Dreamweaver CS3 and Coldfusion Errors

is anyone experiencing errors when using the coldfusion
inbuilt tools within dreamweaver cs3? I am getting errors when
using the insert record server beahaviour. Also i have noticed that
some sql code is not genrated correctly within cs3. This was not as
a problem in versions MX and 8.

Have you posted this question in the Cold Fusion Forums?
http://forums.adobe.com/community/coldfusion
I don't use CF myself and the few CF coders I know have long since moved to Eclipse/ColdFusion Builder. 
Nancy O.

Similar Messages

  • Dreamweaver CS3 reforderss ColdFusion templates

    Dreamweaver CS3 reorders ColdFusion template code without
    being asked
    When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
    will reorder some ColdFusion tags.
    For example:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "..Some Code..."
    4. </cfcase>
    5. <cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfdefaultcase>
    8. </cfswitch>
    9. <CFQUERY username="#request.dbuser#"
    password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
    10. Blah blah
    11 .</cfquery>
    Saved as a Dreamweaver 8 page and then subsequently opened in
    Dreamweaver CS3, the code becomes jumbled as:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "...Some_Code.."
    4.
    5. </cfcase><cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfswitch>
    8. </cfdefaultcase><CFQUERY
    username="#request.dbuser#" password="#request.dbpass#"
    DATASOURCE="#attributes.DSN#">
    9. ..blah..blah..
    10. </CFQUERY>
    (Note the juxtaposition of the </cfdefaultcase> and
    </cfswitch> tags on lines 7 & 8)
    The Command "Clean up XHTML" has no effect.
    This behavior occurs on every Mac running DWCS3 in our
    office, but doesn't occur on Macs running DW8.
    If the CF page is opened in a Text Editor and saved as a Text
    doc and then opened in DWCS3 as a Text doc, the code stays intact
    and is not scrambled.
    However, as soon as the page is saved with the ".cfm"
    extension, DWCS3 scrambles the </cfdefaultcase> and
    </cfswitch> tags.
    Adobe Dreamweaver Support has duplicated the error but has no
    fix as of yet, so Dreamweaver CS3 is completely useless to me as a
    CF editor.
    Does anyone have any ideas?

    Dreamweaver CS3 reorders ColdFusion template code without
    being asked
    When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
    will reorder some ColdFusion tags.
    For example:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "..Some Code..."
    4. </cfcase>
    5. <cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfdefaultcase>
    8. </cfswitch>
    9. <CFQUERY username="#request.dbuser#"
    password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
    10. Blah blah
    11 .</cfquery>
    Saved as a Dreamweaver 8 page and then subsequently opened in
    Dreamweaver CS3, the code becomes jumbled as:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "...Some_Code.."
    4.
    5. </cfcase><cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfswitch>
    8. </cfdefaultcase><CFQUERY
    username="#request.dbuser#" password="#request.dbpass#"
    DATASOURCE="#attributes.DSN#">
    9. ..blah..blah..
    10. </CFQUERY>
    (Note the juxtaposition of the </cfdefaultcase> and
    </cfswitch> tags on lines 7 & 8)
    The Command "Clean up XHTML" has no effect.
    This behavior occurs on every Mac running DWCS3 in our
    office, but doesn't occur on Macs running DW8.
    If the CF page is opened in a Text Editor and saved as a Text
    doc and then opened in DWCS3 as a Text doc, the code stays intact
    and is not scrambled.
    However, as soon as the page is saved with the ".cfm"
    extension, DWCS3 scrambles the </cfdefaultcase> and
    </cfswitch> tags.
    Adobe Dreamweaver Support has duplicated the error but has no
    fix as of yet, so Dreamweaver CS3 is completely useless to me as a
    CF editor.
    Does anyone have any ideas?

