HttpServlet
     //Logging information goes here
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException
          response.setContentType ("text/html;charset=utf-8");
          response.setCharacterEncoding("utf-8");
          String xml = null;
          RunReport reportRunner= new RunReport();
          CRNConnect connect=new CRNConnect();
          String url="http://serverA.h.c.com:9300/p2pd/servlet/dispatch";
          String nameSpace="ADS_NS";
          String uid="cognos";
          String pwd="abcd45";
          Logon sessionLogon = null;
          int REP_XML=1;
          try {
          connect.connectToCognosServer(url);
          catch (Exception e)
               e.printStackTrace();
               //System.out.println("Not able to connect to Cognos Server");
               response.getWriter().print("Cannot connect to Cognos server");
          sessionLogon=new Logon();
          String logonOutputSource = "";
          String reportOutput=null;
          //Till the user gets logged in or he exits
          while (!Logon.loggedIn(connect)) {
               try
                    logonOutputSource = sessionLogon.quickLogon(connect,uid,pwd);
                    //System.out.println("Connected to the Cognos server..");
                    System.out.println(logonOutputSource);
               catch(Exception ex)
                    System.out.println("Error : Unknown host ");
               if (!Logon.loggedIn(connect)) {
                    response.getWriter().print("Unable to logon");
                    System.exit(0);
          //Report Processing here
          //String reportName=args[0].trim();
          //locate the selected report
          BaseClassWrapper selectedReport=null;
          selectedReport=reportRunner.findReport(connect);
          reportOutput=reportRunner.runReport(connect,selectedReport,REP_XML,false);
          xml=reportOutput;
          //System.out.println("Main:" + reportOutput);
          System.exit(0);
          try
               response.getWriter().print(xml);
               response.getWriter().flush();
          catch (IOException e)
               response.getWriter().print("Unable to publish xml");
               System.out.println(e);
}I am using some classes to extract xml data from a data source and retrieve that as a string and then i am displaying it using response object.
Any help in this regard would be highly appreciated.
Thanks,
Shishir.
Edited by: Invinc4u on Dec 15, 2008 6:56 AM

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

Run report cause "The page cannot be displayed" OR The connection with the

Hello,
1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
Problem explanation
one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
data,
one report i tried its size is almost 900k ( they are using the same line since last three month and they are
able to run all reports before, bandwidth is 128k), if you run report browser search a little while
for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
this message
Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
The connection with the server was reset.
I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
for
head office client but they are able to run all report with out any error.
any one have idea??
Thanks and Regards,
Khawar

Hello,
Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
Increase the Keepalive time in webcache to a higher value
**************EOF******************
Thanks and Regards,
Khawar

XML Page cannot be displayed -- whitespace is not allowed at this location

To create an online training program I am using Captivate 3
to create the videos then move the published flash file into
Contribute 3 to create the XML and HTM files. Using the same
publishing steps most videos play; however, some videos do not. I
noticed in the FTP that videos which work will display text when I
open the XML file and those that do not I receive the error message
below:
"XML page cannot be displayed"
"Cannot view XML imput using XSL style sheet."
"Whitespace is not allowed at this location. Error processing
resource"
When I click on the flash files in the FTP the videos that
play and ones that do not play both will allow me to play the
video. I need for HealthStream (the web site my videos are stored)
to connect to the FTP but receive the message "error parsing the
XML document and content cannot be launched" due to the error
reading the XML document (located above).
Please help resolve the XML issue.

Downloaded Captivate 3 demo to check it out. Nice program,
bit expensive though...
From what I saw so far the xml-export and inport feature is
used to create swf-files in different languages. Correct?
I don't see Contribute creating any xml or html when
importing the swf created by Captivate, so what do you mean exactly
by that?
Is it a feature (that I don't know yet) that you can load xml
files dynamically into the swf's for different languages? From the
help in Captivate I understand that you open your project, then
import the translated xml, publish and then you have a translated
swf. So I don't see why there is xml on your server. I only see the
swf's that function like they should. Inlighten me please and we
will search for more answers...

