Download the korean text file using ANSI as encoding

Hi Experts,
i am using gui_download to create a txt file using ANSI as its encoding, the data that i need to download contains korean characters (double-byte characters), when the txt file is created, the korean characters were changed into ### symbols.
Can someone help me on how to correctly download the data with korean characters without making the korean characters into sharp # symbol.
Please note that the encoding should be in ANSI.

I don't think if your are using ANSI , you will get korean characters correctly.
otherwise
first call fm SCP_CODEPAGE_FOR_LANGUAGE giving language as import parameter . then you will get the corresponding codepage from this fm.
then
use this codepage in the import parameter CODEPAGE of fm GUI_DOWNLOAD
a®

Similar Messages

  • Downloading two different text files using gui_download

    Hi Folks,
    I have two internal tables.itab1 and itab2.Generally in  most cases I have to download only the data in itab1 as a text file using Gui_download.In some cases if a particular condition is satisfied I need to download both itab1 and itab2 data as two different text files using gui_download.To achieve this I had called the gui_download twice as I have to pass two different internal tables.
    But I am getting only itab1 textfile and not itab2 textfile.
    In the selection screen I am giving the path as c:\..
    Kindly let me know where I am going wrong.
    K.Kiran.

    Hi
    You keep the both files in a ITAB and in the loop of that Itab use GUI_DOWNLOAD to download the two files
    data: begin of itab,
              file like rlgrap-filename,
            end of itab.
    In initialization event
    put the two files into this ITAB.
    loop at itab
    call function gui_download.
    endloop.
    check like this
    Regards
    Anji

  • Problem while downloading data to text file using GUI_DOWNLOAD FM

    Hi,
    When we download the data using the GUI_DOWNLOAD FM into the text file tab delimeted(table is built dynamically),
    Its coming in this format as shown below
    Field1  Fileld2  Field3
    1     2      3
    However I want it in this way
    Field1  Fileld2  Field3
    1          2         3
    Could someone please let me know how to achieve this?

    Do something like this:
    concatenate field1 field2 field3 into lv_outx "(data of sufficient length, type c)
    separated by gc_tab.  "Horizontal tab constant created as note above
    condense lv_outx no-gaps.  "squeeze out extraneous spaces but beware if you have text with spaces...drop the no-gaps.
    append lv_outx to my_internal_table.  "table with a single field type char, sufficient length
    open dataset  datasetname...
    loop at my_internal_table into ls_internaltabstructure.
      transfer internaltabstructure-outx to datasetName [length if needed].
    endloop.

  • How to read the whole text file lines using FTP adapter

    Hi all,
    How to read the whole text file lines when error occured middle of the text file reading.
    after it is not reading the remaining lines . how to read the whole text file using FTP adapter
    pls can you help me

    Yes there is you need to use the uniqueMessageSeparator property. Have a look at the following link for its implementation.
    http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CIACDAAC
    cheers
    James

  • How to download a text file using classes

    Hi Guys
    I want to download a text file using classes.
    Any idea how to do it ?
    Thanks
    Sameer

    HI sameer,
       It is no different from using a Function module.
    example:
      CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
          filename                  = w_fpath
        append                    = SPACE
          write_field_separator     = 'X'
        CHANGING
          data_tab                  = it_download
        EXCEPTIONS
          file_write_error          = 1
          no_batch                  = 2
          gui_refuse_filetransfer   = 3
          invalid_type              = 4
          no_authority              = 5
          unknown_error             = 6
          header_not_allowed        = 7
          separator_not_allowed     = 8
          filesize_not_allowed      = 9
          header_too_long           = 10
          dp_error_create           = 11
          dp_error_send             = 12
          dp_error_write            = 13
          unknown_dp_error          = 14
          access_denied             = 15
          dp_out_of_memory          = 16
          disk_full                 = 17
          dp_timeout                = 18
          file_not_found            = 19
          dataprovider_exception    = 20
          control_flush_error       = 21
          not_supported_by_gui      = 22
          error_no_gui              = 23
          OTHERS                    = 24
    Regards,
    ravi

  • I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

    I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
    When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

    StevenD: FYI, I did NOT give you the one star rating. I would never do that!
    StevenD wrote:
    Ow. Someone is grumpy today.
    Well, this is an assignment, so it is probably homework.
    Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
    This would make no sense unless all of it was just covered in class!
    This is not a free homework service with instant gratification.
    OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
    "...but have no idea where to begin".
    open notepad.
    decide on a format, possibly one line per indicator.
    type the document.
    close notepad.
    open LabVIEW.
    Open the existing VI with all the indicators.
    (are you still following?)
    look at the diagram.
    Who made the program?
    Does the code make sense so far?
    Is it a statemachine or just a bunch of crisscrossed wires?
    Where do you want to add the file read?
    How should the file be read (after pressing a read button, at the start of the program ,etc.)
    See how far you get!
    Message Edited by altenbach on 06-24-2008 11:23 AM
    LabVIEW Champion . Do more with less code and in less time .

