Download file into non-sap server

Hi all,
My requirement is to  my program should be able to download the file into Mapped drive , which is Non-sap server .
is it posible ?
Thanks,
Rani

Have you tried it?  I assume that your talking about something other than desktop target?  If so, construct yourself a small test program, containing open dataset for output in text mode and check the return code.

Similar Messages

  • Open Data Set Error while trying to read file from non SAP server

    Hi all,
    is it possible to read data from non-SAP application Sever?
    I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504',
    Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem?
    I make test to read file from SAP application server and it was ok.So how to call other server?
    Thanks!

    Hi,
    Yes it is possible to read data from a non SAP server through the statement OPEN DATASET.
    The important thing to check is that the SAP Server got enough access to the non SAP server so it can perform a reading/writing process depending on your needs.
    You should contact your network administrator and BASIS to help you check the permissions. This can be pretty tricky, specially if the servers are in different domains.
    Regards,
    Gilberto Li

  • Copying file between non SAP and SAP server in background

    Hi,
    I have written a program to copy files from a non SAP server to our SAP server which works when running in the foreground.
    When I try to run this program in the background, I get the following error ...
    Control Framework: Fatal error - GUI cannot be reached
    Can anyone tell me how to do this in the background.
    Thanks.

    Hello,
    seems that you use some customer controls in your program. These controls are bound to a dynpro - and that doesn't work in background.
    You could try to avoid this and just do the copy without using controls.
    Regards Wolfgang

  • How to install transport request files into the SAP system

    Hi Experts,
                    I want to install transport request files into my SAP source and target system . I am from BW/BI background so can anyone help me out with the step by step procedure for the above installation.
    Thanks in advance
    Regards
    Shiva

    Hi,
    What I understand is, you want to transport request from one server to another.
    for example, Development to Qualtiy or Quality to Production.
    For this your transport system must be configured. Please search help.sap.com or google for "How to configure Transport System (STMS)".
    If you want to copy transport request from one system to another system which is not in your landscape, you need to physically move/copy transport request (cofile and datafile) to the target system in /usr/sap/trans/cofiles and /usr/sap/trans/data
    Then import that request using SCC1.
    You can alos perform TEST import for result.
    Regards.
    Rajesh Narkhede

  • How to install SAPOSCOL in non-sap server ?

    Hi,
    Please advise how to install SAPOSCOL into non sap system ? any related document / help ?
    Thank You and Best Regards
    Fernand

    Hi,
    The reason why, i want to install saposcol and sapagent in non sap system because i want to monitoring this serve with system monitoring.
    Finally, i can install with install.cmd from this notes : 704349
    Thank You and Best Regards
    Fernand

  • Problem transferring file to non-sap system from R/3

    Hi,
    I used one Z function module to transfer file to non-SAP system as follows.
    CALL FUNCTION 'Z_INTERFACE_OUT_1'
           EXPORTING
                INTID           = V_INTID
                EXTRACT_DATASET = P_V_FILENAME.
      IF SY-SUBRC = 0.
        WRITE: / P_V_FILENAME, 'file has transferred successfully'.
      ELSE.
        WRITE: / P_V_FILENAME, 'file transfer has failed.'.
      ENDIF.
    I am getting message 'file has transferred successfully'. But it is not found on destination system.Can anyone please tell me the reason.
    Thanks,
    Venkatesh.

    Hi,
    You can use transaction code SNOTE to see whether a particuler OSS note is implemented or not.
    First navigate to GOTO> Download SAP Note and import the OSS note to your system.
    Then navigate to GOTO > SAP Note Browser and check the status of the OSS note, it will show whether it is implemented in your system or not.
    Also in the OSS note, there is release specific information. You can check whether that OSS note is applicable to your release or not.
    Regards,
    Gaurav

  • How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

    I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
    I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
    If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
    Put the Data Flow Task within the Foreach Loop Container
    Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
    I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
    I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
    And that's when I run into trouble...
    Exception from HRESULT: 0xC02020E8
    Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
    Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
    I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
    I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
    Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
    to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
    Thanks for your review and am hoping and praying for a reply and solution.