  • Dreamweaver CS3 reformats ColdFusion templates

    Dreamweaver CS3 reorders ColdFusion template code without
    being asked
    When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
    will reorder some ColdFusion tags.
    For example:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "..Some Code..."
    4. </cfcase>
    5. <cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfdefaultcase>
    8. </cfswitch>
    9. <CFQUERY username="#request.dbuser#"
    password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
    10. Blah blah
    11 .</cfquery>
    Saved as a Dreamweaver 8 page and then subsequently opened in
    Dreamweaver CS3 becomes jumbled as:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "...Some_Code.."
    4.
    5. </cfcase><cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfswitch>
    8. </cfdefaultcase><CFQUERY
    username="#request.dbuser#" password="#request.dbpass#"
    DATASOURCE="#attributes.DSN#">
    9. ..blah..blah..
    10. </CFQUERY>
    (Note the juxtaposition of the </cfdefaultcase> and
    </cfswitch> tags on lines 7 & 8)
    The Command "Clean up XHTML" has no effect.
    This behavior occurs on every Mac running DWCS3 in our
    office, but doesn't occur on Macs running DW8.
    If the CF page is opened in a Text Editor and saved as a Text
    doc and then opened in DWCS3 as a Text doc, the code stays intact
    and is not scrambled.
    However, as soon as the page is saved with the ".cfm"
    extension, DWCS3 scrambles the </cfdefaultcase> and
    </cfswitch> tags.
    Adobe Dreamweaver Support has duplicated the error but has no
    fix as of yet, so Dreamweaver CS3 is completely useless to me as a
    CF editor.
    Does anyone have any ideas?

    Dreamweaver CS3 reorders ColdFusion template code without
    being asked
    When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
    will reorder some ColdFusion tags.
    For example:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "..Some Code..."
    4. </cfcase>
    5. <cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfdefaultcase>
    8. </cfswitch>
    9. <CFQUERY username="#request.dbuser#"
    password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
    10. Blah blah
    11 .</cfquery>
    Saved as a Dreamweaver 8 page and then subsequently opened in
    Dreamweaver CS3 becomes jumbled as:
    1. <cfswitch expression="#response.errorcode#">
    2. <cfcase value = "10602">
    3. "...Some_Code.."
    4.
    5. </cfcase><cfdefaultcase>
    6. "...Some_Other_Code.."
    7. </cfswitch>
    8. </cfdefaultcase><CFQUERY
    username="#request.dbuser#" password="#request.dbpass#"
    DATASOURCE="#attributes.DSN#">
    9. ..blah..blah..
    10. </CFQUERY>
    (Note the juxtaposition of the </cfdefaultcase> and
    </cfswitch> tags on lines 7 & 8)
    The Command "Clean up XHTML" has no effect.
    This behavior occurs on every Mac running DWCS3 in our
    office, but doesn't occur on Macs running DW8.
    If the CF page is opened in a Text Editor and saved as a Text
    doc and then opened in DWCS3 as a Text doc, the code stays intact
    and is not scrambled.
    However, as soon as the page is saved with the ".cfm"
    extension, DWCS3 scrambles the </cfdefaultcase> and
    </cfswitch> tags.
    Adobe Dreamweaver Support has duplicated the error but has no
    fix as of yet, so Dreamweaver CS3 is completely useless to me as a
    CF editor.
    Does anyone have any ideas?

  • Dreamweaver CS3 and Mac OS 10.4.11 Incompatability

    I have been using Dreamweaver CS3 under OS 10.4.10 for a few
    months without significant issues... but after upgrading to 10.4.11
    there is a significant problem.
    I am unable to access any of my remote servers to upload
    files to the sites I have built.
    I was able to reinstall Dreamweaver 8 and it works fine with
    all the same setups
    I've read a technote on a noted problem with Dreamweaver CS3
    and Mac OS 10.5 - but it also appears to happen on 10.4.11
    You can read the 10.5 technote here:
    http://www.adobe.com/go/kb402780

    I have not experienced this problem. Try removing the DW CS3
    preferences file in your Library and then let DW build a new one.
    BTW, what error you are getting when you try to FTP?

