Download pdf into MDM server.

please if any 1 can give me the code to download pdf into MDM server.its urgent

Hi, Utkarsh,
If you are trying to load pdf files, this forum mentions how to do it using the Data Manager. Re: Uploading PDF in Data Manager
Or are you looking to do it with the JAVA APIs?

Similar Messages

How to download pdf from application server

hi all,
anybody has code to download pdf from application server to presentation server.
right now i get the pdf file on to the desktop but i get error on opening.
gui_download gives error if i use xstring.
pl advice.
thanks.
sap fan.

Hi,
use the below code to download file from app server to presentation server
PARAMETERS: S_file TYPE SAPB-SAPPFAD
default '\folder1\abc,pdf'.
PARAMETERS: t_lfile TYPE SAPB-SAPPFAD
default 'c:\temp\xyx.pdf'.
START-OF-SELECTION.
CALL FUNCTION 'ARCHIVFILE_SERVER_TO_CLIENT'
    EXPORTING
      path             = source_file
     TARGETPATH        = target_lfile
EXCEPTIONS
   ERROR_FILE       = 1
   OTHERS           = 2
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Special characters downloading file into application server

Dear Friends,
i have to download records into excel sheet through back ground job, while downloading records into applications server.
all records are downloading properly up to here fine but some special characters also downloading. i had downloaded same records in debugging mode from the same internal table here no special characters.
i found that the structure(standard ( /SCWM/S_LIME_ALL_MON )) which is being used in that some fields are defined as RAW data type this may be the problem.but i tried to convert them using some function modules no result getting dump only.
i am using data sets to download data into application server here gui_download will not work because it is back ground job.
can any one please help me in this. its urgent...
please please help me in this it has been pending since DEC-01-11.
extra characters like ( #v#M?LQia#####
#v#M?LQia#####
#v#)
my code
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
    LOOP AT LT_TAB INTO WA_TAB.
      transfer WA_TAB to LV_FLNAM.
    ENDLOOP.
    CLOSE DATASET LV_FLNAM.
ENDIF.
Edited by: sairam.kusuma on Dec 16, 2011 6:26 AM
Edited by: sairam.kusuma on Dec 16, 2011 6:38 AM
Edited by: sairam.kusuma on Dec 16, 2011 6:39 AM

TYPES:BEGIN OF ty_stru,
      LGTYP TYPE /SCWM/LGTYP,
      LGPLA TYPE /SCWM/LGPLA,
      MATNR TYPE /SCWM/DE_MATNR,
      MAKTX TYPE /SCWM/DE_UI_MAKTX,
      QUAN(13) TYPE C,"/SCWM/DE_UI_QUAN,
      UNIT TYPE /SCWM/DE_BASE_UOM,
      CAT TYPE /SCWM/DE_CAT,
      CAT_TXT TYPE /SCWM/DE_CAT_TXT,
      CHARG TYPE /SCWM/DE_CHARG,
      OWNER TYPE /LIME/OWNER,
      ENTITLED TYPE /SCWM/DE_ENTITLED,
      UI_WDATT TYPE /SCWM/DE_UI_WDATT,
      UI_WDATU TYPE /SCWM/DE_UI_WDATU,
      SKZSI TYPE /SCWM/LQUA_SKZSI,
      QUANA(13) TYPE C,"/SCWM/DE_UI_QUAN_PACKED,
      ALTME TYPE /SCWM/DE_AUNIT,
      ITMNO TYPE /SCDL/DL_ITEMNO,
      WEIGHT(15) TYPE C,"/SCWM/DE_NWEIGHT,
      UNIT_W TYPE /SCWM/DE_WGT_UOM,
      VOLUM(15) TYPE C,"/SCWM/DE_NVOLUME,
      UNIT_V TYPE /SCWM/DE_VOL_UOM,
      CAPA(15) TYPE C,"/SCWM/DE_CAPAUSE,
      SN_STOCK TYPE /SCWM/DE_SER_STOCK,
      END OF ty_stru.
DATA: LV_LGNUM TYPE /SCWM/LGNUM VALUE 'R10',
      LV_FLNAM TYPE rlgrap-filename VALUE '/tmp/RAMA.xls'.
CONSTANTS: C_ZERO TYPE I VALUE '0'.
DATA: LT_TAB TYPE STANDARD TABLE OF /SCWM/S_LIME_ALL_MON,
      WA_TAB TYPE /SCWM/S_LIME_ALL_MON,
      i_stru TYPE STANDARD TABLE OF ty_stru,"
      wa_stru TYPE ty_stru.
REFRESH LT_TAB.
CLEAR: WA_TAB.
*this is modified function module from /SCWM/S_LIME_ALL_MON
CALL FUNCTION 'ZEWM_F_PHYSICAL_INVENTORY_STOC'
EXPORTING
    IV_LGNUM             = LV_LGNUM
IV_VARIANT           =
IV_MODE              = '1'
IT_DATA_PARENT       =
IMPORTING
    ET_DATA              = LT_TAB
EV_RETURNCODE        =
EV_VARIANT           =
CHANGING
CT_TAB_RANGE         =
i have to download what are the fields defined as structure.
1)when ever i am using the internal table(LT_TAB) to download getting specials characters(####) with all records for the fields QUAN, QUANA, WEGHT,VOLUM and CAPA.
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
CLEAR: WA_stru,
         wa_tab.
LOOP AT LT_TAB INTO WA_TAB.
    transfer WA_TAB to LV_FLNAM.
    CLEAR: WA_TAB.
ENDLOOP.
CLOSE DATASET LV_FLNAM.
ENDIF.
2)if i take another internal table with converting them as char file is downloading with out special characters but it is downloading single line only but not the hole data.
if i have the below code getting only single line records not total records without special characters.
open DATASET LV_FLNAM for OUTPUT in LEGACY BINARY MODE .
IF sy-subrc EQ C_ZERO.
CLEAR: WA_stru,
         wa_tab.
LOOP AT LT_TAB INTO WA_TAB.
     wa_stru-LGTYP = wa_tab-LGTYP.
     wa_stru-LGPLA = wa_tab-LGPLA.
     wa_stru-MATNR = wa_tab-MATNR.
     wa_stru-MAKTX = wa_tab-MAKTX.
     wa_stru-QUAN = wa_tab-QUAN.
     wa_stru-UNIT = wa_tab-UNIT.
     wa_stru-CAT = wa_tab-CAT.
     wa_stru-CAT_TXT = wa_tab-CAT_TXT.
     wa_stru-CHARG = wa_tab-CHARG.
     wa_stru-OWNER = wa_tab-OWNER.
     wa_stru-ENTITLED = wa_tab-ENTITLED.
     wa_stru-UI_WDATT = wa_tab-UI_WDATT.
     wa_stru-UI_WDATU = wa_tab-UI_WDATU.
     wa_stru-SKZSI = wa_tab-SKZSI.
     wa_stru-QUANA = wa_tab-QUANA.
     wa_stru-ALTME = wa_tab-ALTME.
     wa_stru-ITMNO = wa_tab-ITMNO.
     wa_stru-WEIGHT = wa_tab-WEIGHT.
     wa_stru-UNIT_W = wa_tab-UNIT_W.
     wa_stru-VOLUM = wa_tab-VOLUM.
     wa_stru-UNIT_V = wa_tab-UNIT_V.
     wa_stru-CAPA = wa_tab-CAPA.
     wa_stru-SN_STOCK = wa_tab-SN_STOCK.
    transfer WA_stru to LV_FLNAM.
    CLEAR: WA_stru.
ENDLOOP.
CLOSE DATASET LV_FLNAM.
ENDIF.

