Drag and Drop a Portal iView in WPC

I would like to drag and drop a portal iView into a container in the Page Editor.
In a container that allow resource type portal iview, I clicked on the "pencil logo" and click on Add. A "Web Content Browser" is invoked. It there, the portal iView is not found as these iViews are sitting in the Portal Content directory.
Just wondering how do we go about in "drag & drop" a portal iview from this editor.
Thanks

Procedure
3. In the Portal Content Directory (PCD), create a folder for iViews that Web content managers can use on Web pages.
a. Choose Content Administration u2192 Portal Content and create a folder under Portal Content, for example WebPageiViews.
b. Create permitted iViews in this PCD folder (for example, as delta links).
c. Choose System Administration u2192 Permissions and navigate to the folder you created in step a.
d. In this PCD folder, give the everyone group Read permission, for example, and activate the End User indicator.
4. Show the PCD repository in the KM configuration.
a. Choose System Administration u2192 System Configuration u2192 Knowledge Management u2192 Content Management.
b. Choose Repository Managers u2192 Show Advanced Options u2192 PCD Repository.
c. Deactivate the Hide in Root Folder checkbox.
d. Restart the servlet engine.
5. Create an entry point for the folder that you created in step 1d (for example, /wpccontent/iViews).
See next instead of "Step 1d"...
Procedure
1. Choose System Administration u2192 System Configuration u2192 Knowledge Management u2192 Content Management u2192 User Interface u2192 Mapping u2192 Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Web Content Browser Parameters
Parameter                    Description
displaymode                Specify select
maxproviderprio            Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow               Number of entry points displayed in each row (default: 5)
entrypointsprefix
Prefix of the entry point repository If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser. Default: /entrypoints
sharedcontent               Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values:
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder

Similar Messages

Drag and Drop Functionality within the SAP Portal

Does anyone know if SAP Netweaver Portal 6.0 sp18 supports drag and drop technology. A good comparison would be Google where a user can drag iViews around and place them where they would like.
We are trying to build something similar to Google Gadgets with iViews and we would like our users to be able to add, remove, drag, and drop them in the Portal.
Has anyone done something similar to where I would be able to leverage them for further questions.
Any help is greatly appreciated. Thank you.
Jason

Hi
Were you able to find away of using the drag and drop functionality?
I am wanting to use a similar functionality to Yahoo where people can just drag the iViews they want into the page and saving their personalised settings. I am unable to find information as to what Portal release supports this functionality and how it works. Would you be able to help?
Many thanks
Jag

Drag and Drop in ALV

Hi All,
I have the latest version configured. In the ALV, I have new feature to drag and drop the column
in the ALV table so that it's position can be changed.
Because of this my columns settings are getting disturbed.
How to disable this feature.
I have already coded as
lr_model->SET_COLUMN_SELECTION_ALLOWED( abap_false ).
lr_model->set_fixed_cols_left_allowed( abap_false ).
lr_model->set_fixed_cols_right_allowed( abap_false ).
Earliest replies are highly appreciated.
Thomas: Any way to do this.
Regards,
Lekha.

Hi Lekha,
Please refer to the link below. This link elaborates how to enable Drag and Drop functionality in tables. I hope reversing those settings and properties will disable drag n drop feature.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0760510-a2d5-2b10-de9f-d897679696e3
I hope this will help your cause.
Regards,
Sumit

Drag And Drop In Webdynpro Abap

Hi,
Is It Possible For Drag And Drop Option For Text Elements ( not For Images) In Webdynpro Abap..
Do NeedFull Help..

Hi,
Drag and drop option is not possible for Text elements.
It is possible only for Trere,Image,Itemlistbox,Table.
Have a look at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307f2eae-8cf0-2d10-6088-8aa2b1f00b23?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/a5/bf47414eca430794189fbb5919cc2f/frameset.htm
Regards,
Karthiheyan M

Drag-and-drop in Web Center 11g

I'm running the Avitek sample portal on JDev 11.1.1.3 with Web Center on integrated WLS.
Is it possible to enable drag-and-drop of portlets within the page layout - by an end-user?
I understood this was a feature available in Web Center and not in WLPortal - so has anyone got this working?

Webcenter supports drag and dropping of portlets out of the box. You don't need to do anything special to enable drag and drop of portlets.
The only requirement there is, is that users are logged in and they have granted personlization rights.

Drag and Drop functionality in webdynpro java

Hi,
Please check this article
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fec52a-abad-2b10-48b8-cbdfd0dbca62]
Thanks and Regards

Hi raman,
Such kind of drag and drop feture is only supported with CE 7.1 Eph1 onwards. if you have CE 7.1 Eph1 then you will also see these 'dragsourceinfo' and 'droptargetinfo'.
Please check teh version of your installation.
If you dont have CE 7.1 then I am afraid that you cannot implement any such feature using webDynpro. At maximum what you can do is create a browse and collect pattern, which will allow you to select multiple values from one table(Browse Table) and transfer that to other table (Collect Table). We also have many such screens which require multiple selection from one item list to other. And we follow the same technique.
I hope this solves your issue. Please revert back if you require any other help or kindly close the thread.
Thanks and Regards,
Pravesh

How to develop a drag-and-drop feature in JSF

Can someone give me some hints about how to add a drag-and-drop featurn on a HTML page developed in JSF?
For example, on Google personalized page, you can drag-and-drop some components and change their position easily. Can JSF do that, or even better?
Any idea and help is appreaciated!

