Dreamweaver CS3 Connecting To SQL Express 2005

Hi Guys,
I'm having problems connecting
Dreamweaver CS3 to
SQL Express 2005, the error message that comes back is not
very helpful, "An Unidentified Error has Occurred"
Have any of you successfully connected
Dreamweaver CS3 to
SQL Express 2005 ?
Thanks
Jay

> I'm having problems connecting
Dreamweaver CS3 to
SQL Express
> 2005, the error message that comes back is not very
helpful, "An
> Unidentified Error has Occurred"
>
> Have any of you successfully connected
Dreamweaver CS3 to
SQL
> Express 2005 ?
Yes, the connection string is not dependant upon the software
used to create
the website. Here's a couple of examples, or you can find
more at
http://www.connectionstrings.com:
Provider=sqloledb;Data Source=computer_name_or_IP;Initial
Catalog=database_name;UID=username;PWD=password
DRIVER={SQL
Server};SERVER=Computer_name\instance_name;DATABASE=database_name;UID=username;PWD=passwo rd

Similar Messages

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Website can't communicate with db - SQL Express 2005

Here's the error message: [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Microsoft][ODBC SQL Server Driver][SQL
Server]Invalid object name.
I have successfully connected to the db through coldfusion
admin. I can see the tables in SQL Express 2005, manipulate them,
etc... When I fire up my website, I get that error. I can't figure
out how to solve this and I'm desperate at this point.
Thanks for any help.

Lol - I figured it out 5 minutes after I posted this (3 hours
after this started). I had the driver pointing to the master
database instead of the 'real' db beneath it. I had changed the
settings previously, but they didn't take hold until I rebooted the
server.
... will this MS nightmare never end? This is why I went to
CF in the first place. CF works. MS is a series of endless
patches.

SQL Express 2005

Hi,
Does anyone know if SAP B1 can run on SQL Express 2005 db. An error occurs when creating the tables for new db. Could it be access rights?
Thanks.

We have the same problem on a SQL Server 2005 9.00.4035.00. Windows 2003, SP2.
I am not able to use the SQL Server Configuration Manager or Surface Area Configuration Manager tools. When I open them, I get the error messages excerpted below:
Configuration Manager: Cannot connect to WMI provider......The specified module could not be found.
Surface Area Configuration (both options): .....An exception occurred in SMO while trying to manage a service (Microsoft.sqlserver.smo). Failed to retrieve data for this request (Microsoft.Sqlserver.SmoEnum)........
This must have happened sometime in the past few weeks, because it worked a few weeks ago. It works fine on all the other SQL 2005 servers. If the server is changed to another sql server, using the tool on the problem server, it works fine. If I log onto another server, and change the tool to point to this problem server, it gives the same error messages. SQL Services and the WMI service are started. Rebooting does not affect it. I tried the mofcomp suggestion with no effect. None of the suggestions in this thread above have solved this issue.
Do you think reinstalling Client Tools might solve it? I do not know if these configuration tools are installed with database engine or client tools.

Unable to install SQL Express 2005 on W7 Pro machine

I am trying load a Toshiba Telecom application on a W7 Pro 64bit machine. The application has SQL Express 2005 embedded and will not install completely. I downloaded the SQL Express 2005 SP3 from MS and it comes up during the installation and states
that the PC does not have the proper hardware requirements and that it cannot install because of the wrong ASP file. The machine is an i7 with 16GB ram and 1.7TB hard drive. Can anyone help? I have the same application loaded on other W7 Pro machines with
no problem.

Hi Patriot76,
According to your description, you fail to install SQL Server 2005 express SP3. Please help to post the complete setup error log here for analysis. By default, SQL Server setup log file locates in C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Log.
In addition, please confirm if your SQL Server is installed successfully.
For the hardware requirements, please make sure that your disk has at least 600 MB of available hard disk space. To install SQL Server 2005 express SP3 successfully, please pay attention to the points below.
1.Make sure that you have administrative rights on the computer.
2.Make sure that Microsoft .NET Framework 2.0 or later is installed. If you do not have the .NET Framework 2.0 installed, you must download and install it before you install SP3.
3.Make sure that you install 64-bit SQLEXPR.EXE based on your 64-bit operation system.
4.Make sure that you stop all applications and services that make connections before you install SP3.
Regards,
Michelle Li

Can i open an SQL express 2005 database in SQL server express 2012?

Hi,
i have a database and it's in SQL express 2005 but because my windows 8 is not compatible with the installer, i have to install the latest 2012 installer. my problem now is that i cannot open it in the 2012 edition..what do i have to do?

