Unable to install SQL Express 2005 on W7 Pro machine
I am trying load a Toshiba Telecom application on a W7 Pro 64bit machine. The application has SQL Express 2005 embedded and will not install completely. I downloaded the SQL Express 2005 SP3 from MS and it comes up during the installation and states
that the PC does not have the proper hardware requirements and that it cannot install because of the wrong ASP file. The machine is an i7 with 16GB ram and 1.7TB hard drive. Can anyone help? I have the same application loaded on other W7 Pro machines with
no problem.
Hi Patriot76,
According to your description, you fail to install SQL Server 2005 express SP3. Please help to post the complete setup error log here for analysis. By default, SQL Server setup log file locates in C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Log.
In addition, please confirm if your SQL Server is installed successfully.
For the hardware requirements, please make sure that your disk has at least 600 MB of available hard disk space. To install SQL Server 2005 express SP3 successfully, please pay attention to the points below.
1.Make sure that you have administrative rights on the computer.
2.Make sure that Microsoft .NET Framework 2.0 or later is installed. If you do not have the .NET Framework 2.0 installed, you must download and install it before you install SP3.
3.Make sure that you install 64-bit SQLEXPR.EXE based on your 64-bit operation system.
4.Make sure that you stop all applications and services that make connections before you install SP3.
Regards,
Michelle Li
Similar Messages
-
Unable to install SQL server 2000 and 2005 on Satellite A205-s5831
Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response meHi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software -
Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1
Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
What can I do to get this working?Hi Zgreve,
Usually, from
hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
Microsoft SQL Server 2014 Express.
Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
If the same error about OS still exists, I recommend you submitting a feedback to Microsoft such issues at
https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
exciting projects on Microsoft Connect.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install Sql Server 2008 R2 express on windows 2003
Hi,
I am unable to install sql server express edition with management tools, on windows server 2003. During rules check, it gives an error that minimum os version is not supported.
.net framework requirements have been met.
Is there something that I am missing ? Any pointers would be of immense help
thanks
SaagarHello,
Whats is Service Pack edition of Windows 2003 server.As per prerequisites it requires SP2 for windows Server 2003 I guess your server is not updated to latest SP.Please refer below link for hardware and software requirement
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)
I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
Could someone please help me. Thanks in advance!
=== Verbose logging started: 3-4-2009 9:33:00 Build type: SHIP UNICODE 4.05.6001.00 Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
******* Action:
******* CommandLine: **********
MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
=== Verbose logging stopped: 3-4-2009 9:33:37 ===This post should definitely help you
http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
Feroz
Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights. -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Can i open an SQL express 2005 database in SQL server express 2012?
Hi,
i have a database and it's in SQL express 2005 but because my windows 8 is not compatible with the installer, i have to install the latest 2012 installer. my problem now is that i cannot open it in the 2012 edition..what do i have to do?Hi white_roses,
Could you let us know how do you restore the database to SQL Server 2012 Express edition? Please help to collect the detail error information of this issue, it will benefit for us to do further investigation.
As Sandesh and ED suggested above, we can directly detach our databases from SQL Server 2005 and then attach them to SQL Server 2012. For detail steps, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms187858.aspx
After we move a database from the instance of SQL Server on server A to the instance of SQL Server on server B, users may be unable to log in to the database on server B. If need the logins information on Server B, please refer to the following article:
http://support.microsoft.com/kb/918992
If you have any question, please feel free to let me know.
Thanks,
Jerry Li -
Upgrade english sql express 2005 to spanish sql standar 2008
Hello.
I've bought a license of sql standar 2008.
When I added the license at Microsoft Volume Licensing Service center I chosed the spanish version because the SO was in Spanish.
But I didn't know that there was an old slq 2005 express in Englis installed in the same server where i want to install the new one.
Now, when I try to upgrade, the assistant says that it's impossible because the previous version is in english and the new version is in spanish.
It's possible to change the language of sql at Microsoft Volume Licensing Service and download the english version?
Can I change the languaje of the installed sql express to spanish?
What can I do?
ThanksHi ,
According to your description, if the language of OS is Spanish, and the license of SQL Server 2008 standard version is the Spanish version. I recommend you should reinstall SQL Server 2008 in Spanish as an named instance or
uninstall SQL Server 2005 express in English and reinstall SQL Server 2005 express in Spanish, then upgrade this version to the SQL Server 2008 standard.
In addition, for more detailed information regarding to the license issue, please call
1-800-426-9400,
Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi,
Does anyone know if SAP B1 can run on SQL Express 2005 db. An error occurs when creating the tables for new db. Could it be access rights?
Thanks.We have the same problem on a SQL Server 2005 9.00.4035.00. Windows 2003, SP2.
I am not able to use the SQL Server Configuration Manager or Surface Area Configuration Manager tools. When I open them, I get the error messages excerpted below:
Configuration Manager: Cannot connect to WMI provider......The specified module could not be found.
Surface Area Configuration (both options): .....An exception occurred in SMO while trying to manage a service (Microsoft.sqlserver.smo). Failed to retrieve data for this request (Microsoft.Sqlserver.SmoEnum)........