    Hi ITBobbyP,
    If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
    If in this scenario, please refer to the following tips:
    The Foreach Loop container should be configured as shown below:
    Enumerator: Foreach ADO.NET Schema Rowset Enumerator
    Connection String: The OLE DB Connection String for the excel file.
    Schema: Tables.
    In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
    The connection string for Excel Connection Manager is the original one, we needn’t make any change.
    Change Table Name or View name to the variable Sheet_Name.
    If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
    http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SAP (ECC) extractor to transfer data into Non SAP System

    Hi Experts,
    Scenario : We had a requirement to decommission the existing SAP BW system and merge it into Non SAP BI system (say MSBI).
    Existing BW system getting data from standard extractor and populating till cubes.
    Now If this SAP BW system will be decommissioned and all the data needs to be moved to new Non SAP System BI.
    What will be the approached for this smooth transfer.
    Will SAP (ECC) std extractor will be used to move the data into non SAP BI system ? How ?
    Any documentation and experience will be helpful.
    Thank-You.
    Regards,
    VB

    Hi VB,
    First you need to identify that your MSBI system support BCI(business content integration) method. For example Informatica support BCI and provide RFC plugins to integrate with SAP. If your MSBI support BCI method then you can use standard dataextractors to extract data in new BI system. You will also need to plan the reporting model and how the extracted data will be feeded in your BI datamodel/reporting side. You may use some transformation reference from your existing SAP BI system.
    Thanks
    Amit

  • Uploading the file into XI Appl Server (AL11)

    Hi Guys,
    Iam trying to Upload the file into XI Appl Server (AL11) using SXDA_TOOLS.Can anyone tell me the parameters that i need to pass (Object Type,Program Type,Program  etc...) in SXDA_TOOLS for uploading the file.
    Thanks,
    Kittu.

    Object type     BUS3060
    Program type    DINP
    Program         RCCLBI03
    File type        Phisical file name
    File Name       /tmp/filename.txt
    click on Copy (Ctrl+F5) and enter the source file name by selecting the presentation server from Source frame and target file name by selecting the Application server in the Target Frame.
    Hope it'll help you.
    Regards,
    Eswar.

  • Uploading & Downloading Files into DMS Server using Web Dynpro Java

    Hello Friends,
          I want to Upload a file from Portal to Document Management Server and to Download a file from Document Management Server to Portal,  In short, I want to give the user the facility to Upload a File into DMS Sever via Portal and also to download the file from DMS Sever via Portal.
      Can anybody give me a Input for the same from Both Java Development End as well as ABAP End, more inputs are required from ABAP end, since i have a very less ABAP Experience on working with DMS. Few Questions i have in my mind?
    1. How to actually access the file contents with the help of Document Number?
    2. With the help of Doc-Number we can extract the file from DMS sever but to provide a option for downloading in portal, the   RFC should convert the File Contents into X-String or is there some other way?
    +3. While Uploading the Data should be given in Which format to RFC? Are there any limitation with respect to size or formats. Is there any Standard RFC i can use directly in WD4 Java application to upload the file into DMS Server and which will return me the Document Number? +
    Please give me your valuable inputs.
    Thank You.
    Edited by: TusharShinde on Feb 21, 2011 11:13 AM
    Now, I am able to download the File in Portal via my WD4 Java Application from DMS Server by passing the Document Number, but I am facing the problem in downloading the PDF files, Its not working for PDF files. Please give me inputs for the same.
    Thank You.
    Edited by: TusharShinde on Feb 22, 2011 10:13 AM

