Dragged WAV file in- pitch and tempo went down, ***?

Dragged a WAV file, recorded on a handheld recorder, into Logic. The pitch and tempo went down! When I play the original with Quicktime it's no prob. How can I correct this?

Set the song sample rate to match that of the audio files. You can see the sample rate in the audio bin window.

Similar Messages

Hw can I determine the pitch and tempo to be set for a song?

I want to know how to determine the pitch, tempo, scale for any song in Garage band.
My problem is this: I have ready with me a number of songs which I have composed, but I do not know what their musical attributes are...having received no training in music! Whenever I open a new project in GB, I have to set the pitch and tempo for the project beforehand itself...am asked to do so. This makes it impossible for me to try out the music at different pitches and tempo to determine what is required for any song.
I hope I am making myself understood and hope to get a solution...[and, no, Iam not minded to go and join music classes!]
Thanks in advance.

Thanks for all this information. I can only vaguely understand what you have outlined.
I am sorry - it is difficult for me to explain, if I cannot assume that you have a musical training.
Is the first step you have asked...'using the tempo and key settings of another of my songs' a necessary one? Can I go ahead with the rest of the steps omitting the first?
You have to set some values for tempo and song key. Finding a song, that is similar to a new song you want to create, and were you have written sheet music with the song key and tempo would give you a good first guess for the values to pick. But go ahead and use the default settings of GarageBand.
Then you can add rhythm loops (drum loops from the loop browser) to generate an accompaniment conforming to the tempo you found.
That is what I tried to describe in the second half of my post: A click track is a track similar to a metronom. You sound out the beats of your song by clicking or clapping and record this as a "click track". Adjust the Master Track "Tempo" automation curve, so that you will have four of your or claps in each measure. This way GarageBands tempo setting will follow the tempo of your song.
Now you can drag loops from the loop browser to create an accompaniment. It will follow the tempo changes. I suggested the drums or other percussion instruments, because for these instruments the song key will not matter.
How to adjust the Master Track Tempo: From the "Track" menu > Show Master Track; then set the Pop Up menu in the Track Head to "master Tempo".

Karaoke. I bought some karaoke midi from iTunes. I imported and am unsure how to raise or lower the pitch and tempo

I have some karaoke files from itunes. I think there are a couple of ways to raise or lower the pitch and tempo. I can't seem to get it to work.

To change the tempo, select the track head in the timeline and enable "Follow Tempo & Pitch" in the Audio Editor. Then you can change the tempo in the LED display, if it is set to "Project" view.
To change the pitch, select the track, open the "Inspector", go to the "Edit" tab", click an empty brick and add an "AuPitch" filter. Raise or lower the pitch wheel (in cents, 100 cent equals one semitone step).
Regards
Léonie

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

Hello djensen1x,
Could you please let me know what version of Acrobat are you using.
Also, tell me your workflow of combining those PDF files?
Please share the screenshot of the error message that you get.
Hope to get your response.
Regards,
Anubha

Charged battery says 8hrs, used for 2min and it went down to 4hrs....Why?

I fully charged my macbook (purchased 11/09). The battery icon at the top of screen said i had 8hrs remaining. I used the laptop for 2 mins on the internet and checked to see how much time it used up ( I believe when I bought the computer it said something about the battery charge lasting 7hrs and I new I wasn't getting this). The battery icon said I had 4hrs remaining. Why did the time get cut in half when I only had the computer on for a few mins?

I just had a similar experience, but in reverse. I had been using my Macbook for about an hour and a half, and it went down to 20% (and it said that I needed to replace it soon). I quit my browser, and the battery immediately jumped up to 55%, and no replacement message.
From what I gather, it has something to do with recalibrating batteries, but in your case, your battery is pretty new, so that doesn't really make sense.

Add loops to Arrange without sync Pitch and Tempo

I recently purchased a package of Audio loops. This package contained audio files in wav and AIFF format. I tried to add the AIFF loops to Loop browser and Logic but it didn't work. The pitch of the loops would change as I dragged them toward the arranment. So I removed them from the loop browser and tried to use the wav files dragging them from the File Folder and when the only to get the same results. It's strange because when I play them on itunes or other programs they're in the right pitch, but as soon as I transfer them to logic the pitch changes.
How can I use these loops in Logic without changing the pitch?

