Drill down in Geo Map

Hi,
Is it possible to drill down from World Map to country specific map by clicking on the country? The "Functions of the Advanced Geo Function Bar" white paper mentioned Drilldown function in Context menu. However, I could not find Drilldown entry.
If it is possible, how can I set it up?
Any help is very appreciated.
Frank

Hi,
I am working on Geo MAP UI in Web dyn pro. The architecture say's the IGS is connected to External GIS server. What is this external GIS server and how this works? Any help would be greatly appreciated.
regards
vijay

Similar Messages

Drill Down for Map reports

Hi All,
I have a requirement in which i need a create a sales map report across all the states in NA.
i have created a main map report using the default map gallery and displayed all the sales figures across all the states in NA. Now i want to show the City level sales when i click on a particular state. The state on which i am going to click
should enlarge (or) it should redirect to other report having the particular statemap with city related values on it.
How can i do it please help..!
Do i need to download all the local statemaps and how do i store those maps in SQL server DB. Please explain in detail.
Thnaks in Advance..!
Regards,
Balaji Prasad B
Balaji - BI Developer

Hi Balaji Prasad,
According to your description, you create a state level map. When clicking on a particular state on the map, you want to display corresponding city level map.
In this scenario, we should import state and city level shapefiles into the database, then create maps with these spatial data. After that, we should click on the state map and select Polygon Properties to create a drill down report and specify state as
parameter to run the city map. For detail information, please refer to this article:
Drill down in SSRS Map Reports.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

GIS - Realize Drill Down with the Web Item "Map" (WAD)

Hi experts,
can somebodye tell me how to realize a drill down (on mouse click) on the web item map (Web Application Designer) ? To drill down in a map from a country to a region for example. I need the function "filter and change drill down" on mouse click.
Thank you.
Junkovic, Daniel

Hey,
I am just copying your answer, you gave in another thread, to limit the search time for other users:
italics What worked was another possible way, e.g. to maintain the SAPBWKEY in the Arcview software delivered by ESRI. Using the Arcmap -application.
-Rightclick on the respective layer, then 'Open Attribute Table'
-Press Button 'Options': Add field. Name = SAPBWKEY, 'Type' depending on your characteristic
-Next Step: Editor ( a menue you need to load into ArcMap) --Start Editing
-Then again: Rightclick on the respective layer, then 'Open Attribute Table'
-Now you can maintain values for the SAPBWKEY
-Editor: Stop Editing (save changes)
Rightclick on the respective layerData-Export data
The last step exports the modified shapes files, which can then imported to your info object.italics
Greets
Marcus

How to reset drill-down column-chart based on map-chart?

Hi guys,
I'm facing pritty common issue while designing one of my dashboards. Let me describe a little bit more:
1. I have some data extracted from BW using Query as WebService into my Xcelsius spreadsheet.
2. I have map-chart - regions for some country.
3. I have a drill-down column-chart, which displays data for a selected region.
At the beginning column-chart displays results for entire country (which, in fact, is not exactly drill-down). The issue I'm fasing is, that in case I select any region and the data is drilled-down into my column-chart, I have no option to show data for the entire county in the column-chart anymore (the only one way is to restart the report).
Are there any possible way to do this, or am I doing a design error while displaying data, which is not drilled-down, into a chart which is intended to display drill-down data only?
Any help would be highly appreciated.
Thanks in advance.
Ivaylo Mutafchiev
Varna Business Services
Project Manager BOBJ

Ivaylo Mutafchiev,
I understand your problem now. So your column chart data which is coming from the QAAWS query should be having a prompt which is bound to some cell in excel. and your map might be passing the values for prompt isn't it? in your case the map might be passing a region.
All you need to do is put the prompt in the web service for region as a optional prompt. Now pull in a check box or a Push button(name it as reset or something.). while binding the data to the check box or push button (source data) bind it to a blank cell. when user clicks on it , it passes a blank vlaue to the region(this is ur input for region) which will inturn makes the prompt optional for the region web service. which should pull all the data for all the region.
The whole idea lies in somehow passing a blank cell to your web service whose region prompt is optional.
Thanks,
Karthik

Drill Down in Map Report

I've been trying to get drill down reporting working in a map report I've created an can't seem to get things to behave properly. So far, I've done everything I've read in several posts, but yet drill don still isn't functional.
Here's what I've done:
- Downloaded esri file from online and imported the spatial data in my SQL Server
- Created a map report using spatial data as a source for the map. I also have a dataset based on an Analysis Services query...Sales by State. Each figure has a corresponding state abbreviation. Below is the map report. The map report takes one parameter:
Year. The report is a color analytical map. Colors vary based on sales amount and year.
Below is the map display:
I have a second report called SalesByState that takes two parameters: State and Year.
What I would like to happen is when a user clicks on a state, they are taken directly to the report that lists detail information based on the year and the state chosen in the first map report. The year isn't getting passed to the second report nor is the
state clicked on.
When I set up the Action tab in the Polygon Properties dialog, I'm not seeing the dataset values as available as a parameter. When trying to give an expression for the state parameter, I get an error:
=First(Fields!STUSPS.Value, "SQLSpatialData") saying "Unknown Collection Member".
The STUSPS field is the state abbreviation.
Not sure what I'm missing here!
A. M. Robinson