    HI,
    Thanks for reply.
    I am able to download the file From DMS server but I am still not able to Upload the File to DMS Server via Portal. For Download also it is working for all file formats but not for PDF any specific reason for the same.
    function zhrf_rfc_dms_download_document.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(LV_DOCUMENT) TYPE  DOKNR
    *"  EXPORTING
    *"     VALUE(LV_FADA) TYPE  XSTRING
    *"  TABLES
    *"      LT_DOC STRUCTURE  BAPI_DOC_FILES2
    *"      LT_OUT STRUCTURE  ZST_DMS_FILE_XSTRING
    data: ls_docfiles type bapi_doc_files2,
             ls_dms type dms_doc_files,
             lt_docfiles type standard table of bapi_doc_files2.
    *      data: LT_OUT  type table of  ZST_DMS_FILE_XSTRING.
      data :wa_out like line of lt_out.
      select single * from dms_doc_files
        into ls_dms
        where doknr = lv_document."Retrieve file
      if sy-subrc = 0.
        ls_docfiles-documenttype = ls_dms-dokar.
        ls_docfiles-documentnumber = lv_document.
        ls_docfiles-documentpart = ls_dms-doktl.
        ls_docfiles-documentversion = ls_dms-dokvr.
    *    ls_docfiles-documenttype = '321'.
    *    ls_docfiles-documentnumber = LV_DOCUMENT.
    *    ls_docfiles-documentpart = '000'.
    *    ls_docfiles-documentversion = 'A0'.
      endif.
      call function 'BAPI_DOCUMENT_CHECKOUTVIEW2'
        exporting
          documenttype    = ls_docfiles-documenttype
          documentnumber  = ls_docfiles-documentnumber
          documentpart    = ls_docfiles-documentpart
          documentversion = ls_docfiles-documentversion
          documentfile    = ls_docfiles
          getstructure    = '1'
          getcomponents   = 'X'
          getheader       = 'X'
    *      pf_http_dest    = 'SAPHTTPA'
          pf_ftp_dest     = 'SAPFTPA'
        tables
          documentfiles   = lt_docfiles.
      data: i_bin type standard table of sdokcntbin,
            i_info type standard table of scms_acinf,
            v_info type scms_acinf,
            v_id type sdok_phid,
            v_cat type sdok_stcat.
      if sy-subrc = 0.
        loop at lt_docfiles into ls_docfiles.
          v_id = ls_docfiles-docfile.
          v_cat = ls_docfiles-storagecategory.
          call function 'SCMS_DOC_READ'
            exporting
              stor_cat              = v_cat
              doc_id                = v_id
              phio_id               = ls_docfiles-file_id
            tables
              access_info           = i_info
              content_bin           = i_bin
            exceptions
              bad_storage_type      = 1
              bad_request           = 2
              unauthorized          = 3
              comp_not_found        = 4
              not_found             = 5
              forbidden             = 6
              conflict              = 7
              internal_server_error = 8
              error_http            = 9
              error_signature       = 10
              error_config          = 11
              error_format          = 12
              error_parameter       = 13
              error                 = 14
              others                = 15.
        endloop.
        if sy-subrc <> 0.
        else.
          data: v_xstring type xstring.
          read table i_info into v_info index 1.
          call function 'SCMS_BINARY_TO_XSTRING'
            exporting
              input_length = v_info-comp_size
            importing
              buffer       = v_xstring
            tables
              binary_tab   = i_bin
            exceptions
              failed       = 1
              others       = 2.
          if sy-subrc <> 0.
          endif.
        endif.
        wa_out-file_name =  ls_docfiles-docfile.
        wa_out-binary = v_xstring.
        lv_fada = v_xstring.
        append wa_out to lt_out.
      endif.
    endfunction.
    The above is the RFC Code,  I am using in my WD4Java app for downloading the file From DMS Server, Is there any Improvement suggested for above RFC to make it work in more efficient way. Please give me input for my Upload RFC.
    Thank You.

  • Special characters downloading file into application server

    Dear Friends,
    i have to download records into excel sheet through back ground job, while downloading records into applications server.
    all records are downloading properly up to here fine but some special characters also downloading. i had downloaded same records in debugging mode from the same internal table here no special characters.
    i found that the structure(standard ( /SCWM/S_LIME_ALL_MON )) which is being used in that some fields are defined as RAW data type this may be the problem.but i tried to convert them using some function modules no result getting dump only.
    i am using data sets to download data into application server here gui_download will not work because it is back ground job.
    can any one please help me in this. its urgent...
    please please help me in this it has been pending since DEC-01-11.
    extra characters like (  #v#M?LQia#####
    #v#M?LQia#####
    #v#)
    my code
      open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
      IF sy-subrc EQ C_ZERO.
        LOOP AT LT_TAB INTO WA_TAB.
          transfer WA_TAB to LV_FLNAM.
        ENDLOOP.
        CLOSE DATASET LV_FLNAM.
      ENDIF.
    Edited by: sairam.kusuma on Dec 16, 2011 6:26 AM
    Edited by: sairam.kusuma on Dec 16, 2011 6:38 AM
    Edited by: sairam.kusuma on Dec 16, 2011 6:39 AM

