Dreamweaver CC - Problem with SVN

I have just upgrated from Dreamweaver CS6 to Dreamweaver CC only to find that CC has a serious problem with SVN.
When I try to synchronize with SVN I get the following message "Before using this feature, you must enable check-in/check-out. Would you like to enable that feature now?"
Clicking ok takes me to the servers list. There is only one server available wich is marked as Remote.
I edit the server and go to advanced tab but when I click enable check-in another pop-up appears saying:
"If your site is a Subversion site, enabling check in/check out will erase subversion meta data. To work with Subversion you must re-enter your SVN server information and re-synch the entire site"
Something is seriously wrong here....
to work with svn dreamweaver wants to have checkin/ checkout enabled but to enable check-in / checkout I have to disable svn!!!!
Not working with SVN is not an option for us, I will revert to CS6 for now that does not have this problem. This problem makes DW CC completely unusable for people working in group environments. Please have this fixed or post a workaround as we cannot upgrade without this feature.

I've found a workaround for this (I'm using the Trial to push my bosses into buying but it should probably work with the final version too).
1.- Set up your site without check out or svn (save)
2.- Edit your site and add the check out option in servers - make sure you put in a name or it won't let you save later on (don't save)
3.- Set up your SVN info (say yes to disable check in)
4.- Save your site and exit Dreamweaver immediately
5.- Open registry editor and go to "HKEY_CURRENT_USER\Software\Adobe\Common\13.0\Sites"
6.- In the list (-Site1,-Site2,-SiteN...) go to the site you want SVN on
7.- Find the key labeled "SiteServer N\Enable Check In/Check Out" (it should be a value of 0x00000000)
8.- Edit that key (right-click -> Modify...) and change the "0" to "1"
9.- OK out of regedit and close it
10.- Dreamweaver should now be able to connect to SVN without a problem
It looks like it's an error with the Site Manager in DW, since all I'm doing is changing a setting and it works fine.

Similar Messages

Dreamweaver CS3. problem with installation

Greetings...
I have some strange problems with installation of Dreamweaver
CS3: when I'm running setup -- it shows "initialization" window and
then shows message that at one time I can install only one adobe
produc. But there is no unfinished installations...
Also this setup adds it's button to "Add or remove
programs"...
What should I do?
Best regards...

>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
Where did you get this file?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ABK54" <[email protected]> wrote in message
news:fojl9t$e10$[email protected]..
>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
version of Dreamweaver
>CS3)
> and after I have try to run the Setup.exe file.
> After 2 sec open a window - preparetion of Adobe
Dreamweaver CS3 -
> ,transer
> some files and open a window Loading setup... in 2 sec
close this window
> and
> after nothing!!!
>
> I need your help please
> tks
>
>
> sorry for the shuting
>

Dreamweaver CS3 problem with small fonts

Hello,
I am having a problem with text appearing
REALLY SMALL and unreadable in CS3, when it looked fine in
Dw8. It also looks fine in in all browsers.
I talked to Adobe tech support, and they said something about
my CSS file not being correct. I looked at it, and nothing seems
out of the ordinary.
If it was a problem with my CSS file, wouldn't it look bad in
the browser as well?
Any suggestions?
Ron

Ron,
Thanks for the sample file. This is a bit complicated, so
please bear
with me.
Up until DW8, DW rendering always targeted the most popular
browser at
that time. For DW8, that was IE6. Traditionally, the most
popular
browser was the most popular because it was the best browser,
but that
no longer holds true. So, DW CS3 now targets CSS 2.1. Note
that DW does
not support all of the CSS 2.1 spec, but what it does support
follows
the spec.
Your page does not have a DOCTYPE, so it renders in "quirks"
mode in the
browsers that I tested it in on WinXP (FF2, IE7, Opera9). DW
renders
this page in IE6 quirks mode, but DW CS3 no longer supports
quirks mode.
Put a DOCTYPE such as the following in your page to see what
I mean:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
The reason that the font is so small is because of the
font-size
property in this rule:
TD {
FONT-SIZE: 80%;
Your page has tables nested 4 levels deep, so the 80% is
compounded at
each level. I fixed this in DW CS3 by creating a style sheet
with this rule:
TD { FONT-SIZE: 100% !important; }
and the applied it as a Design-time Style Sheet, although you
may be
able to remove the 80% altogether.
Hope this helps,
Randy
> Here's a link to the page:
>
http://www.ualberta.ca/AICT/IMS/
>
> You should be able to download the source for the page,
if you so desire...!
>
> Thanks in advance for any suggestions...

