Downloading the internal table contents into presentation server

Hi
I have a requirement like i need to download the contetns of my internal table into an excel sheet in the presemtation server and i am using GUI_DOWNLOAD.
I would like to place my header also in the excel sheet can any one suggest me how to do that?
thanks

Hi,
U can see the following example,
TYPES:
BEGIN OF TYPE_S_FLIGHT,
   MANDT(15) TYPE C,
   CARRID(15) TYPE C,
   CONNID(15) TYPE C,
   FLDATE(15) TYPE C,
END OF TYPE_S_FLIGHT.
data:
T_HEADER TYPE TABLE OF TYPE_S_FLIGHT WITH HEADER LINE,
t_sflight type table of SFLIGHT.
T_HEADER-MANDT = 'MANDT'.
T_HEADER-CARRID = 'CARRID'.
T_HEADER-CONNID = 'CONNID'.
T_HEADER-FLDATE = 'FLDATE'.
APPEND T_HEADER.
PERFORM GUI_DOWNLOAD TABLES T_HEADER USING ' '.
select MANDT
        CARRID
        CONNID
        FLDATE
from sflight into CORRESPONDING FIELDS OF table t_sflight.
PERFORM GUI_DOWNLOAD TABLES T_SFLIGHT USING 'X'.
form GUI_DOWNLOAD TABLES P_TABLE USING VALUE(P_APPEND).
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                      = 'C:\TEMP1\FLIGHT.XLS'
   APPEND                        = P_APPEND
   WRITE_FIELD_SEPARATOR         = 'X'
tables
    data_tab                      = P_TABLE
In this case u have to populate the one table for header. The other one is for data.
Thanks,
Nithya.
Edited by: Nithya Murugesan on Feb 8, 2009 1:00 PM

Similar Messages

FM to upload the Internal table data into application server.

Hi,
Could you please give me Function module to Upload the Internal table data into Application server ie., in Tcode AL11.
I know for downloading the Application server file into itab is "SUBST_GET_FILE_LIST" FM and using open dtaa set we get the data.
Regards,
deepthi.

Hi Deepthi
Incase you are looking to upload data in the AL11 through a program , then you can make use of OPEN DATASET...CLOSE DATASET statements.
Here's the code snippet:
IF tb_alvdisplay[] IS INITIAL.
    MESSAGE e999(/dcsea/zais_msg) WITH text-e01.
ELSE.
    IF NOT cb_ufile IS INITIAL "Download to file
     AND sy-pagno = 0.            "Only down page headers for first page
      PERFORM fm_concatenate_path_name USING    p_path
                                                p_file
                                       CHANGING v_file.
*Open file for download.
      PERFORM fm_open_file USING v_file .
    ENDIF.
    LOOP AT tb_alvdisplay.
      IF NOT cb_ufile IS INITIAL.
*Passing the values of the respective headings to the structure.
        ws_rec-vend_no     = tb_alvdisplay-vendno.
        ws_rec-vend_nm     = tb_alvdisplay-vendnm.
        ws_rec-title       = tb_alvdisplay-vendtl.
        ws_rec-add         = tb_alvdisplay-add.
        ws_rec-city1       = tb_alvdisplay-city1.
        ws_rec-region      = tb_alvdisplay-region.
        ws_rec-country     = tb_alvdisplay-country.
        ws_rec-pobox       = tb_alvdisplay-po.
        ws_rec-phone       = tb_alvdisplay-telf1.
        ws_rec-extn        = tb_alvdisplay-extn.
        ws_rec-fax         = tb_alvdisplay-telfx.
        ws_rec-zterm       = tb_alvdisplay-zterm.
        ws_rec-remark      = tb_alvdisplay-remark.
        ws_rec-email       = tb_alvdisplay-email.
*Passing the separator 'PIPE' to the structure.
          ws_rec-sep01 = co_sep.
          ws_rec-sep02 = co_sep.
          ws_rec-sep03 = co_sep.
          ws_rec-sep04 = co_sep.
          ws_rec-sep05 = co_sep.
          ws_rec-sep06 = co_sep.
          ws_rec-sep07 = co_sep.
          ws_rec-sep08 = co_sep.
          ws_rec-sep09 = co_sep.
          ws_rec-sep10 = co_sep.
          ws_rec-sep11 = co_sep.
          ws_rec-sep12 = co_sep.
          ws_rec-sep13 = co_sep.
        TRANSFER ws_rec TO v_file.
      ENDIF.
      AT LAST.
        IF NOT cb_ufile IS INITIAL.
*Closing the DATASET file.
          CLOSE DATASET v_file.
          IF sy-subrc <> 0.
*Failure Message.
            MESSAGE e999(/dcsea/zais_msg) WITH text-t04 text-t06.
          ELSE.
*Success message.
            MESSAGE s999(/dcsea/zais_msg) WITH text-t05.
          ENDIF.
        ENDIF.
      ENDAT.
    ENDLOOP.
ENDIF.
Also as Gautham suggested you can use tcode CG3Z or CG3Y incase you are looking to upload the data directly.
FInally, you can search SCN using the keywords, "Upload to AL11" and you'll get loads of results.
Hope this helps.
Harsh