Hi A. M. Robinson,
Please refer to the steps below:
Subreport:
Add two datasets in the report: Spatial data, ContactState.
Add a parameter in the report named SpatialData. Please refer to the following Available Values:
Dataset: Spatial data
Value field: STUSPS
Label field: STUSPS
Add a table in the report fill with specify data.
Right click the table, select Tablix Properties.
Click Visibility in the left pane. Select “Show or hide based on an expression” option, and type following expression:
=IIF(Parameters!STUSPS.Value="ID" ,False,True)
(Note: It is use parameter’s value to control the tablix visibility.)
Main report:
Based on your map design, click the PointLayer arrow in the Map Layers dialog box, select Point Properties.
Click Action in the left pane. Select “Go to report” option.
Select the specific subreport below “Specify a report”.
Click Add, please refer to these values below:
Name: SpatialData (Subreport Parameter’s name) Value: [STUSPS]
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Image map & Drill Down Reports in Apex

Hi,
I am looking to create a Image map with drill down reports. I don't know Java but know PL/SQL functions/procedures very well. I would appreciate if someone help me with this.
I am looking following functionality:
1. Upload an image in Apex
2. Create click-able areas in it.
3. User click on these hyperlinks and move to next page with drill down report as per the vaiable in hyperlinks
Wajid

Try viewing this blog entry to see how to do image maps in APEX..
http://www.danielmcghan.us/2009/05/html-image-maps-old-trick-with-new.html
Thank you,
Tony Miller
Webster, TX

OBIEE-- Google Maps With Drill Down Facility

Hi All,
I want to create a map chart ie., google maps in OBIEE with drill down facility.
This is my Hierarchy -> From country to state to city .
I have this data in my table in the database as columns.
I know to create google map but dont know how to include hierarchy, please let me know if this can be done.
Thanks in Advance

Firstly:
http://catb.org/~esr/faqs/smart-questions.html#before
Then look at:
http://obiee101.blogspot.com/2009/03/obiee-google-maps-multiple-addresses.html
http://www.artofbi.com/index.php/2009/07/obiee-and-google-maps-integration/

Drill down feature in Power map(in trial version of O365) is available?

Drill down feature in Power map(in trial version of O365) is available?
If yes for all version it is available?

I don't think so.
Please submit this feature request via the Smile Frown button in the UI.
That will go directly to the product team.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Drill down mapping in Combo chart in BAM 11g

Is it possible to enable drill down for both the report in combo chart?That means i have a combo chart of zone wise distribution of total price as bar chart and zone wise distribution of total quote as line chart.If i click on bar chart and line chart it will open another report.

Hi Anish,
There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
Regards,
Ahmet

Hide drill-down option in Discoverer Plus

Hi,
Is there anyway to hide the drill down (Analyze link) option for a graph in Discoverer Report?
Thanks,

Karthik,
We just wrote an entire article on this:
http://www.everythingxcelsius.com/2008/07/using-xcelsius-2008-map-drill-down-and.html
Hope this helps!
Xcelsius Gurus
http://www.everythingxcelsius.com
"Xcelsius Gurus share templates, tips, reviews, tricks and much more!"

Poor performance with WebI and BW hierarchy drill-down...

Hi
We are currently implementing a large HR solution with BW as backend
and WebI and Xcelcius as frontend. As part of this we are experiencing
very poor performance when doing drill-down in WebI on a BW hierarchy.
In general we are experiencing ok performance during selection of data
and traditional WebI filtering - however when using the BW hierarchy
for navigation within WebI, response times are significantly increasing.
The general solution setup are as follows:
1) Business Content version of the personnel administration
infoprovider - 0PA_C01. The Infoprovider contains 30.000 records
2) Multiprovider to act as semantic Data Mart layer in BW.
3) Bex Query to act as Data Mart Query and metadata exchange for BOE.
All key figure restrictions and calculations are done in this Data Mart
Query.
4) Traditionel BO OLAP universe 1:1 mapped to Bex Data Mart query. No
calculations etc. are done in the universe.
5) WebI report with limited objects included in the WebI query.
As we are aware that performance is an very subjective issues we have
created several case scenarios with different dataset sizes, various
filter criteria's and modeling techniques in BW.
Furthermore we have tried to apply various traditional BW performance
tuning techniques including aggregates, physical partitioning and pre-
calculation - all without any luck (pre-calculation doesn't seem to
work at all as WebI apparently isn't using the BW OLAP cache).
In general the best result we can get is with a completely stripped WebI report without any variables etc.
and a total dataset of 1000 records transferred to WebI. Even in this scenario we can't get
each navigational step (when using drill-down on Organizational Unit
hierarchy - 0ORGUNIT) to perform faster than minimum 15-20 seconds per.
navigational step.
That is each navigational step takes 15-20 seconds
with only 1000 records in the WebI cache when using drill-down on org.
unit hierachy !!.
Running the same Bex query from Bex Analyzer with a full dataset of
30.000 records on lowest level of detail returns a threshold of 1-2
seconds pr. navigational step thus eliminating that this should be a BW
modeling issue.
As our productive scenario obviously involves a far larger dataset as
well as separate data from CATS and PT infoproviders we are very
worried if we will ever be able to utilize hierarchy drill-down from
WebI ?.
The question is as such if there are any known performance issues
related to the use of BW hierarchy drill-down from WebI and if so are
there any ways to get around them ?.
As an alternative we are currently considering changing our reporting
strategy by creating several higher aggregated reports to avoid
hierarchy navigation at all. However we still need to support specific
division and their need to navigate the WebI dataset without
limitations which makes this issue critical.
Hope that you are able to help.
Thanks in advance
/Frank
Edited by: Mads Frank on Feb 1, 2010 9:41 PM