Dreamweaver 8 problem with database panel

Hi,
I am workting with Dreamweaver 8 and WAMP5 1.4.5 (php 5.1
Apache 1.3 MySQL 4.1)
I have created a connexion MySQL in Dreamweaver 8
When I open "database" in the application panel I can see the
4 tables of my database but when I click on each table to see the
fields it doen't show any and indicate there is no field.
THANKS in advance for you HELP

Hi, Thanks for your quick answer.
I just shutdown my database and restart but no errors displayed.
However, the trace file displaying :
Dump file F:\8i\oracle\admin\INTRANET\udump\ORA01704.TRC
Fri Apr 07 09:29:42 2006
ORACLE V8.1.7.3.0 - Production vsnsta=0
vsnsql=f vsnxtr=3
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Oracle8i Enterprise Edition Release 8.1.7.3.0 - Production
With the Partitioning option
JServer Release 8.1.7.3.0 - Production
Windows 2000 Version 5.2 Service Pack 1, CPU type 586
Instance name: intranet
Redo thread mounted by this instance: 1
Oracle process number: 12
Windows thread id: 1704, image: ORACLE.EXE
*** SESSION ID:(11.1) 2006-04-07 09:29:42.859
Error in executing triggers on database startup
*** 2006-04-07 09:29:42.875
ksedmp: internal or fatal error
ORA-00604: Une erreur s'est produite au niveau SQL recursif 1
ORA-04031: impossible d'affecter 4032 octets de memoire partagee ("shared pool","java/lang/StringSYS","joxlod: in ehe","ioc_allocate_pal")
ORA-06512: a "SYS.DBMS_JAVA", ligne 0
ORA-06512: a ligne 2
So, do I need to increase the shared memory ?
Thanks

Macromedia Dreamweaver 8 Problems with Pictures.

I know there is no support for Macromedia products, but I'm having a bit of an issue with Dreamweaver 8 and am hoping someone here may have an idea of a fix...
The program will operate properly, allowing the creation of pages, but without warning, it will stop loading pictures in design view. Rebooting the software will not fix it, but rebooting the machine will. This is, of course, a hassle and I'd love to find a fix for this. Any ideas?
Thanks!!

I'm sorry, but what you posted is NOT valid image HTML. Perhaps in haste you removed the quotes and chevrons...
<img src="some_image.jpg" alt="description" width="value" height="value">
What you describe sounds like a computer memory issue. Have the images all been optimized for the web in your graphics editor? By that I mean, saved as RGB images which have been cropped & scaled down to required height and width, then optimized to the smallest possible file size.
Are you saving your work often with Ctrl+S?
Nancy O.

Dreamweaver cs3 problem with leopard

Dreamweaver CS3 is much slower with Leopard. And I have trouble uploading pics to remote site. Anyone got a solution?

If there is a solution, you'd probably find it on the Adobe forums:
http://www.adobe.com/support/forums

Problems with SVN and sync configuration

Hello,
I'm struggling with two 'features' of DW CS5.
The first is the following behavior of the integrated SVN-client in DW.
On every startup of the program DW sets the SVN-property to ignore the _notes directories (in wich DW stores the sync-information) to all the folders of my sites. I set the global property in my local SVN-client to ignore those anyway, because I don't want the property in the folders of my repositories. Is there any way to say DW to NOT set this property itself? It's really annoying to delete the property every day...
The second is when I have to start a sync to the remote-/testserver DW always marks all the files where just the date is different to mine but the content is the same. When a colleague is updating/sync'ing a whole site, with his IDE (not DW), all the files and folders get a new date and DW wants me to sync all these (10k files and growing...). That gets a little time intensive after a while. Is there a way to say DW to ignore the date of the file like in nearly every other sync-tool?
Thanks for your answer(s),
c