Uploading & Downloading Files into DMS Server using Web Dynpro Java

Hello Friends,
      I want to Upload a file from Portal to Document Management Server and to Download a file from Document Management Server to Portal, In short, I want to give the user the facility to Upload a File into DMS Sever via Portal and also to download the file from DMS Sever via Portal.
Can anybody give me a Input for the same from Both Java Development End as well as ABAP End, more inputs are required from ABAP end, since i have a very less ABAP Experience on working with DMS. Few Questions i have in my mind?
1. How to actually access the file contents with the help of Document Number?
2. With the help of Doc-Number we can extract the file from DMS sever but to provide a option for downloading in portal, the   RFC should convert the File Contents into X-String or is there some other way?
+3. While Uploading the Data should be given in Which format to RFC? Are there any limitation with respect to size or formats. Is there any Standard RFC i can use directly in WD4 Java application to upload the file into DMS Server and which will return me the Document Number? +
Please give me your valuable inputs.
Thank You.
Edited by: TusharShinde on Feb 21, 2011 11:13 AM
Now, I am able to download the File in Portal via my WD4 Java Application from DMS Server by passing the Document Number, but I am facing the problem in downloading the PDF files, Its not working for PDF files. Please give me inputs for the same.
Thank You.
Edited by: TusharShinde on Feb 22, 2011 10:13 AM

