Download .jpg image from Network Analyzer 8722es to PC

I Have an Agilent 8722ES network Analyzer and I need to get the image, to save it with the test report.
I can get the data and put in in a graphic but I prefer to put the real image as the Network Analyzer diplay, inlcuding the Markers, real frequency, colors, settings, etc.
the Network Analyzer is capable to save the image as .jpg using the integrated 3.5' disk drive, but I need to save in real time the result and the picture.
Do any body has an aplication than can help me with this? I tried to find something over net and in the Programming manual , but I can't find any.
Thank you for your help guys...

Imontoya
I took a look at the manual for the 8722ES and as you stated the only way to get a jpeg file is to save it to floppy.
From here I can see two options
1. Call Agilent support and see if there is a VISA command to save the image. If there is a VISA command we can call it from LabVIEW.
2. Use the Instrument Driver to import the raw data and create your own display in LabVIEW that looks like you want. You can then you can take a screenshot and do whatever you want with it.

Similar Messages

I want to download an image from the url and image is in byte format

hi
i want to download an image from the url
http://www.tidelinesonline.com/mobile/j2me_v1?reqType=imageJoin&imageCount=1&month=1&day=1&year=2008&id=1&imageWidth=230&imageHeight=216&imageDepth=8&imageUnits=feet&imageType=JPG&msisdn=456
first 5 digits will be the length of the image,we need to download except first 5 digits and display an image file
i need to finish this today
pla reply if any body knows solution for this.
thanks in advance
Mraj

You do not need to do anything - iPhoto always keeps the original and you can revert to it at any time
If you want to be able to see the original and the cropped version in iPhoto at the same time duplicate the photo (this does not really duplicate but simply starts a new edit stream for the photo - command-d) and crop the duplicate
LN

I want to download and image from the url and image is in byte format

hi
i want to download the image from the url:
http://www.tidelinesonline.com/mobile/j2me_v1?reqType=imageJoin&imageCount=1&month=1&day=1&year=2008&id=1&imageWidth=230&imageHeight=216&imageDepth=8&imageUnits=feet&imageType=JPG&msisdn=456
can any one help me to do this i need to finish this today plz help me.
first 5 character 09593 is the length of the image we need to substract image length from total length.
thanks in advance
M.Raj
Edited by: Mraj.Bangalore on May 15, 2008 12:01 AM
Edited by: Mraj.Bangalore on May 15, 2008 12:01 AM

hi
thanks for the reply,
that works only if .png file is there in the path.
i worked it out, it is working fine now
try
               httpConn = (HttpConnection)Connector.open(url);
               is=httpConn.openInputStream();
               responseCode = httpConn.getResponseCode();
               if(httpConn.getResponseCode() == 200)
                         ByteArrayOutputStream bStrm = null;
                         byte[] data = new byte[512];
                         int contentLen = httpConn.getHeaderFieldInt("Content-Length", 0);
                         if(contentLen > 0)
                              response = new byte[contentLen];
                         else
                              bStrm = new ByteArrayOutputStream();
                         int count = 0, tmp =0;
                              while ((count = is.read(data)) >= 0)
                                   if( contentLen > 0 )
                                        for(int i=0;i<count && tmp+i < contentLen;i++)
                                             response[tmp+i] = data;
                                        tmp += count;
                                   else
                                        bStrm.write(data, 0, count);
//                                    if( aborted)
//                                         break;
                              data = null;
                              System.gc();
                              if( contentLen <= 0 )
                                   response = bStrm.toByteArray();
                                   bStrm.close();
                                   bStrm = null;
                                   System.gc();
                    else
//                          main.showAlert("ERROR","Connection failed.Please access again later");
//                          main.changeToMain();
          catch(Exception e){
               response = null;
               responseCode = 0;
//                main.showAlert("ERROR","Connection failed.Please access again later");
//                main.changeToMain();
          catch(OutOfMemoryError e){
//                main.showAlert("ERROR","Not enough memory, please disable some apps or delete files and try again.");
//                main.changeToMain();
          finally
               System.out.println("Before Creation"+response.length);
               img = Image.createImage(response, 5, response.length-5);
               System.out.println("After Creation");
               CanvasImageFile canvas = new CanvasImageFile(this);
               midlet.display.setCurrent(canvas);
               try
                    if( is != null )
                         is.close();
                         is=null;
               catch(Exception ex){
//                     main.showAlert("ERROR","Connection failed.Please access again later");}
                         if( httpConn != null )
                         try {
                                   httpConn.close();
                              } catch (IOException e) {
                                   // TODO Auto-generated catch block
                                   e.printStackTrace();
                         httpConn=null;