Try this Re: Wi-Fi Sync not working in iOS 5

Dreamweaver CS3 - Problems with Firefox

Hi,
I'm pretty new to css and divs and need help fixing an error
on two pages of the following site:
www.caroleoconnell.com and
www.caroleoconnell.com/OnlineStore.html
The site appears fine in IE7. If one tries to open the same
site in Firefox, the content in the middle section looks scrambled
and overlapping, which obviously indicates that the css rules
create somehow a conflict for Firefox.
The error message in Dreamweaver shows the following:
“Found 1 errors in external css files
Affects: Firefox 2.0; Internet Explorer 6.0, 7.0; Internet
Explorer for Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari
2.0”
The attached shows the css rules.
Please let me know if you can walk me through the correct
setup or if you have any info/knowledge about resolving this issue.
Thanks in advance.
Fred
Phone - 404.513.4902
E-Mail - [email protected]

This could use some attention too -
scrollbar-face-color:#;
scrollbar-track-color:#;
scrollbar-arrow-color:#;
scrollbar-3Dlight-color:#;
scrollbar-base-color:#;
scrollbar-shadow-color:#;
scrollbar-darkshadow-color:#;
scrollbar-highlight-color:#;}
just delete the lot.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"fthomas27" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> I'm pretty new to css and divs and need help fixing an
error on two pages
> of
> the following site:
>
> www.caroleoconnell.com and
www.caroleoconnell.com/OnlineStore.html
>
> The site appears fine in IE7. If one tries to open the
same site in
> Firefox,
> the content in the middle section looks scrambled and
overlapping, which
> obviously indicates that the css rules create somehow a
conflict for
> Firefox.
>
> The error message in Dreamweaver shows the following:
>
> ?Found 1 errors in external css files
> Affects: Firefox 2.0; Internet Explorer 6.0, 7.0;
Internet Explorer for
> Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari 2.0?
>
> The attached shows the css rules.
>
> Please let me know if you can walk me through the
correct setup or if you
> have
> any info/knowledge about resolving this issue.
>
> Thanks in advance.
>
>
> Fred
>
> Phone - 404.513.4902
> E-Mail - [email protected]
>
>
>
> td {
> text-align: left;
> vertical-align: top;
> font-family:Tahoma;
> font-size:11px;
> color:#6C7D88;
> line-height:12px;
> }
> a {
> text-decoration: underline;
> color:#5182B3;
> }
> a.1 {
> text-decoration: none;
> color: 000000;
> }
> .t11 {
> font-family: Tahoma;
> font-size: 11px;
> font-style: normal;
> }
> body { margin:0px;padding:0px;
> scrollbar-face-color:#;
> scrollbar-track-color:#;
> scrollbar-arrow-color:#;
> scrollbar-3Dlight-color:#;
> scrollbar-base-color:#;
> scrollbar-shadow-color:#;
> scrollbar-darkshadow-color:#;
> scrollbar-highlight-color:#;}
> .blue {color:#6C7D88}
> .light_blue {color:#5182B3}
> .orange {color:#F38900}
> .bott {color:#FFFFFF; font-size:9px;
text-decoration:none}
>

Problem with Xfce-svn & thunar

Hi, I've got a problem with Xfce-svn installed via pacman from
Server = http://arch.os-zen.net/pkg/xfce-svn
After logging, Xfce is loading and after while I can see 2 panels and black screen (and without icons on desktop) although I set the wallpaper. It shows up after ca 5 minutes. What's more - when I want to start Thunar I must wait few minutes. I thought it was caused by some error with thunar package, but I've updated thunar few times since it happened first time.
I post this problem on polish forum, but it's unsolved... Can somebody help me?

xaerxess wrote:
Hi, I've got a problem with Xfce-svn installed via pacman from
Server = http://arch.os-zen.net/pkg/xfce-svn
After logging, Xfce is loading and after while I can see 2 panels and black screen (and without icons on desktop) although I set the wallpaper. It shows up after ca 5 minutes. What's more - when I want to start Thunar I must wait few minutes. I thought it was caused by some error with thunar package, but I've updated thunar few times since it happened first time.
I post this problem on polish forum, but it's unsolved... Can somebody help me?
How did you start xfce? Was it using CPU while you're waiting? You could try to start xterm after x (without desktop), then run the following to see if each of them works:
· xfdesktop &
· xfce4-panel &
· xfwm4 --daemon

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Problem with JavaScript snipet that DreamWeaver is writing