HI,
Thanks for reply.
I am able to download the file From DMS server but I am still not able to Upload the File to DMS Server via Portal. For Download also it is working for all file formats but not for PDF any specific reason for the same.
function zhrf_rfc_dms_download_document.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(LV_DOCUMENT) TYPE DOKNR
*" EXPORTING
*"     VALUE(LV_FADA) TYPE XSTRING
*" TABLES
*"      LT_DOC STRUCTURE BAPI_DOC_FILES2
*"      LT_OUT STRUCTURE ZST_DMS_FILE_XSTRING
data: ls_docfiles type bapi_doc_files2,
         ls_dms type dms_doc_files,
         lt_docfiles type standard table of bapi_doc_files2.
*      data: LT_OUT type table of ZST_DMS_FILE_XSTRING.
data :wa_out like line of lt_out.
select single * from dms_doc_files
    into ls_dms
    where doknr = lv_document."Retrieve file
if sy-subrc = 0.
    ls_docfiles-documenttype = ls_dms-dokar.
    ls_docfiles-documentnumber = lv_document.
    ls_docfiles-documentpart = ls_dms-doktl.
    ls_docfiles-documentversion = ls_dms-dokvr.
*    ls_docfiles-documenttype = '321'.
*    ls_docfiles-documentnumber = LV_DOCUMENT.
*    ls_docfiles-documentpart = '000'.
*    ls_docfiles-documentversion = 'A0'.
endif.
call function 'BAPI_DOCUMENT_CHECKOUTVIEW2'
    exporting
      documenttype    = ls_docfiles-documenttype
      documentnumber = ls_docfiles-documentnumber
      documentpart    = ls_docfiles-documentpart
      documentversion = ls_docfiles-documentversion
      documentfile    = ls_docfiles
      getstructure    = '1'
      getcomponents   = 'X'
      getheader       = 'X'
*      pf_http_dest    = 'SAPHTTPA'
      pf_ftp_dest     = 'SAPFTPA'
    tables
      documentfiles   = lt_docfiles.
data: i_bin type standard table of sdokcntbin,
        i_info type standard table of scms_acinf,
        v_info type scms_acinf,
        v_id type sdok_phid,
        v_cat type sdok_stcat.
if sy-subrc = 0.
    loop at lt_docfiles into ls_docfiles.
      v_id = ls_docfiles-docfile.
      v_cat = ls_docfiles-storagecategory.
      call function 'SCMS_DOC_READ'
        exporting
          stor_cat              = v_cat
          doc_id                = v_id
          phio_id               = ls_docfiles-file_id
        tables
          access_info           = i_info
          content_bin           = i_bin
        exceptions
          bad_storage_type      = 1
          bad_request           = 2
          unauthorized          = 3
          comp_not_found        = 4
          not_found             = 5
          forbidden             = 6
          conflict              = 7
          internal_server_error = 8
          error_http            = 9
          error_signature       = 10
          error_config          = 11
          error_format          = 12
          error_parameter       = 13
          error                 = 14
          others                = 15.
    endloop.
    if sy-subrc <> 0.
    else.
      data: v_xstring type xstring.
      read table i_info into v_info index 1.
      call function 'SCMS_BINARY_TO_XSTRING'
        exporting
          input_length = v_info-comp_size
        importing
          buffer       = v_xstring
        tables
          binary_tab   = i_bin
        exceptions
          failed       = 1
          others       = 2.
      if sy-subrc <> 0.
      endif.
    endif.
    wa_out-file_name = ls_docfiles-docfile.
    wa_out-binary = v_xstring.
    lv_fada = v_xstring.
    append wa_out to lt_out.
endif.
endfunction.
The above is the RFC Code, I am using in my WD4Java app for downloading the file From DMS Server, Is there any Improvement suggested for above RFC to make it work in more efficient way. Please give me input for my Upload RFC.
Thank You.

Can't upload pdf into cloud server

I'm unable to upload a 12mb pdf into the cloud server. I've tried drag and drop and the upload button. I've signed out and signed back in but still nothing. The file opens fine on my computer so it doesn't seem corrupt. I'm on a Mac and I'm using Chrome. Has anybody else experienced this before?

Are you able to upload other files? Which OS and browser are you using?
You can examine the network traffic in your browser. Each browser differs a bit, but here is an example with Chrome. From the Chrome menu choose View > Developer > Developer Tools. A window will open in the bottom half of the browser. Select the Network tab and then try the file upload action. You will see a bunch of items but should get a POST call with a 201 return code. Here is a screen shot:
If there is an error you will see a different return code. Possibly you might see no return codes at all.
So please reply with your OS and browser, and a screen shot of what you are seeing. Let me know if you can upload a different file than the PDF. Also I am happy to post instructions for doing this with a different browser if needed.

Upload Images and PDFs into MDM through UI

Hi All,
I have a requirement where in we need to perform a mass upload of Images and PDFs into the respective tables of MDM through a UI.
It is like, I browse the files through UI and click on Upload button, all those Images and PDFs should be uploaded in MDM.
Is this a possible scenario? I have searched through sdn but could find no information pertaining to it.
Please let me know if this is a possible scenario and provide some links to any documents related to it.
TIA,
Sravan

upload of images and pdfs are dome from the data manager in MDM.
ideally whatever u do in the DM is possible to be achieved by using the MDM APIs.
so in ur UI (Webdynpro/ Java) u should call the APIsfor upload to the respective tables and its very much possible.
check the MDM API list for more details.
thanks
-Adrivit

