Drag and drop in a vertical box
Hi
I was wondering if there's any sample out there that i can check where the user drags and drops the compoents in a verticle box layout and during the DnD operation the dragged component pushes all the other compones up or down depending on the direction in a smooth animated manner, including when the component is being resized.
I do know the Flex ObjectHandles by Marc Hughes component that's what im using right now but then again it does not cover this other requirement that i need.
Thanks.
for those interested (if there is), i've given up on leadselectionpath, and i draw my outline manually, by overloading paintComponent and using the getPathBounds method.
still, i don't know what leadselectionpath means... well, i guess i don't need to know, but if anyone want to share his knowledge...
nicolas
Similar Messages
-
Drag and Drop between two list boxes
Hi all
I am working over Drag and Drop .. i have to implement Drag and Drop between two list boxes .. both list box exist in same page ..each list box have number of rows.. please give me some idea ... as i am new for JSP and Servlet...
Thanks in advance
Regards
VaibhavHi all
I am working over Drag and Drop .. i have to
implement Drag and Drop between two list boxes ..
both list box exist in same page ..each list box have
number of rows.. please give me some idea ... as i am
new for JSP and Servlet...
Something close to what you are looking for is Select Mover in Coldtags suite:
http://www.servletsuite.com/jsp.htm -
iMovie has always let me "drag and drop" transitions, music, text boxes etc into my Project. This morning it is not allowing me to "drag and drop" anything. This is for a client and I am so frustrated. What happened to make it stop letting me "drag and drop"?
I have only dragged Titles to the project. When I did, it worked best not to drag and release onto the video strip (like with the old version) but just above the strip. When you drag and hover above the strip you get a little pointer to the starting point on the strip. Hope this helps.
-
Adobe Presenter 10 Drag and Drop questions - only grey box when trying to create
Hi,
I try to create drag and drop questions in Presenter 10 and after clicking on Add Question -> Drag Drop, the new window opens but where I should be able to define the questions etc, the screen is just grey. Have the same issue on three other systems as well.
Flash is updated to latest version and so is Presenter 10.
Weirdly the installed Flash version is 15, but a right-click into the grey box shows me version 11.
Any ideas?
Thanks,
ChrisJust in case someone else has the same problem, a chat with Adobe brought the solution:
On the gray screen, Right click and go to Global settings
Go to advanced tab
Scroll down and click "Trusted location settings"
On the "Trusted location settings" window, click "add" on the bottom
Click "Add Folder" and select "Local disk c"
Click "Ok" and Confirm on "Trusted location settings" window
Worked for me (on three different machines) like a charm! -
Drag and Drop not supported in TextBox in Automation
Hi All, This is regarding the drag and drop functionality support in text box in Flex automation. I am using the automation API of Flex. since our application is having multiple modules, I had to use the automation swc given as an attachment in the JIRA Issue 1088. ( bugs.adobe.com/jira/browser/FlexEnt-1088) But these swc are not recording drag and drop on to text box. I tried adding the drag and drop events to the AutoQuickEnv.xml for textbox ; but in vain. Any help is appreciated. Regards Gireesh
Hi Torsten
Thank you for this hint!
I've installed NW 7.02 ABAP trial within a win x 64 VM on an ESXi 4.1 VMWare Server.
NSP is running - but shows also the problem described in this thread.
So I tried to solve this issue by applying note1576441 - logged on as BCUSER.
BUT:
I need ACCESS KEYs to modify the relevant SAP objects.
My question:
Where can I get the appr. ACCESS KEYs for the SAP objects I've to correct as described within note 1576441?
Do I have logged on as DDIC or SAP* or ...*
Would be great if you or anyone of this community has a hint acc. to this issue!
Thank you all in advance!
