Download iOS 8 once to Mac Mini Server and upgrade all iOS devices in the network

Is it possible to download iOS8 only once to the Mac Mini Server and use it to upgrade all eligible iOS devices (iPhones and iPads) in the same LAN? 
I tried the following methods and they are just not working:
1. Connect an iPads Mini with Retina Display to the iTunes on Mac.  I chose Download Only. Once downloaded the iPad Software Upgrade, I upgraded the connected iPad to iOS8.  Then I connect another iPad (used to be on another Mac) to the same iTunes.  I had to download iOS 8 again.  It's not using the same downloaded iOS 8 file. (I did the same thing for an iPhone.  Same result.)
2. I turned on the Caching Service (not Software Upgrade Service, i.e. for Mac Software) on the Mac Mini Server from the Server app.  I then repeat step 1 above and got the same result.  It seems that the Caching Service does not cache the iOS 8  Software Upgrade like what it does for other apps.  (I think I may need to use some Apple Scripts but I have no such experience.)

Yes, it should work that way.  However, I was told by an Apple Support that there was a problem and thus Server 3.2.1 was unable to do so.
I paid for Server 4 and it better provides the expected Caching Services for both iOS Software and Mac Software through the iOS and Mac App Stores.

Similar Messages

  • I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

    I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

    If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
    If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

  • Small fast network with Mac mini server and Promise Pegasus?

    I have 7 Mac Pros and iMacs that need to be connected to the same storage. I'm doing non MPI-based numerical modeling so the transfer rates have to be fast but not infiniband fast. I'm considering a setup with a Promise Pegasus thunderbolt RAID connected to a Mac Mini running Lion server for Access controll/Roaming homer directories. The Mac Pros and iMacs would the be connected via 1Gb ethernet.
    My question is where the bottlenecks in this setup would be. The server software/hardware? The network? What else am I forgetting

    I assume you're looking at Mac mini because you've already run the numbers on Mac Pro and ruled it out. I wonder how many buyers are opting for Mac mini solely for those Promise Thunderbolt arrays.
    I also assume that each of your users is currently using a single gigabit Ethernet port to connect to the LAN.
    If these assumptions are accurate, then I think that a Mac mini will work as long as you and your users have appropriate expectations. The win from putting this server in place won't be networked storage that outperforms an internal SATA drive, although in bursts it probably can. The solution you've described is smart because it's centralized, securable and adds a layer of data protection (RAID).
    You asked about bottlenecks. I can think of three, two of which you can work around now or in the near future. The first is Mac mini's slow internal hard drive(s). You'll have a solution in hand: Boot Mac mini from the array. Some consider that to be a controversial choice, but you shouldn't spend extra for the Mac mini server with dual 7200 RPM drives. The less costly Core i7 configure-to-order upgrade will give you a bigger boost.
    Booting from the array also protects you from the most likely "repair" scenario for Mac mini: Swapping out your entire machine.
    The second issue is Mac mini's lack of an expansion bus. If you get more users or start using apps that demand more from the LAN, you might want to fire up additional gigabit Ethernet ports. Mac mini has just one. At present, the only way to add a gigabit port is with a Thunderbolt PCIe bus expander. Early next year, there should be more options that connect directly or via an intermediate bus like ExpressCard/34 or USB 3.0.
    The one limitation you're powerless to work around is RAM. Mac mini tops out at 8 GB. That meets requirements, but it will be tight if you try to use Mac mini as a client and a server. I deploy them headless so no one's tempted to use the console.
    You can improve your odds that gigabit will cut it by using heavy, short Cat6 cables and a switch dedicated to the Mac LAN. Use Mac mini's built-in Wi-Fi to keep Remote Desktop and other low-priority traffic off the wire.
    Whatever solution you choose, I wish you the best of luck.

  • Mac mini server has suddenly stopped seeing one or the other bluetooth devices! Batteries have been changed and they will connect to an older Mac mini. Server will now only see one or the other but not both.

    My Mac mini server has suddenly stopped seeing one or the other bluetooth devices, either the wireless keyboard or the mouse( both apple products) have tried new batteries, at first it was the mouse that stopped responding, but upon rebooting the computer now the keyboard will not respond and the mouse works. Both work fine on an older Mac mini that I hooked back up to check.

    There is absolutely no reason why they should not bothe be able to connect to your WiFi network. The easiest place to start would be to reboot your router. Unplug it for about 30 seconds and then plug it back in again. I would also restart both the iPad and the iPhone.