I am having a problem with code that DreamWeaver (CS3) is
writing. I'm fairly certain the problem is in a small piece of
JavaScript that DreamWeaver is composing.
This is a fairly complex problem, so bear with me.
First - What I am trying to make happen: When on a page on my
site (the-oilman.com) I want a link that opens a new window in the
on-line store at a different site (AMSOIL.com). I need to leave
both the page on my site open and have this 'store' page open.
First of all this is working fine, using the 'Open Window'
'behavior' in DreamWeaver. If someone wants to change windows (or
tabs) and go back to my page, leaving the 'store' window open also
- the problem is set up to happen. If from back at my site, you
click on the same or a different link that goes back to the 'store'
either on the same page or a different page at AMSOIL.com - the
'store' window goes to the correct page, but the 'store' window
does NOT come on top. When they click on a link to go back to the
'store' I need the 'store' window to come to the top. If they have
previously put something in the cart, and come back and add
something else to the cart in the 'store' by coming in from
different links on my site the 'store' is working correctly because
I leave it open the whole time.
snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
from the head:
<script>

</script>
code from 2 different links that is using this script:
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
target="store" onClick="MM_openBrWindow('#','store','')"
csclick="10D39F40">Buy Now</a>
<a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
title="AMSOIL Store at AMSOIL.com" target="store"
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=store','stor e','')">On
Line Store</a>
I believe what I need is a longer javascript. Instead of just
"window.open" I need an "if" but my javascript knowledge is very,
very limited.
I need it to first check that if the window named 'store' is
open then 'focus' it, or if it is not open to open the window named
'store'.
Will this fix my problem? If so, please help me write the
lines of code to do it.
If this isn't the solution, what is the problem and the
solution?
A separate question but related: if you look in the two
different links codes, in the function call one of them uses a
'null' page reference and the other repeats the full link reference
from the href= . Both seem to work, but which is the correct or the
preferred syntax. My guess is there are some browsers that this
will give a problem, but which way is preferred.
Don Dawson
mailto:[email protected]

Create a new page. Try to apply this same behavior to a link
on that new
page. Look at the code. Can you reproduce the problem there?
The code you
show below has oodles of GL stuff in it. Do you need that GL
markup?
What operational sequence did you go through to get this
behavior call?
onClick="MM_openBrWindow('#','store','')"
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pad graphics" <[email protected]> wrote in
message
news:[email protected]...
>I am having a problem with code that DreamWeaver (CS3) is
writing. I'm
>fairly
> certain the problem is in a small piece of JavaScript
that DreamWeaver is
> composing.
>
> This is a fairly complex problem, so bear with me.
>
> First - What I am trying to make happen: When on a page
on my site
> (the-oilman.com) I want a link that opens a new window
in the on-line
> store at
> a different site (AMSOIL.com). I need to leave both the
page on my site
> open
> and have this 'store' page open. First of all this is
working fine, using
> the
> 'Open Window' 'behavior' in DreamWeaver. If someone
wants to change
> windows (or
> tabs) and go back to my page, leaving the 'store' window
open also - the
> problem is set up to happen. If from back at my site,
you click on the
> same or
> a different link that goes back to the 'store' either on
the same page or
> a
> different page at AMSOIL.com - the 'store' window goes
to the correct
> page, but
> the 'store' window does NOT come on top. When they click
on a link to go
> back
> to the 'store' I need the 'store' window to come to the
top. If they have
> previously put something in the cart, and come back and
add something else
> to
> the cart in the 'store' by coming in from different
links on my site the
> 'store' is working correctly because I leave it open the
whole time.
>
> snipets of code that DreamWeaver is writing for my site
(the-oilman.com):
> from the head:
> <script>
> 
> </script>
>
> code from 2 different links that is using this script:
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=storefront/sso"
> target="store" onClick="MM_openBrWindow('#','store','')"
> csclick="10D39F40">Buy
> Now</a>
> <a href="
http://www.amsoil.com/redirect.cgi?zo=52257&page=store"
> title="AMSOIL
> Store at AMSOIL.com" target="store"
>
onClick="MM_openBrWindow('http:www.amsoil.com/redirect.cgi?zo=52257&page=sto
> re','store','')">On Line Store</a>
>
> I believe what I need is a longer javascript. Instead of
just
> "window.open" I
> need an "if" but my javascript knowledge is very, very
limited.
> I need it to first check that if the window named
'store' is open then
> 'focus'
> it, or if it is not open to open the window named
'store'.
> Will this fix my problem? If so, please help me write
the lines of code to
> do
> it.
> If this isn't the solution, what is the problem and the
solution?
>
> A separate question but related: if you look in the two
different links
> codes,
> in the function call one of them uses a 'null' page
reference and the
> other
> repeats the full link reference from the href= . Both
seem to work, but
> which
> is the correct or the preferred syntax. My guess is
there are some
> browsers
> that this will give a problem, but which way is
preferred.
>
> Don Dawson
> mailto:[email protected]
>