Regards, Stefan -
Drag and Drop FileBrowse​r
I would like to select files from a FileBrowser Tree window (filebrowser.fp) by the Drag -n- Drop method in my GUI. I want to drag a file in the filebrowser, to pull it over a Textbox, and to drop it, so the path and/or the filename appears in the Textbox. I found only one example for 'drag and drop', but it doesnt help, it shows me how to drag-and-drop inside a Tree box, with child items, and so on. (I cannot implement what I saw there due to I am still quite a beginner in LabWin.)
Could somebody give me a short example how to manage this, or a link with an example?
Thank you very much,
best regards,
András B-D.Sorry
ABD -
Problem using text boxes as the "image" to drag and drop over audio file
I have been adding audio files to my page in iWeb (previous version, not '08), but I am having a problem giving them titles.
When you first drag a file from iTunes into iWeb, it provides a space for you to drag and drop a picture. The online iWeb guide also says that you can drag a text box there instead of a picture.
I created a text box with the text I would like to drop over the controller. However, it is no longer allowing me to drop the text box there. I used to be able to do this, and I don't know what I'm doing differently now. Any suggestions?
Thanks!
-- Willfoobar2000 with the ipod plugin will allow you to drag/drop FLAC files and when it syncs the ipod, it converts the FLAC files on the fly. MUCH better than dealing with the crappy iTunes interface and having to pre-convert the files. I absolutely loathe iTunes and it just gets worse and worse!
-
Drag and drop files from Outlook move mails to delete box
Hi everybody,
I'm trying to develop a feature to be able to drag one or several mails from Outlook to my Java application.
As Java doesn't recognize a drop of an Outlook mail, in my program, I assume that if it's not a known file type, it is a mail. (I know it's quite straightforward).
When one or several mails are dropped I use a function from a plugin to get detail from the Outlook mails to import them into my application. In fact it import the data from the current selected mails in Outlook. This function is working perfectly when I use it without drag and drop (from a button 'Import' in the application).
My problem is that when I use drag and drop, mails are imported correctly but sometimes (not always) they are also moved in the delete box of Outlook. I have done several tests to try to figure out what is the cause. I have used several versions of Outlook, I have dropped 1 mail and several mails a the same time, etc...
Here are my tests results: it deletes the mails randomly but it seems to delete more often when my Java application isn't in full screen.
What could be the cause?
Another question: is it possible to configure my drop area to do copies only and not move? When you drag and drop you have a small symbol next to your mouse arrow. It is a '+' inside a square for copy and an empty square for move. My drag and drop does move by default. I could maybe avoid my deletion problem by changing it to copy?!
Cheers.
Edited by: Foobrother on Apr 16, 2009 2:46 AMI think I have fixed it. I still have to make more tests, but it doesn't delete the mails any more for the moment.
In fact, when dropped item is detected as a file I do dtde.acceptDrop(DnDConstants.ACTION_COPY);But if it's not, I just set a variable to say that it is an Outlook mail.
So I have added the line dtde.rejectDrop(); to cancel the drop. And now it seems to work.
Apparently, I didn't clean some stuff when doing an email drop and it still wanted to move the mail or something?!
Anyway, thanks for the help -
Hi all
I want to code a Java application, that when executed, will display a box in a window. I then want to be able to drag a file from windows explorer into this box, and after dropping it in the box, I want the file name to be displayed in the console window. I'm really just interested in doing the drag and drop feature.
Can anyone give me some links or some info that would help me do this?
Thanks very much for any help!Did you try the Drag and Drop tutorial, http://java.sun.com/docs/books/tutorial/uiswing/dnd/intro.html? The section titled "Importing a New Flavor: Files" may be what you're looking for.