  • What program is used by Trx F110 to make the report text file?

    Hello everybody!
    Do you know what is the program used by trx F110 (Automatic Payment transactions) to create the flat text file in the Operating System? I know that, in case of a payment method 'C' (check), SAP can print the check using the programs that appear at Printout/data medium tab (listed in the Form printing/DME box). But the issue is that the check is printing the street address of the vendor, not the one of the ALTERNATIVE PAYEE, in this case the payee is one of the vendor customers, but the check does not print the customer address.
    I would be glad if I could find the txt file creator program, due the information is sent to the printing program is at this file, so I become able to investigate the behavior of the program. Further beyond: do you know why F110 is not able to print the address of a customer of the vendor when making checks with alternative payee being one of their customers? Thank you and regards!

    What gives you an impression that a seperate program is called to write file at OS level.....it could be the program running behind the F110.....try checking the same...and look for GUI_DOWNLOAD in the program.

  • How to display the out put of the sql query in a text file using forms

    I want to display the out put of the sql query in a text file using forms 6.0.Same could be done using spool command in sqlplus but i want it using forms....Fiaz

    Have a look at the text_io package:
    http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=3&vtTopicFile=f1_help/oraini/c_text_io.html&vtTopicId=
    cheers

  • Report the size of all SharePoint Databases in a text file using PowerShell?

    I am new to Powershell. please help me for following question with step by step process.
    How to report the size of all SharePoint Databases in a text file using PowerShell?

    Hi Paul,
    Here is the changed script, which will also include the size for the Config DB.
    Please let me know if it worked:
    #Get SharePoint Content database sizes
    Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
    $date = Get-Date -Format "dd-MM-yyyy"
    #Variables that you can change to fit your environment
    $TXTFile = "D:\Reports\SPContentDatabase_$date.txt"
    $SMTPServer = "yourmailserver"
    $emailFrom = "[email protected]"
    $emailTo = "[email protected]"
    $subject = "Content & Config Database size reports"
    $emailBody = "Daily/Weekly/Monthly report on Content & Config databases"
    $webapps = Get-SPWebApplication
    $configDB = Get-SPDatabase | ?{$_.Name -eq ((Get-SPFarm).Name)}
    $ConfigDBSize = [Math]::Round(($configDB.disksizerequired/1GB),2)
    Add-Content -Path $TXTFile -Value "Config Database size: $($ConfigDBSize)GB"
    Add-Content -Path $TXTFile -Value ""
    foreach($webapp in $webapps)
    $ContentDatabases = $webapp.ContentDatabases
    Add-Content -Path $TXTFile -Value "Content databases for $($webapp.url)"
    foreach($ContentDatabase in $ContentDatabases)
    $ContentDatabaseSize = [Math]::Round(($ContentDatabase.disksizerequired/1GB),2)
    Add-Content -Path $TXTFile -Value "- $($ContentDatabase.Name): $($ContentDatabaseSize)GB"
    if(!($SMTPServer) -OR !($emailFrom) -OR !($emailTo))
    Write-Host "No e-mail being sent, if you do want to send an e-mail, please enter the values for the following variables: $SMTPServer, $emailFrom and $emailTo."
    else
    Send-MailMessage -SmtpServer $SMTPServer -From $emailFrom -To $emailTo -Subject $subject -Body $emailBody -Attachment $TXTFile
    Nico Martens - MCTS, MCITP
    SharePoint 2010 Infrastructure Consultant / Trainer

  • How to read two text files using the Read from spreadsheet.vi and then plot it

    I need to read two text files using the read from spreadsheet function and then plot these files over time.
    The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
    I really appreciate any help..thanks
    Attachments:
    RMS.txt ‏1 KB
    FREQUENCY.txt ‏1 KB

    From NI Example Finder:
    Write to Text File.vi
    Read from Text File.vi
    Jean-Marc
    LV2009 and LV2013
    Free PDF Report with iTextSharp

  • How to write data to text file using external tables

    can anybody tell how to write data to text file using external tables concept?