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

Trying to upload DSCF.JPG images from my Mac Pro to Photostream in iPhoto

I am trying to upload the DSCF.JPG images from my Mac Pro (originally taken on my Fuji Finepix camera) to Photostream in iPhoto.
I then want these images to load onto my iPhone 5 through iCloud.
I have tried dragging the images over from a desktop folder to my Photostream folder in iPhoto – no good. They just won't copy over.
I have dragged the images over from a desktop folder into a new folder in iPhoto – that worked, but I can't then get them transferred or copied over to the iCloud folder.
Is it the DSCF format that my Photostream doesn't like? Why would that be?
And does anybody know what I can do about it?
Thanks so much.

Hi dinglydell2,
The picture formats that are supported by Photo Stream are described in this article -
iCloud: Shared Photo Streams FAQ
http://support.apple.com/kb/HT5903
In particular -
Shared Photo Streams supports JPEG, TIFF, PNG, and most RAW photo formats. On your Mac or PC, your photos are downloaded and stored in full resolution. On your iPhone, iPad, iPod touch, and Apple TV, your Photo Stream photos are delivered in a device-optimized resolution that speeds downloads and saves storage space. While actual dimensions will vary, an optimized version of a photo taken by a standard point-and-shoot camera will have a 2048 x 1536 pixel resolution when pushed to your devices. Panoramic photos can be up to 5400 pixels wide.
If the Preview application can open your photos, you may be able to export them to a more compatible format.
Preview 5.x: Convert graphic file types with Preview
http://support.apple.com/kb/PH5910
The process is the same for more recent versions of Preview.
Open a file in Preview, and choose File > Export.
Choose a file type from the Format pop-up menu. If you don’t see the file type you want, hold down the Option key as you click the Format pop-up menu to see specialized or older formats.
Depending on the file format you choose, additional options may appear. If you choose JPEG or JPEG 2000, you can adjust the image’s quality. If you choose PDF, you can choose a Quartz filter to apply to the image, and you can encrypt the image so that only those with the password can view it.
Type a new name, or choose a new location for saving the converted file, and then click Save.
Thanks for using Apple Support Communities.
Best,
Brett L

Creating a .jpg image from with in the J2ME app

Hi,
I want to send a document to the printer over bluetooth to print.
For that I searched on net, but couldn't find any APIs supported by J2ME to print it. I also found a link http://www.hcilab.org/documents/tutorials/Brother/ where I found that I can send the data by creating an image and then writing data (text or image ) in to it, and then sending that image to print.
Image img = Image.createImage(816, 40);
Graphics g = img.getGraphics();
g.setColor(0, 0, 0);
g.setFont(Font.getFont(Font.FACE_PROPORTIONAL, Font.STYLE_BOLD,Font.SIZE_LARGE));
g.drawString("Printing test from "
                         + System.getProperty("microedition.platform") + " on "
                         + new Date(), 10, 10, 0);
driver.print(img, btAddr);This code is working fine on this printer.
I am using HP 460cb printer, and I tried the same thing, but am not getting any results. Can any one of you tell me what mistake am I making.
                Image blankImage = Image.createImage(SpotBilling.MAX_IMG_WIDTH, SpotBilling.MAX_IMG_HEIGHT);
                Graphics g = blankImage.getGraphics();
                g.setColor(0,0,0);
                g.setFont(Font.getFont(Font.FACE_PROPORTIONAL, Font.STYLE_PLAIN, Font.SIZE_SMALL));
                g.drawString("Printing test on Wednesday - 18th Jan, 2006", 10, 50, Graphics.TOP|Graphics.LEFT);
                g.drawImage(imgTest, 60, 150, Graphics.HCENTER | Graphics.VCENTER);
                int width = blankImage.getWidth();
                int height = blankImage.getHeight();
                int y = 0;
                os.write(CMD_UNIVERSAL_EXIT);
                for(int i = 1; i<=height; i++){
                         blankImage.getRGB(temp, 0, width, 0, y, width, 1);
                         byte[] pixels = new byte[width];
                         for (int x = 0; x < temp.length; x++) {
                              pixels[x] = (byte) ((((temp[x] & 0x00FF0000) >> 16)
                                   + ((temp[x] & 0x0000FF00) >> 8) + (temp[x] & 0x000000FF)) / 3);
                         // Transfer Raster Graphics
                         os.write(TRANSFER_RASTER_DATA);
                         byte[] len = numToDecimal(pixels.length);
                         os.write(len);
                         os.write(DATA);
                         os.write(pixels);
                         y++;
                    }I have another query, if I can not do this. Is there any way I can create a .jpg image from with in the J2ME application.
I have some text and an image that I get by invoking camera from the code and then capturing a picture. I need to combine them both, and then send it to the printer.
If there is any way, I can convert this blankImage mentioned above (containing both text and Image), please provide me the solution.
Any document or any source code is appreciated.
regards,
Ashish