I am using GUI_DOWNLOAD FM to download my internal table entries into .xls

Hi
I am using GUI_DOWNLOAD FM to download my internal table entries into .xls file. but it's not download total records in final table.
in debugging it showing total records.
exporting:
filename
filetype
field-suprater
header
tables
data_tab
fieldnames
plz help me.
thanks
Sankar

Hi
Use as below:
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = p_file " path offile where u need to download
CREATE_PIVOT = 0
DATA_SHEET_NAME = ' '
PIVOT_SHEET_NAME = ' '
PASSWORD = ' '
PASSWORD_OPTION = 0
TABLES
PIVOT_FIELD_TAB =
data_tab = int_data "internal table with data
fieldnames = int_head "internal table with header
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Sreeram

Downloading the internal table with header to FTP folder

Hi All,
I have one requirement in downloading the internal table details with the fixed header line to FTP folder. The header line having the fixed text of 425 characters length.
Note: We are not suppose to use WS_DOWNLOAD and GUI_DOWNLOAD function modules.
Thanks in advance for your reply.
Regards
Kamini.

Hi,
I can download the internal table details successfully to FTP folder using the FTP function modules like(FTP_CONNECT, FTP_COMMAND , FTP_R/3_TO_SERVER and FTP_DISCONNECT). Here my problem is I am unable to download the internation table with some header text.
You can see the format (example) of file to be download.
Here I can successfully download the below details without the header. But I am unable to download with header line. Could you please suggest me.
seq_no|record_action|trans_date|sku|description|
1|N|2008-01-03 07:52:31|TTASA5025CBO
2|N|2008-01-03 10:28:33|411014
3|N|2008-01-03 10:01:03|TTASA6030CBO
4|N|2008-01-03 10:01:15|TTASA6630CBO
5|N|2008-01-03 10:01:25|TTASA7035CBO
6|N|2008-01-08 16:57:39|TT6G
Regards
Kamini.

Problem with downloading the internal table onto the presentation server.

Hey folks,
I have a problem where in i am downloading one year of sales done by the company. I wrote a program to download the file onto the presentation server . The error occurs in the FM GUI_DOWNLOAD where if the file exceeds 105843504 bytes its giving me a dump saying that
When the program was running , it was established that more memory was needed than the operating system is able to safely to provide.
The current program has to be terminted because of the program already requested 105843504 bytes from the operating system with malloc when the operating system reported after further memory request that there was no more memory space available.
Could somebody provide an alternative soltuion for this.
Its really urgent as i can download the file with 70,000,000 bytes
Regards
Rock

Hi Rock,
Please download the files on to Application Server, else as suggested by Ashish download into 2 or 3 files and merge them manually.
Declare same internal tables may be 5 times.
When you fill the internal table check for a counter and when you hit a certain number stop appending to it and start appending to the next.
After you are done so download all the internal tables.
I guess this would be a good way. I am not sure if there are any ther alternative good methods.
Hope this helps.
Shreekant

Reg: Downloading the internal table into excel file.