Problem with database in dreamweaver 8

Hi,
I am workting with Dreamweaver 8 and WAMP5 1.4.5 (php 5.1
Apache 1.3 MySQL 4.1)
I have created a connexion MySQL in Dreamweaver 8
When I open "database" in the application panel I can see the
4 tables of my database but when I click on each table to see the
fields it doen't show any and indicate there is no field.
THANKS in advance for you HELP

Let's start at the top. What is your Operating System? What
do you see
when you point your browser at ''
http://localhost''?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Springbok_yfc" <[email protected]> wrote in
message
news:ectqni$3cg$[email protected]..
> Hi there
>
> No too long ago I purchased Dreamweaver 8 and I am
currently designing a
> website for an organisation but I am having diffculties
setting up the
> Access
> Database..I have no problem with connecting Dreamweaver
8 to the database.
> So
> in order to get a solution to my difficulties I have
been doing alot of
> tutorials that I got from online, but for some reason
after I have done
> everything the tutorials asked of me and its time to
preview the live
> data..a
> pop up message appears saying the Page cannot be
displayed. Is this a
> glitch
> within Dreamweaver 8 itself? And if so will the updates
be able to fix
> this
> problems? What I would really like to do is store news
etc...in a database
> and
> then have the database shown on the website as a news
archive. Can anyone
> please help me with this?
>
> Kind Regards
> Heinrich
>

Problem with opening html page in Dreamweaver

Hello,
I would like to ask the forum because I have a problem with Dreamweaver 8.
In the past when I work with my PC on Windows XP I didn't have this problem.
Now I have a new PC with Windows 7 Familial Edition Premium.
I can open he most pages I would like, .htm particuliarly but some of them like .html don't opened in Dreamweaver 8
on PC with Windows 7.
Example:
With this page: http://www.pb-veille-consulting.com/veille.html
I can open it with Dreamweaver 8 under Windows XP on my portable PC.
But I can't open it with Dreamweaver 8 under Windows 7 on my fix PC.
Where is the problem?
You could watch the code of this page and perharps give me answers from my question.
Thanks a lot.
Patrick.

It could be that Extensions.txt and MMDocumentTypes.xml do not have the full set file extensions.
The first one can be located at ~username/AppData/Roaming/Adobe/Dreamweaver CS6/en_us/Configuration and needs to have HTML added to line 1
The second one can be located at ~username/AppData/Roaming/Adobe/Dreamweaver CS6/en_us/Configuration/DocumentTypes and needs to have HTML added to line 3 so that it looks like
<documenttype id="HTML" internaltype="HTML" winfileextension="html,htm,shtml,shtm,stm,tpl,lasso,xhtml" macfileextension="html,htm,shtml,shtm,tpl,lasso,xhtml,ssi" file="Default.html" writebyteordermark="false" mimetype="text/html">