  • SWF problem in Dreamweaver CS3 and strange Script file

    Hi folks, I am using Dreamweaver CS3 and tried to upload a
    SWF file today. The SWF includes three buttons, one for video,
    another for audio and one for text. Before loading up to DW all
    three parts played fine. But when I uploaded to DW and my site, the
    video fails to play. A Script file, and another file downloaded I
    am not sure what I am supposed to do with this script file. The
    script file is called The audio and text part works fine, but the
    video will not play. I am not sure why this is, but when I uploaded
    the file to Dreamweaver there was a Script file called
    AC_RunActiveContent.js that automatically downloaded along with a
    file called .htaccess
    The other file is called called .htaccess
    I uploaded both files to my server, but that did not help the
    video play. I tried pasting the AC_RunActiveContent.js code into my
    page and uploading, but that did not help the video play either; I
    just got code at the bottom of my page.
    I have viewed the page in Mozilla, IE7 and Flock, but still I
    cannot play the video.
    Does anyone have any idea how to make the video play in
    Dreamweaver; what I am supposed to do with these two code files?
    For those interested in the AC_RunActiveContent.js code, I
    will post below. Please try to explain simply because I am not so
    tech savvy.
    I thank you all.
    Mary

    I have managed to fathom it out.

  • Dependent Drop-Down Menu in Dreamweaver CS3 and ADDT

    Hi All,
    I have been trying to create a dependent drop--down menu so that when I select an item the corresponding information would populate the other field or fields. So far I have tried to use the tutorial posted on the link below by Waleed Barakat but I have had no sucess.
    http://www.tutorials-expert.com/tutorial/20354/-How-To-Create-Dependent-Dropdown -ListMenu-Forms.html
    I wanted to know if anyone has something else that I can review to help me in this process.
    Thanks

    Please refer to this article (http://forums.adobe.com/message/1069624#1069624) for information on how your tables should be set up.
    Date: Wed, 10 Jun 2009 00:49:28 -0600
    From: [email protected]
    To: [email protected]
    Subject: Re: Dependent Drop-Down Menu in Dreamweaver CS3 and ADDT
    Hi Georgev63,
    I followed the instructions to the link you sent me and it did not produce the results I had hope for.
    The directions are pretty straight forward and I attempted the steps several times with the same results.
    Basically the field that supposed to be the detail field is blank rather than having the ID of the master field.
    Any further suggestions would be much appreciated.
    Thanks
    E.
    >

  • Dreamweaver CS3 and using keyboard shortcut to preview in browser

    Hello,
    I am currently using Dreamweaver CS3 and the shortcut to preview work in the browser is Command - F12. The problem is, I'm using the Apple keyboard and when I click that, the volume of the system changes.
    I've tried Control, Command, Command+Control, etc, and F12 and nothing works. Any suggestions? Thanks.

    fnOptionF12 will work.
    fn tells the keyboard to send the F-xx instead of the special function.
    And like I said there is an option in the System Preference to reverse the use of fn and make the F-xx keys work as F-xx instead of the special function.

  • Vista-64 CS 3, all install but Dreamweaver cs3 and Encore

    Hi My OS is Vista-64,
    I'm trying to install the Creative suite 3 master collection.
    All installs fine, except Dreamweaver cs3 and adobe Encore cs3. I get the same reason
    "Component install failed"
    Any ideas what i should do?

    Temprorarily disable UAC (Universal Account Countrol). Also, temprorarily diable your Anti-Virus app. This may then solve your install issues on Win Vista 64. It worked for me...
    Ian

  • Mac Dreamweaver CS3 (and only DW) will not install - Web Premium Suite

    [Previously posted here - suggested to post here instead]
    cannot install Dreamweaver CS3. The error is shown here:
    http://flickr.com/photos/ianlloyd/1140427313/
    Note: I previously took part in the DW9 (aka CS3?) beta
    program but consistently had problems trying to install, so I
    probably have some cruft left over.
    Note also: I have used Spotlight to find anything with
    Dreamweaver in the title that does not relate to DreamWeaver 8
    (which is the version that I currently have running on my Mac with
    no problems).
    Please advise:
    # What file on my system is leading CS3 installer to believe
    I have CS3 installed so that I can zap it
    # Any other clean-up operation I can try to resolve this.
    Many thanks

    Hi, Ian-
    Definitely try using the CS3 Cleanup Script to remove
    conflicting libraries/files/extensions/etc before another clean
    install from the DVD. You can download the right version for your
    platform (Mac?) here:
    CS3
    Cleanup Scripts
    Don't forget to restart after running the scripts- often
    components can remain referenced in memory after removal. Hope this
    helps out!
    best- Scott