Hi white_roses,
Could you let us know how do you restore the database to SQL Server 2012 Express edition? Please help to collect the detail error information of this issue, it will benefit for us to do further investigation.
As Sandesh and ED suggested above, we can directly detach our databases from SQL Server 2005 and then attach them to SQL Server 2012. For detail steps, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms187858.aspx
After we move a database from the instance of SQL Server on server A to the instance of SQL Server on server B, users may be unable to log in to the database on server B. If need the logins information on Server B, please refer to the following article:
http://support.microsoft.com/kb/918992
If you have any question, please feel free to let me know.
Thanks,
Jerry Li

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat

I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.

amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P

UCCE 7.X Connection to SQL Express

Hello,
Is the connection to SQL Express external database different than the connection to SQL external database? I'm using UCCE 7.2.6 and I'm not having success accessing a SQL Express external database the sameway I access a SQL external database.
I know in the registry, the SQL login value is \\machine_name\datbase_name=(user,password) where:
machine_name is the name of the SQL server computer
database_name is the name of the database on that SQL server computer
user and password are the logon credentials
So how do I do the above if the machine_name is machine_name\SQLEXPRESS? This puts an extra "\" in the syntax...
Please assist.
Thanks,
MB

First thing I would confirm is that Named Pipes is enabled on the SQL Server instance.
If memory serves, you may also have to create an Alias to a named SQL instance.

How Crystal Report XI connect o sql server 2005

hi
i am tring to create a report connecting to sql server 2005, however, i could not find a proper provider to connect sql server 2005, and i found Microsoft OLE DB provider for sql is only suited for sql server 2000 and earlier version, and i dont want to use ODBC connecting, so my question if there is other way to connect sql 2005 in the Crystal report XI?

Hi
Due to timing of product release dates, Crystal Reports XI was not tested with Microsoft SQL Server 2005. The changes made to connectivity drivers for MS SQL Server 2005 are significant and have been addressed in Crystal Reports XI Release 2.
As per Supported platforms document of CR XI only the below SQL servers are supported:
Microsoft SQLServer 2000 SP3 with
- ODBC MDAC 2.8
-JDBC SQLServer 2000
- OLEDB MDAC 2.8
Microsoft SQLServer 7.0 SP4 with
-ODBC MDAC 2.7
-OLEDB MDAC 2.7
However MS SQL Server 2005 is mentioned as supported in CRXIR2 as below:
MS SQL Server 2005 with
- Microsoft ODBC MDAC 2.8
-Microsoft ODBC SNAC (Native Client)
-Microsoft OLEDB MDAC 2.8
-Microsoft OLEDB SNAC (Native Client)
Contact your sales representative to obtain a copy of Crystal Reports XI Release 2. A minor product update is required for CR XI Release 2 to enable reporting off MS SQL Server 2005.
For more information regarding changes in CRXI and CRXIR2 please refer to the documentations in the link provided by Amit.
Hope this helps!!
Regards
Sourashree

Transferring 3 SQL databases from both SQL Express 2005 and Standard to a new physical server

I am trying to figure out the best method for transferring SQL 2005 databases from 2 different physical servers to a new server running windows server 2008 64bit.
I own a fully registered copy of Microsoft SQL 2005 32bit Standard Edition. However all of my SQL databases together are only 4GB in size thereby making 2008 SQL Express an option.
Here is the breakdown of the servers:
1) (Old Server1) Windows 2003 Server 32bit - SQL Express 2005 32bit
2) (Old Server2) Windows 2003 Server 32bit - SQL Server 2005 32bit Standard
3) (New Server) Windows 2008 Server 64bit - (Not sure which version to install)
**The objective is to migrate 2 SQL databases from Old Server1 and 1 SQL database from Old Server 2 to the New Server. What version should I install on the new server??? Do I go with 2008 express or install the 2005 Standard Edition?
Pending your response to which version to install, what are the correct steps to migrate (which I have never done before) the databases from both of these servers to the new server?
I have researched this online and I think this particular situation is unique in that I am transferring from both SQL Express and Standard from 2 different physical servers to a 2008 server that is 64bit. I cannot find anything online that I feel confident
in trying. Please help me, as I have this migration deadline of this weekend. Any help is appreciated. Thanks.