If they are Apple loops...
Use the aiff versions.. and select the region created when you added the loop... Now use transpose in the Region Inspector on the left of the Arrange window.. to set the loop to play at the correct pitch for your piece.
If they are not Apple loops.. use the transpose function as described above and then stretch/flex the region to fit the tempo of your piece.

How to load .wav files in LabView and vi for TDM,FDM,QPSK,ASK

Hello
I am doing my project in LabVIEW that is VIRTUAL TELEPHONE COMMUNICATION SYSTEM
AND APPLICATION OF LABVIEW IN ADVANCE COMMUNICATION TECHNIQUES.I have implemented every block till date but for the rest part of my project that is advance communication techniques i need vi for QPSK,TDM,FDM,ASK and I just wanted to know how to load .wav file in LabVIEW
Please assist me for this
Attachments:
Telephone communication process.docx ‏25 KB

Hi Dilpreet,
reading wav files is easy using the functions from the sounds palette...
For your other tasks you could use a seperate toolkit or do some programming on your own!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Opensource Software to edit and play wav files for CUCM and CCX

Helo everone.
I would like to konw a opensource or free software to edit, play and codec wav files for prompts in CUCM and CCX.
Thank you.
Best Regards.

I autoanswer myself.
http://www.hongkiat.com/blog/25-free-digital-audio-editors/
I'm cheking audiocity and is very easy to use.
Regards

Blackberry 8330 - can't play wav files - Red X and "unknown error occured"

I have a client that started having an issue with her blackberry after we moved to BES Express 5.02. Her .wav file association on her computer was changed so she couldn't play .wav files on her PC. Then she stated getting a red X on her phone when trying to listen to the Cisco unity voice mail messages that are attached to emails.
I was able to correct the issue on her PC by re-associating the .wav file with windows media player.   However on the blackberry, the .wav file still will not play. Is there a file association section on a blackberry device? If not what else might be the issue?   she is the only person having the issue. I don't use a blackberry so i don't know the menu options very well.
Thanks
Steve.
P.S.
Oh, The phone was factory reset before being added to the new BES, Service books and IT policy Applied correctly.   I could pull the phoen and reset it again but I don't know if that would correct the issue.

Hi - I am now having this same exact problem on my Mac laptop.   I have many Breaking Bad, etc TV shows that I purchased through itunes & have watched over the years & now all of those, as well as, any new shows I purchase will not play on my laptop.    Just same as above person -- a black screen that appears to be playing movie (the timer is actually playing) but no video or sound.    Shows / Movies all work fine on my home computer.
On my laptop it keeps saying .. "Not authorized to play .... & then says "Sign into Itunes.. "   - but I do sign out & sign back in & still nothing happens.   Very annoying and frustrating as I can ususlly figure things out with perserverence and trial & error.

Downloaded songs frome itunes and internet went down and they will not play and it also caused other songs not to but most will what do i need to do wiyhout erasing everything

downloaded songs from itunes and the internet went down and they will not play and also caused other songs already downloaded not to play what can i do

You can try a couple of different things. First - restart the iPod and see if the songs will play.
Restart the iPod by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't help - delete the songs and then download them again. You can download purchased music again at no charge as long as you use the same Apple ID that you bought them with originally and as long as you live in one of these countries.
Previously purchased music is only available through iTunes in the Cloud in Argentina, Australia, Belgium, Bolivia, Brazil, Canada, Chile, Colombia, Costa Rica, Cyprus, Czech Republic, Dominican Republic, Ecuador, El Salvador, France, Germany, Guatemala, Honduras, Ireland, Luxembourg, Malta, Mexico, New Zealand, Nicaragua, Panama, Paraguay, Peru, Slovakia, Spain, Switzerland, the United Kingdom, United States, and Venezuela.
If you are running iOS 5 on the iPod - You can delete songs by swiping across the song in list view to bring up a red delete button. Tap the button to delete the songs. Download the songs again in the purchased tab in iTunes.
Downloading Past Purchases

Paid off $8000 of CC debt and score went down!????..HELP!

