Drag variety of movie clips with one script

Hello,
I am sure that this has been asked or answered before, but
could not locate the correct response.
Problem:
There are 20 movie clips loaded onto the stage through
actionscript. I have 20 different onPress scripts to start the drag
for each (which also contain custom variable).
Problem, I have one single onRelease script which is to be
used for each, but do now wish to give 20 custom handled scripts.
Can I somehow use certain scripting for using one single
generic script for the onRelease? So no matter what was released it
will go through this one script.
Thanks
D

something like
upListener = new Object();
uplistener.onMouseUp = function (){
doSomething();
Mouse.removeListener(this);
and the line
Mouse.addListener(upListener);
in every onPress action could do.
[Code not tested, likley full of typos - but hopefully useful
as a general example;]

Similar Messages

Movie Clips with one Frame

If I have SWF's that I am using for UI elements in a game, and in these SWF's there are layers with Movie Clips and these clips have only one frame in them - do I need to explicitly put a stop() in there for optimal performance?
I'm curious if these movie clips sit there and loop with only one frame and in the end hurt the game's overal FPS
Any insight would be appreciated

please don't cross-post.

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

Noob help: Triggering Movie Clips with Buttons

Hi guys,
I'm taking an intro Flash and Action Script class and for my final I need to create a portfolio project that contains 5 unique buttons that trigger 5 unique movie clips. I'm having a hard time with this. I've been able to trigger the 1st movie clip with the first button (although I can't stop it) but I can't trigger any ohter movies with any other buttons.
Here's my code:
stop();
chuck1_btn.addEventListener(MouseEvent.CLICK, playMovie);
function playMovie(event:MouseEvent):void
    spaceship_mc.play();
chuck2_btn.addEventListener(MouseEvent.CLICK,playSaucers);
function playSaucers(event:MouseEvent):void
    saucers_mc.play();
Nothing happens when I click on chuck2_btn when I test the movie. I think I need to create a variable or class but I'm not sure. I'm a super noob with this stuff. Any thoughts? Thanks!
Rick

You should learn how to use the Help documentation to find answers like how to use the visible property. For the code you showed earlier, here's what you can try in frame 1 to replace it.
stop();
spaceship_mc.visible = false;
saucers_mc.visible = false;
slideshow_mc.visible = false;
chuck1_btn.addEventListener(MouseEvent.CLICK, playMovie);
function playMovie(event:MouseEvent):void
     spaceship_mc.visible = true;
     saucers_mc.visible = false;
     slideshow_mc.visible = false;
    spaceship_mc.play();
chuck2_btn.addEventListener(MouseEvent.CLICK,playSaucers);
function playSaucers(event:MouseEvent):void
     spaceship_mc.visible = false;
     saucers_mc.visible = true;
     slideshow_mc.visible = false;
    saucers_mc.play();
etc...
It could be refined, like having a function that hides everything and using that every time before making the one you need to show visible. You might find it necessary to include telling the movies to gotoAndStop(1) as well.
That's about as generous as I'm going to get. It's important that you learn things, and handing you a solution isn't going to help do that.

How do you combine two or more movie clips into one movie clip in iMovie '09

how do you combine two or more movie clips into one movie clip in iMovie '09

First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
When finished, use the SHARE menu to share the project.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

Changing depths of movie clips with button clicks

Hello all,
I've got a file on working on that has 4 different movie clips on one layer that, when clicked, will zoom in (made with tweens in the timeline).
The issue I'm having, is that when I click one of them, they are arranged in a way that won't work for what I need. I click one, and it works, but it is hidden by the movie clip that is on top of it in the heirarchy. Click another, zooms in, but is partially hidden by another one.
My question is: Is there anyway in AS2 to code these so that when one is clicked, it will the top spot in the heriarchy? So that I can code them all like this so that whenever one is clicked, it goes to the top so it is not hidden?
Thanks

Correct me if I'm wrong, but isn't that just used to swap 2 movie clips?
Or is there a number I can input instead of the movie clip name that will change all of them?

Drag and Drop Movie Clips onto Plugin

Hi All,
We've built a plugin for Adobe Flash CS5.5, with a tree control in the plugin.
We wish to be able to drag and drop movie clips from the canvas onto the plugin. Wondering if anyone could point me in the right direction?
regards,
-amit

Hi,
If you are developing the plugin in Flash, have you tried to listen to NativeDragEvent.NATIVE_DRAG_ENTER and NativeDragEvent.NATIVE_DRAG_DROP ?
Once the plugin behaves like an AIR Application, you should have access to its API.
I hope it helps !

Copying movie clip with flv

Hi, I am trying to copy a movie clip with an flv in it from
one project to another. Everything works fine except the flv just
keeps trying to load and never plays. I am not sure what to do. Any
suggestions?

It sounds like you are using the FLVPlayback component to
display the FLV, in which case, the FLV is a separate file and
likely needs to be in the folder next to the new project. Go back
to the old project and copy the FLV from its location there to the
new projects folder.

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

Moving movie clips with ActionScript

I am trying to move four movie clips with actionscript in a
circler motion with two buttons, one to rotate the mc’s to
the left and one button to rotate the mc’s to the right. Here
is a link to what I am trying to do;
http://www.us.playstation.com/Lair/
and it is undrer game features.

Yes, that's what the code I gave you is intended to do....
you replace that code with whatever action you need to take to turn
your movie around.
I have no idea what your movieclip is doing, but I'm guessing
by your response that if it was an arrow pointing left to right
(just an example), you want it to be pointing right to left when
the left arrow is pressed. If you want an immediate turn around,
then the simplest way to do that is to have another frame
containing the movieclip that it moves to where it faces the other
direction--and to have it appear turned around, from the toolbar
you select Modify -> Transform -> Flip Horizontal.
So the movieclip would live inside another movieclip that has
two frames with stop()'s for each frame. In the first frame you
would have the subclip facing left to right, and in the second you
would have it facing right to left. If we call that 2-framed
movieclip "walker", the code I provided before would
become...

What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

Per http://www.apple.com/ipad/specs/
AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Check for movie clips with AS?

Is it possible to check if a frame contain a movie clip with
AS, and then if movie clip is found run a function? Like a global
"event handler " for movie clips.

I want a function that automaticly can detect and fade in any
movie clip found in any keyframe in the main timeline. So i don't
have to make
In the first keyframe in the main timeline
on (ohh here i found a movie clip)
//let's run a nice fade function on that movie clip
mx.transitions.TransitionManager.start
(eval(TheClip),
{type:mx.transitions.Fade,
direction:0,
duration:1,
easing:mx.transitions.easing.None.easeNone,
param1:empty,
param2:empty
Something like that

Exporting a move clip with alpha channel

Hi there,
I’m trying to export a move clips with alpha channel.
I’m trying to export an animation with Premiere CS5. I made an animation of a rotating object in Maya and exported it with alpha channel as tiff images. Then they are edited with Photoshop to give them a drop shadow.
My problem is this. Can I export this tiff animation with the alpha channel?
My plane is to use move clips over backgrounds in a game – depending on the result there are different animations playing on top of several different backgrounds. There for the objects has to have a transparent/alpha channel over the backgrounds.
Again the reason for this is the complexity of the game and to make the game looking as real as possible. I’m hoping for some help here to make my plan possible
…thanks

Thanks alot for the help.
But now I’m wondering how to get the file size down?
The 32bit and alpha channel just increase the file size from about 1MB to 9,3MB, which is pretty much??
…any ides mate?

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

Drag variety of movie clips with one script

Similar Messages

Maybe you are looking for