Hello,
You may choose between using backup/restore or using detach/attach methods to migrate the databases.
https://msdn.microsoft.com/en-us/library/ms187858(v=sql.90).aspx
You can transfer logins using the following article.
http://support.microsoft.com/en-us/kb/918992
To decide if you migrate to Express Edition or to another edition, please review the features supported by each edition. For instance, Express Edition does not support jobs (SQL Server Agent is not available).
https://msdn.microsoft.com/en-us/library/cc645993(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Connecting to SQL Server 2005 Express

Hi All,
Have gone through the forums but can't seem to fix this problem.
I'm running DW 8 and ASP.NET VB pages (XP Pro, IIS 5.1) and cannot get DW to connect to SQL 2005 Express. Please see attached error message.
I have no problem connecting when I'm in Visual Web Developer 2008 Express.
The settings in DW when I have a ASP.Net page open are;
"Persist Security Info=False;
Data Source=[mycomputer];
Initial Catalog=[mydatabase];
User ID=[myuser];
Password=[*************]"
Would appreciate someone's wisdom here, I much prefer to use DW than VWD!!
Thanks in advance.
Pete

Question moved to the appropriate forum: Dreamweaver Application Development.

Error connecting to SQL server 2005 from Dreamweaver 8

Hi I have a database in SQL server 2005.I just started using
dreamweaver's server behaviours.When I use the "log in" behaviour I
get the following error.
Microsoft VBScript compilation (0x800A0401)
Expected end of statement
/MyBlog/Connections/connBlog.asp, line 9, column 38
MM_connBlog_STRING = Provider=SQLOLEDB;workstation
id="FAZ-F6EE655890B";integrated security=SSPI;data
source="FAZ-F6EE655890B\SQLEXPRESS";persist security
info=False;initial catalog=MyBlog;
-------------------------------------^
First thing that came to my mind was obviously my database
conn isnot right but when I define a conn using the built in
dreamweaver's dialogue and test it, it says that the test
succeeded.Also in the dialogue for the "login page" it shows the
values of fields from the database, so it is definitely connecting
to the database.So I don't know why am i getting this error.Please
someone help!

See if this TechNote helps:
ASP error "VBScript compilation error '800a0401' "
http://www.adobe.com/go/15717
Are you using the ASP VBScript server model?
Try creating a simple recordset that displays all records
from a table and
see if you can get that to work. It's less complex code than
the user
authentication server behavior and might help to isolate the
problem.
David Alcala
Adobe Product Support

Connect to SQL Server 2005 Express MDF file

Post Author: ims_user
CA Forum: Data Connectivity and SQL
Is it possible to connect directly to a SQL Server 2005 Express MDF file? Every time I select SQL Native Client it expects me to put in a server name etc, but there is no where to put in a file name or connection string. My application connects to this file directly using this in the connection string
Data Source=.\SQLEXPRESS;AttachDbFilename=
I now need to report on the data it contains.
Many thanks.

Post Author: ims_user
CA Forum: Data Connectivity and SQL
Is it possible to connect directly to a SQL Server 2005 Express MDF file? Every time I select SQL Native Client it expects me to put in a server name etc, but there is no where to put in a file name or connection string. My application connects to this file directly using this in the connection string
Data Source=.\SQLEXPRESS;AttachDbFilename=
I now need to report on the data it contains.
Many thanks.

Connect to SQL server 2005 in web dynpro java

Hi,
I am new to web dynpro. I want to coonect to SQL server 2005 server from my simple application.
For that what and all the prerequisetion and what and all the steps to follow.
I have created a database and the table too. I have created the application too. But i am not able to connect to sql. what might be the problem. I tried to create the data source in visual administration. and written code in the view like this.
try {
                                               String userName = "jktuser";
               String password = "jkt12345";
               String url ="jdbc:microsoft:sqlserver://jktr3:50000;database=student";
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver ").newInstance();
               Connection con =DriverManager.getConnection(url, userName, password);
               System.out.println("Database connection established");
               Statement st = con.createStatement();
               String str = "select * from studentdata";
               ResultSet rs = st.executeQuery(str);
               while (rs.next()) {
               String str1 = rs.getString(1);
               wdComponentAPI.getMessageManager().reportSuccess(str1);
                                                String str2 = rs.getString(2);
               wdComponentAPI.getMessageManager().reportSuccess(str2);
               wdComponentAPI.getMessageManager().reportSuccess("sukces");
          } catch (Exception e) {
               wdComponentAPI.getMessageManager().reportWarning(e.toString());
And i am getting this error
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]End of stream was detected on a read.
Plz any one help me in this.
Regards,
H.V.Swathi
Edited by: H.V Swathi on Nov 21, 2008 6:46 AM
Edited by: H.V Swathi on Nov 21, 2008 7:16 AM
Edited by: H.V Swathi on Nov 21, 2008 7:17 AM

Hi,
I have tried all the steps to configure the remote connection but it is giving an error that says,
"Computer localhost does not exist on the network, or the computer cannot be configured remotely. Verify that the remote computer has the required Windows Management Instrumentation components and then try again. (SQLSAC)
ADDITIONAL INFORMATION:
An exception occurred in SMO while trying to manage a service. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.InnerWmiException&LinkId=20476
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServer&LinkId=20476
The operation could not be completed. (WinMgmt)
BUTTONS:
OK
Please i welcome your valuable inputs.
Thanks & Regards
Swathi