  • Dreamweaver CS3 and Windows 8 Issues

    I have Dreamwever CS3 and Windows 8 and I keep getting errors that can only be resolved by closing down DW and losing the work I have processed so far. I happens mostly when I use extentions such as Webassaist Data Bridge. I have visited their forum but they advised me to checkout you trouble shooting service.
    Please advise
    tonytanner257

    Hi,
    If Dreamweaver is working fine without the extensions, I am not sure if we should be troubleshooting Dreamweaver. Just to be sure, Windows 8 is not a supported version for Dreamweaver CS3. It could possibly work, but wouldn't have been tested on Windows 8 as Adobe supports only the previous two versions of any software.
    This is my best answer. You could wait for other experts for their opinion.
    Thanks,
    Preran

  • Dreamweaver CS3 and Sourcegear Vault?

    Has anyone found a way to get Sourcegear Vault (SGV) to work
    with Dreamweaver CS3? I don't have problems with using Dreamweaver
    8 with SGV, but after upgrading all of our stuff to CS3 I'd rather
    use the new version. Any thoughts? The SGV DLL used to go in The
    "\program files\common\dreamweaver\source control\" folder, but I
    can't find an equivalent folder in Dreamweaver CS3. Can anyone
    point me in the right direction?

    fnOptionF12 will work.
    fn tells the keyboard to send the F-xx instead of the special function.
    And like I said there is an option in the System Preference to reverse the use of fn and make the F-xx keys work as F-xx instead of the special function.

  • Dreamweaver CS3 and sql injection....

    Any news if Dreamweaver CS3 will have the same "problems"
    brought on by the
    8.0.2 update to Dreamweaver 8?
    Thanks!