Download pdf into browser, object not stored in wwv_flow_files

Was wondering if you’re able to help? I want to view a pdf I’ve stored in a blob column via APEX.
I can view pdf’s I’ve uploaded and stored via apex i.e. stored in wwv_flow_files, but not objects stored in other tables.
To help see what I’m doing I will detail the way I can get working (Via Apex)
Scenario via apex:
create table demo.apex_document_upload(
name varchar2(90),
load_date date,
load_user varchar2(100));
Create upload page
Using a HTML region
I insert a button called upload with a branch to page of &APP_PAGE_ID.
Create a file browse item
Add a page process plsql to run on upload button
begin
insert into demo.apex_document_upload (name,load_date,load_user )
values (:P9_FILE_NAME,sysdate, :app_user);
end;
Run page and upload a pdf document.
Create PDF Apex View page
Create a reports page using below sql code.
select
wff.id, lf.load_date, lf.load_user, wff.filename PDF_FILE
from
wwv_flow_files wff, demo.apex_document_upload lf
where
wff.name = lf.name;
Edit the report attributes and go into the pdf_file link attributes:
Set
link text = #PDF_FILE#
target=URL
url=p?n=#ID#&p_inline=YES
Run the report page click on the link and the pdf should be launched.
Issue
Issue I want to store the images in the user’s schema and load the images in bulk, I have over 100,000 pdfs to load and do not want to do this one at a time.
I can load the images into Oracle OK using below:
The issue with this is that the blob is stored in the wwv_flow_files table and you have to laod one image at a time. I’m looking at loading on 100k of images so this is not practical.
So I was wanting to load the images via sqlldr
create table demo.schema_document_upload
name varchar2(100),
file_name varchar2(100),
file_image blob,
load_date date)
sqlldr controlfile
load_bulk_pdf.ctl
load data
infile *
append
into table demo.schema_document_upload
FIELDS TERMINATED BY ','
Name CHAR
, file_name CHAR
, file_image LOBFILE(file_name)
TERMINATED BY EOF
NULLIF file_name='NONE'
, load_date SYSDATE
begindata
image1,00000002.pdf
image2, 00000006.pdf
image_3,0000000A.pdf
This loads the PDF’s into the demo.schema_document_upload table, but I’ve been unable to get APEX to open these PDF’s.
Has anyone tried this before?

Hello dtt676 (Tip for you, put your name in your profile) :-)
Here's how I do it...
1)Create a stored procedure (Standalone or as a part of a package as appropriate) like this...
PROCEDURE get_pdf (p_pdf_id IN NUMBER) IS
    v_blob       BLOB;
    l_length     NUMBER;
    v_mime_type VARCHAR2(30);
    v_file_name VARCHAR2(200);
BEGIN
    -- get pdf_data and its mime type from the database
    SELECT a.pdf
          ,a.mimetype
          ,a.filename
    INTO   v_blob
          ,v_mime_type
          ,v_file_name
    FROM   pdf_table a
    WHERE a.pdf_id = p_pdf_id;
    l_length := dbms_lob.getlength(v_blob);
    owa_util.mime_header(v_mime_type, FALSE);
    htp.p('Content-length: ' || l_length);
    htp.p('Content-Disposition: filename="' || v_file_name || '"');
    owa_util.http_header_close;
    wpg_docload.download_file(v_blob);
    EXCEPTION
      WHEN OTHERS THEN
           RAISE_APPLICATION_ERROR(-20001, 'Error: '                || SQLERRM
                                   ||'. p_pdf_id: ' || p_pdf_id
END get_pdf;2) In "Shared Components", create an "Application Process" of type "On Demand" type "PL/SQL Anonymous Block" called GET_PDF with the following 'Source'
BEGIN
get_pdf(p_pdf_id => &P1_PDF_ID.);
END;3) Make sure your target page for displaying your PDF has an item containing the unique ID of the stored PDF you want to display, an item containing the mimetype and an item containing the filename.
4) create an HTML Region on the page you want to display your PDF with the following in the region source.
<iframe src="f?p=&APP_ID.:1:&APP_SESSION.:APPLICATION_PROCESS=GET_PDF" width="800" height="1000" name="&P1_FILENAME." type="&P1_MIMETYPE."></iframe>You will need to set the page IDs to the relevant page for your application and you'll need to set the item names to those you're using in your database but, assuming you have your PDFs stored in a BLOB column, this should do the trick.
Please feel free to come back to me if you have any questions.
Kind regards
Simon Gadd

Sync my downloaded PDFs into iTunes

How do I do this? Before syncing, iTunes gave me a warning say that all books would be overwritten and I take that to mean PDFs I have downloaded as well.

Hi..
Help here > iOS: Syncing with iTunes

Can not Upload PDF in MDM data repository

Hi, expert,
when I upload the PDF in MDM data manager, the system error log is :
Unable to open Adobe Acrobat.
See your administrator about installing Adobe Acrobat.
But, when I upload the image, the status is success..
I do not know if it is Adobe Acrobat installing problem or I miss some configuration or it can not upload the PDF into MDM repository..
Your help would be really appreciated.
thanks & Best Regards,

Hi,
Can you open the PDF without any error? Is Adobe Acrobat installed on the server where the repository is loaded?
Regards,
jason

Open Hub Destination and MDM server

Dear colleagues,
Does anybody have the experience of creating OHD with MDM Tech (for pushing data into MDM server)?
I've got the problem of activation my created OHD.
I have tried to connect to MS SQL Server and Oracle server
I think that i don't understand the prerequisites.
Could please advise me my mistakes? What are the configurations of BW and MDM server?
I would be pleased if you write me to my addres

HI
May be this doc helps you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/368ed888-0701-0010-aa94-b21cfebe4eee
https://websmp210.sap-ag.de/~sapidp/011000358700001612132004E.pdf
https://www.sdn.sap.com/irj/scn/articles-mdm-all?prtmode=print&startindex=241
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3065806b-dce5-2a10-1493-c933ac8daca5

How do I download PDF files from Safari 5.0.5?