  • HT204350 I,m going to change my Mac mini server and time capsule at the same time what's the best way to transfer from both of my old machines

    I've just purchased a new Mac mini server and also a new time capsule is there any easy way to ghost or transfer the new machines at the same time or is it best to do one at a time?

    I have no direct experience transferring a TC and computer at the same time, but prudence tells me to do one, test to be sure it is correct only then do the other. It will take twice as long from process start to finish, but avoids any nasty surprises at process end. In close to 40 years experience, I have never seen a "crash conversion" (everything at the same time) that did not have at least one major disaster. I am sure it can happen but the odds are heavily against it. Patience is a virtue!

  • Mac Mini Server and RAID

    Hello,
    I have now the new mac Mini Server with LION.
    All is already intalled but I would like to have a raid solution.
    I looked here > https://discussions.apple.com/message/10819777#10819777
    But it's Old and close, and there is no DVD in the Box.
    I Know, I can download Lion & every softwares but I am not sure about the best way to do that.
    First, I use a Big USB Key to use with Time Machine. Perhaps it will be better and fast to install than Apps with my internet connection. 2 - I have to use the disk application to format the 2 disks... Do I need to be in target mode with another mac ?
    I read there is a problem after with time machine.. true ?
    I am sure lot's of people want to use mac mini server with Raid disk.
    Thank you for your help.
    Jeff

    Look at
    https://discussions.apple.com/thread/3197548?start=0&tstart=0

  • Is there a difference between the Mac Mini Server and installing the Lion Server on an iMac?

         So, I was wondering what the difference is between installing the Lion Server on an iMac as opposed to buying the Mac Mini Server because the iMac may be a cheaper solution for me since I intend to purchase a new monitor, keyboard, mouse and accessories if i purchase the Mac Mini Server.

    If you intend to leave the server running all the time a Mac mini server would probably make more sense.  It isn't necessary to keep a monitor, mouse and keyboard connected to the server as you can use the server management tools, remote desktop and SSH via the terminal window on your iMac to manage the server remotely once it's up and running.

  • Mac Mini Server and Server.app

    I purchased a Mac Mini with Server last year. I have placed it in a closet as my home server. I would like to be able to open Server.app from my Laptop connected on the same network. I have tried to take the "Server.app" from the Applications folder on the Mac Mini and transferred it to the Applications folder on my laptop. The OSX version that I am running on my Mac Mini server is 10.7.5. The OSX version that I am attempting to run the Server.app from is 10.9. When I try to launch the Server.app from my laptop (running 10.9) I get a message that says: "You can't use this version of the application "Server.app" with this version of OS X. You have "Server.app" 1.5.0".
    Is this possible? Do I have to pay in the app store to download Server.app even though it came bundled with my Mac Mini?

    It is standard in the software industry to have to pay for software upgrades. While Apple have chosen to make the Mavericks (10.9) upgrade free, the matching Server.app upgrade is not free.
    You are not forced to upgrade to Mavericks, you can if you wish continue to use Lion (10.7) and its matching Server.app version. What you do need to do is use matching versions.
    It should be noted that the 'full' cost of Server.app at only $19 is ludicrously cheap - far cheaper than the upgrade cost of most software.
    In terms of using Server.app on your Mavericks laptop to administer your Lion server and the fact you can't run the Lion server version on your laptop, it is possible to use the Mavericks version of Server.app on your laptop to administer a Lion or Mountain Lion version of Server.app. Therefore you could buy the new Server.app for your laptop, leave your server still on Lion and use the new version to administer your server.
    Or as coocooforcocoapuffs said you can use Screen Sharing or ARD to remote control your server and use Server.app on your server for administration.

  • Windows 7 on mac mini server and raid 1

    I just purchased a 2011 mac mini server with the hopes of installing windows 7 alongside lion.  Then my goal was to have the two drives mirrored.  I successfully mirrored the two drives using disk utility and then proceeded to install lion.  This all went fine.  Imagine my shock when I loaded up bootcamp to see an error message describing it's inability to install windows on a raided system.  The thought hadn't even occured to me that this would be an issue. 
    I have searched through various forums and other places on the internet and haven't found a solution.  I am curious if I can get anyone with any experience in this area.  Is it possible to have mac and windows installed on a drive... and have that drive mirrored to the second drive... regardless of what os i'm booted into?
    Thanks for your help guys

