Downloaded IOS5 to my Ipad and now cannot synch with itunes - I get no messages

I have downloaded IOS5 and the IPad works fine but I cannot synch with itunes and all of my Ipad music, videos and photos are gone.  Tough to tell wher I went wrong since I can run wireless synch and it gets to stage 7 but then nothing happens.  I hope someone else has encountered and solved this already.

ios 6 requires itunes 10.6.3 or higher which requires Mac OS 10.6.8 or higher

Similar Messages

  • I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it.  it then tells me to unplug the ipad and plug it in again.l  I do that and get the same message.

    I just restored my ipad and now when I connect it, I get a message that says itunes dected an ipad but doesn't recongnise it.  it then tells me to unplug the ipad and plug it in again.l  I do that and get the same message.

    have you tried a different usb port? for the **** of it try restarting the computer as well

  • Downloaded the latest version (8.0) and now cannot connect. Instead I get this message: Unable to connect

    Every time you guys have an update there is a problem. Now I cn't connect! I am writing you using IE. Maybe I should just stop using Firefox! When trying to connect I get the following error message:Unable to connect
    Firefox can't establish a connection to the server at www.google.com.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.

    I just wanted to post that I found my I-pod cache file and deleted it and now synchronization works fine, so no need for anyone to post an answer to this.   Thank you very much.

  • I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted.

  • I am trying to download iOS5 on my iPad and this is the message : an error occurred while backing up this iPad (-37). Would you like to continue to update this iPad? Continuing will result in the loss of all content on this iPad

    I am trying to download iOS5 on my iPad and this is the message : "an error occurred while backing up this iPad (-37). Would you like to continue to update this iPad? Continuing will result in the loss of all content on this iPad"  Pls advise what is my next step

    continue to updatae your phone.

  • HT201272 I downloaded movies to my iPad and now want to see them on my iPod but I don't know if apple will still charge me

    I download movies to my iPad and now want to   See them on my iPod but don't know if apple will chargeme  I used the same account

    Welcome to the Apple Community.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.

  • My child reset the password on the iPad and now cannot remember it. How do I reset it?

    My child reset the passcode on the iPad and now cannot remember it. How do I reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents

    If it's because you were using Office 2004, the eight year old version of Office that was written when Intel processors were not used in Macs, then there will be no fix. Lion dropped support for PowerPC applications, as has been widely reported since Lion's release last August.
    You can upgrade Office 2004 to Office 2008 or Office 2011. You can use iWorks 2009 that can open Microsoft files. You can use a number of free applications that are also capable of working with Microsoft documents. You can go back to Snow Leopard, if you have a backup. Or, if you have an external drive or room to add a partition to your current drive, you can install Snow Leopard on it.
    Search these forums for more information. If this is your issue, it's been posted and answered several times a day since August 2011.

  • After updating iOS, I only see a black screen on my iPad asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???

    After updating iOS 8.0, I only see a black screen on my iPad 4 asking for a 4 digits passcode, I've tried severeal times and now every time I try I get this message "Ipad dissable wait 60 min... I do not know what to do???

    Howdy mendjes25,
    It sounds like you’ve recently updated your iPad and now it’s disabled because the passcode you’re entering isn’t being accepted. I can imagine that would be frustrating. Take a look at the article linked below, it describes the alert you’re seeing and provides the possible resolutions for that issue.
    iOS: Forgot passcode or device disabled
    I hope this helps,
    -Jason

  • HT1751 I was installing iTunes 11.1.4 and it was unsuccessful. I get a message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

    I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • I have a powerbook G4 running OS X 10.5.8.   I had a new hard drive installed and now cannot access my itunes.  I do I get my itunes that I paid for??

    I have a powerbook G4 running OS X 10.5.8.   I had a new hard drive installed and now cannot access my itunes.  I do I get my itunes that I purchased?

    Hi,
    Read this. http://support.apple.com/kb/HT2519
    Jim

  • I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can't open the application "Install Adobe Photoshop 6.0" because it may be damaged or incomplete".

    I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
    Does anyone know how to fix this problem?

    you probably have an incomplete/corrupt download.
    to confirm check the file size against the expected file size.
    then re-download perhaps with a different browser.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • While updating my iphone software it got intruppted and now showing connect to itune not getting restored

    while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help

    Try doing a hard reset on the phone;
    1. Hold Home and Sleep/Wake buttons at the same time;
    2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
    3. Let go of the buttons when you see Apple on the screen
    4. Allow iPhone to reboot;
    If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement)

  • HT203175 My Windows XP recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes."  I have never had problems in the past.  Is this a real m

    My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly.  Please reinstall iTunes." 
    I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade.  I have never had problems with iTunes in the past.  Is this a real message or perhaps a virus?
    Before I reinstall iTunes, any thoughts?

    It's a real message.
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Maybe you are looking for

  • Where to store the password data for  exiting user in Elgamal Algorithm

    hi, i am doing a project in Intelligent security in java using Elagamal algorithm. The feature of Elgamal is that the password is not stored in database . Then where is the password is stored to check for a existing user . If i am an existing user th

  • Hidden Buttons and Forms Printing CS6

    I'm not exactly sure how to word this but I have buttons and forms that are printing when they are not supposed to. This is my indd file: If you can see, there are 3 sections, each identical except for the fact that they have different states. If som

  • IPS Tech Tip - Evasions - TCP/IP examples and handling - Sig team presentation

    Hi Customers, Its summer time and nothing evokes cool quite like a discussion into the TCP / IP stack and how creative attacker types try to hide attacks behind it. This presentation will feature a security researcher from our signature team and wil

  • Selecting Images Using Keywords

    I seem to be confused about how keywords are used to select the images in a library view. Can I even use the "keywords tags" pallete of the Library to select the images that are displayed, or is it just going to show me what keywords apply to the ima

  • Pre-compiled Solaris 10 X*^ mod_jk package

    Anyone knows where can I get mod_jk Solaris 10 X86 package (not the source code!)? Thanks, Oren