I have succeeded in creating a mutable image that contains text and image (.png), through
                     Image img;
                     img = Image.createImage(50, 60);
     protected void paint(Graphics g){
          g.drawImage(img, getWidth()/2, getHeight()/2, Graphics.HCENTER | Graphics.VCENTER);
          Graphics graph = img.getGraphics();
          graph.setColor(0, 0, 0);
          graph.setFont(Font.getFont(Font.FACE_PROPORTIONAL, Font.STYLE_BOLD,
                         Font.SIZE_LARGE));
          graph.drawString("Printing test from "
                                   + System.getProperty("microedition.platform") + " on ", 10, 10, 0);
          graph.drawImage(image, img.getWidth()/2, img.getHeight()/2,Graphics.HCENTER|Graphics.VCENTER);
          graph.fillArc(0,0,10,10,0, 360);
     }Now I want to create a .jpg image of this img image(Mutable image).
What I am doing is that,
1. I am converting this image in to int array, using getRGB() method.
2. Then I am converting int array in to byte array.
3. And then I am opening a file(extension is .jpg)
4. Then I am sending this byte array in to the file which is .jpg
The .jpg file is getting created, but the data in it is very absurd, like yyyyyyyyyyyyyyyyyyyyyyyy.
Please help me in this matter.
Regards,
Ashish

I use an iMac 10.6.8 with iPhoto '09 to download digital images from Canon DSLRs. Until the last two weeks there has been no trouble whatever importing images by a USB connection from either camera to the Mac. Now the process will not kick in. Any ideas?

I use an Mac OSX 10.6.8 with iPhoto 09 to download digital images from two Canon DSLRs. Until the last week, there has been no problem whatever in launching the import procedure once the USB connection has been connected and the camera switched on. Now the process will not kick in at all for either camera. I can't find a solution through iPhoto help or from other sources.
Any ideas to fix? (I admit I have not tested the USB cable at this time).

What does "kick in" mean?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

I just upgraded to Lightroom CC5 from 4, and the card will only download 1 image from my recent shoot of 10 images. Why can't I see the other images?

Lightroom 5 will only download one image from my card, when I shot 10. Iphoto doesn't have a problem with it. I never had this problem with Lightroom 4.

Sort by capture time and the images won't be "scattered all over the place".
Just show "NEW" photos in the import.
As Jim said, reformat your card after all your backups are done and verified.