    The GUI version of Disk Utility is very limited in what sort of RAID configurations you can create. It will only allow you to have a single partition on the disk and to make a RAID using that.
    Boot Camp requires creating additional partitions on the disk and hence it complaining.
    There is a commandline version of Disk Utility called diskutility (duh!). It has far more options available. Details for this command can be obtained by typing man diskutility in Terminal.app.
    It appears that in theory you might be able to do the following.
    Start off with both disks not setup for RAID
    Use Boot Camp to create the Windows partition. Repeat this on each disk.
    Then in Terminal.app manually convert the boot Mac partition to a RAID using diskutil appleraid enable
    Then add the matching partition on the second drive to make it a working mirror using diskutil appleraid add
    Then in Terminal.app manually create a RAID for the Windows partition using both drives and use FAT32 as the format using diskutil appleraid create
    Then boot and run the Windows installer and tell it to erase the Windows partition as NTFS
    I cannot gurantee the above will work and you should obviously have backups if needed. Another option would be to have the Mac partition covered by RAID but not the Windows partition, this would result in three volumes one Mac RAIDed volume, and two other non RAIDed volumes even though you have two physical disks.

  • Mac Mini Server and Adobe Creative Suite

    I am looking for buying a new server and wonder if the Mac Mini with OSX Server is powerful enough.
    4 Intel based macs in the office, all working with the Adobe CS4 package creating a weekly newspaper.
    The client macs are mainly working with InDesign and Photoshop files. There is a heavy use of Bridge for seachings and Smart Folders. From InDesign we create PDFs based on InDesign Book (recompiling info from various InDesign docs into one PDF).
    Will the Mac Mini with OSX Server be powerful enough?
    We are currently working with a QNAP NAS Server with 2 500 gb discs mirroring, which aparently doesnt fulfill the needs.
    Anyone can recommend the Mac Mini OSX Server?

    Which QNAP are u using?
    Should be able to support 10 mac in an office like yours!
    A minimum TS 239 pro surely does the job.
    Why use mirroring in a QNAP NAS!? IT got great backup feature
    put the 2 drive in raid 0
    If not available onsite - Buy an external 2 TB used to backup the qnap daily or at least 3 times a week.
    In my office we work directly with the indesign files on the nas without any issue.
    If you will NOT be using all the features of mac os x server, its NOT worth the investment.
    When you say powerful enough what do you mean?:
    - Holding your files? any storage will do.
    - Functions and services like ICHAT, ICAL, ACL, WEB for a mac office, YES OS X Server is the thing you need.
    Also consider that as of now QNAP NAS does not offer any mean of being bind to LDAP. Even AD binding seems to be an issue, have a look on their discussion forum.
    Setting MAC OS X SERVER as PDC and trying to bind the QNAP to it is a kind of an issue requiring adequate human resource for config.
    Investing in the os x server now you will leave the QNAP on its own for file sharing, unless going through Global SAN, which, combine with Mac OS X server and QNAP/iscsi is a wonderful solution.
    Wonderful solution only if you Mac OS X Server machine have TWO Gigabit NIC and you switch support VLANS. So here surely not the mini, though still depend on the size of the files you work with.
    Then again you will need to rethink your Backup solution, may be going with combination of : CarbonCopyClonner, Automator and Ical.
    The Mini Server with a DAS will suit your need. Already in possession of a QNAP NAS I dont see a Mini Server and external FIREWIRE RAID box be a good investment unless you are of those kind of rich business who dont know that in madagascar woman are giving birth in the streets without any doctor, in jakarta children below 5 yr old are being left on their own to survive the streets…

  • Mac mini server and media center

    I recently purchased a Mac Mini Server for a few reasons.  One being to put all my music, video and photos on it and play it on my TV via the HDMI cable.  I also want to share that music, video and photos with my wife and my daughters over the network.  
    So mainly one video, music and image library shared with a MBP an 3 MB's on my network.  
    Also most if my video is from our iPhones.  
    I'd also like to put all my home movie DVDs onto the server as well.  
    Ideally all the data on the server can be played on the TV and all 4 Macs at the same time and it will be organized and easy to access.  
    Any ideas of what I should do?   I know iPhoto won't let more then 1 user at a time have access so that's out.  
    If you have any ideas that would be great.  
    Thanks,
    Darren   

    iPhoto should really just be for still images. I don't think the automatic media scanner expects to see videos there. (This would be true of most 3rd party media center applications).
    For further assistance, you might wish to consult on the Plex Forums on their website. I'm sure your feedback there would be appreciated.