    TYPES:BEGIN OF ty_stru,
          LGTYP  TYPE /SCWM/LGTYP,
          LGPLA  TYPE /SCWM/LGPLA,
          MATNR  TYPE /SCWM/DE_MATNR,
          MAKTX  TYPE /SCWM/DE_UI_MAKTX,
          QUAN(13)  TYPE C,"/SCWM/DE_UI_QUAN,
          UNIT  TYPE /SCWM/DE_BASE_UOM,
          CAT  TYPE /SCWM/DE_CAT,
          CAT_TXT  TYPE /SCWM/DE_CAT_TXT,
          CHARG  TYPE /SCWM/DE_CHARG,
          OWNER  TYPE /LIME/OWNER,
          ENTITLED  TYPE /SCWM/DE_ENTITLED,
          UI_WDATT  TYPE /SCWM/DE_UI_WDATT,
          UI_WDATU  TYPE /SCWM/DE_UI_WDATU,
          SKZSI  TYPE /SCWM/LQUA_SKZSI,
          QUANA(13)  TYPE C,"/SCWM/DE_UI_QUAN_PACKED,
          ALTME  TYPE /SCWM/DE_AUNIT,
          ITMNO  TYPE /SCDL/DL_ITEMNO,
          WEIGHT(15)  TYPE C,"/SCWM/DE_NWEIGHT,
          UNIT_W  TYPE /SCWM/DE_WGT_UOM,
          VOLUM(15)  TYPE C,"/SCWM/DE_NVOLUME,
          UNIT_V  TYPE /SCWM/DE_VOL_UOM,
          CAPA(15)  TYPE C,"/SCWM/DE_CAPAUSE,
          SN_STOCK  TYPE /SCWM/DE_SER_STOCK,
          END OF ty_stru.
    DATA: LV_LGNUM TYPE /SCWM/LGNUM VALUE 'R10',
          LV_FLNAM TYPE rlgrap-filename VALUE '/tmp/RAMA.xls'.
    CONSTANTS: C_ZERO TYPE I VALUE '0'.
    DATA: LT_TAB TYPE STANDARD TABLE OF /SCWM/S_LIME_ALL_MON,
          WA_TAB TYPE /SCWM/S_LIME_ALL_MON,
          i_stru TYPE STANDARD TABLE OF ty_stru,"
          wa_stru TYPE ty_stru.
    REFRESH LT_TAB.
    CLEAR: WA_TAB.
    *this is modified function module from /SCWM/S_LIME_ALL_MON
    CALL FUNCTION 'ZEWM_F_PHYSICAL_INVENTORY_STOC'
      EXPORTING
        IV_LGNUM             = LV_LGNUM
      IV_VARIANT           =
      IV_MODE              = '1'
      IT_DATA_PARENT       =
      IMPORTING
        ET_DATA              = LT_TAB
      EV_RETURNCODE        =
      EV_VARIANT           =
    CHANGING
      CT_TAB_RANGE         =
    i have to download what are the fields defined as structure.
    1)when ever i am using the internal table(LT_TAB) to download getting specials characters(####) with all records for the fields QUAN, QUANA, WEGHT,VOLUM and CAPA.
    open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
    IF sy-subrc EQ C_ZERO.
      CLEAR: WA_stru,
             wa_tab.
      LOOP AT LT_TAB INTO WA_TAB.
        transfer WA_TAB to LV_FLNAM.
        CLEAR: WA_TAB.
      ENDLOOP.
      CLOSE DATASET LV_FLNAM.
    ENDIF.
    2)if i take another internal table with converting them as char file is downloading with out special characters but it is downloading single line only but not the hole data.
    if i have the below code getting only single line records not total records without special characters.
    open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
    IF sy-subrc EQ C_ZERO.
      CLEAR: WA_stru,
             wa_tab.
      LOOP AT LT_TAB INTO WA_TAB.
         wa_stru-LGTYP = wa_tab-LGTYP.
         wa_stru-LGPLA = wa_tab-LGPLA.
         wa_stru-MATNR = wa_tab-MATNR.
         wa_stru-MAKTX = wa_tab-MAKTX.
         wa_stru-QUAN = wa_tab-QUAN.
         wa_stru-UNIT = wa_tab-UNIT.
         wa_stru-CAT = wa_tab-CAT.
         wa_stru-CAT_TXT = wa_tab-CAT_TXT.
         wa_stru-CHARG = wa_tab-CHARG.
         wa_stru-OWNER = wa_tab-OWNER.
         wa_stru-ENTITLED = wa_tab-ENTITLED.
         wa_stru-UI_WDATT = wa_tab-UI_WDATT.
         wa_stru-UI_WDATU = wa_tab-UI_WDATU.     
         wa_stru-SKZSI = wa_tab-SKZSI.
         wa_stru-QUANA = wa_tab-QUANA.
         wa_stru-ALTME = wa_tab-ALTME.
         wa_stru-ITMNO = wa_tab-ITMNO.
         wa_stru-WEIGHT = wa_tab-WEIGHT.
         wa_stru-UNIT_W = wa_tab-UNIT_W.
         wa_stru-VOLUM = wa_tab-VOLUM.
         wa_stru-UNIT_V = wa_tab-UNIT_V.
         wa_stru-CAPA = wa_tab-CAPA.
         wa_stru-SN_STOCK = wa_tab-SN_STOCK.
        transfer WA_stru to LV_FLNAM.
        CLEAR: WA_stru.
      ENDLOOP.
      CLOSE DATASET LV_FLNAM.
    ENDIF.