-
How to add imge to another image box by drag and drop
Hi all
i am using flex 3.and my problem is to drag an image and drop to another box or image what ever.just need to display the copy of the source image in its drop target.is it possible drag an image?if it is then how?please help me.
thanks and regardsthere are examples of image dragging and dropping here:
http://www.adobe.com/devnet/flex/quickstart/adding_drag_and_drop/
i imagine for your problem, you want the final example, and instead of passing across an integer value, you want to pass across the image source. -
Drop down box drag and drop storyboard
Hello
I'm trying to create an interactive storyboard using the drag
and drop function to drag characters onto a stage so the user can
arrange them however they wish. My problem is that now I have
started this project I have realised I need a lot more images than
first thought and have limited space as this is to go on a website
and have the option to be printed.
Therefore, I have been trying to create a dropdown menu with
tabs with the character name on and when the tab is clicked a box
with all that characters images appears below. Now I managed to
make this work but then when you click between the tabs having
placed the characters on the storyboard, if you click a tab in the
timeline before the one you were on, obviously the character
disappears from the stage. Is there anyway of creating a drop-down
menu or something similar to save space, which can have draggable
movieclips in?
Also my second problem is does anyone know how to create a
duplicateable movieclip. For example, once a character is dragged
from the menu onto the storyboard, it is now only on the storyboard
and there is only one copy. Now I know I could just make loads of
the same character and layer them, but it would be much better if
someone knew of a way to duplicate a movieclip once it is dragged
away so that there is always one in the menu.
Any help would be greatly appreciated as I am fairly new to
flash and am trying my hardest to get to grips with actionscript.
Cheers,
AnnaThanks for your help but not too sure I understand most of
it.
Just working on duplicating characters at the moment and so
far have managed to duplicate once but then can only move duplicate
character and original disappears.
This is the code I have on the movieclip at the mo - any
suggestions very very welcome.
on (press) {
startDrag(this, true);
duplicateMovieClip(this, newname="drag_clip_new", 2);
on (release) {
stopDrag();
Don't know much about depth etc.
Also found this code on the net but am having trouble
changing it to fit my needs:
var mcNum = 1;
var dupli:MovieClip;
mc1.onPress = function() {
dupli = mc1.duplicateMovieClip("mcname"+mcNum, ++mcNum);
dupli._x = mc1._x;
dupli._y = mc1._y;
dupli.startDrag();
this._parent["mcname"+mcNum].onPress = function() {
this.startDrag();
this._parent["mcname"+mcNum].onRelease = function() {
this.stopDrag();
mc1.onRelease = function() {
dupli.stopDrag();
mc1.onReleaseOutside = function() {
dupli.stopDrag();
Again any help very welcome! -
Open dialogue box in Lion is not supporting drag and drop files (UPDATE)
This is freaking me out. Because now in Lion you can't drag and drop file from the desktop (and other folders!) to open dialogue box. It was most usefull function in Mac OS X. Why Apple kill usabillity?
Access to the desktop is not a problem (command + d), but if the current file is located deep in the hierarchy of folders, it becomes a big problem!!!
Dear Apple, please fix it as soon as you can.
UPDATE: Omg, I found the problem, it works only if I drad and drop file on the bottom panel, not in all open dialogue box area:Interesting, this is the second time today I've seen this one come up. It does work, drag and drop works like crazy everywhere here. What does console say when it happens (or not, in your case)?
-
is it possible to drag and drop an arrangement from another music program like Band-ina-box into garage band
GarageBand for iPad is a pretty closed system.
The Song File
You can only open GarageBand for iPad Song Files with the extension .band. Please note that those files look the same as the ones form GarageBand 11. However, they are only upwards compatible but not downward compatible. GarageBand iOS -> GarageBand OSX -> Logic.
Audio Files
You can import a wide variety of Audio Files into GarageBand (via iTunes File Sharing) to use in your Song. But any material from another app has to be mixed down first. Either as a single stereo mix or you mix each track separately and then import those separate files ("stems") into GarageBand. This is a typical procedure to move material to a different app,for example for mixing.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.' -
Drag and drop in same container
I am having a Vbox and have number of panels inside it.