Hi,
My requirement is i am collecting data in the internal table and i have to download the contents in an excel file and i have declared like this.
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt'.
I have given the default file path like this and i am using the function module .
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      FILENAME                      = OUTPUT_PATH
      FILETYPE                      = 'DAT'
IMPORTING
FILELENGTH                      =
    TABLES
      DATA_TAB                        = INT_INPUT
FIELDNAMES                      =
   EXCEPTIONS
     FILE_WRITE_ERROR                = 1
     NO_BATCH                        = 2
     GUI_REFUSE_FILETRANSFER         = 3
     INVALID_TYPE                    = 4
     NO_AUTHORITY                    = 5
     UNKNOWN_ERROR                   = 6
     HEADER_NOT_ALLOWED              = 7
     SEPARATOR_NOT_ALLOWED           = 8
     FILESIZE_NOT_ALLOWED            = 9
     HEADER_TOO_LONG                 = 10
     DP_ERROR_CREATE                 = 11
     DP_ERROR_SEND                   = 12
     DP_ERROR_WRITE                  = 13
     UNKNOWN_DP_ERROR                = 14
     ACCESS_DENIED                   = 15
     DP_OUT_OF_MEMORY                = 16
     DISK_FULL                       = 17
     DP_TIMEOUT                      = 18
     FILE_NOT_FOUND                  = 19
     DATAPROVIDER_EXCEPTION          = 20
     CONTROL_FLUSH_ERROR             = 21
     OTHERS                          = 22.
My requirement is i dont want to change my extension as .txt from .exl to my parameter addition and in the function module the file type should be 'dat' only and in the runtime i want to change the file name which i have given in the .
PARAMETERS : x_test    TYPE string
                      DEFAULT 'C:\temp\file.txt' this file.txt into datas.xls.
it would be grateful if some one share some valuable views to wards this query
Thanks and Regards,
Keny

Hi,
Use this code.
It will ask for the file name...there u can change.
data : l_filename type string,
         l_filetype type char10,
         l_path type string,
         l_fullpath type string.
l_filetype = 'DAT'.
*Get the file name
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
    EXPORTING
      FILE_FILTER          = '*.DAT'
      INITIAL_DIRECTORY    = 'C:\'
    CHANGING
      FILENAME             = l_filename
      PATH                 = l_path
      FULLPATH             = l_fullpath
    EXCEPTIONS
      CNTL_ERROR           = 1
      ERROR_NO_GUI         = 2
      NOT_SUPPORTED_BY_GUI = 3
      others               = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
check l_fullpath is not initial.
*Download file
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME                = l_fullpath
      FILETYPE                = l_filetype
    CHANGING
      DATA_TAB                = t_data_sum[]
    EXCEPTIONS
      FILE_WRITE_ERROR        = 1
      NO_BATCH                = 2
      GUI_REFUSE_FILETRANSFER = 3
      INVALID_TYPE            = 4
      NO_AUTHORITY            = 5
      UNKNOWN_ERROR           = 6
      HEADER_NOT_ALLOWED      = 7
      SEPARATOR_NOT_ALLOWED   = 8
      FILESIZE_NOT_ALLOWED    = 9
      HEADER_TOO_LONG         = 10
      DP_ERROR_CREATE         = 11
      DP_ERROR_SEND           = 12
      DP_ERROR_WRITE          = 13
      UNKNOWN_DP_ERROR        = 14
      ACCESS_DENIED           = 15
      DP_OUT_OF_MEMORY        = 16
      DISK_FULL               = 17
      DP_TIMEOUT              = 18
      FILE_NOT_FOUND          = 19
      DATAPROVIDER_EXCEPTION = 20
      CONTROL_FLUSH_ERROR     = 21
      NOT_SUPPORTED_BY_GUI    = 22
      ERROR_NO_GUI            = 23
      others                  = 24.
IF sy-subrc NE 0.
    MESSAGE e398(00) WITH sy-subrc ' Error downloading file' '' ''.
ENDIF.
Regards
Sandeep REddy

Problem in changing the internal table contents of a standard program

Dear All,
I am making changes to internal table LT_PPDIT of standard program SAPLHRPT in the user exit EXIT_SAPLACC4_001 while payroll posting to accounting with tcode PC00_M99_CIPE. But though the changed value of LT_PPDIT is visible within the exit still the value of LT_PPDIT when we come outside exit is the same as what was before entering exit.
Please suggest is there any way of modifying internal table of a standard program in the user exit.
Regards,
Kanupriya

Hi,
I think the internal table is getting refreshed or something like that after the user exit.
Try debugging after the user exit and put breakpoints at clear and modify statements.
Then you ll find out where its regaining the oringinal value after getting changes.
After locating that point try finding some enhancmenent point there and including your code so that your value of internal able gets modified.
Regards,
Subhashini

Transfer of Internal table contents to ftp server

Hi,
I have data in one internal table, which needs to transferred to file on ftp server,
please tell me how to create file on ftp server, how should i transfer contents of this internal table to file on ftp server.
please help me.