  • How to read XML file kept on NON-SAP server using the Http URL ?

    Dear Experts,
    I am working on CRM2007 web UI. I need to read a XML file placed on a shared server location by a third party program. Then process that XML file into CRM and create a quotation using the data extracted from the file.
    All i have with me is the http URL that points to the location of the file.
    I am supposed to read the file , create quotation and at later point of time i would be asked to update the quotation and then generated new XML representing updated quotation and replace the XML file on shared server location with this new updated XML file.
    I know how to extract data from XML file into ABAP but i have no clue as to how to access the file on some other server using the http url i have and how to read it ?
    I searched on the forum and i found the codes for reading XML file that is located either on client machine OR on the Application server wheareas my file is on some other than sap application server.
    Please help me as its an urgent issue .
    Points will be rewarded for sure.
    Please help.
    Thanks in advance,
    Suchita.
    p.s. : the http url to the file location is like -->
    http://SomeServerDomain/SomeDirectory/file.xml

    hi,
    interesting task.
    to request the file by a http call you need to create an if_http_client object.
    More info is [here|http://help.sap.com/saphelp_nwmobile71/helpdata/en/e5/4d350bc11411d4ad310000e83539c3/frameset.htm]
    to parse the file you either have to work with the ixml packages ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/b5413acdb62f70e10000000a114084/content.htm]) or you use an XSLT transformation ([info|http://help.sap.com/saphelp_nwmobile71/helpdata/en/a8/824c3c66177414e10000000a114084/content.htm]).
    uploading the final file isn't so easy. if you only have http, you should write a server script to allow uploading of the new file and copying it into the place of the old file. but you definitely need the script.
    now it's your take. depending on how experienced you are in ABAP and networking this might turn out to be easy or pretty complicated.
    have fun,
    anton

  • How to Save the  file into R/3 Server Path

    Hi Friends,
    I have one Query on WDJ. Here I have two requirements.
    I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
    CED -
    >is R/3 System ID
    Under System id we can save this file.
    Here EP Server and R/3 Servers in Diff Systems.
    I was write codeing
    InputStream text =      null;
         int temp = 0;
         try
         File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
    //       String File = "abc.xls";
    //       String file = "anat" + ".xls";
         wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
         FileOutputStream op =      new FileOutputStream(file);
    //       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
    //       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
         wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
         if (wdContext.currentContextElement().getResource()!= null)
         text = wdContext.currentContextElement().getResource().read(false);
         while((temp=text.read())!= -1)
         op.write(temp);
         op.flush();
         op.close();
    //        path = file.getAbsolutePath();
         path =      "/exchange/CED/"+file;
         wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
         catch(Exception ex)
              wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
    My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
    Regards
    Vijay Kalluri
    Edited by: KalluriVijay on Apr 20, 2010 11:01 AM