Problems installing SVN or MySQL with Fink or apt-get

I'm having problems with running SVN on my intel desktop. I primarily use Fink to install packages, and SVN installed just fine, but when I run it, I get
svn: SSL is not supported
I'm pretty sure SSL is not needed, but if I try to install the ssl package for SVN, I get:
fink needs help picking an alternative to satisfy a virtual dependency. The
candidates:
(1) db44-aes-shlibs: Shared Libraries for db44-aes
(2) db44-shlibs: Shared Libraries for db44
Pick one: [1]
The following package will be installed or updated:
svn-client-ssl
The following 29 additional packages will be installed:
apr-ssl apr-ssl-common apr-ssl-shlibs autoconf2.5 automake1.9
cyrus-sasl2-dev cyrus-sasl2-shlibs db43-ssl db43-ssl-shlibs db44-aes-shlibs
expat gdbm3 io-string-pm libtool14 libtool14-shlibs libxml2 m4 neon24-ssl
neon24-ssl-shlibs openldap23-dev openldap23-shlibs openssl097 openssl097-dev
openssl097-shlibs pkgconfig svn-ssl-shlibs swig swig-shlibs texinfo
Do you want to continue? [Y/n]
/sw/bin/dpkg-lockwait -i /sw/var/cache/apt/archives/db43-ssl4.3.29-1001darwin-i386.deb /sw/var/cache/apt/archives/db43-ssl-shlibs4.3.29-1001darwin-i386.deb
dpkg: parse error, in file `/sw/var/lib/dpkg/status' near line 577 package `db43-ssl':
missing version
### execution of /sw/bin/dpkg-lockwait failed, exit code 2
Failed: can't batch-install packages: /sw/var/cache/apt/archives/db43-ssl4.3.29-1001darwin-i386.deb /sw/var/cache/apt/archives/db43-ssl-shlibs4.3.29-1001darwin-i386.deb
If I try to reinstall with apt-get, I get:
Reading Package Lists... Done
Building Dependency Tree... Done
Sorry, svn is already the newest version.
0 packages upgraded, 0 newly installed, 0 to remove and 14 not upgraded.
W: Encountered status field in a non-version description
W: You may want to run apt-get update to correct these problems
and if I run apt-get update, I get:
Hit http://bindist.finkmirrors.net 10.4/release/main Packages
Hit http://bindist.finkmirrors.net 10.4/release/main Release
Hit http://bindist.finkmirrors.net 10.4/release/crypto Packages
Hit http://bindist.finkmirrors.net 10.4/release/crypto Release
Hit http://bindist.finkmirrors.net 10.4/current/main Packages
Hit http://bindist.finkmirrors.net 10.4/current/main Release
Hit http://bindist.finkmirrors.net 10.4/current/crypto Packages
Hit http://bindist.finkmirrors.net 10.4/current/crypto Release
Reading Package Lists... Done
Building Dependency Tree... Done
W: Encountered status field in a non-version description
W: You may want to run apt-get update to correct these problems
...which is somewhat circular, eh?
I have SVN and MySQL running on my intel laptop just fine, same version of Tiger. Anyone have any ideas?

From the Q6.14: I can't install anything because I get "dpkg: parse error, in file `/sw/var/lib/dpkg/status'"
A: This means that somehow your dpkg database got corrupted, usually from a crash or some other unrecoverable error. You can fix it by copying the previous version of the database, like so:
sudo cp /sw/var/lib/dpkg/status-old /sw/var/lib/dpkg/status
You may need to re-install the last couple of packages you installed before the problem started occurring.
- cfr

Problems with Italian version of Dreamweaver [subject edited by moderator]

The italian version of this software doesn't match with the configurations in the tutorials and it's impossible to follow the procedure to learn how to use it!! I've spent more than two hours just to put the "split working area" in vertical with no results. No way to open the same tools. And then, where are the assets files to download??? I think it could be a wonderful idea give us something easier to learn, simply having giving us the right correspondence between the software (open for the first time after the download) and the video tutorials…please, in this condition I cannot work and so how can I do?
Ciao
Paolo

Dear Murray,
unfortunately I can't go on with this program…it's impossible without the CSS file showed on the tutorial…I've also tried to find something on the web and I've tried to install Adobe Widget Browser but it doesn't work!
So I've lost a lot of hours and I'm very frustrated and disappointed…and then the Dreamweaver CC version I've downloaded from Creative Cloud is different from the one in the tutorials, so I can follow all the indications without stop and start searching somewhere the things…
In this condition it's impossible to learn how to use this software…it's an incredible waste of time…and paying for that!!
Il giorno 01/mar/2015, alle ore 20:17, paolo <[email protected]> ha scritto:
I'm using just CC…
Il giorno 01/mar/2015, alle ore 16:46, MurraySummers <[email protected]> ha scritto:
>>
>> Problems with Italian version of Dreamweaver
>> created by MurraySummers in Dreamweaver support forum - View the full discussion
>> Different language versions of the same version of DW are the same. What I mean by that is that no matter which REGIONALIZED version you are using, the interface should be the same. So even though you say you are using DW CC, is it CC2014, or CC2014.1, or just CC that you are using? (you can tell by looking under HELP > About Dreamweaver)
>>
>>
>> On this page - How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials - there is a link to download the sample files right under the "Browse Dreamweaver CC Tutorials".
>>
>> If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240860#7240860 and clicking ‘Correct’ below the answer
>> Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
>> Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240860#7240860
>> To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
>> Start a new discussion in Dreamweaver support forum by email or at Adobe Community
>> For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
>

Dreamweaver CC - Problem with SVN

Similar Messages

Maybe you are looking for