    Hi,
    Using external table u can load the data in your local table in database,
    then using your local db table and UTL_FILE pacakge u can wrrite data to text file
    external table
    ~~~~~~~~~~~
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2153251
    UTL_FILE
    ~~~~~~~~~
    http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14093
    Message was edited by:
    Nicloei W
    Message was edited by:
    Nicloei W

  • Downloading  pipe delimited text file on to desktop  with data in internal

    hi all,
    how  to download pipe delimited text file on to desktop  with data in internal
    table with an example plz.

    hi,
    u can use the FM GUI_DOWNLOAD.
    here is the sample code.
    *Internal table to hold the employee details
    DATA: it_details TYPE STANDARD TABLE OF x_details,
          wa_details TYPE x_details.
    *Internal table for file
    DATA: BEGIN OF  it_details_txt OCCURS 0,
            line(700),
          END OF  it_details_txt.
    *Employee details for the file
      CLEAR wa_details.
      LOOP AT it_details INTO wa_details.
        CLEAR it_details_txt.
        CONCATENATE
            wa_details-var1
            wa_details-var2
            wa_details-var3
            wa_details-var4
          INTO it_details_txt-line SEPARATED BY '|'.
        APPEND it_details_txt.
        CLEAR wa_details.
      ENDLOOP.
    *Download file in .TXT format to local desktop
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                = 'data.txt'
          filetype                = 'ASC'
        TABLES
          data_tab                = it_details_txt
        EXCEPTIONS
          file_open_error         = 1
          file_write_error        = 2
          invalid_filesize        = 3
          invalid_type            = 4
          no_batch                = 5
          unknown_error           = 6
          invalid_table_width     = 7
          gui_refuse_filetransfer = 8
          customer_error          = 9
          no_authority            = 10
          OTHERS                  = 11.
      IF sy-subrc = 0.
        MESSAGE 'Data downloaded successfully' TYPE 'S'.
      ENDIF.

  • Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1

    hello guys, i'm a newbie here.
    I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
    first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
    By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
    REPORT ZHR_TESTEMAIL .
    TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
    DATA: FOLD_YR(2) TYPE C,
          FOLD_TYPE(3) TYPE C,
          G_HEADER LIKE SOOD2,
          G_FOLMAM LIKE SOFM2,
          METHOD1 LIKE SY-UCOMM,
          G_DOCUMENT LIKE SOOD4,
          G_USER LIKE SOUDNAMEI1,
          FOLD_NUMBER(12) TYPE C,
          G_NEW_PARENT LIKE SOODK,
          G_OWNER LIKE SOUD-USRNAM,
          G_REF_DOCUMENT LIKE SOOD4,
          G_USER_DATA LIKE SOUDATAI1,
          G_AUTHORITY LIKE SOFA-USRACC,
          G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
          G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
          G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
          G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
          G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
          G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
          G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF G_FILES OCCURS 10 ,
          TEXT(4096) TYPE C,
          END OF G_FILES.
    DATA: BEGIN OF IT_WS_FILE OCCURS 0,
          WS_FILE LIKE RLGRAP-FILENAME,
          END OF IT_WS_FILE.
    DATA: BEGIN OF IT_SAPID OCCURS 0,
          SAPID LIKE USR02-BNAME,
          END OF IT_SAPID.
    DATA: BEGIN OF IT_EMAIL OCCURS 0,
          EMAILADD LIKE PA0105-USRID_LONG,
          END OF IT_EMAIL.
    DATA: BEGIN OF IT_TSP01 OCCURS 0.
            INCLUDE STRUCTURE TSP01.
    DATA: END OF IT_TSP01.
    DATA: BEGIN OF TAB2 OCCURS 50,
          TEXT(200) TYPE C,
          END OF TAB2.
    DATA: V_DOCDATA TYPE SODOCCHGI1,
          V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
          V_OBJHEAD LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJTXT  LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJBIN  LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          V_OBJHEX  LIKE SOLIX      OCCURS 0 WITH HEADER LINE,
          IT_RECVRS TYPE SOMLRECI1  OCCURS 0 WITH HEADER LINE,
          IT_CONTNT TYPE SOLISTI1   OCCURS 0 WITH HEADER LINE,
          IT_BODY   LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
          V_TLIN    TYPE I,
          V_LINE    TYPE I.
    DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
          TEXTLINE(5000),
          END OF IT_TEXTLINE.
    DATA: FYL LIKE RLGRAP-FILENAME,
          GV_SUBNO LIKE SOSU-SUBNO,
          GV_EMAIL LIKE PA0105-USRID_LONG,
          GV_NEXTDAY LIKE SY-DATUM,
          YEAR(4) TYPE C,
          RECFLAG TYPE C.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
    PARAMETERS: SUBJ(254) TYPE C OBLIGATORY,            "Subject
                DESC(254) TYPE C.                       "Message
    SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
    SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK PARAM.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
    SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK PARAM2.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT2 RADIOBUTTON GROUP A.                  "Server
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS: RBUT3 RADIOBUTTON GROUP A.                  "Spool
    SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
    PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER.            "Spool Number
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PARAM3.
    SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
    SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PROC.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
      DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
      CLEAR: WS_FILE_TEMP.
      CALL FUNCTION 'F4_FILENAME'
           EXPORTING
                PROGRAM_NAME  = SY-REPID
                DYNPRO_NUMBER = SY-DYNNR
                FIELD_NAME    = 'WS_FILE'
           IMPORTING
                FILE_NAME     = WS_FILE_TEMP.
      WS_FILE-LOW = WS_FILE_TEMP.
    AT SELECTION-SCREEN.
      SELECT SAPNAM FROM SOUC
          INTO TABLE IT_SAPID
          WHERE SAPNAM IN SAPID
            AND DELETED = ''.
      GV_NEXTDAY = SY-DATUM + 1.
      LOOP AT EMAILADD.
        IT_EMAIL-EMAILADD = EMAILADD-LOW.
        APPEND IT_EMAIL.
        CLEAR: IT_EMAIL.
      ENDLOOP.
      IF NOT BPROC IS INITIAL.
        CLEAR: RBUT1, RBUT3.
        RBUT2 = 'X'.
      ELSE.
        CLEAR: RBUT2.
      ENDIF.
      IF NOT RBUT3 IS INITIAL.
        REFRESH: WS_FILE.
      ENDIF.
      IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
        MESSAGE E000(ZZ) WITH TEXT-201.
      ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
        CLEAR IT_SAPID.
        READ TABLE IT_SAPID.
        SELECT SINGLE SUBNO FROM SOSU