ODBC connect to SQL Server 2005 from Oracle 10.2.0.3 32bit Linux

I’m unable to establish a connection from Oracle 10.2.0.3 32bit Linux to SQL Server 2005.
The ODBC driver is the 32bit DataDirect 5.3 drivers and when I do a status on the listener it does have a handler for SQLDB
Any help is appreciated.
Received the following error:
SQL> select count(*) from columns@SQLDB;
select count(*) from columns@SQLDB
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/app/DataDirect/lib/libodbc.so'
ORA-02063: preceding 3 lines from SQLDB
-----Contents of trace file------------------
Oracle Corporation --- THURSDAY JUL 10 2008 10:17:16.251
Version 10.2.0.3.0
hoagprd (2): ; hoagprd Entered.
HOACONN.C (244): ; [Generic Connectivity Using ODBC] version: 4.8.2.0.0080
HOACONN.C (288): ; Class version: 250
hoagprd (2): ; hoagprd Exited with retcode = 0.
hoainit (3): ; hoainit Entered.
(0): ; connect string is: defTdpName=SQLDB;SYNTAX=(ORACLE8_HOA, BASED_ON=
ORACLE8, IDENTIFIER_QUOTE_CHAR="", CASE_SENSITIVE=CASE_SENSITIVE_QUOTE);
BINDING=<navobj><binding><datasources><datasource name='SQLDB' type='GENERIC_
ODBC_FOR_HS' connect='SQLDB'><driverProperties/></datasource></datasources><
remoteMachines/><environment><optimizer noFlattener='true'/><misc
year2000Policy='-1' consumerApi='1' sessionBehavior='4'/><queryProcessor
parserDepth='2000' tokenSize='1000' noInsertParameterization='true'
noThreadedReadAhead='true' noCommandReuse='true'/><debug driverTrace='true'
generalTrace='true'/></environment></binding></navobj>
ORACLE GENERIC GATEWAY Log File Started at 2008-07-10T10:17:16
hoainit (3): ; hoainit Exited with retcode = 0.
hoalgon (7): ; hoalgon Entered. name = dbuser.
sysbase.c (677): ; libodbcinst.so: cannot open shared object file: No such
file or directory
DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
DB_ODBC_INTERFACE (727): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol '
SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
nvRETURN (./drv_bind.c 230): -2220
nvRETURN (./nav_bind.c 298): -2220
hoalgon (7): ; hoalgon Exited with retcode = 28500.
hoaexit (6): ; hoaexit Entered.
hoaexit (6): ; hoaexit Exited with retcode = 0.
(0): ; Closing log file at THU JUL 10 10:17:16 2008.
--------------end of trace file ---------------
--------TNS entry ----------
SQLDB=
(DESCRIPTION =
(ADDRESS =(PROTOCOL = TCP)
(Host = oracledbhost)
(Port = 1521)
(CONNECT_DATA = (SID =SQLDB)
(HS=OK)
-------Listener.ora entry----------
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(PROGRAM=hsodbc)
-------initSQLDB.ora----------
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = SQLDB
HS_FDS_TRACE_LEVEL = 4
HS_FDS_TRACE_FILE_NAME=/app/DataDirect/SQLDB.trc
HS_FDS_SHAREABLE_NAME=/app/DataDirect/lib/libodbc.so
# ODBC specific environment variables
set ODBCINI=/app/DataDirect/odbc.ini
------odbc.ini entry------------
[SQLDB]
Driver=/app/DataDirect/lib/ivmsss23.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=SQLServerhost,1401
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SQLServerDB
LoadBalancing=0
LogonID=
Password=
QuotedId=No
SnapshotSerializable=0

The error message is indicating problems loading the driver manager.
A common issue on Linux (especially on Suse Linux) is related to library caching. First of all make sure you add the LD_LIBRARY_PATH to your listener.ora file to guarantee the correct libraries will be loaded. Your SID section will then look like:
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(ENVS=LD_LIBRARY_PATH=/app/oracle10g/product/10.2/lib:/app/DataDirect/lib)
(PROGRAM=hsodbc)
After changing the listener.ora file stop and start the listener.
Details about the set up can be found in Metalink note:
Note.264567.1 P216. How To Setup Generic Connectivity - HSODBC - on Linux
If this does not help enable strace and check out from which location libodbc.so is being loaded.
Please be also aware HSODBC has been desupported 15th of March. As you start a new project you should proceed with the follow up product DG4ODBC.

Dreamweaver CS3 Connecting To SQL Express 2005

Similar Messages

Maybe you are looking for