Got some advice here on the forum a little over a month ago. had some money to pay towards outstanding debt and got solid advice as far as what to pay off to have the most impact on my score. Heres were i was to begin with and were i am now in regards to debt. chase slate cc.............................................$3050 balance and a $3200 limit.Chase freedom cc......................................$6000 balance and a $6000 limitCapital one cc.............................................$2050 balance and a $2500 limit. AFTER:Chase slate.................................................$0 balance and $3200 limitChase freedom...........................................$2700 balance and a $6000 limitCapital one..................................................$0 balance and a $2500 limit. I have a few other issues on my CR that have remained the same. Short sale a little over 3 years ago. ex wife and i got stuck with a $10,000 balance we pay at 0% interest. She has made two (2) 30 day + late payments here and there is nothing I can do. have contacted the owner of the debt and they have us both on the hook for the now $7000 balance and will not give that up no matter how I plead. I pay half and she pays half. I also have 2 collections on there. one is about 3 years old, medical for $520 and the other is pretty new. $100 and I have zero idea where it came from..my guess is the ex wife as during our year long divorce I was forced to keep her covered under my health insurance policy and im guessing she went to the doctor and never ponied up for copay. I never ever received anything in regards to this and have no clue what it is for. I make $60,000 annualy so I think my debt to income ratio is fairly good. No car payment. havent pulled my fico scores through MY fico but have used credit karma and my score with transunion went down 2 points to 540! and my equifax remained the same at 601. not sure about the accuracy of Credit karma, My girlfriend also uses it she is listed at 798 and her actual fico is 802. All her scores are within 5 points. also used bankrate.com and they give me 605. To put things in perspective transunion had me at 672 in january and equifax had me at 660. I was forced to use apply for and use the above cards due to divorce costs ($34,000 total, yeah obscene I know) and almost max them resulting a large drop but since paying them I dont understand why no change. I used annualcreditreport to pull my 3 free reports and they show almost all of the reduced balances. One doesnt show the cap 1 card as paid off. I am at a loss here as to what to do. Help!

Sheffernan wrote:
Got some advice here on the forum a little over a month ago. had some money to pay towards outstanding debt and got solid advice as far as what to pay off to have the most impact on my score. Heres were i was to begin with and were i am now in regards to debt. chase slate cc.............................................$3050 balance and a $3200 limit.Chase freedom cc......................................$6000 balance and a $6000 limitCapital one cc.............................................$2050 balance and a $2500 limit. AFTER:Chase slate.................................................$0 balance and $3200 limitChase freedom...........................................$2700 balance and a $6000 limitCapital one..................................................$0 balance and a $2500 limit. I have a few other issues on my CR that have remained the same. Short sale a little over 3 years ago. ex wife and i got stuck with a $10,000 balance we pay at 0% interest. She has made two (2) 30 day + late payments here and there is nothing I can do. have contacted the owner of the debt and they have us both on the hook for the now $7000 balance and will not give that up no matter how I plead. I pay half and she pays half. I also have 2 collections on there. one is about 3 years old, medical for $520 and the other is pretty new. $100 and I have zero idea where it came from..my guess is the ex wife as during our year long divorce I was forced to keep her covered under my health insurance policy and im guessing she went to the doctor and never ponied up for copay. I never ever received anything in regards to this and have no clue what it is for. I make $60,000 annualy so I think my debt to income ratio is fairly good. No car payment. havent pulled my fico scores through MY fico but have used credit karma and my score with transunion went down 2 points to 540! and my equifax remained the same at 601. not sure about the accuracy of Credit karma, My girlfriend also uses it she is listed at 798 and her actual fico is 802. All her scores are within 5 points. also used bankrate.com and they give me 605. To put things in perspective transunion had me at 672 in january and equifax had me at 660. I was forced to use apply for and use the above cards due to divorce costs ($34,000 total, yeah obscene I know) and almost max them resulting a large drop but since paying them I dont understand why no change. I used annualcreditreport to pull my 3 free reports and they show almost all of the reduced balances. One doesnt show the cap 1 card as paid off. I am at a loss here as to what to do. Help!The answer to your question is - Its Credit Karma! Some other observations: 1) A 2 point change is not a drop - thats noise.2) your annualcreditreport.com pull showed the Cap One balance - Obviously it has not hit your reports yet. So thats two of three cards with a large balance. No prizes awarded for that. Once you get the Chase Freedom balance under $600, and the Cap one balance reports - THEN check your scores out. One last question - is there any charged off revolving accounts showing an unpaid balance?