Page cannot be displayed' error when 2 events (FireAction and GO) fired

We have created a framework page where FireAction event will be executed
when the value of a calendar item is modified. When we modify the
value and leave the cursor in the field (without tabbing out), and click
GO button, 'Page cannot be displayed' error message will be displayed.
When FireAction event is started, we use CO to retrieve the event. And
when the cursor remains in item1 after being modified and click GO,
2 events will be started (the FireAction event and the GO button's event)
and 'Page cannot be displayed' error will be shown since CO is retrieving
2 events at the same time.
Since by changing certain fields of framework page without tabbing out
is a regualar operation, how can we go around this error when we are
using FireAction event?
sample34_00co.java
package oracle.apps.xx03.ap.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.OADialogPage;
import java.util.Calendar;
* Controller for ...
public class Sample34_00CO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public StringBuffer message = new StringBuffer();
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
// When the browser back button is not executed
if (!pageContext.isBackNavigationFired(false))
System.out.println("NOT FROM BACK BUTTON!! ["+cal.getTime()+"]");
// When the browser back button is executed
else
System.out.println("FROM BACK BUTTON!! ["+cal.getTime()+"]");
//Action being performed when the browser back button is executed
OADialogPage dialogPage = new OADialogPage(STATE_LOSS_ERROR);
pageContext.redirectToDialogPage(dialogPage);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
if ( "updateItem1".equals(pageContext.getParameter(EVENT_PARAM)) )
//When FireAction is executed
System.out.println("item1 FireAction is executed! ["+cal.getTime()+"]");
else
//When other actions beside FireAction is executed
System.out.println("item1 FireAction is not executed! ["+cal.getTime() +"]");
sample34_00pg.xml
<?xml version = '1.0' encoding = 'UTF-8'?>

<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.11_1183" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="PageLayoutRN" windowTitle="Sample34_00 WindowTitle" amDefName="oracle.apps.fnd.framework.server.OAApplicationModule" title="Sample34_00 PageHeader">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="MainRN" controllerClass="oracle.apps.xx03.ap.webui.Sample34_00CO">
<ui:contents>
<oa:messageTextInput id="item1" prompt="item1" dataType="DATE">
<ui:primaryClientAction>
<ui:fireAction event="updateItem1"/>
</ui:primaryClientAction>
</oa:messageTextInput>
<oa:messageLayout id="ButtonLayout">
<ui:contents>
<oa:submitButton id="Go" use="/oracle/apps/fnd/attributesets/Buttons/Go"/>
</ui:contents>
</oa:messageLayout>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
----------

Shive...good one..!!
One thing that you can do if you don't wanna have PPR, is to validate date column in fire action event in CO in process form request, and raise an error if you don't find appropriate format or null , as per your requirement.
--Mukul

The page cannot be displayed while running the report with web link

Hello,
I tried to run the report using a web link similar:
http://hostname/reports/rwservlet?report=WRFTCKL.rdf&userid=use/pass@datbase&desformat=pdf&destype=CACHE&paramform=yes
I am able to see the parameter form, but after I entered some parameter and submit, I got an error as:
The page cannot be displayed.
But if I run it with the paramform=no and attached the parameter/value pair at the end of the link, the report will show on the web.
Anyone knows what is wrong?
Thanks.

try this sample report from
http://www.alexyscorp.com/products.htm
(Download the Forms Reports Integration based on run_report_object (FMB,RDF) )

Error: "The page cannot be displayed" when trying to login to portal

Hi All;
I can not login to portal, when I click login in portal home page
http:<server_name>/pls/portal , the sso login screen will never come up, producing an error The page cannot be displayed
http://:<server_name>/pls/portal/PORTAL.wwsec_app_priv.login?p_requested_url=PORTAL.home&p_cancel_url=PORTAL.home
BI Components:
Portal:portal is up and running.
Http Server is up and running.
OC4J_Portal is up and running
Any one has an idea ?
Thanks.

Try the troubleshooting documentation:
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b19305/cg_app_k.htm#sthref2513
Mick.

Page Cannot Be Displayed So I can't dl Java

I downloaded it on my desktop just fine and my computer is so much faster now. I am now trying to download it on my laptop and it says it can't. So I tried manual and when I clicked on it it said page cannot be displayed. I am running winxp sp2. Please help. Thank you

See Troubleshooting issues with iTunes for Windows updates. Use the same advice as in note 1 but for iTunes. Try the MS fixit, or leave it in place and go to the next step.
tt2

Download BLOB column giving page cannot be displayed

Similar Messages

Maybe you are looking for