Dreamweaver 8 and CF 8 Setup with Database
In Dreamweaver I'm trying to set it up to connect to my
database but its not working.
I have CF8 and mysql 5.0x installed locally, and I have
dreamweaver 8 installed. I also installed some Microsoft thing it
required prior to installing CF8. In the CF admin I created a
datasource called
mysql5 with the MySQL 4/5 driver. It has a database called
coldfusion that I created. I installed the CF8 extension
update for dreamweaver 8.
In dreamweaver I have my site setup, document type and sites
testing server. So when I go to the Application box and on the
Databases tab it has 1, 2 and 3 checked. But 4 and 5 are not
checked.
#4 is saying I need to Specify the RDS login information for
CF server. When I click it gives me the following error message:
quote:
The server name or address could not be resolved.
Possible Reasons:
1. The URL specified for this site's testing server may be
incorrect:
http://127.0.0.1:8500/
2. The testing server my be incorrectly configured (for
example, ColdFusion may not be running).
CF is running and
http://127.0.0.1:8500/ is where
it is setup up. I have no idea how to fix this.
when you were installing cf8, did you select to enable RDS
and did you
specify RDS password? if not, i am afraid you will have to
re-install
cf8 and enable RDS at setup time...
there is some technote on how to enable RDS via manually
editing some
.xml file in cf, but it has never worked for me - i had to
re-install
cf8 to fully enable RDS.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/
Similar Messages
-
Dreamweaver CS3 and Mac OS 10.4.11 Incompatability
I have been using Dreamweaver CS3 under OS 10.4.10 for a few
months without significant issues... but after upgrading to 10.4.11
there is a significant problem.
I am unable to access any of my remote servers to upload
files to the sites I have built.
I was able to reinstall Dreamweaver 8 and it works fine with
all the same setups
I've read a technote on a noted problem with Dreamweaver CS3
and Mac OS 10.5 - but it also appears to happen on 10.4.11
You can read the 10.5 technote here:
http://www.adobe.com/go/kb402780I have not experienced this problem. Try removing the DW CS3
preferences file in your Library and then let DW build a new one.
BTW, what error you are getting when you try to FTP? -
Placing an Image in Dreamweaver CS6 and Mavericks
To place an image in a web page, I have always been able to drag the file (say jpeg) from the Macintosh Finder and drop it into the web page. I'm using Dreamweaver CS6 and it worked fine with Lion, but stopped working with Mavericks. Can anyone tell me how to turn this capability back on?
No image is placed. Nothing blows up. And I can't find a preference setting to turn this on. It's a mystery to me why this is happening.
I write software for the Mac (WildTools) so I'm pretty good at debugging things, but this has be stumped. -
Synchronize with database problem
Hi,
I'm using JSF ADF BC, I have two tables in database, I've added new field to each, I go back to jdeveloper, and right click on both entities and click on synchronize with database, select new field that I've created and everything works fine, then I go to view object and here is the problem, in first view object I can add newly created and synchronized field like supposed (mapped to column or sql), but in the second view no matter what I do it is alway created as transient, I've tried deleting and synchronizing couple of times, changing properties, going to view row impl, view.xml, but it's always the same problem. Please can anyone help, I don't want to create whole view from scratch, every association, view link etc.
Thanks in advance,
TomislavHi,
on view object editor screen, put your cursor on "Attributes" (left side of the screen) then click "NEW" button (on the right side of the screen), then fill in Attribute Name, check the "Map to column or SQL", and fill in query column. You are done. -
How to use JDBC to connect Tomcat with database server?(Urgent!)
I try to deploy the tomcat and make it connect with databaser server.
I am using mysql connector J 3.0. I added the CLASSPATH of mysql-connector-java-3.0.7-stable-bin.jar in the tomcat.sh .
I also add the web application in server.xml.
When I start tomcat, I can see using Classpath including mysql-connector-java-3.0.7-stable-bin.jar .
But when i browse my jsp including the jdbc, wait for a while, I get a message as following: Timeout on server localhost. My web server and database server is same computer.
Could you tell me what's wrong?Did you check to see that the MySQL database was indeed up and running, and accepting connections when you started Tomcat? Did you make sure that your firewall permits connections to the database?
Timeout errors generally occur when you send a request to a server and the server does nothing with it - i.e., it doesn't respond to it in any way. Most firewalls are configured this way. If I telnet to your machine and I get "connection refused", I know your machine exists and I can try hacking into it. If I telnet and get nothing at all, then I will either assume either there's no actual machine at that address or it's unresponsive. -
I was using Dreamweaver MX2004 befor and now am trying to use Dreamweaver CS4. and not very familiar with it
My question is:
Is there is a parameter or option that I hsve to set in the Dreamweaver preferences so that I can modify attributes
to text without having to create a CSS rule? Because actualy, everytime I want to modify the appearance of text I am asked to create a new CSS
Tank you for your attention
BertI'm afraid that you will have to tough this one out and learn some CSS. There is no way to retrograde DWCS4 so that it works like a version that is 4 years older.