AP unable to download the image from 5508 WLC

Hi,
I have a 5508 WLC connected to 2950 Switch and the LAP 1262 connected to the same default VLAN. My AP's are able to join the controller since they are in the same broadcast domain but They are NOT able to download the image from WLC. When I am looking at the wireless TAB of WLC.. it says... Downloading Image.
Can anyone pls. suggest what all needs to be done to make UP the APs. Also, Following is the error i am seeing at the AP.
*Apr 27 11:48:40.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
*Apr 27 11:48:40.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:48:40.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:48:40.694: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 27 11:48:40.700: capwap_image_proc: problem extracting tar file
*Apr 27 11:48:40.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
*Apr 27 11:48:51.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:48:51.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 27 11:48:51.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:48:51.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
*Apr 27 11:48:51.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 27 11:48:56.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
*Apr 27 11:48:56.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Apr 27 11:48:56.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 27 11:48:56.589: Loading file /ap3g1...
logging facility kern
        ^
% Invalid input detected at '^' marker.
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 27 11:49:44.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
*Apr 27 11:49:44.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:49:44.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:49:44.694: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 27 11:49:44.700: capwap_image_proc: problem extracting tar file
*Apr 27 11:49:44.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
*Apr 27 11:49:54.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:49:54.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 27 11:49:54.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:49:54.572: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
*Apr 27 11:49:54.572: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 27 11:49:59.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
*Apr 27 11:49:59.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Apr 27 11:49:59.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 27 11:49:59.589: Loading file /ap3g1...
logging facility kern
        ^
% Invalid input detected at '^' marker.
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 27 11:50:47.644: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
*Apr 27 11:50:47.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:50:47.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:50:47.697: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 27 11:50:47.697: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
*Apr 27 11:50:47.703: capwap_image_proc: problem extracting tar file
*Apr 27 11:50:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:50:57.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 27 11:50:57.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:50:57.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
*Apr 27 11:50:57.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 27 11:51:02.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
*Apr 27 11:51:02.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Apr 27 11:51:02.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 27 11:51:02.589: Loading file /ap3g1...
logging facility kern
        ^
% Invalid input detected at '^' marker.
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 27 11:51:50.640: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.99:5246
*Apr 27 11:51:50.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:51:50.640: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 27 11:51:50.694: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 27 11:51:50.700: capwap_image_proc: problem extracting tar file
*Apr 27 11:51:50.700: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
*Apr 27 11:52:00.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:52:00.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 27 11:52:00.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.99 peer_port: 5246
*Apr 27 11:52:00.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99
*Apr 27 11:52:00.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 27 11:52:05.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.99perform archive download capwap:/ap3g1 tar file
*Apr 27 11:52:05.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Apr 27 11:52:05.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 27 11:52:05.589: Loading file /ap3g1...
logging facility kern

hi amjad,i am working on the same controller and i upload the image to another AP and cponvert it to LAP. bot this is not registering on controller and behaves like first as first ap is registered and working fine. 2nd ap console output is given below
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 29 10:16:29.644: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.1.59:5246
*Apr 29 10:16:29.644: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:16:29.647: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:16:29.707: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 29 10:16:29.713: capwap_image_proc: problem extracting tar file
*Apr 29 10:16:29.713: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established.
*Apr 29 10:16:40.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.1.59 peer_port: 5246
*Apr 29 10:16:40.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 29 10:16:40.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 192.168.1.59 peer_port: 5246
*Apr 29 10:16:40.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59
*Apr 29 10:16:40.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 29 10:16:45.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59pe
rform archive download capwap:/ap3g1 tar file
*Apr 29 10:16:45.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Do
wnloading image from Controller.
*Apr 29 10:16:45.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 29 10:16:45.589: Loading file /ap3g1...
logging facility kern
        ^
% Invalid input detected at '^' marker.
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 29 10:17:33.647: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.1.59:5246
*Apr 29 10:17:33.647: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:17:33.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:17:33.710: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 29 10:17:33.716: capwap_image_proc: problem extracting tar file
*Apr 29 10:17:33.716: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established.
*Apr 29 10:17:43.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.1.59 peer_port: 5246
*Apr 29 10:17:43.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 29 10:17:43.569: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 192.168.1.59 peer_port: 5246
*Apr 29 10:17:43.569: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59
*Apr 29 10:17:43.569: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...
*Apr 29 10:17:48.571: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.59pe
rform archive download capwap:/ap3g1 tar file
*Apr 29 10:17:48.583: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Do
wnloading image from Controller.
*Apr 29 10:17:48.589: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Apr 29 10:17:48.589: Loading file /ap3g1...
logging facility kern
        ^
% Invalid input detected at '^' marker.
%Error opening flash:/update/info (No such file or directory)
ERROR: Image is not a valid IOS image archive.
archive download: takes 48 seconds
*Apr 29 10:18:36.647: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.1.59:5246
*Apr 29 10:18:36.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:18:36.650: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 29 10:18:36.710: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
*Apr 29 10:18:36.716: capwap_image_proc: problem extracting tar file
*Apr 29 10:18:36.716: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established.
*Apr 29 10:18:46.000: %CAPWAP-5-DTLSRE
pls help

I'm unable to download raw images from my canon 70D to elements 12.?