Hi,
Please refer following code, which create a log file in Ftp server,
Step 1 Connect to Ftp server.
SET EXTENDED CHECK OFF.
    g_slen = STRLEN( p_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = p_pwd
      sourcelen   = g_slen
      key         = g_key
    IMPORTING
      destination = p_pwd.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user        <----- Pass User ID
      password        = p_pwd <---- Pass Password
      host            = p_host        <---- Pass IP Address
      rfc_destination = p_dest <----- RFC destination SAPFTP
    IMPORTING
      handle          = g_hdl
    EXCEPTIONS
      not_connected   = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    sy-msgty = 'E'.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*   MESSAGE SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4 TYPE 'I'.
ENDIF.
Step 2 Reading file from FTP
CALL FUNCTION 'FTP_SERVER_TO_R3'
EXPORTING
    handle               = g_hdl
    fname                = p_fname   <---- File path
*   CHARACTER_MODE       =
IMPORTING
   BLOB_LENGTH          = l_xml_table_size
TABLES
   BLOB                 = l_xml_table
*   TEXT                 =
EXCEPTIONS
   TCPIP_ERROR          = 1
   COMMAND_ERROR        = 2
   DATA_ERROR           = 3
   OTHERS               = 4
Step 3 Write a file
g_docid = l_filename.
* **Transferring the data from internal table to FTP Server.
DESCRIBE TABLE gt_log LINES l_count.
g_slen = l_count * 275.
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
    handle               = g_hdl
    fname                = g_docid     <---File name
   BLOB_LENGTH          = g_slen   <---- Length
   CHARACTER_MODE       = 'X'
TABLES
*   BLOB                 =
   TEXT                 = gt_log
EXCEPTIONS
   TCPIP_ERROR          = 1
   COMMAND_ERROR        = 2
   DATA_ERROR           = 3
   OTHERS               = 4

Sending internal table data to application server as an XML file

Hi All,
I am trying to send the internal table data to application server which should be stored in XML format.
I am using the following code:
DATA:
          result TYPE xstring.
        CALL TRANSFORMATION id
        SOURCE tab = p_output-xsfdata
        RESULT XML result.
        OPEN DATASET l_xml_full_path FOR OUTPUT IN BINARY MODE.
        TRANSFER result TO l_xml_full_path.
        CLOSE DATASET l_xml_full_path.
And the content in the internal table is :
3C3F786D6C2076657273696F6E3D22312E30223F3E3C736620786D6C6E733D2275726E3A736
73796D206E616D653D22534653592D44415445223E30362F31302F323030393C2F73796D3E2
50617961626C653C6E65772D6C696E652F3E50617274206F6620746865204E616D653C6E657
.......and so on
With this a file is getting created on the application server, but the data is not correct. I am getting the data something like:
<?xml version="1.0" encoding="utf-8"?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><TAB><item>
PD94bWwgdmVyc2lvbj0iMS4wIj8+PHNmIHhtbG5zPSJ1cm46c2FwLWNv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==</item>
<item>c3ltIG5hbWU9IlNGU1ktREFURSI+MDYvMTAvMjAwOTwvc3ltPiA8c
RSIMTQ6MDg6MDM8L3N5bT48L3APC90ZXh0Pjwvd2luZG93Pjx3aW5kb3cgbmFtZT0iTkFNRSIg
cGFnZT0iRklSU1QiIHBhZ2UtaWQ9IjAwMSI+PHRleHQgbmFtZT0iRk9STVVMQVJUSVRFTCIgc3R5
bGU9Ii9TTUIxMS9CTF9TRiIgbGFuZz0iRU4iPjxwIG5hbWU9IlROIj48Y2hyIG5hbWU9Ik1MIj48
c3ltIG5hbWU9IlRJVExFIj5JbnZvaWNlPC9zeW0PC9jaHIPC9wPjwvdGV4dD48L3dpbmRvdz48
d2luZG93IG5hbWU9IkJJTExUT1BBUlRZIiBwYWdlPSJGSVJTVCIgcGFnZS1pZD0iMDAxIj48dGV4
dCBuYW1lPSJXSU5ET1dfVEVYVCIgc3R5bGU9Ii9TTUIxMS9CTF9TRiIgbGFuZz0iRU4iPjxwIG5h
bWU9IlRIIj5CaWxsLVRvLVBhcnR5PC9wPjwvdGV4dD48YWRkcmVzcyBuYW1lPSJCSUxMQUREUkVT
UyIgYWRkcm51bWJlcj0iMDAwMDAyMjQyNyI+PHRleHQgbmFtZT0iQklMTEFERFJFU1MiIHN0eWxl
PSIvU01CMTEvQkxfU0YiIGxhbmc9IkVOIj48cCBuYW1lPSJUMiI+VGVjaCBJbmM8bmV3LWxpbmUv
Could anyone tell me the reason why am I getting the data in this way?
Thanks in advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 10, 2009 5:44 PM