    Excellent...glad to hear it and I look forward to getting
    CS3. I held off
    on 8 because of the so called problems.
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    > Yes, that's what I do. Honestly, I've not seen any
    problems there.
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    > ==================
    >
    >
    > "Pizza Good" <[email protected]> wrote in
    message
    > news:[email protected]...
    >>I think it comes up more when you have a form and
    pass the values to a
    >>recordset which uses those values to query and filter
    a recordset.
    >>
    >>
    >> "Murray *ACE*"
    <[email protected]> wrote in message
    >> news:[email protected]...
    >>>I am processing form input, which I believe is
    where SQL injection comes
    >>>in.
    >>>
    >>> --
    >>> Murray --- ICQ 71997575
    >>> Adobe Community Expert
    >>> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >>> ==================
    >>>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >>> ==================
    >>>
    >>>
    >>> "Pizza Good" <[email protected]> wrote
    in message
    >>> news:[email protected]...
    >>>> That's good, or perhaps you are not building
    the types of sites that
    >>>> may encounter the so called problems?
    >>>>
    >>>>
    >>>> "Murray *ACE*"
    <[email protected]> wrote in message
    >>>> news:[email protected]...
    >>>>>I have to say that I've used 8.0.2 with
    such things quite a bit and not
    >>>>>encountered *any* of the posted problems.
    >>>>>
    >>>>> --
    >>>>> Murray --- ICQ 71997575
    >>>>> Adobe Community Expert
    >>>>> (If you *MUST* email me, don't LAUGH
    when you do so!)
    >>>>> ==================
    >>>>>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>>>>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>>>>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>>>>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >>>>> ==================
    >>>>>
    >>>>>
    >>>>> "Paul Whitham AdobeCommunityExpert"
    <[email protected]> wrote in
    >>>>> message
    news:[email protected]...
    >>>>>> Using stored procedures is a good
    safe guard against SQL injection
    >>>>>> because you have to define your
    parameter types, in much the same way
    >>>>>> that the parameters in the 8.0.2
    worked.
    >>>>>>
    >>>>>> Yes it did break a number of
    extensions because the underlying code
    >>>>>> was completely rewritten but it is
    my understanding that most of
    >>>>>> these were subsequently patched to
    work with it.
    >>>>>>
    >>>>>> --
    >>>>>> Paul Whitham
    >>>>>> Certified Dreamweaver MX2004
    Professional
    >>>>>> Adobe Community Expert - Dreamweaver
    >>>>>>
    >>>>>> Valleybiz Internet Design
    >>>>>> www.valleybiz.net
    >>>>>>
    >>>>>> "Pizza Good"
    <[email protected]> wrote in message
    >>>>>>
    news:[email protected]...
    >>>>>>>I think what he is referring to
    is the sql injection "prevention"
    >>>>>>>code that was introduced in the
    8.0.2 update. I read a bunch of
    >>>>>>>issues related to the way
    recordsets were coded and that a page that
    >>>>>>>was coded lets say in ASP using
    8.0.1 that had used QueryString
    >>>>>>>values that were passed into the
    recodset for filtering/searching no
    >>>>>>>longer worked. I also read that
    8.0.2 "broke" a lot of extensions
    >>>>>>>because of the fix.
    >>>>>>>
    >>>>>>> I am still using MX2004, but I'm
    curious if the supposed problems
    >>>>>>> that came up with 8.0.2 could be
    totally avoided if a programmer
    >>>>>>> used Stored Procedures?
    >>>>>>>
    >>>>>>> Hopefully that makes sense.
    >>>>>>>
    >>>>>>>
    >>>>>>> "Paul Whitham
    AdobeCommunityExpert" <[email protected]> wrote in
    >>>>>>> message
    news:[email protected]...
    >>>>>>>> Most of the change that was
    made to the recordset in 8.0.2 was to
    >>>>>>>> eliminate SQL injections.
    What specifically are you refering to as
    >>>>>>>> an issue now
    >>>>>>>>
    >>>>>>>> --
    >>>>>>>> Paul Whitham
    >>>>>>>> Certified Dreamweaver MX2004
    Professional
    >>>>>>>> Adobe Community Expert -
    Dreamweaver
    >>>>>>>>
    >>>>>>>> Valleybiz Internet Design
    >>>>>>>> www.valleybiz.net
    >>>>>>>>
    >>>>>>>> "Brendon"
    <[email protected]> wrote in message
    >>>>>>>>
    news:[email protected]...
    >>>>>>>>> Those that are beta
    testing it would know - if they were doing
    >>>>>>>>> serverside/sql related.
    It wouldn't be speculation at all - in
    >>>>>>>>> fact it would be pretty
    straight forward to test.
    >>>>>>>>> I'd be very surprised if
    they havn't fixed the issue - in fact I
    >>>>>>>>> thought it was fixed in
    the 8.0.2 update, but I could be wrong.
    >>>>>>>>>
    >>>>>>>>> Brendon
    >>>>>>>>>
    >>>>>>>>> "Deaf Web Designer"
    <[email protected]> wrote in
    >>>>>>>>> message
    news:[email protected]...
    >>>>>>>>>> DW CS3 is not here
    as yet.
    >>>>>>>>>>
    >>>>>>>>>> Only time will tell
    once you have DW CS3 installed on your
    >>>>>>>>>> platform and find
    >>>>>>>>>> out if that is the
    case.
    >>>>>>>>>>
    >>>>>>>>>> At this point, it is
    all speculation without knowing the fact of
    >>>>>>>>>> the problem.
    >>>>>>>>>> Try to be a bit more
    patient until official release of product
    >>>>>>>>>> sometime this
    >>>>>>>>>> spring.
    >>>>>>>>>>
    >>>>>>>>>
    >>>>>>>>>
    >>>>>>>>
    >>>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>
    >>>>>>
    >>>>>
    >>>>>
    >>>>
    >>>>
    >>>
    >>>
    >>
    >>
    >
    >

  • Dreamweaver CS3 and Athlon 64

    I just installed Creative Suite 3 Web Premium on my computer.
    When I run Dreamweaver CS3, PerfMon shows the processor spiking to
    between 80-100% every few seconds. Avg. pages/sec and disk queue
    length don't seem to be affected. This happen when I'm actively
    working on page(s). If Dreamweaver is idle, the processor does not
    spike.
    My computer is running:
    Windows XP Pro - 32 bit
    AMD Athlon 64 3400+
    2 GB of RAM
    55 GB hard drive, 20 GB free
    Dreamweaver is using around 76 MB of ram, and this remains
    constant as the CPU spikes.
    Are there any known issues with running Dreamweaver CS3 on
    Athlon 64, or has anyone else experienced this problem?