I'm unable to download raw images from my canon 70D to PH elements 12, downloaded camera raw 8.2 as I saw in a discussion but still unable to convert images. In the "select images" window the images are soft and cannot be selected. What am I doing wrong? Any help?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

How to download RAW images from Canon S100 to iPhoto?

How to download RAW images from Canon S100 to iPhoto?

You need the Raw compatibility update 3.9:
http://support.apple.com/kb/DL1473

How do I create a JPG image from a clip

I need to create a jpg image from a movie clip. Is making a freeze frame the same and creating a jpg?

A jpg image is saved by FCE in a new file, while a freeze frame in FCE is a still picture used for a sequence in a project, but not saved separately.
To make a jpg, position the playhead in the timeline on the frame you want to save and Export/Using QuickTime Conversion and select Format: Still Image.
You are asked for a file name.
To make a freeze frame, position the playhead in the timeline on the frame you want to reuse within the project and Modify/Make Freeze Frame. This leaves a new still in the viewer: you can drag it to the timeline, drag it to the browser, etc.. - However this does not create a separate file but stays embedded in the project where it is used.
Piero

Won't download all images from my sony camera...only 6 out 0f 170, says rest of them are "unreadable j.peg format". Help!

Help! My Mac will not download all images from my Sony digital camera...well, it downloaded 6 out of 170, then said "unreadable j.peg format". This is the second time I have had this problem with this camera. Up to this second time, I have not had a problem with downloading. Now when I plug the camera back in in, it shows empty frames of pix on Mac screen, but pictures are still on the camera. Any suggestions?

See if you can use Image Capture to upload your photos to a folder on the Desktop. Once you have them off the memory card reformat the card using the camera, take some photos and try again.
OT

Downloading raw images from Canon Rebel XTi and problem with Border FX

Aperture no longer downloads raw images from my Canon 400D / Rebel Xti and installed Lexar Professional UDMA card. I am able to download images to my Dell laptop. This is a new phenomenon only occurring since about 10 days ago. I am currently able to download images from my Canon 5D.
Also, my computer has locked up 4 times today when I have been starting Border FX. I have seen a screen saying that I have to restart my computer by holding down the on button. I have the most recent version of the Border FX software.
Any suggestions please?

Join the crowd! I just started to experience exactly the same thing on both of my systems. Apparently the latest raw camera drivers broke something related to Canon Rebel cameras. I'm using the Rebel XT.
I tried a quick experiment the other day. I shot a bunch of test photos forcing the camera to store them as JPEGs. I was able to download those without a problem. I then forced the camera back to raw mode and shot a few more pictures on the same memory card. The JPEGs that I was able to download previously no longer will download and neither will the raw files.
I tried reverting to the older camera raw driver on my notebook but for some reason it won't let me do that. I haven't tried reverting on the desktop yet.
Hopefully this problem is fixed quickly. I've got a ton of pictures from a recent vacation I'd like to off load.
By the way, this affects the iPhoto, Aperture and Image Capture apps.

Why wont jpg images from macbook open on Windows PC?

I have loaded jpg images from my nikon camera into iphoto on macbook pro.
No editing was done.
Then i copied then to a usb and attempted to open on a windows pc .
They wont open in either windows or photoshop on windows pc.
Can you help please?
Many thanks
Dell.

You may be burning the disk as a data CD. Make sure that you're burning the disk as an Audio CD (iTunes Burning preference). You can also burn an MP3 CD if your tracks are in MP3 format and your player will handle an MP3 disk.
Hope this helps.

Download .jpg image from Network Analyzer 8722es to PC

Similar Messages

Maybe you are looking for