This must have happened sometime in the past few weeks, because it worked a few weeks ago. It works fine on all the other SQL 2005 servers. If the server is changed to another sql server, using the tool on the problem server, it works fine. If I log onto another server, and change the tool to point to this problem server, it gives the same error messages. SQL Services and the WMI service are started. Rebooting does not affect it. I tried the mofcomp suggestion with no effect. None of the suggestions in this thread above have solved this issue.
Do you think reinstalling Client Tools might solve it? I do not know if these configuration tools are installed with database engine or client tools. -
Transferring 3 SQL databases from both SQL Express 2005 and Standard to a new physical server
I am trying to figure out the best method for transferring SQL 2005 databases from 2 different physical servers to a new server running windows server 2008 64bit.
I own a fully registered copy of Microsoft SQL 2005 32bit Standard Edition. However all of my SQL databases together are only 4GB in size thereby making 2008 SQL Express an option.
Here is the breakdown of the servers:
1) (Old Server1) Windows 2003 Server 32bit - SQL Express 2005 32bit
2) (Old Server2) Windows 2003 Server 32bit - SQL Server 2005 32bit Standard
3) (New Server) Windows 2008 Server 64bit - (Not sure which version to install)
**The objective is to migrate 2 SQL databases from Old Server1 and 1 SQL database from Old Server 2 to the New Server. What version should I install on the new server??? Do I go with 2008 express or install the 2005 Standard Edition?
Pending your response to which version to install, what are the correct steps to migrate (which I have never done before) the databases from both of these servers to the new server?
I have researched this online and I think this particular situation is unique in that I am transferring from both SQL Express and Standard from 2 different physical servers to a 2008 server that is 64bit. I cannot find anything online that I feel confident
in trying. Please help me, as I have this migration deadline of this weekend. Any help is appreciated. Thanks.Hello,
You may choose between using backup/restore or using detach/attach methods to migrate the databases.
https://msdn.microsoft.com/en-us/library/ms187858(v=sql.90).aspx
You can transfer logins using the following article.
http://support.microsoft.com/en-us/kb/918992
To decide if you migrate to Express Edition or to another edition, please review the features supported by each edition. For instance, Express Edition does not support jobs (SQL Server Agent is not available).
https://msdn.microsoft.com/en-us/library/cc645993(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4
Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Error while installing SQL Server 2005 SP3
I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.I have installed SQL Server 2005 Standand Edition (32-bit) on a standalone server machine running
Windows Server 2003 R2 Standard 64-bit with Service Pack 2. After installing SQL Server, when I tried installing the Service Pack 3 (as per application requirement) through local administrator account, I am repeatedly getting below error in
"C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\Redist9_Hotfix_KB955706_SqlSupport.msi.log"
SECUREREPAIR: SecureRepair Failed. Error code: 4ec4E6A3388
MSI (s) (F8:40) [16:49:33:515]:
Error 1260. Windows cannot open this program because it has been prevented by a software restriction policy.
I have checked rights on the folders and also got the anti-virus (symantec) services stopped on the server. Still no success, can anyone help.
Just to add: Have already referred
http://support.microsoft.com/kb/918357 -
Error 1406 while installing SQL server 2005 on windows 2003 64 bit standard
Hi Gurus,
When I am trying to install SQL SERVER 2005 on Windows Serevr 2005 i get the error code 1406
I tried using the script sql4sap.vbs. and tried to set the named instance.
please suggest
Please find the contents of the Summary.txt
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Mon Apr 14 14:51:07 2008
Machine : UKSAPTEST02
Product : .NET Framework 2.0
Product Version : 2.0.50727
Install : Failed
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST02_.NET Framework 2.0.log
Last Action : InstallFinalize
Error String :Could not write value to key \Software\Classes\.appref-ms
Error Number : 1406
UKSAPTEST02 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information.
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
Time : Mon Apr 14 14:52:26 2008
List of log files:
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST02_Core.log
Many thanks
Sreeram
Edited by: sreeram kaki on Apr 14, 2008 6:12 PMHi Clas,
Thanks for the valuable suggestions,
I tried to install the database (sql server 2005) using the local admin password on another server which do not have the antivirus installed. I started the installation at 3:15 PM today and the installation is still in progerss
please see the log below from Summary.txt.