          INTO GV_SUBNO
          WHERE USRNO IN ( SELECT USRNO FROM SOUC
                             WHERE SAPNAM = IT_SAPID-SAPID ).
        IF SY-SUBRC NE 0.
          MESSAGE E000(ZZ) WITH TEXT-202.
        ENDIF.
        CLEAR: IT_SAPID.
      ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
        CLEAR: IT_SAPID, IT_EMAIL.
        READ TABLE IT_SAPID.
        READ TABLE IT_EMAIL.
        SELECT SINGLE SUBNO FROM SOSU
          INTO GV_SUBNO
          WHERE USRNO IN ( SELECT USRNO FROM SOUC
                             WHERE SAPNAM = IT_SAPID-SAPID ).
        IF SY-SUBRC NE 0.
          SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
                          WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
                          WITH SUB_ESC EQ 'U'
                          WITH EDAT EQ SY-DATUM
                          WITH BDAT EQ SY-DATUM
                         WITH BDAT EQ GV_NEXTDAY
                         WITH EDAT EQ '99991231'
                          WITH BTIM EQ SY-UZEIT
                          WITH ETIM EQ '240000'
                          WITH FORW_ALL EQ 'X'
                          WITH PSTHR2 EQ ''
                          AND RETURN.
        ENDIF.
        CLEAR: IT_SAPID.
      ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
        RECFLAG = 'X'.
      ENDIF.
    START-OF-SELECTION.
        PERFORM B_SENDMAIL.
    FORM B_SENDMAIL.
      YEAR = SY-DATUM+0(4).
      LOOP AT WS_FILE.
        CLEAR: FYL.
        FYL = WS_FILE-LOW.
        REFRESH: TAB2.
        CALL FUNCTION 'WS_UPLOAD'
             EXPORTING
                  FILENAME = FYL
                  FILETYPE = 'BIN'
             TABLES
                  DATA_TAB = TAB2.
        IT_TEXTLINE[] = TAB2[].
    DOCUMENT_DATA (SUBJECT OF MAIL)
        V_DOCDATA-OBJ_NAME   = DESC.
        V_DOCDATA-OBJ_DESCR  = SUBJ.
        V_DOCDATA-OBJ_LANGU  = SY-LANGU.
        V_DOCDATA-SENSITIVTY = 'C'.
        V_DOCDATA-OBJ_PRIO   = '1'.
    BODY OF MAIL
        IT_BODY-LINE = 'Collection Report'.
        APPEND IT_BODY.
    CONTENTS_TXT (Attachments)
        IT_CONTNT[] = IT_TEXTLINE[].
        DESCRIBE TABLE IT_CONTNT LINES V_LINE.
        READ TABLE IT_CONTNT INDEX V_LINE.
    PACKING_LIST
        V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
        V_OBJPACK-TRANSF_BIN = 'X'.
        V_OBJPACK-HEAD_START = 1.
        V_OBJPACK-HEAD_NUM   = 0.
        V_OBJPACK-BODY_START = 1.
        V_OBJPACK-BODY_NUM   = V_LINE.
        V_OBJPACK-DOC_TYPE   = 'TXT'.
        V_OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
        V_OBJPACK-OBJ_DESCR  = 'Attached Document'.
        APPEND V_OBJPACK.
        CLEAR  V_OBJPACK.
    RECEIVERS of mail
        IF RECFLAG IS INITIAL.
          LOOP AT IT_SAPID.
            IT_RECVRS-RECEIVER   = IT_SAPID-SAPID.
            IT_RECVRS-REC_TYPE   = 'B'.
            IT_RECVRS-COM_TYPE   = ''.
            IT_RECVRS-EXPRESS    = 'X'.
            IT_RECVRS-NO_FORWARD = ''.
            IT_RECVRS-NO_PRINT   = ''.
            APPEND IT_RECVRS.
            CLEAR IT_RECVRS.
          ENDLOOP.
        ELSE.
          LOOP AT EMAILADD.
            IT_RECVRS-RECEIVER   = EMAILADD-LOW.
            IT_RECVRS-REC_TYPE   = 'U'.
            IT_RECVRS-COM_TYPE   = 'INT'.
            IT_RECVRS-EXPRESS    = 'X'.
            APPEND IT_RECVRS.
            CLEAR IT_RECVRS.
          ENDLOOP.
        ENDIF.
    OBJECT_HEADER (Filename)
        CONCATENATE 'Collection Report' '_'
                     SY-DATUM+4(4) YEAR '.TXT'
                     INTO V_OBJHEAD-LINE.
       V_OBJHEAD-LINE = FYL+16(25).
        APPEND V_OBJHEAD.
        CLEAR V_OBJHEAD.
    Function Module For Sending Mail with Attachment
        CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
             EXPORTING
                  DOCUMENT_DATA              = V_DOCDATA
             TABLES
                  PACKING_LIST               = V_OBJPACK
                  OBJECT_HEADER              = V_OBJHEAD
                  CONTENTS_HEX               = IT_CONTNT
                  CONTENTS_TXT               = IT_BODY
                  RECEIVERS                  = IT_RECVRS
             EXCEPTIONS
                  TOO_MANY_RECEIVERS         = 1
                  DOCUMENT_NOT_SENT          = 2
                  DOCUMENT_TYPE_NOT_EXIST    = 3
                  OPERATION_NO_AUTHORIZATION = 4
                  PARAMETER_ERROR            = 5
                  X_ERROR                    = 6
                  ENQUEUE_ERROR              = 7
                  OTHERS                     = 8.
        IF SY-SUBRC = 0.
          MESSAGE S000(ZZ) WITH TEXT-005.
        ELSE.
          MESSAGE S000(ZZ) WITH TEXT-006.
        ENDIF.
      ENDLOOP.
    end of my code *
    please help me guys... when i run this program,    DOCUMENT_NOT_SENT is what i always get.. 
    waiting for ur reply... thank you vey much and godbless.