I am unable to open PDF files. All I get is a blank black screen. I now download PDFs into my computer from the internet (with mixed success), which is several steps more than has ever taken me in the past.
Since finding this problem I have updated the Adobe Reader and run system updates today, to no avail.
Adobe reports that there is a compatibility issue between Safari 5.1 and Adobe Reader. They offer several solutions none of which has worked for me.
(http://helpx.adobe.com/x-productkb/multi/safari-5-1-incompatible-reader.html). Is updating Safari going to help me, or are there other solutions?

Hi..
Go to HD/Library/Internet Plug-Ins
Move the Adobe PDF browser plugin from the Internet Plug-Ins folder to the Trash..
Quit and relaunch Safari to test.
If you have trouble finding that file..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Internet Plug-Ins
Click Go
edited by: cs

Viewing PDF in MDM Catalog

Hi Gurus,
I have imported PDF into MDM successfully. Unfortunately when i browse thru the MDM catalog, i able to see a whole string of file link information and cannot view the PDF.
Anyone knows the PDF viewing works in catalog view?
Many thanks,
GG

Hi Adrivit,
Unfortunately I do not agree with your last suggestion i.e. changing the field type/length. Below are my thoughts:
1. Once the field is defined and saved in MDM then in most of the cases system doesn't allow to update the Field type. Yes, for some field types it allows, but very minimal options will be available. This field is defined as "Text" field with 250 characters. By design, MDM System won't allow you to change this field to any other field type. Yes, MDM will allow you to change it to "text normalized", but that won't help in this case, as text normalized also got same length restriction.
2. Maximum length restriction of a text field is 333 characters.
3. In SRM-MDM Catalog scenario, I do not consider it a best practice to change the standard fields/tables, especially when we don't know impact of the change on standard SRM-MDM Search UI and Catalog UI applications.
Glen,
if your URLs are too long then I can think of only two ways:
1. Copy your PDF from old location to new location (if it shortens the Path URL)
OR
2. Use some free URL generators to shorten the long URLs.
In case none of above solution is feasible for you, then Please check with SAP on this before making any change in the repository.
-Shiv

Adobe Reader 9.0 has delay when downloading PDF file through proxy server

There is an issue with the Adobe Reader (and Acrobat) 9.0 PDF Link Helper ActiveX control for Internet Explorer (6 or 7) on Windows computers with respect to proxy servers. Due to this issue, there is a 2 minute delay for any Internet Explorer web browser on the Deere network before any PDF file will open from the Internet within the IE web browser if In-Place activation (Display PDF in Browser) is enabled in Adobe Reader 9. This problem does not affect Adobe Reader 8.
What we are seeing is that when someone on the Deere network clicks on a links to a PDF file in the Internet, the PDF file downloads immediately. But then, after the PDF file is downloaded, the Adobe Reader 9 PDF Link Helper ActiveX control tries to talk directly to the Internet web site. The Adobe Reader 9 PDF Link Helper ActiveX control does not know how to negotiate our proxy server. So after a minute or two, the Adobe Reader 9 PDF Link Helper ActiveX control times out (gives up) and allows the IE browser to display the downloaded PDF file in the IE browser.
We work around this issue by disabling In Place Activation for PDF files in IE (uncheck Display PDF in Browser). But we would like a fix for the PDF Link Helper ActiveX control.
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals]
"bBrowserIntegration"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Originals]
"bBrowserIntegration"=dword:00000000
Here's what our proxy people see when they do a trace of a PDF file download through their proxy server with IE 7 and Adobe Reader 9 with Display PDF in Browser checked.
The browser tells the proxy to download the pdf, it does and sends it to the browser. Before the browser opens it something in Acrobat ( or I.E. ? ) tries to make a connection back to the content server that hosted the pdf. Unfortunately this agent does not ask the proxy to make the request for it, but rather asks local DNS to resolve the Internet server name. This request dies because our internal private network does not know anything about the Internet. Only the DNS used by the proxy can resolve Interent names. After two unsuccessful DNS queries into the private network, the agent tries to resolve the same Internet name with NBNS ( netbios name service) queries again into the private network, with the same results. These requests persists for more than two minutes ( over 200 unresolved queries ). Then for whatever reason the agent gives up and the already downloaded pdf file loads into the browser.
I have a TCP capture file if you want it.

Hi,
I have the same problem with some specific PDF files. For more than 90% it hangs when opening the file, but sometimes it works (with the same file).
The workflows where it sometimes worked:
a) Loading the PDF, the reader is started the first time and displays license dialog.
b) The reader was already runing and file is loaded with Drag&Drop or File/Open in the Reader
But most times it does not load.
I could not find out which file is missing or trying to be opened. So I tried with the CP949.TXT.
I found no CP949.TXT in Reader 8 installation, so I took it from the link, pasted into notepad and stored in the respective directory
C:\Program Files (x86)\Adobe\Reader 9.0\Resource\TypeSupport\Unicode\Mappings\win\
Now it seems to work fine, opening PDFs with double click from exporer.
But why did Adobe Reader 8 not have the TypeSupport directory at all?
Even when having found a fix (hack?), I think I did not understand the cause of this problem.
Regards,
TheLastReader