    Spikes in cpu usage by itself is not a problem. DW does some
    processing
    (such as updating remote file lock status) during "idle" time
    to give
    user more cpu to complete tasks.
    Are you seeing lags trying to complete a task? That would be
    a problem.
    If so, please provide more details.
    Thanks,
    Randy
    > I just installed Creative Suite 3 Web Premium on my
    computer. When I run
    > Dreamweaver CS3, PerfMon shows the processor spiking to
    between 80-100% every
    > few seconds. Avg. pages/sec and disk queue length don't
    seem to be affected.
    > This happen when I'm actively working on page(s). If
    Dreamweaver is idle, the
    > processor does not spike.
    >
    > My computer is running:
    > Windows XP Pro - 32 bit
    > AMD Athlon 64 3400+
    > 2 GB of RAM
    > 55 GB hard drive, 20 GB free
    >
    > Dreamweaver is using around 76 MB of ram, and this
    remains constant as the CPU
    > spikes.
    >
    > Are there any known issues with running Dreamweaver CS3
    on Athlon 64, or has
    > anyone else experienced this problem?

  • Dreamweaver CS3 - PHP Include error

    Just upgraded to DW CS3 and found that any page containing a
    PHP include no longer shows up correctly in design view. Only the
    contents of the included file are shown, not the entire page.
    We currently have to comment out ALL PHP included files to
    edit the page, and then uncomment them again before posting to the
    server.
    Is there any work around or setting that can change the way
    the PHP include files are handled??

    Hi David,
    Thank you for following up. I'm really confused why PHP
    includes which have worked in all previous versions of DW, parses
    correctly on the server, and renders correctly in all browsers
    suddenly won't show up in my design view in Dreamweaver after the
    CS3 upgrade.
    One of our PHP includes: <? include 'header.php'; ?>
    The pages render correctly in the browser, but when I open
    them in DW CS3, only the contents of the header are visible -- no
    other page elements. We have to comment out the includes to see the
    page contents.
    In DW8, the contents of the include were hidden and the page
    contents visible.
    In CS3, the contents of the include are visible and the page
    contents hidden.
    The PHP include syntax hasn't changed -- the way Dreamweaver
    shows the code has. Is there a preference or setting that can
    change the view to hide includes?

  • Dreamweaver CS3 Trial install error

    My DreamWeaver CS3 Trial install crashes right after the
    component load. screen. and I do have the new Adobe Reader. I also
    have Photoshop. so what might be the problem. I will try to make a
    video of it and upload it on youtube.
    But anyways my system specs are
    RAM = 512MB ;
    Processor = AMD Athlon 2600 , MMX , 3DNOW , ~2.1GHz ;
    Op system = Win XP Pro(using IIS)
    so what should be wrong with this?

    Steve Hemmings wrote:
    > got a mac os x...
    >
    > downloaded trial version when i go to run the 'setup'
    icon for dreamweaver,
    > the icon expands like its about to load the installation
    but nothing happens.
    Sounds as though you're trying to install Dreamweaver CS3 on
    Mac OS X
    10.3 or earlier. CS3 requires OS X 10.4 as a minimum. It
    won't install
    on earlier versions.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

Maybe you are looking for

  • LoadVars-using send to pass a variable from flash to php

    For the life of me, I've tried everything: I've researched LoadVars on Adobe forum, used David Powers' books, googled 'flash to php', LoadVars, etc. and tried sendAndLoad, send, and using $_POST, $_GET, $_REQUEST. $HTTP_POSTVARS but I keep getting th

  • How do I back up my iPod to an external drive?

    I need to back up my iPod and then recover all the info once I restore it.  Having problems and don't want to lose any of my books/songs/movies.  I have an external tetra drive that I am using for the back up.

  • Bought a new phone, I had 1000 photos in photostream but only 50 hit my new phone

    I upgraded to iphone5 yesterday, there were 1000 photos in photostream with regular back ups to icloud.  But I was only able to transfer 50 photos to my new phone?  When I log into icloud I don't see photos, I thought they were backed up to icloud, r

  • Why are my foxtabs too blurry to read?

    my foxtabs are too blurry to read. i know which ones are which because i chose them but my wife can't use them because they are not clear enough to see the print.

  • Re: trying to create custom video transistions....

    Im trying to create custom transistions to a video project im working on .. I want to use a custom image that i created and am having problems making it work like a video transition that is installed with FC .. Im not sure if i have to use XML files