Error message when dragging wav files into iTunes

I am getting an error message recently "There is not enough room on '''' to copy all of the requested files. iTunes will copy as many files as possible." No files end up getting copied. I have a 60GB video with only 22 used. I have dragged files before with no problem. I have tried deleting some files that I don't really listen to and it will help to free up some space for one or two more files, but I shouldn't have to do this at this point. Any clues?
Compaq Windows XP Pro

Link longest file support, why Box (not Linux support) and Ubuntu (went down in July)?

Mozilla Thunderbid dont allow Dropbox to link longest file in emails, but Box and Yousendit dont support Linux Sync, then what can I do when Ubuntu go down in July ?
Thanks

OK, I will try to correct my bad English (sorry) in the question:
I am talking about "Filelink for Large Attachments" in the Thunderbird program.
Configuring Filelink according to this link: https://support.mozilla.org/en-US/kb/filelink-large-attachments
When I select the menu option: Edit | Preferences | Attachments and click on the Outgoing button, the Thunderbird program show me Ubuntu One as the "service provider", but Ubuntu One will be down on July 2014, then I try to add a new service provider clicking in the add button and Thunderbird show me the window "Set up Filelink" with a drop-down list with only 2 service providers: "Box" and "YouSendIt" but nobody of this service providers works with Linux for Sync. then this is (or are) my question: What can the Ubuntu (Linux) users can do to replace the Ubuntu One ? If Thunderbird and Mozilla is and strong partner of Ubuntu (Linux), why is there not any other service provider, like "DropBox" (for example) in your Drop-down list ?

Record GSM and ADPCM in wav files

Hello,
is there any way to record .wav files using GSM and ADPCM format(tritonus implementation for example). I need to record .wav files in this formats and send then through a network to another computer.
Is somebody has a code example please, post it or send me it to my e-mail:
[email protected]

why these files don't work in iTunes 5. Perhaps there is a bug in iTunes?
A bug or a new "feature". ;-)>
The problem is unique to iTunes 5, as I said - I had no problems with any iTunes version through 4.9.
The important thing is I will still have access to the files for classroom use (and I also just plain listened to them as well).

Cannot view wav files in folder

I transferred wav audio files from a PC to my MAC external hard drive using MAC DRIVE Standard. When I view them on my MAC the folders are there but when I open them the wav files are not visible, just the jpg file. ITUNES will import the wav files, play them and will also view them in Finder. How do I make them visible on my external hard drive?

I transferred wav audio files from a PC to my MAC external hard drive using MAC DRIVE Standard. When I view them on my MAC the folders are there but when I open them the wav files are not visible, just the jpg file.
When I use Finder to locate the folders with wav and jpg files on my External Hard Drive and copy a folder to my Internal Hard Drive, only the jpg file copies.
Both those statements you made tell me you never copied the wav's to the external in the first place contrary to what you believe. I can't tell you what went wrong with your wav copying but I believe the wav's can't be seen on the external drive because they are not there in the first place.
As a confirmation of this perform the following steps in terminal.
1. Type ls -la followed by a space. Then drag the questionable folder into the terminal window. You should see a line resembling something like:
ls -la /path/to/folder
2. Hit return an look at the list of files you see. Are there any .wav's there? Probably not.

Dragged WAV file in- pitch and tempo went down, ***?

Similar Messages

Maybe you are looking for