HI,
Use this FM SAP_CONVERT_TO_XML_FORMAT to convert the data to XML format and then upload the convert data from the internal table to Application server.

Downloading two internal tables in same text file

I have one internal table as like below.
Data:begin of itab1 occurs 0,
     rec(5),
     end of itab1.
Itab1 is getting updated from input text file(Continuous text).
Here Itab1 contains one record with Indicator '01 and n number of records with indicator '02'.
This needs to be seperated in to two internal tables.
data:Begin of Itab_Head occurs 0,
     Rec_ind(2) type C,
     Name(3) type C,
     end of itab_Head.
data:Begin of Itab_Item occurs 0,
     Rec_ind(2) type C,
     Id(3) type C,
     Status(10,
     end of itab_Item.
loop at itab1.
If itab1-Rec+0(2) = '01'.
   Itab_Head-Rec_Ind = itab1-rec+0(2).
   Itab_Head-Name = itab1-rec+2(3).
   Append Itab_Head.
elseif itab1-rec+0(2) = '02'.
   Itab_Item-Rec_Ind = itab1-rec+0(2).
   Itab_Item-Id = itab1-rec+2(3).
   Append Itab_Item.
endif.
endloop.
After moving to the internal tables I am doing some processing and updating the status of Itab_item.
After all these again I have to download the internal table as a text file.Now my question is.
I have values in 2 diff internal tables.How to download the two in same file.

See this sample code.
data: itab1 type string occurs 0 with header line,
      itab2 type string occurs 0 with header line.
itab1 = 'itab1_text'.
append itab1.
itab2 = 'itab2_text'.
append itab2.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    exporting
      FILENAME = 'C:\ftext.txt'
    APPEND = 'X'
    changing
     DATA_TAB = itab1[].
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    exporting
      FILENAME = 'C:\ftext.txt'
      APPEND = 'X'
    changing
     DATA_TAB = itab2[].
Svetlin

How to Convert internal table data into xml and xml data into internal tab

Hi Guys,
I have a requirement that i have to convert the internal table data into xml format and viceversa . for my requirement i came to know that i have to use Transformations concept. i done the converting the data from internal table into xml data by using standard Tranformations. My Question is
1) Can i use same Transformation to convert the xml data into abap internal table. if it is possible then how ???
2) Is it possible using the standard Transformation or I have to go for XSLT approach
Please help me out from this guys,
Thanks and Regards
Koti

Hi Koti,
This is possible. There is a link. With the help of this link you can convert ABAP data to XML and vice versa.
Link: http://www.heidoc.net/joomla/index.php?option=com_content&view=article&id=15:sapxslt&catid=22:sap-xslt&Itemid=31

Downloading an internal table to presentation server from WebUI

Hi All,
We have a requirement to download an internal table as a CSV file from CRM 7.0 WebUI to the presentation server. The file path is fixed, so the user need not choose the download location. The data to be downloaded is not part of any view on the WebUI and is being collected through code from several context nodes.
We have looked at CL_BSP_UTILITY, which is not solving our purpose, as the prepared data stream gets over written by CRM 7.0 framework during execution.
Any suggestions on how we can achieve the functionality?
Regards,
Mugdha

Hi,
If you need to provide download window via the browser, check out this wiki - [http://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=187336093&version=6] . If you want to directly write to the presentation server, you have th efollowing ways. If you submit a report in background, you have the option of using CL_GUI_FRONTEND_SERVICES. Otherwise you can check out using a combination of javascript and activex objects ( [http://www.codingforums.com/showthread.php?t=136906] ).
Regards,
Arun Prakash

Download database table content into internal table using Function Module?