Once you spend a few minutes on this task, you'll wonder what all the angst was about. It's really very simple. And you will have to get beyond the old (and BAD) habit of styling your content using the Property inspector.... -
Database setup with MySQL and PHP question
Hello all,
I recently had a problem getting a report to work for a site I was updating. This site is written in PHP with a MySQL database. The application is to track customer calls to auto repair stores. The database has a lot of foreign keys because they wanted to update information in only one spot and have multiple records be updated all at once. So, I've got all the information from individual calls saved in the call_log table, and have foreign keys to reference information in other tables (for example this table lists what store received the call referencing the store table). If a store changes locations, they want to have reports automatically update with the new address, connection to conversation number, etc.
In one of the responses to my question on how to get this report to work, I was told that this could be done without using foreign keys (by Normalizing the database using mapping tables). I am still a newbie to MySQL, and after looking though a lot of manuals, tutorials, and forum posts, I am more confused now than ever.
I got the report to work using the foreign keys, but I would like to learn what I should have done with the database (and how to get the information displayed).
So for example one report would be displaying the following:
Store Reason for the Customer Call
breaks oil change shocks tune up total calls
5636 - Bloomington 2 4 0 2 8
8875 - Duluth 1 6 4 8 19
with links on the store name to pull up the information on that specific store. How would I change the database (listed below) to do this without foreign keys? Any help would be greatly appreciated.
call_log (table that contains the following:)
call_id
conv_number
date
camp_type (foreign key to the campaign table so it displays the campaign_id)
reason (foreign key to the call_reason table so it displays the reason_id)
location (foreign key to the store table so it displays the store_id)
associate
call_summary
trainig_issue (foreign key to the training_points table so it displays the training_key_id)
visit_closed
example (foreign key to the example_type table so it displays the example_id)
campaign (table that contains the following:)
campaign_id
campaign_name
campaign_promotion
campaign_coupon
campaign_startdate
campaign_enddate
call_reason (table that contains the following:)
reason_id
reason
store (table that contains the following:)
store_id
store_number
store_address
store_city
store_state
store_postalcode
store_name
store_phone
store_email
store_mgr
training_points (table that contains the following:)
training_key_id
key_issue
policy
example_type (table that contains the following:)
example_id
example_name
example_image
Thank you very much.Frankly, that is way to much of a question to be answered in detail on a forum... There's a lot involved and a lot of general database understanding required. I would highly recommend:
Database Design for Mere Mortals: A Hands-On Guide to Relational Database Design, Second Edition -- by Michael J. Hernandez
This is an invaluable book to get you going in the right direction and on a firm foundation.
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer -
I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
Maybe there is a newer setup installer? But I can't find it.
[10:42:54]: Error:
:Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read returned true. so far, this is OM DB, not an empty DB
[10:42:54]: Debug:
:Connection was not open. We will try to open it.
[10:42:54]: Debug:
:SqlConnectionReady returned True.
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Info:
:Info:isOMDatabase: Read did not return true. The MG is missing. This is not OM DB
[10:42:54]: Info:
:Info:Using DB command timeout = 1800 seconds.
[10:42:54]: Always:
:Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.
[10:42:54]: Info:
:Info:DatabaseConfigurationPage: DB connection attempt completed.Never mind, found it!
Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
CLR Types for Microsoft® SQL Server® 2012 and now it works!! -
Problem with database in dreamweaver 8
Hi,
I am workting with Dreamweaver 8 and WAMP5 1.4.5 (php 5.1
Apache 1.3 MySQL 4.1)
I have created a connexion MySQL in Dreamweaver 8
When I open "database" in the application panel I can see the
4 tables of my database but when I click on each table to see the
fields it doen't show any and indicate there is no field.
THANKS in advance for you HELPLet's start at the top. What is your Operating System? What
do you see
when you point your browser at ''
http://localhost''?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Springbok_yfc" <[email protected]> wrote in
message
news:ectqni$3cg$[email protected]..
> Hi there
>
> No too long ago I purchased Dreamweaver 8 and I am
currently designing a
> website for an organisation but I am having diffculties
setting up the
> Access
> Database..I have no problem with connecting Dreamweaver
8 to the database.