Error in PDF Conversion while downloading file from application server

Hi,
I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
* event handler for data retrieval
EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
YEAR = REQUEST->GET_FORM_FIELD( 'yr' ).
W_IND = 'N' .
DATA : wa_zform16 type zform16.
DATA : file_path type string.
DATA : l_pdf_len type string.
DATA STR TYPE STRING.
DATA: OUTPUT    TYPE STRING ,
      L_XSTRING TYPE XSTRING ,
      APP_TYPE TYPE STRING.
DATA: PDF_TABLE TYPE RCL_BAG_TLINE.
DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF' into file_path
*PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
PHY_NAME_OUT = file_path.
OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
IF SY-SUBRC IS INITIAL.
DO.
    READ DATASET PHY_NAME_OUT INTO STR.
    IF SY-SUBRC IS INITIAL.
      CONCATENATE
          OUTPUT
          STR
          CL_ABAP_CHAR_UTILITIES=>CR_LF
      INTO OUTPUT.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
APP_TYPE = 'APPLICATION/PDF'.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT     = OUTPUT
            MIMETYPE = 'APPLICATION/PDF'
*            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
    IMPORTING
      BUFFER   = L_XSTRING.
CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
    EXPORTING
      OBJECT_S            = L_XSTRING
      CONTENT_TYPE        = APP_TYPE
      CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
      RESPONSE            = _M_RESPONSE
      NAVIGATION          = NAVIGATION.
Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
Can anyone please help me in this regard.
or is there any possibility from which i can download that file just like File transfer from BSP.
Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
waiting for your reply.....
Regards,
Gagan

Hi Raja,
I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
Regards,
Gagan

Download PDF file from Application Server in BSP

Hello,
We have a requirement on which we want to download a PDF file stored in Application server using BSP application. I have used function module ARCHIVFILE_SERVER_TO_CLIENT but this FM will help only if i want to download file from GUI it won't work in BSP application.
Further i have used class CL_BSP_UTILITY and download method to download file from application server but it is not working in desired manner.
I am attaching my code for your reference:
DATA: BUTTON_EVENT TYPE REF TO CL_HTMLB_EVENT_BUTTON ,
           EVENT TYPE REF TO IF_HTMLB_DATA.
DATA: LS_HOURS LIKE LINE OF GT_HOURS.
DATA STR TYPE STRING.
DATA: OUTPUT TYPE STRING ,
          L_XSTRING TYPE XSTRING ,
           APP_TYPE TYPE STRING.
EVENT = CL_HTMLB_MANAGER=>GET_EVENT( REQUEST ).
DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
IF EVENT IS NOT INITIAL AND EVENT->EVENT_NAME = HTMLB_EVENTS=>BUTTON .
BUTTON_EVENT ?= EVENT .
CASE EVENT->EVENT_SERVER_NAME.
    WHEN 'test' .
      IF GT_HOURS IS NOT INITIAL.
        PHY_NAME_OUT = '/usr/sap/put/form16//01000200_2007.PDF'.
      OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        IF SY-SUBRC IS INITIAL.
          DO.
            READ DATASET PHY_NAME_OUT INTO STR.
            IF SY-SUBRC IS INITIAL.
            CONCATENATE
                OUTPUT
                str
                cl_abap_char_utilities=>cr_lf
INTO output SEPARATED BY space. "cl_abap_char_utilities=>horizontal_tab
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
*LOOP AT gt_hours INTO ls_hours.
*CONCATENATE
*OUTPUT
*ls_hours-hour
*cl_abap_char_utilities=>cr_lf
*INTO output SEPARATED BY space. "cl_abap_char_utilities=>horizontal_tab
*ENDLOOP.
        APP_TYPE = 'APPLICATION/PDF;charset=utf-16le'.
        CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
          EXPORTING
            TEXT     = OUTPUT
            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
          IMPORTING
            BUFFER   = L_XSTRING.
        CONCATENATE CL_ABAP_CHAR_UTILITIES=>BYTE_ORDER_MARK_LITTLE
        L_XSTRING
        INTO L_XSTRING IN BYTE MODE.
        CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
        EXPORTING
        OBJECT_S = L_XSTRING
        CONTENT_TYPE = APP_TYPE
        CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
        RESPONSE = _M_RESPONSE
        NAVIGATION = NAVIGATION.
      ENDIF.
ENDCASE.
ENDIF.
From this code i am able to download PDF file but it is not opening in local machine.
If any other way to download file then please suggest.
waiting for ur reply.
Regards,
Gagan