I need to add a drag and drop facility to my VBox so that
using my mouse, I can change the order of panels in my Vbox.Hey thanks Tracy. Here is an another method.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical">
<mx:Script>
<![CDATA[
import mx.effects.easing.Back;
import mx.containers.HBox;
import mx.containers.Box;
import mx.controls.Alert;
import mx.core.IUIComponent;
import mx.events.DragEvent;
import mx.managers.DragManager;
import mx.core.DragSource;
import mx.collections.ArrayCollection;
private var mouseIsDown:Boolean=false;
private var accWin:TitleWindow;
private var atLeastOneNotVis:Boolean=false;
private var graphData:ArrayCollection = new
ArrayCollection();
private function toggleChartAndCb(graphWin:TitleWindow,
graphCb:CheckBox, show:Boolean):void{
graphCb.selected = show;
this.toggleChart(graphWin,show);
private function toggleChart(graphWin:TitleWindow,
show:Boolean):void{
if(show){
graphWin.visible=true;
graphWin.height=150;
}else{
graphWin.visible=false;
graphWin.height=0;
private function
dragInit(graphWin:TitleWindow,graphData:ArrayCollection,
event:MouseEvent,dataFormat:String):void{
if(mouseIsDown){
var ds:DragSource=new DragSource();
ds.addData(graphData,dataFormat);
DragManager.doDrag(graphWin,ds,event);
private function
handleDragEnter(event:DragEvent,dataFormat:String):void{
if(event.dragSource.hasFormat(dataFormat)){
DragManager.acceptDragDrop(IUIComponent(event.target));
private function handleDragDrop(acceptor:TitleWindow):void{
accWin=acceptor;
private function handleDragComplete(event:DragEvent):void{
var initWin:TitleWindow = event.dragInitiator as
TitleWindow;
if(accWin!=null && accWin!=initWin){
var initWinIdx:Number =
initWin.parent.getChildIndex(initWin);
var accWinIdx:Number = accWin.parent.getChildIndex(accWin);
//same parents, just flip
if(accWin.parent==initWin.parent){
accWin.parent.setChildIndex(accWin,initWinIdx);
accWin.parent.setChildIndex(initWin,accWinIdx);
//not same parent
else{
var initChildArr:Array=(Box(initWin.parent)).getChildren();
var initChildSibling:DisplayObject;
for each(var initChild:DisplayObject in initChildArr){
if(initChild.name!=initWin.name){
initChildSibling = initChild;
break;
var initWinRef:DisplayObject=
initChildSibling.parent.removeChild(initWin);
accWin.parent.addChildAt(initWinRef,accWinIdx);
var accWinRef:DisplayObject =
accWin.parent.removeChild(accWin);
initChildSibling.parent.addChildAt(accWinRef,initWinIdx);
override public function localToContent(point:Point):Point{
return point;
private function
checkAndHandleDE(event:DragEvent,cont:Box,dataFormat:String):void{
if(event.dragSource.hasFormat(dataFormat)){
var childArr:Array=cont.getChildren();
var atLeastOneNotVis:Boolean=false;
for each(var currChild:TitleWindow in childArr){
if(!currChild.visible){
atLeastOneNotVis=true;
break;
if(atLeastOneNotVis){
DragManager.acceptDragDrop(IUIComponent(event.target));
private function
checkAndHandleDD(event:DragEvent,cont:Box):void{
var childArr:Array=cont.getChildren();
for each(var currChild:TitleWindow in childArr){
if(!currChild.visible){
accWin=currChild;
break;
]]>
</mx:Script>
<!--Checkboxes-->
<!--I have used checkboxes to show that the panels can be
toggled-->
<mx:Panel width="100%" horizontalAlign="center"
layout="horizontal">
<mx:CheckBox id="panel1Cb" change="toggleChart(panel1,
panel1Cb.selected)"
label="Panel 1" selected="true"/>
<mx:CheckBox id="panel2Cb" label="Panel 2"
selected="true"
change="toggleChart(panel2, panel2Cb.selected)"/>