> So
> in order to get a solution to my difficulties I have
been doing alot of
> tutorials that I got from online, but for some reason
after I have done
> everything the tutorials asked of me and its time to
preview the live
> data..a
> pop up message appears saying the Page cannot be
displayed. Is this a
> glitch
> within Dreamweaver 8 itself? And if so will the updates
be able to fix
> this
> problems? What I would really like to do is store news
etc...in a database
> and
> then have the database shown on the website as a news
archive. Can anyone
> please help me with this?
>
> Kind Regards
> Heinrich
> -
Dreamweaver 8 problem with database panel
Hi,
I am workting with Dreamweaver 8 and WAMP5 1.4.5 (php 5.1
Apache 1.3 MySQL 4.1)
I have created a connexion MySQL in Dreamweaver 8
When I open "database" in the application panel I can see the
4 tables of my database but when I click on each table to see the
fields it doen't show any and indicate there is no field.
THANKS in advance for you HELPHi, Thanks for your quick answer.
I just shutdown my database and restart but no errors displayed.
However, the trace file displaying :
Dump file F:\8i\oracle\admin\INTRANET\udump\ORA01704.TRC
Fri Apr 07 09:29:42 2006
ORACLE V8.1.7.3.0 - Production vsnsta=0
vsnsql=f vsnxtr=3
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Instance name: intranet
Redo thread mounted by this instance: 1
Oracle process number: 12
Windows thread id: 1704, image: ORACLE.EXE
*** SESSION ID:(11.1) 2006-04-07 09:29:42.859
Error in executing triggers on database startup
*** 2006-04-07 09:29:42.875
ksedmp: internal or fatal error
ORA-00604: Une erreur s'est produite au niveau SQL recursif 1
ORA-04031: impossible d'affecter 4032 octets de memoire partagee ("shared pool","java/lang/StringSYS","joxlod: in ehe","ioc_allocate_pal")
ORA-06512: a "SYS.DBMS_JAVA", ligne 0
ORA-06512: a ligne 2
So, do I need to increase the shared memory ?
Thanks -
Problem when creating Database with Database, OS and hardware Configuraiton
Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAMuser563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work. -
Another odd thing I just this second found is it looks like the phone is setup to wirelessly sync to a designated laptop as soon as it is discovered in the network. Any help or suggestion on how to stop this?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have an iPhone 4S and the latest Apple TV, both setup with my email address as the Apple ID. I subscribed to iTunes Match so our music could be played from iCloud. I gave my wife an iPad 3 and set it up using her email address as the Apple ID. When I try to turn on iMatch so she can play our music from iCloud on her new iPad it tells me that she needs a subscription to iTunes Match. Is it Apple's intent that we would need two iTunes Match subscriptions? If not, how do I accomplish what I want to get done?
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
I ended up letting my itunes match subscription go because I was having a lot of problems with it. I was getting a lot of music where it would play the censored version instead of explicit like I have. After attempting numerous times to fix I gave up and let match expire. I had updated my library by downloading a number of AAC versions from itunes and then manually deleted all of them and added the proper files back by re-ripping my CD's again. I also added a bunch of new music and because I use a rating system, re organized all my music and rated some stuff with new ratings and higher star ratings.
About 3 months passed and I decided to give match another try. After getting it, I found it odd that my database was put there in virtually no time. Not only that, a significant amount of music I deleted (but was in the old match subscription) showed up. I knew it was broken at that point, but today, I was listening to music and items which I know have been updated and changed, have also reverted back to old settings. Is there a way to fix this?
Also, I'm REALLY annoyed with match again. After all my work, I STILL have censored music as my match music. It is really annoying to have different music on my computer than what is in the cloud (not to mention the music which will not upload to the cloud and just constantly says "waiting"!!)Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one. -
HT4137 iCloud setup with one Apple ID and multiple devices
iCloud setup with one Apple ID and multiple devices
What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.
Maybe you are looking for
-
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of
-
After the report files were moved to the directory under root in Linux, I can not open the file(.rdf) in my working directory in linux even though it doesn't work in the report builder in window.(it used to work fine) error message the following; rep
-
I would like to download iMessage for my mac book pro.
I would like to download iMessage for my mac book pro OS X, 10.8.1. When I try to install imessage it says that I need 10.7. What do I have to do to get imessage installed?
-
WLC2106 + LAP1131AG configuration help request
Greetings Everyone. One of my customers asked me to configure a WLC 2106 and 2 LAP 1131AG (lightweight) for corporate/guest Wifi. Basicly they want to implement a good wifi connection for internal use and a guest one with different QoS. The two lans
-
Hi, I am facing a very weird problem. When i try to open a query with user id TEST1, the BEx is showing selection pop-up from some other query. I then do a cancel but immidietly after that the correct selection pop-up comes up. I then give the select