    Hi Friends,
    I have one Query on WDJ. Here I have two requirements.
    I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
    CED -
    >is R/3 System ID
    Under System id we can save this file.
    Here EP Server and R/3 Servers in Diff Systems.
    I was write codeing
    InputStream text =      null;
         int temp = 0;
         try
         File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
    //       String File = "abc.xls";
    //       String file = "anat" + ".xls";
         wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
         FileOutputStream op =      new FileOutputStream(file);
    //       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
    //       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
         wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
         if (wdContext.currentContextElement().getResource()!= null)
         text = wdContext.currentContextElement().getResource().read(false);
         while((temp=text.read())!= -1)
         op.write(temp);
         op.flush();
         op.close();
    //        path = file.getAbsolutePath();
         path =      "/exchange/CED/"+file;
         wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
         catch(Exception ex)
              wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
    My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
    Regards
    Vijay Kalluri

  • Delivery document data transfer to non sap server.

    Hi,
    My requirement is ,when i created delivery label (vl01), this delivery document should be  sent to FTP server instead of printer in flat file format.
    Normally for delivery document printing we use VL71 t.code,but in my requirement i  have to create new program and configure this program in NACU tcode for particular output type.
    How we approach this scenario, please help me.(for data down load to flat file and transfer to server).
    Thanks in advance.

    Hi,
    I think you are mixing different concepts. UD connect , DB connect and Web services are methods to upload data from non-SAP source systems to BW. Ud connect is to loada data from SQL tables , DB connect from oracle table.
    If you want to transfer data to other systems Open hub is the easiest way. You can put the data in a flat table throught the open hub. You can fill the table with delta method.
    Open hub allows to load data from, infocubes, dso, or infoobjects.
    I hope it helps.

  • Can't download files on Android from Server 2012 Essentials Remote Web Access

    I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011.  Employees like using Remote Web Access to log in from anywhere and have access to shared folders.  It works perfect on a Desktop computer, but when they try to
    use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails.   When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
    separately to make this happen?
    I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
    I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
    but eventually after a few minutes, will time out and show "Download Unsuccessful".
    Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
    UPDATE:  I found this in the event handler when I tried to download something from a mobile device...
    - System
    - Provider
    [ Name] ASP.NET 4.0.30319.0
    - EventID 1309
    [ Qualifiers] 32768
    Level 3
    Task 3
    Keywords 0x80000000000000
    - TimeCreated
    [ SystemTime] 2014-01-12T16:49:12.000000000Z
    EventRecordID 72818
    Channel Application
    Computer MYSERVER.MYDOMAIN.local
    Security
    - EventData
    3005
    An unhandled exception has occurred.
    1/12/2014 11:49:12 AM
    1/12/2014 4:49:12 PM
    953eedf1ad414391a193e5f98a281da5
    263
    3
    0
    /LM/W3SVC/1/ROOT/Remote-1-130340167702975633
    Full
    /Remote
    C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
    MYSERVER
    2592
    w3wp.exe
    NT AUTHORITY\NETWORK SERVICE
    HttpException
    Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
    /Remote/fs/MobileDownload.aspx
    MY.IP.ADDRESS.141
    MYDOMAIN\user
    True
    Forms
    NT AUTHORITY\NETWORK SERVICE
    31
    NT AUTHORITY\NETWORK SERVICE
    False
    at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi,
    Before going further, would you please let me confirm something firstly?
    Would you please let me know if all Android devices
    encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
    Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
    the Android device, will still fail to download?
    Please check if there has enough free space in Android devices that be used to save download.
    When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
    it can find. Then monitor the result.
    Run the Windows Server 2012 Essentials Best Practices Analyzer
    http://technet.microsoft.com/en-us/library/jj200181.aspx
    In addition, regarding to the Event ID 1309, please refer to the following articles.
    Event ID: 1309 Source: ASP.NET 4.0.30319.0
    http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
    Hope this helps.
    Best regards,
    Justin Gu

Maybe you are looking for