Hi,
you do the file reading wrong:
have a look at:
Local declarations.
data:
    components          type stringtab,
    component           type string,
    path                type text255,
    file                type text255,
    line_length         type i,
   filecontent_binary type sdokcntbin,
    rows                type sytabix,
    content             type sdokcntbin,
    exception           type ref to cx_sy_file_access_error,
    exception_tmf       type ref to cx_sy_too_many_files ,
    block_size          type i value 1022,
    length              type i.
field-symbols:
    <hex_container>     type x.
constants:
    c_dms_blk_size      type i value 2550.
clear file_size.
try.
      open dataset file_name for input in binary mode message message.
    catch cx_sy_file_open into exception.
      case exception->textid.
        when '4182174D03030063000000000A1551B1'. raise access_error.
        when '41825AD355C3005E000000000A1551B1'. raise open_error.
        when '47E8B03AECE5BA07E10000000A114829'. raise already_open.
        when others.
      endcase.
    catch cx_sy_file_authority into exception.
      case exception->textid.
        when '4182174D03030063000000000A1551B1'. raise access_error.
        when 'A70BB8396F051547E10000000A11447B'. raise authority_error.
        when others.
      endcase.
    catch cx_sy_too_many_files into exception_tmf.
      case exception_tmf->textid.
        when '8708B73915F6B645E10000000A11447B'. raise too_many_files.
        when others.
      endcase.
endtry.
do.
    try.
        read dataset file_name into filecontent_binary-line.
        if sy-subrc <> 0.
          add line_length to file_size.
          append filecontent_binary to file_content_binary.
          exit.
        else.
          add line_length to file_size.
          append filecontent_binary to file_content_binary.
        endif.
      catch cx_sy_file_open_mode into exception.
        case exception->textid.
          when '9207B73915F6B645E10000000A11447B'. raise cx_sy_file_open_mode.
          when '9807B73915F6B645E10000000A11447B'. raise read_only.
          when '9E07B73915F6B645E10000000A11447B'. raise not_open.
          when '409D273A2D824360E10000000A11447B'. raise incompatible_mode.
          when others.
        endcase.
    endtry.
enddo.
try.
      close dataset file_name.
    catch cx_sy_file_close into exception.
      case exception->textid.
        when '4182174D03030063000000000A1551B1'. raise access_error.
        when 'C10BB8396F051547E10000000A11447B'. raise close_error.
        when others.
      endcase.
    catch cx_sy_file_access_error into exception.
      case exception->textid.
        when '4182174D03030063000000000A1551B1'. raise access_error.
        when others.
      endcase.
endtry.
Get file size.
split file_name at '/' into table components.
describe table components lines sy-tfill.
read table components into component index sy-tfill.
path = file_name.
replace component in path with ''.
file = component.
call function '/EUH/MMS_GET_FILE_SIZE'
    exporting
      dir_name = path
      file_name = file
    importing
      file_size = file_size.
and function /euh/mms_get_file_size.
""Local Interface:
*" IMPORTING
*"     VALUE(DIR_NAME) TYPE TEXT255
*"     VALUE(FILE_NAME) TYPE TEXT255
*" EXPORTING
*"     VALUE(FILE_SIZE) TYPE SDOK_FSIZE
*" EXCEPTIONS
*"      NO_AUTHORITY
*"      ACTIVITY_UNKNOWN
*"      NOT_A_DIRECTORY
*"      NO_MEDIA_IN_DRIVE
*"      TOO_MANY_ERRORS
*"      TOO_MANY_FILES
*"      BRACKET_ERROR_IN_FILENAME
*"      NO_SUCH_PARAMETER
types: begin of files,
           line like ocs_file,
         end of files.
data: file type files,
     f_subrc like sy-subrc value 0,
     errno(3)    type c,
     errmsg(40) type c,
     pos                        type i,
     len                        type i,
     parameter(120)             type c,
     help1(120)                 type c,
     help2(120)                 type c,
     error_counter              type i.
data:
    dir_list like ocs_file occurs 0 with header line.
CASE sy-subrc.
   WHEN 1. f_subrc = 64.
   WHEN 2. f_subrc = 65.
   WHEN 0.
search dir_name for 'SY-HOST'.    "Is SY-HOST used in directory name?
if sy-subrc = 0.
    pos = sy-fdpos + 7.
    move dir_name(sy-fdpos) to help1.
    move dir_name+pos to help2.
    concatenate help1 sy-host help2 into dir_name.
endif.
do 12 times.                                 " To avoid endless loop
    if dir_name cs '$('.           " Replace parameter by their value
      pos = sy-fdpos + 2.
      if dir_name cs ')'.
        len = sy-fdpos - pos.
        if len le 0.
          f_subrc = 4. exit.
        else.
          parameter = dir_name+pos(len).
          call 'C_SAPGPARAM' id 'NAME' field parameter
                           id 'VALUE' field parameter.
          if sy-subrc = 0.
            len = pos + len + 1.
            pos = pos - 2.
            if pos > 0.
              move dir_name(pos) to help1.
            else.
              help1 = ''.
            endif.
            pos = strlen( dir_name ).
            if pos > len.
              move dir_name+len to help2.
            else.
              help2 = ''.
            endif.
            concatenate help1 parameter help2 into dir_name.
          else.
            f_subrc = 8. exit.
          endif.
        endif.
      else.
        exit.
      endif.
    else.
      exit.
    endif.
enddo.
shift dir_name right deleting trailing '/\ '.
shift dir_name left deleting leading space.
call 'C_DIR_READ_FINISH'                      " this is from RSWATCH0
        id 'ERRNO' field errno
        id 'ERRMSG' field errmsg.
call 'C_DIR_READ_START'