HI,
Experts,
I need a function module which can download ddic table content into internal table.
Thank u ,
Shabeer Ahmed.

>
shabeer ahmed wrote:
> HI,
> Experts,
>
> I need a function module which can download ddic table content into internal table.
>
> Thank u ,
> Shabeer Ahmed.
Hi Shabeer,
We don't require a function module to download ddic table content to an internal table. We can use the SELECT statement for the same. Example would be:-
DATA: <INTERNAL TABLE> type table of <DATABASE>.
SELECT * FROM <DATABASE> into corresponding fields of <INTERNAL TABLE>.
Also, function module might be required when you need the data from a remote system, but then it is the developer's task create this function module and the function module should be remote enabled function module.
This remote enable function module should have the above SELECT query as its code.
Many Regards,
Ravi.

How to Down load Data in Application server into the Internal Table

hi freinds,
iam having a file in the application server.
now i need to send the data in the file to the internal table.
is there any Function Module?
i need with out using the OPEN DATA SET and CLOSE DATA SET Keywords.
is there any possible?
Regard's,
Ranjith.

Hi,
There is no other option for uploading the data from the application server to the internal table without using OPEN DATASET and CLOSE DATASET. Even if you find the FM internal logic in FM uses these keywords to read the data from Application server.

Re: How to download an internal table to application server.. Unicode

Hi..
i have populated an internal table of a big structure (custom table) which has more than 100 fields.
i wanted to download it into the application server.. as a tab de-limited file..
Can anyone guide me how to proceed with
Thanks In Advance
Guhapriyan..

HI
this program will convert the internal table to the xml document
Report ZPRUEBA_MML_13 *
Export an internal table to XML document *
NO BORRAR ESTE CODIGO *
REPORT Z_table_xml.
PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
TYPES: BEGIN OF TURNOS,
LU LIKE T552A-TPR01,
MA LIKE T552A-TPR01,
MI LIKE T552A-TPR01,
JU LIKE T552A-TPR01,
VI LIKE T552A-TPR01,
SA LIKE T552A-TPR01,
DO LIKE T552A-TPR01,
END OF TURNOS.
TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
NUMERO LIKE PERNR-PERNR,
REPOSICION LIKE PA0050-ZAUVE,
NOMBRE LIKE PA0002-VORNA,
TURNOS TYPE TURNOS,
END OF SOCIO.
TYPE SOCIO *
ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
SOCIO TYPE SOCIO,
END OF ACCESOS.
ESTRUCTURA ACCESOS *
START OF SELECTION *
START-OF-SELECTION.
PERFORM LLENA_ACCESOS.
PERFORM DESCARGA_XML.
END-OF-SELECTION.
END OF SELECTION *
FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
'0' TO ACCESOS-SOCIO-REPOSICION,
'T1' TO ACCESOS-SOCIO-TURNOS-LU,
'T2' TO ACCESOS-SOCIO-TURNOS-MA,
'T3' TO ACCESOS-SOCIO-TURNOS-MI,
'T4' TO ACCESOS-SOCIO-TURNOS-JU,
'T5' TO ACCESOS-SOCIO-TURNOS-VI,
'T6' TO ACCESOS-SOCIO-TURNOS-SA,
'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
FORM LLENA_ACCESOS *
FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
G_IXML TYPE REF TO IF_IXML,
W_STRING TYPE XSTRING,
W_SIZE TYPE I,
W_RESULT TYPE I,
W_LINE TYPE STRING,
IT_XML TYPE DCXMLLINES,
S_XML LIKE LINE OF IT_XML,
W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_SIZE
FILENAME = GK_RUTA
FILETYPE = 'BIN'
TABLES
DATA_TAB = XML_TAB
EXCEPTIONS
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM DESCARGA_XML *
u can check the link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/conversion of abap data to xml.doc
Regards,
Naveen

Downloading the internal table contents into presentation server

Similar Messages

Maybe you are looking for