Dreamweaver CS3 and Mac OSX Leopard 10.5

I did an Erase and Install of Mac OSX Leopard 10.5... so it's
a clean install.
I installed the Adobe Web Premium software (full, not
upgrade).
Dreamweaver has been CRASH city. Try to merge some tables...
crash. Try to copy past a graphic from one page to another...
crash. Try to connect to a MySQL database.... crash. Trying to work
on a website I must have had 10 crashes in the last hour.
Is there an upgrade needed to CS3 to work correctly on
Leopard?

David thanks so very much!!!
After hours of looking for a solution i went into the
following folders
Mac HD/Users/[user]/Library/Application
Support/Adobe/Dreamweaver 9/Configuration
Mac HD/Users/[user]/Library/Application
Support/Adobe/Dreamweaver 9/configuration-1
removed the files as you said above
MacFileCache[random_numbers].dat
and hey presto, restarted Dreamweaver and it loaded, but for
one time only, then the problem started again where it would tell
me there is an ftp error and cannot connect to the remote host,
then when i clicked ok, it would tell me there as an eror trying to
load an empty document.
My problems started after upgrading leopard MacOSX 10.5.
However, it seems that this problem is persistant everytime i
restart Dreamweaver, do you know how i can permanantly solve this
and why its being caused?
Thanks
Derek

Similar Messages

Dreamweaver CS3 and Mac OS 10.4.11 Incompatability

I have been using Dreamweaver CS3 under OS 10.4.10 for a few
months without significant issues... but after upgrading to 10.4.11
there is a significant problem.
I am unable to access any of my remote servers to upload
files to the sites I have built.
I was able to reinstall Dreamweaver 8 and it works fine with
all the same setups
I've read a technote on a noted problem with Dreamweaver CS3
and Mac OS 10.5 - but it also appears to happen on 10.4.11
You can read the 10.5 technote here:
http://www.adobe.com/go/kb402780

I have not experienced this problem. Try removing the DW CS3
preferences file in your Library and then let DW build a new one.
BTW, what error you are getting when you try to FTP?

Eye TV 250 Plus and Mac OSX Leopard

Does this device work well with Leopard? Also, has anyone used this device to capture VHS to MPEG-2? Does it do so without dropped frames?
I understand this device can buffer Live TV to RAM. Is ok to do with Leopard and does it make that RAM available again after closing the app.? Thanks.

Canopus will convert the analog source to DV format which is natively editable by iMovie.
EyeTV 250 and EyeTV Hybrid will convert the analog source to MPEG2. To edit in iMovie you need to further convert the MPEG2 files using MPEG Streamclip (free) and the Apple QuickTIme MPEG2 Playback Component ($20). You can convert them to AIC or DV for best editing results. I deinterlace in this step, as well. If you don't plan to edit, you can sent the MPEG2 files directly to TOAST from the EyeTV software. You can also convert the MPEG2 files to h.264 format using the EyeTV software for use on AppleTV, iPhone, iPod, iTunes, etc.
Personally, I use the EyeTV Hybrid, which is all you need if you have an Intel Mac. If you have a Power PC Mac, get an EyeTV that offloads the processing such as the 250. I have to go through an extra step before editing, but I am getting excellent results, and I also get to watch and record HDTV on my Mac.
These days, I should also mention that the EyeTV solution connects via USB, while the Canopus connects via Firewire. Some recent MacBooks do not have a Firewire port, but if you have an older Macbook, or any iMac, Mac Pro, MacBook Pro, Mac Mini, they should all have firewire.

HTTPS and MMHttp in Dreamweaver CS3 for Mac

MMHttp doesn't seem capable of HTTPS communication in
Dreamweaver CS3 for Mac.
When I do something like
MMHttp.getText("https://americanexpress.com");
the resulting response has no data and a status code of 0.
With
MMHttp.getText("
http://americanexpress.com");
(i.e. non-SSL) the response has data and a status code of
200.
This works fine on a Windows version of Dreamweaver CS3. Does
anyone have any suggestions?
I've only tried this on a trial version of DW CS3 for Mac.
I'm hoping to get a full version soon.

I managed to get a full copy of Dreamweaver CS3 for the Mac.
HTTPS doesn't work with MMHttp there either.
Do you have any suggestions?

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?

Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?

I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
anitabean wrote:
Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
Crossing my fingers and loading Leopard....
Cheers.