        id 'DIR'    field dir_name
        id 'FILE'   field file_name
        id 'ERRNO' field errno
        id 'ERRMSG' field errmsg.
case sy-subrc.
    when 1.
      case errno.
        when 2 or 20. f_subrc = f_subrc + 66.
        when ' '. f_subrc = f_subrc + 67.
      endcase.
    when 0.
      clear error_counter.
      do.
        clear file.
        clear dir_list.
        call 'C_DIR_READ_NEXT'
            id 'TYPE'   field file-line-type
            id 'NAME'   field file-line-name
            id 'LEN'    field file-line-len
            id 'OWNER' field file-line-owner
            id 'MTIME' field file-line-mtime
            id 'MODE'   field file-line-acc_mode
            id 'ERRNO' field errno
            id 'ERRMSG' field errmsg.   "sy-subrc = 3 is e.g. if return
        if sy-subrc = 0 or sy-subrc = 3."data do not fit into variables
          perform p6_to_date_time_tz(rstr0400) using
                file-line-mtime
                file-line-mod_time
                file-line-mod_date.
          file_size = file-line-len.
          dir_list = file-line.
          append dir_list.
        elseif sy-subrc = 1.                 " nothing (more) found
          exit.
        else.
          if error_counter > 50.
            call 'C_DIR_READ_FINISH'
                id 'ERRNO' field errno
                id 'ERRMSG' field errmsg.
            pos = f_subrc mod 2.
            if pos = 0. f_subrc = f_subrc + 1. endif.
            exit.
          endif.
          add 1 to error_counter.
        endif.
        if sy-index > 1000.
          pos = f_subrc mod 4.
          if pos = 0. f_subrc = f_subrc + 2. endif.
          exit.
        endif.
      enddo.
      call 'C_DIR_READ_FINISH'
           id 'ERRNO' field errno
           id 'ERRMSG' field errmsg.
      if sy-opsys(3) = 'Win' and not ( file_name cs '*' ).
        describe table dir_list lines len.
        if len = 0.
          help1 = file_name.
          translate help1 to upper case.
          translate help1 using
               'ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
          call 'C_DIR_READ_START'
                id 'DIR'    field dir_name
                id 'FILE'   field help1.
          if sy-subrc = 0.
            clear error_counter.
            do.
              clear file.
              clear dir_list.
              call 'C_DIR_READ_NEXT'
                  id 'TYPE'   field file-line-type
                  id 'NAME'   field file-line-name
                  id 'LEN'    field file-line-len
                  id 'OWNER' field file-line-owner
                  id 'MTIME' field file-line-mtime
                  id 'MODE'   field file-line-acc_mode
                  id 'ERRNO' field errno
                  id 'ERRMSG' field errmsg.
              if sy-subrc = 0 or sy-subrc = 3.
                help2 = file_name.
                translate help2 to upper case.
                help1 = file-line-name.
                translate help1 to upper case.
                if help1 = help2.
                  perform p6_to_date_time_tz(rstr0400) using
                     file-line-mtime
                     file-line-mod_time
                     file-line-mod_date.
                  dir_list = file-line.
                  append dir_list.
                endif.
              elseif sy-subrc = 1.
                exit.
              else.
                if error_counter > 50.
                  call 'C_DIR_READ_FINISH'
                      id 'ERRNO' field errno
                      id 'ERRMSG' field errmsg.
                  pos = f_subrc mod 2.
                  if pos = 0. f_subrc = f_subrc + 1. endif.
                  exit.
                endif.
                add 1 to error_counter.
              endif.
              if sy-index > 1000.
                pos = f_subrc mod 4.
                if pos = 0. f_subrc = f_subrc + 2. endif.
                exit.
              endif.
            enddo.
            call 'C_DIR_READ_FINISH'
                 id 'ERRNO' field errno
                 id 'ERRMSG' field errmsg.
          endif.
        endif.
      endif.
endcase.
ENDCASE.
CASE f_subrc.
   WHEN 1 OR 3.             RAISE too_many_errors.
   WHEN 2.                  RAISE too_many_files.
   WHEN 4 OR 5 OR 6 OR 7 OR 70 OR 71.
     RAISE bracket_error_in_filename.
   WHEN 8 OR 9 OR 10 OR 11 OR 74 OR 75.
     RAISE no_such_parameter.
   WHEN 64.                 RAISE no_authority.
   WHEN 65.                 RAISE activity_unknown.
   WHEN 66.                 RAISE not_a_directory.
   WHEN 67.                 RAISE no_media_in_drive.
ENDCASE.
endfunction.
Now you will be able to get the filesize and the file in SDOK format sdokbin.
Okay.
You have to build an request and push the content to the user like:
call method server->response->set_header_field( name = 'Content-Type' value = value ).
describe field file_content_binary-line length line_length in byte mode.
bytes_rest = file-size.
loop at file_content_binaries assigning <file_content_binary>.
    move <file_content_binary>-line to data.
    if bytes_rest <= 0. "mismatch between line values and size
      exit.
    endif.
    if bytes_rest >= line_length.
      call method server->response->append_data( data = data
        length = line_length ).
    else.
      call method server->response->append_data( data = data
        length = bytes_rest ).
    endif.
    bytes_rest = bytes_rest - line_length.
endloop.
This will work.
You can set the header fields like you want. Have also a look at sicf node contentserver
and its handler: CL_HTTP_EXT_CSIF

Download pdf into MDM server.

Similar Messages

Maybe you are looking for