<mx:CheckBox id="panel3Cb" label="Panel 3"
selected="true"
change="toggleChart(panel3, panel3Cb.selected)"/>
<mx:CheckBox id="panel4Cb" label="Panel 4"
selected="true"
change="toggleChart(panel4, panel4Cb.selected)"/>
<mx:CheckBox id="panel5Cb" label="Panel 5"
selected="true"
change="toggleChart(panel5, panel5Cb.selected)"/>
<mx:CheckBox id="panel6Cb" label="Panel 6"
selected="true"
change="toggleChart(panel6, panel6Cb.selected)"/>
<mx:CheckBox id="panel7Cb" label="Panel 7"
selected="true"
change="toggleChart(panel7, panel7Cb.selected)"/>
<mx:CheckBox id="panel8Cb" label="Panel 8"
selected="true"
change="toggleChart(panel8, panel8Cb.selected)"/>
<mx:CheckBox id="panel9Cb" label="Panel 9"
selected="true"
change="toggleChart(panel9, panel9Cb.selected)"/>
</mx:Panel>
<!--Graph Panel-->
<!--For each row add an HBox and keep the number of
containers same. You just have to change the id of the container
and references to it in various events-->
<mx:HBox id="upperBox" mouseDown="{mouseIsDown=true}"
mouseUp="{mouseIsDown=false}"
dragEnter="checkAndHandleDE(event,upperBox,'objFormat')"
width="100%"
dragDrop="checkAndHandleDD(event,upperBox)">
<mx:TitleWindow id="panel1" title="Panel 1"
showCloseButton="true"
close="toggleChartAndCb(panel1,panel1Cb,false)" width="100%"
height="150"
mouseMove="dragInit(panel1,graphData,event,'objFormat')"
dragEnter="handleDragEnter(event,'objFormat')"
dragDrop="handleDragDrop(panel1)"
dragComplete="handleDragComplete(event)"/>
<mx:TitleWindow id="panel2" title="Panel 2"
showCloseButton="true"
close="toggleChartAndCb(panel2,panel2Cb,false)" width="100%"
height="150"
mouseMove="dragInit(panel2,graphData,event,'objFormat')"
dragEnter="handleDragEnter(event,'objFormat')"
dragDrop="handleDragDrop(panel2)"
dragComplete="handleDragComplete(event)"/>
contied... to next message -
Trying to drag and drop music in slideshow
I want to play 4 songs from my itunes library to play in this long slideshow and when I click on to drag them down into custom playlist box it won't let me drag the music. It highlights multiple songs when I try to drag and drop. what the....am I doing wrong here
I had the same problem.
Instead of dragging the icon with a vertical movement to the bottom, start with a movement to the left to bring the icon outside the window, then go to the bottom, then to the right to bring the icon in the right place.
In short : instead of "to the bottom", do "left, bottom, right".
Maybe you are looking for
-
Refresh Collection Snapshots Error ORA-12008 ORA-01555
Need some insight! Ct is implementing R12.1.1 ASCP using existing 11.5.10 EBS as source. In source EBS, when running Refresh Collection Snapshots (RCS) in COMPLETE mode, we encounter this error: ORA-12008: error in materialized view refresh path ORA-
-
Ipod is disabled how to connect to itunes
ipod is disabled how to connect to itunes
-
I am really fed up with LOSING my artwork - I have over 66,000 tracks ALL of which had artwork when I added them to my iTunes - I now regularly find missing artwork, or a black or white square which it is impossible to delete or replace. I have only
-
An error occurred while downloading iOS 7
I keep getting an error occurred trying to download iOS 7. What can I do?
-
After installing Snow my Apps boot once and then will not boot again. I believe this is a pemisions issue; I did run fdsk as well as repair permission from the Snow DVD... Again on first run the apps work, then wwhen rebooted they bounce and fail to