CF8 on Mac OSX Leopard

Hi All
Got my new Macbook Pro (OSX version 10.5.2), need to setup
CF8.... I tried installing CF8 using the Mac's Apache Web Server
and ran into configuration issues. Ran out of time, so I
uninstalled and tried to install CF8 using CF's built in web server
(and run from port 8500). I got the same result - I couldn't run CF
because it wouldn't start, couldn't bring up
http://127.0.0.1:8500/cfide/administrator/index.cfm
Does anyone have a straight forward path of installing CF8 on
the Mac OSX Leopard? I have uninstalled CF and don't want to move
forward until I get a warm and fuzzy from someone who's already
done this.... anyone?
Thanks in advance,
Rich

Good news! Adobe has released ColdFusion 8.01, which among
many other
fixes and enhancements, supports Leopard!
You can get it by downloading the Developers Edition now.
Lawrence *Adobe Community Expert*
Cartweaver.com
ASP, PHP and CF shopping cart for Dreamweaver
"rich.leach" <[email protected]> wrote in
message
news:ft2k54$t2u$[email protected]..
> Update: ... just heard from Ben Forta: Since Leopard
came out after CF8
> technically it's unsupported, but any day Adobe will
release an updater
> for
> Leopard....
>
> Anyone have any success with the stand alone server,
port 8500? I turned
> off
> web sharing and rebooted, just for grins, and
> localhost:8500/cfide/administrator/index.cfm still just
runs and runs, no
> messages or feedback at all. Anyone?
>
> Thanks in advance,
>
> Rich
>

MBP running Mac OSX Leopard 10.5.8 cannot get past login screen even in safe boot

Help! I have a Macbook Pro purchased in 2009, running Mac OSX Leopard 10.5.8 which froze while running Adobe Illustrator. On reboot, it won't allow me to go past the login screen. I tried starting up from the disc, running disk verification and repair and repairing disk permissions, and trying to start up in safe boot, all to no avail. When the login screen comes up it gives the name of my hard drive with a (2) after it, which seems strange. Any suggestions short of reinstalling the system software? I don't want to lose my applications/data!

AnointedOne wrote:
My 1 year old MBP running OSX has got more sluggish. The little multicolored spinning timer wheel keeps appearing a lot more now, and I hate it! My MBP takes drastically longer to boot when i turn it on as opposed to when I just got it. My web pages take a long time to load. Can anyone help me? WHat can I do to speed up my MBP. I am a novice mac user. Again my mac is getting slower by the day and i dont know how to increase its overall performance. Is there any simple software that can boost overall performance or will I have to reformat my MBP? I have a 200gb HD with 50 gb free and 4 gb of ram.
Welcome to Apple's discussion groups.
Launch the Activity Monitor utility. Pull down the list near the top and set it to "All Processes". Click on the "CPU" column heading to put the highest CPU consumers at the top. Also click on the "CPU" tab in the lower part of the window to check the value for "% Idle". If that value is much above zero, check the other categories for signs of resource problems. If nothing there points to a possible problem, launch the Console utility and look for messages that might suggest a problem. If you see messages that you have trouble interpreting, post them here and someone should be able to help.

Mac OSX Leopard

My daughter was wondering if she could download Mac OSX Leopard on her HP Laptop that i bought her this christmas. So I was wondering if someone could answer this question.

She honestly only wants it for Photobooth, iChat and Garageband...
She's a musician...
By the way do anyone know of a program similar to either of these?
That's three probrams, not 2 and Photobooth and Garageband come with a new Mac, not with Leopard.
Tell her to buy a new MacBook then she will have all of that and more and will still be able to use all her Windows programs.

Dreamweaver CS3 for Mac crash

I want to create a tree panel in my extension. I do a test with "<mm:treecontrol>" and "<mm:treenode>" tags on Dreamweaver CS3 for Mac.
There are only two nodes in the testing tree panel, Dreamweaver crash instantly when I try to drag the node, but it works well on Dreamweaver CS4 for Mac although the tags don't support drag.
Is it a Dreamweaver CS3 for Mac bug?
Does anyone have solution to resolve this issue?
Thanks
Simon

I've been a Mac convert for about 2 years now. Right now, I'm
running DW CS3 on an Intel iMac and it runs beautifully. On my
Powerbook G4 (1.33 GHz PPC G4 and 2 GB of ram) the performance is
slightly lacking. One thing to be wary of with adobe products -
they can be memory hogs. Photoshop is especially notorious for
this.
Also, the more you have installed on a Mac laptop, the slower
it will run. Mine used to take a few minutes to boot because of all
the programs I had installed, and nothing was starting up with the
machine. After a format and clean install it runs like new.
That is something for you to consider, if you have all the
necessary software to reinstall everything you want. I never turn
off any features in DW and I have only had a few buggy problems.
Nothing major though.

Adobe Reader 9 and Mac OSX 10.5 - FDF Issue

I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
When submitting a form from within a PDF, the FDF that gets sent is completely blank.
Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
Any help is greatly appreciated.

Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
Version 9.0.0
Installing/fixing installation
Then immediately get this error message:
Adobe Reader could not install correctly.
Adobe Reader was unable to install a necessary component
and must quit.
Any help out there for me?
Thanks, Tony

Wipe and install OSX Leopard without the disk

Hi everyone,
I need to wipe my iMac and reinstall OS X Leopard. I have the install disks, but my CD drive doesn't work and can't read the disk.
Is there a way for me to wipe and install OSX Leopard without the disk?
Thanks.

You can turn the 2011 iMac into a Firewire Optical drive.
Put the Leo Install Disc into the 2011 iMac, boot the 2011 iMac while holding t key to put it into FW Target Disk Mode, with a FW cable connect the the 2, boot older one holding Alt key, choose the Leo Install Disc to boot from.

SWF problem in Dreamweaver CS3 and strange Script file

Hi folks, I am using Dreamweaver CS3 and tried to upload a
SWF file today. The SWF includes three buttons, one for video,
another for audio and one for text. Before loading up to DW all
three parts played fine. But when I uploaded to DW and my site, the
video fails to play. A Script file, and another file downloaded I
am not sure what I am supposed to do with this script file. The
script file is called The audio and text part works fine, but the
video will not play. I am not sure why this is, but when I uploaded
the file to Dreamweaver there was a Script file called
AC_RunActiveContent.js that automatically downloaded along with a
file called .htaccess
The other file is called called .htaccess
I uploaded both files to my server, but that did not help the
video play. I tried pasting the AC_RunActiveContent.js code into my
page and uploading, but that did not help the video play either; I
just got code at the bottom of my page.
I have viewed the page in Mozilla, IE7 and Flock, but still I
cannot play the video.
Does anyone have any idea how to make the video play in
Dreamweaver; what I am supposed to do with these two code files?
For those interested in the AC_RunActiveContent.js code, I
will post below. Please try to explain simply because I am not so
tech savvy.
I thank you all.
Mary

I have managed to fathom it out.

Dreamweaver CC 2014 - Mac OSX 10.8.5 - Il programma gira molto lentamente

Dreamweaver CC 2014 - Mac OSX 10.8.5 - Il programma gira molto lentamente, tale da non riuscire a lavorare.
Prove già eseguite:
- 1) Disinstallato e reinstallato il programma, ma il problema persiste.
- 2) Disinstallato per sicurezza Dreamweaver CC (versione precedente) e il problema persiste.
- 3) Eliminati i file:
Utenti/Home/Libreria/Preferences/Adobe Dreamweaver CC 2014 Prefs,
Utenti/Home/Libreria/Preferences/com.adobe.dreamweaver-14.0.plist,
Utenti/Home/Preferences/Adobe/Adobe Dreamweaver CC Prefs,
Utenti/Home/Libreria/Preferences/com.adobe.dreamweaver-13.2.plist,
Utenti/Home/Libreria/Preferences/Adobe/Dreamweaver/14.0/AppPrefs.xml,
e il problema persiste.
- 4) Riavviando la macchina con le estensioni disabilitate il problema non c'è.
- 5) Creando nuovo utente il problema non c'è.
Che soluzione posso avere?
Grazie

hi hughestl,
Can you please try upgrading from 10.7.2 to to 10.7.x where x is the latest version,or at least 10.7.3 on which NSBackingPropertyOldScaleFactorKey is supported. NSBackingPropertyOldScaleFactorKey is not supported on 10.7.2.
Thanks
Kusha!

Adobe Reader 9 Silent Install Mac OSX Leopard

When I try to install the pkg silently (I want to distribute it on all our machines) nothing seems to happen. I'm running leopard on intel.
This is what i try to do:
installer -pkg AdbeRdr90_en_US_i386.pkg -verbose -target /
this is my result:
installer: Package name is Adobe Reader 9
installer: Upgrading at base path /
installer: Preparing for installation.....
installer: Preparing the Disk.....
installer: Preparing Target Volume
installer: Preparing Adobe Reader 9.....
installer:
installer: Installing Adobe Reader 9.....
installer:
installer: Configuring Installation
installer: Validating package
installer: Writing files
installer: Writing files: 0% complete
installer: Writing files: 0% complete
installer: Running Installer Script
installer: Writing package receipt
installer: Finishing Installation.....
installer: Finishing Installation
I'm worried about the lines :
Writing files: 0% complete
Has anyone seen this problem before? When I run the install manualy so by clicking on in the finder the install just runs fine.
Many thanks in advance!
Bjorn

Hi Bjorne,
Looks like I've got the same issue, only with Flash Player 9 Silent installer on Mac OSX Leopard. Did you find a workaround?
Stuart

Dreamweaver CS3 and Mac OSX Leopard 10.5

Similar Messages

Maybe you are looking for