You're looking for a portal software, with built in AJAX functionality...I'd love that kind of portal software as well.....you might want to look at Sun's portal software.
Regards
Haroon

Drag And Drop Java Portlets

Hi,
How can we develop Drag and Drop (DnD) Portlets. Does Oracle Portlet provide such functionality.Can someone guide me or have any documentation on how to create Java Portlets that can be dragged arround i.e. just like on google site http://www.google.com/ig. I am using 10.1.0.4. Thanks

Is there any kind of documentation available as how to build this kind of functionality. What API's to use. Lifefray and StringBeans Portal provides DnD functionality so curious if it's also doable using Oracle Portal and if so how to start on it. I am more interesetd in docs. and API's to use for building our own.
Thanks

How to drag and drop to desktop

Hi experts,
please see the following scenario:
- We created a report using xCelsius that is technically a Flash file (SWF)
- We included this into an iView
Is there a possibility to drag and drop it to the Windows Desktop (e.g. Pressing the left mouse button and release it on the Desktop as it works for simple images)?
Best Regards and thanks for your help.
Thomas

Hi,
You cannot drag n drop flash to Windows desktop.
Regards,
Praveen Gudapati

Drag and Drop Between Tables

We have 2 table and would like to drag an object from one table (cell) to another. It seems this is impossible at the moment. Dragging works if you add an icon to the first table but the DropTarget element apparently cannot be placed in a table. Why this limitation?

Hi,
A table can have both Drag Source Info and * Drag* Traget Info . Just right click on the table in edit mode to add the above said options. For Drag and drop to take take place the tag present in the Drag source info and drag target info should match.
Have a look at
Link:[Example|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09cc9d7-5403-2d10-f6a1-8705ea280c4e?quicklink=index&overridelayout=true]
Also look at the standard component WDR_TEST_DRAG_AND_DROP.
Kindly post back if you face any issues
Regards
Karthiheyan M

VC Drag and Drop in layout tab

Hi,
I'm fairly new to VC 7.0 and am trying to lay out my model to find that in the layout tab, I am unable to drag and drop items like some of the exercises I am doing instruct me to. I've searched a bit on the forum here and it doesn't seem to be a common occurance so I'm wondering if I'm doing something wrong?
VC level: 700.17.0.1
Thanks!

Hi,
Find the below documents to learn Visual Composer 7.0
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9326072e-0c01-0010-bc97-f72e93338101
Regards
Basheer

I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

When I drag and drop an icon from the address bar to the desktop is does creat the shortcut but will not display the website icon, only the firefox icon, how can I display website icons?

When I drag and drop a website icon from the Forefox address bar to the desk top, the short cut is created but the icon that appears is the firefox Icon. I want to disply the icon from the website that the short cut refers to. I have checked all I can think of in my computer to no avail.

You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
You can usually find the favicon in Tools >Page Info > Media and save the icon there.
Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
Thankyou
Andrew.

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

Why does not drag and drop work?!

Hello,
I am trying to implent a drag and drop from a table to an icon representing a trash.
The drop handler fails in converting the selected rows to a list:
com.sun.el.MethodExpressionImpl@87d9c00d javax.el.ELException: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
Could you help me to understand why? Below are the details.
This is the af:table:
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{bindings.MyView1.collectionModel}"
rowSelection="multiple"
columnStretching="last"
horizontalGridVisible="false"
verticalGridVisible="false" fetchSize="-1"
autoHeightRows="6" width="190"
disableColumnReordering="true">
<af:column sortable="true" headerText="Entry" id="c1"
align="start">
<af:outputText value="#{row.Description}" id="ot1"/>
</af:column>
<af:dragSource actions="MOVE" defaultAction="MOVE"
discriminant="delete"/>
</af:table>
This is the drop area:
<af:image source="Images/empty_trash_32.png" id="i2">
<af:dropTarget dropListener="#{backingBeanScope.DropHandlerBean.dropHandler}"
actions="MOVE">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="delete"/>
</af:dropTarget>
</af:image>
This is the failing listener listener (the failing point is bold):
public DnDAction dropHandler(DropEvent dropEvent) {
DnDAction dnda = DnDAction.NONE;
if (dropEvent.getProposedAction() == DnDAction.MOVE) { // delete
RichTable table = (RichTable)dropEvent.getDragComponent();
//determine the rows that are dragged over
Transferable t = dropEvent.getTransferable();
//when looking for data, use the same discriminator as defined
//on the drag source
DataFlavor<RowKeySet> df =
DataFlavor.getDataFlavor(RowKeySet.class, "delete");
RowKeySet rks = t.getData(df);
if (rks == null) {
return DnDAction.NONE;
Iterator iter = rks.iterator();
while (iter.hasNext()) {
//get next selected row key
System.out.println(rks.toArray().length); // the number of selected rows is ok
List key = (List)iter.next(); // here gives: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
//make row current so we can access it
table.setRowKey(key);
//the table model represents its row by the ADF binding class,
//which is JUCtrlHierNodeBinding
JUCtrlHierNodeBinding rowBinding =
(JUCtrlHierNodeBinding)table.getRowData();
Row row = (Row)rowBinding.getRow();
//delete row;
row.remove();
//activate animation
dnda = DnDAction.MOVE;
return dnda;
thanks.

I did try, I obtained this:
java.lang.NullPointerException
Why NullPointerException?
I don't know if this helps, but consider that the collection model comes from a ViewObject built on three EOs with many fields, although the table only shows one column.
This is the Iterator in my pageDef:
<table IterBinding="MyView1Iterator" id="MyView1">
<AttrNames>
<Item Value="Cod1"/>
<Item Value="Cod2"/>
<Item Value="Cod3"/>
<Item Value="Cod4"/>
<Item Value="Description"/>
<Item Value="Cod5"/>
</AttrNames>
</table>
Any idea?
I will see the Key content with the debugger.

Drag and Drop a Portal iView in WPC

Similar Messages

Maybe you are looking for