    Hi,
    Try this sample code.
    FORM SEND_TO_EMAIL USING zFName.
      DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
      DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
      DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
      DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
      DATA: DOC_CHNG LIKE SODOCCHGI1.
      DATA: TAB_LINES LIKE SY-TABIX.
      DATA: ctmp(50) TYPE C.
    Creation of the document to be sent
      DOC_CHNG-OBJ_NAME = 'JOURNAL'.
      CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
                  SEPARATED BY SPACE.
      DOC_CHNG-OBJ_DESCR = cTmp.
      OBJTXT = 'SAP Payroll Journal'.
      APPEND OBJTXT.
      CONCATENATE 'For Period' pybegda INTO ctmp
                  SEPARATED BY SPACE.
      OBJTXT = ctmp.
      APPEND OBJTXT.
      CONCATENATE 'Attached File :' zFname INTO ctmp
                  SEPARATED BY SPACE.
      OBJTXT = ctmp.
      APPEND OBJTXT.
      OBJTXT = 'Please find the attachment.'.
      APPEND OBJTXT.
      DESCRIBE TABLE OBJTXT LINES TAB_LINES.
      READ TABLE OBJTXT INDEX TAB_LINES.
      DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
    Creation of the entry for the compressed document
      CLEAR OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = 'RAW'.
      APPEND OBJPACK.
    Creation of the document attachment
      <b>LOOP AT xMail.
        CONDENSE xMail-aline.
        OBJBIN = xMail-aline.
        APPEND OBJBIN.
        CLEAR OBJBIN.
      ENDLOOP.</b>
      DESCRIBE TABLE OBJBIN LINES TAB_LINES.
      OBJHEAD = zFname. APPEND OBJHEAD.
    Creation of the entry for the compressed attachment
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 1.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = 'RAW'.
      OBJPACK-OBJ_NAME = 'DATA'.
      OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
      OBJPACK-DOC_SIZE = TAB_LINES * 255.
      APPEND OBJPACK.
    Completing the recipient list
      LOOP AT PENERIMA.
        CONDENSE PENERIMA-PNRM.
        RECLIST-RECEIVER = PENERIMA-PNRM.
        RECLIST-REC_TYPE = 'U'.
        APPEND RECLIST.
      ENDLOOP.
    Sending the document
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = DOC_CHNG
                PUT_IN_OUTBOX              = ' '
           TABLES
                PACKING_LIST               = OBJPACK
                OBJECT_HEADER              = OBJHEAD
                CONTENTS_BIN               = OBJBIN
                CONTENTS_TXT               = OBJTXT
                RECEIVERS                  = RECLIST
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                OPERATION_NO_AUTHORIZATION = 4
                OTHERS                     = 99.
      CASE SY-SUBRC.
        WHEN 0.
          WRITE: / 'Result of the send process:'.
          LOOP AT RECLIST.
            WRITE: / RECLIST-RECEIVER(48), ':'.
            IF RECLIST-RETRN_CODE = 0.
              WRITE / 'The document was sent'.
            ELSE.
              WRITE / 'The document could not be sent'.
            ENDIF.
          ENDLOOP.
        WHEN 1.
          WRITE: / 'Too many receiver'.
        WHEN 2.
          WRITE: / 'Document could not be sent to any recipient'.
        WHEN 4.
          WRITE: / 'No send authorization'.
        WHEN OTHERS.
          WRITE: / 'Error occurred while sending'.
      ENDCASE.
    ENDFORM.

  • How to print a text file using Java

    How can I print a text file using Java without converting the output to an image format. Is there anyway I can send the characters in the text file as it is for a print job? I did get a listing doing this ... but that converted the text to an image format before printing....
    THanks,.

    Hi I had to write a print api from scratch, and I did not convert the output to image. Go and read up on the following code. I know there is a Tutorial on Sun about the differant sections of the snippet.
    private void printReport()
         Frame tempFrame = new Frame(getName());
         PrintJob printerJob = Toolkit.getDefaultToolkit().getPrintJob(tempFrame, "Liesltext", null);
         Graphics g = printerJob.getGraphics();
                    //I wrote the method below for calculations
         printBasics(g);
         g.dispose();
         printerJob.end();
    }This alone wont print it you have to do all the calculations in the printBasics method. And as I said I wrote this from scratch and all I did was research first the tutorial and the white papers
    Ciao

  • How to read a tab seperated data from a text file using utl_file

    Hi,
    How to read a tab seperated data from a text file using utl_file...
    I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
    Thanks in advance...
    Naveen

    Naveen Nishad wrote:
    How to read a tab seperated data from a text file using utl_file...
    I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
    If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

Maybe you are looking for