  • Mac Mini Server and Windows SBS

    I am running an aging Dell server with SBS 2003 and wondered whether it would be possible to use one or perhaps two Mac Mini Servers for my needs.  I used to host my own Exchange on this server but I was running out of HD space and it was not easily upgradable so I opted to use Hosted Exchange and use the old server for two things: as a File Server and to run a databse that was written for us in MS SQL Server.  I access the SQL database via RDP from my Dell laptop (docked in the office and connected to two monitors with extended desktop).  I have long been a Mac user at home and have someone else working on my team now who uses a Macbook Pro.  He is currently not using the server at all, but it would make sense for him to be able to access some aspects of the File Server.  My question is whether I can replace this Dell Server with a Mac Mini Server but booting in Windows SBS 2008 or whatever the newer version is, assuming it can still run the old SQL Server database.  Would it be possible to use the same Mini Server as a File Server or better to use a separate one for that or perhaps some other solution for a File Server.  I would like things to be RAID so that I have backups which are required for compliance reasons.  I currently run a nightly backup of the data on teh File Server and the SQL database onto an external drive and also the same back up is done using iBackup as an offsite back up.  I need the developers of the SQL Server database to be able to remote in from their Windows machines in India for periodic updates and system maintenance.  I also would need to be able to access the same database from my laptop in the office, and I believe there are limits on the number of connections one can have with SBS.  I do have VPN access set up via my Sonicwall TZ210 router/firewall that enables me to access the Server if I am traveling with my laptop or am at home on my iMac (although that client has never worked properly) but currently our internet connection is too slow to make the VPN usable when I'm away from the office.
    Thanks to anyone who can answer all or part of these questions.  Perhaps I should have one Mini Server for the SQL database and one as a File Server (or could that just be done with a network drive?  I'm not sure I really know the difference - I'm a solo act here, not a systems guy, so am feeling my way somewhat).

    Hi might see if you can run that Server version in OSX using...
    Parallels...
    http://www.parallels.com/
    VmWare Fusion...
    http://www.vmware.com/mac
    VirtualBox...
    http://www.virtualbox.org/wiki/Downloads

  • HT4929 I have a mac mini server and iCloud

    running a mac mini server, system 10.6.8, purchased Jan, 2012 (same time purchased iMac with newer OS & no problems syncing). Can I upgrade this mac mini server to sync with iCloud?
    thanks in advance

    Welcome to the Apple community.
    It's difficult to say whether your Mac will run Lion, and hence iCloud, without knowing the specifications. The specifications required for Lion are as follows:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended); you can install without Mac OS X v10.6 by using an OS X Lion USB Thumb Drive, available on the Apple Online Store
    7 GB of available disk space
    2 GB of RAM
    However, it is sometimes simpler just to try to purchase Lion from the Mac App Store, the Mac App Store will let you know whether your Mac is capable of running Lion.

  • Help With MAC Mini Server and New SSD

    Hey Guys,
    I just got a Mac Mini Server. I swapped out one HD for a new SSD. A Crucial One.
    I am booting in recovery mode and it only sees one HD and says it is 1.5 TB, (1 tb regular and the new SSD is 512)
    I just want to run osx on the SDD .. help

    I'm unsure of the proper procedure as I'm not experienced dealing with Fusion Drive setups. If Disk Utility shows you have a 1.5 TB drive, then what do you see when you boot the computer and check disk drive space using Get Info? I know you can revert the volume you have back to standard format if you don't mind using the Terminal in your Utilities folder:
    Open the Terminal and paste or enter the following at the prompt:
    diskutil list
    Press RETURN. This will list for you the device information for your HDD. Here is an example of the output:
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:                  Apple_HFS Yosemite                119.2 GB   disk1s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
    You want what you see at the top left - /dev/diskn, where n is the integer number. Then enter or paste at the prompt:
    sudo diskutil cs revert /dev/diskn ; replace the n with the integer number found above.
    Press RETURN and enter your admin password when prompted. It will not echo to the screen, so be careful typing. Press RETURN again. Wait until it completes the process which is when the prompt returns.
    Given the potential danger when using the Terminal in this way, please be sure you have first made a reliable backup. Better safe than sorry.

  • Mac mini server and harddrive 1 of 2 failed now fan runs full speed

    I have a 2010 mac mini server. One of the drives failed.
    I took out the bad one and the fan started to run full speed.
    Replaced that drive with a new one. runs great but fan is running.
    I put the temp sensor in exact same place but had to use a small pc of tape
    to hold it on. I used the same tape that was holding the wires to the drive.
    I used the temp sensor connector on the logic board closest to the fan connector?
    Does that matter?

    Hello, possible work arounds...
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive. 
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating.
    Free SSDFan Control...
    http://exirion.net/ssdfanctrl/

Maybe you are looking for