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Tue Apr 15 15:04:28 2008
Machine : UKSAPTEST01
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLSupport_1.log
Machine : UKSAPTEST01
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLNCLI_1.log
Machine : UKSAPTEST01
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SqlWriter_1.log
Machine : UKSAPTEST01
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_MSXML6_1.log
Machine : UKSAPTEST01
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLSupport_2.log
Machine : UKSAPTEST01
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_SQLNCLI_2.log
Machine : UKSAPTEST01
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_BOL_1.log
Machine : UKSAPTEST01
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_UKSAPTEST01_MSXML6_2.log
Also see the last few lines of the log file
SQLSetup0001_UKSAPTEST01_SQL.log
Action start 17:10:43: Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!50) [17:10:43:815]: PROPERTY CHANGE: Deleting Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '1 0 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
Action ended 17:10:43: Rollback_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<Func Name='ScheduleActionX'>
<Func Name='SetCAContext'>
MSI (s) (C0!50) [17:10:43:815]: PROPERTY CHANGE: Adding Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its value is '1 1 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
MSI (s) (C0!50) [17:10:43:815]: Doing action: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Action start 17:10:43: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!50) [17:10:43:830]: PROPERTY CHANGE: Deleting Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '1 1 0 Installing Local Groups 50000 SQLServer2005MSFTEUser$UKSAPTEST01$RDE NT AUTHORITY\SYSTEM '.
Action ended 17:10:43: Do_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<EndFunc Name='Write_sqlGroupMember' Return='0' GetLastError='0'>
PerfTime Stop: Write_sqlGroupMember : Tue Apr 15 17:10:43 2008
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (C0:F0) [17:10:43:830]: Doing action: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
Action ended 17:10:43: Write_sqlGroupMember.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
MSI (s) (C0:50) [17:10:43:830]: Invoking remote custom action. DLL: C:\WINDOWS.0\Installer\MSI1D8.tmp, Entrypoint: Write_sqlUserSecurity
Action start 17:10:43: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
<Func Name='LaunchFunction'>
Function=Write_sqlUserSecurity
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: Write_sqlUserSecurity
PerfTime Start: Write_sqlUserSecurity : Tue Apr 15 17:10:43 2008
<Func Name='Write_sqlUserSecurity'>
<Func Name='ScheduleActionX'>
<Func Name='SetCAContext'>
MSI (s) (C0!34) [17:10:43:924]: PROPERTY CHANGE: Adding Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its value is '0 1 0 Setting User Security 50000 SQLServer2005SQLBrowserUser$UKSAPTEST01 SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeChan
MSI (s) (C0!34) [17:10:43:924]: Doing action: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Action start 17:10:43: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
MSI (s) (C0!34) [17:10:43:924]: PROPERTY CHANGE: Deleting Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B property. Its current value is '0 1 0 Setting User Security 50000 SQLServer2005SQLBrowserUser$UKSAPTEST01 SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005SQLAgentUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeChangeNotifyPrivilege SQLServer2005MSSQLUser$UKSAPTEST01$RDE SeIncreaseQuotaPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeServiceLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeBatchLogonRight SQLServer2005MSFTEUser$UKSAPTEST01$RDE SeAssignPrimaryTokenPrivilege SQLServer2005MSFTEUser$UKSAPTEST01$
Action ended 17:10:43: Do_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
<EndFunc Name='ScheduleActionX' Return='0' GetLastError='0'>
<EndFunc Name='Write_sqlUserSecurity' Return='0' GetLastError='0'>
PerfTime Stop: Write_sqlUserSecurity : Tue Apr 15 17:10:43 2008
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (C0:F0) [17:10:43:940]: Doing action: Write_sqlFileSDDL.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B
Action ended 17:10:43: Write_sqlUserSecurity.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B. Return value 1.
MSI (s) (C0:10) [17:10:43:940]: Invoking remote custom action. DLL: C:\WINDOWS.0\Installer\MSI1D9.tmp, Entrypoint: Write_sqlFileSDDL
Action start 17:10:43: Write_sqlFileSDDL.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B.
<Func Name='LaunchFunction'>
Function=Write_sqlFileSDDL
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: Write_sqlFileSDDL
PerfTime Start: Write_sqlFileSDDL : Tue Apr 15 17:10:43 2008
Thanks & Regards,
Sreeram
Edited by: sreeram kaki on Apr 15, 2008 6:45 PM
Maybe you are looking for
-
Photoshop Elements 3 trashing pictures
Hi everyone, I have been using Photoshop elements 3 on my G4 as shown below. It works fine and does exactly what I want except when I quit Photoshop it puts up all the pictures I have processed and I have to click Do not save for each of them. Is the
-
Balckberry Curve doesn't show outlook inbox subfolders
Hi Can anyone help me with a problem with a new backberry curve please? I have several sub folders for my inbox set up via outlook on the server but my blackberry doesn't show these and all emails stay in the inbox on the blackberry, no matter what h
-
TS4009 How do I get a refund for accidentally buying unwanted iCloud storage?
My receipt says: Date of Purchase: January 8, 2013 Next Payment: January 8, 2014 Payment Method: Store Credit Item: 10 GB storage plan, billed annually $20.00 Total: $20.00 * You may contact Apple for
-
I have Elements 13 as an additional external editor but when I select it in the under Photo - Edit in Elements 13 opens but the photo does not appear. Also when I went to Help it sent me to http://community.stage.corp.adobe.com/chcservices/services/
-
I have Roboform 6 and CG supplied by Comcast. Extentions tells me neither one is compatible with FF5.0. What can I do? On another problem, I upgraded against my better judgment because I like 3.6.17 better, but it kept crashing a couple of times a da