Hi Henry, thank you for your suggestions although i´m not agree with you that 20 seconds is pretty good for that navigation step. The same query executed with BEx Analyzer takes only 1-2 seconds to do the drill down.
Actions
suppress unassigned nodes in RSH1: Magic!! This was the main problem!!
tick use structure elements in RSRT: Done it.
enable query stripping in WebI: Done it.
upgrade your BW to SP09: Has the SP09 some inprovements in relation to this point ?
use more runtime query filters. : Not possible. Very simple query.
Others:
RSRT combination H-1-3-3-1 (Expand nodes/Permanent Cache BLOB)
Uncheck prelimirary Hierarchy presentation in Query. only selected.
Check "Use query drill" in webi properties.
Sorry for this mixed message but when i was answering i tryied what you suggest in relation with supress unassigned nodes and it works perfectly. This is what is cusing the bottleneck!! incredible...
Thanks a lot
J.Casas

OBIEE 11.1.1.6 Paretto Chart drill down

A Pareto chart when created using OBIEE 11.1.1.6 drills down to the incorrect hierarchial map. This was a bug with OBIEE 10g:
BUG:8769813 - DRILL DOWN IN PARETO GOES TO WRONG CHILD
NOTE:517727.1 - pareto charts
It was originally an issue with the use of Corda charts. This was supposed to be fixed with the move to OBIEE 11g but it does not seem to be so in our case, since we encounter the same error.
Original OBIEE 10g error: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?_afrLoop=738674755173621&id=1200914.1&_afrWindowMode=0&_adf.ctrl-state=k53hrt132_215
I will look around on the forum, but any insight would help

I will try and explain the sequence of occurances on an Oracle "Sample Sales Lite" analysis, in case it needs to be recreated.
It is a very simple analysis using the “Sample Sales lite” subject area provided by Oracle. The criteria is just company from within offices as the dimension and revenue from within base fact as the fact.
The typical hierarchial drill path for the “Company” dimension within offices as per the RPD definition is Company > Organization > Department > Office.
When viewed as a table this drill path works perfectly fine. When we represent the same as a Paretto chart, on clicking on “Stockplus Inc”, the output drills down to a breakdown of "Genmind Corp" instead. This is the same when viewed as an analysis and on a dashboard.
I have seen similar occurances with bubble charts as well. Do let me know.

Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Drill Down Report using Crystal reports in eclipse and jspviewer

Hi
I want to understand how to write a drill down report since I have a requirement for my project, so I tried to run the sample drill down.rpt that is available with Crystal Reports 2008 Complete Reference book by George Peck.
I can see the results correctly( i.e. can drill down) in the preview tab . Since I am working inside the eclipse, the way I run the reports is first "Create report viewer JSP" by right clicking the report and have a url mapping to this jsp. I am running the reports from a hyperlink that maps to the url which will launch the jsp.
the jsp is:-
<%@ page contentType="text/html; charset=UTF-8" pageEncoding="ISO-8859-1" %><%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %><crviewer:viewer reportSourceType="reportingComponent" viewerName="Drill Down-viewer" reportSourceVar="Drill Down" isOwnPage="true" allowDrillDown="true">
     <crviewer:report reportName="reports/Drill Down.rpt" />
</crviewer:viewer>
The one that was created by "Create report viewer JSP" did not had "allowDrillDown" attribute at all .But I added it since it isnt working.
So when I launch my web app and click on the link to run the report, I get the report results but only to the summary level. When I double click the summary level I get a 404 error page.
Can please anyone suggest what is going on.
Thanks
poonam

Ok. So, you added the report to the project. Now we have to add the CR assemblies to the project, add the viewer (if need be) and fire it off. Simplest code would be:
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        CrystalReportViewer1.ReportSource = ("path to report")
    End Sub
In this case you are using the viewer SDK to runt he report. The report will prompt for any logon parameters - but you can code these also. You can load the report via the engine as bellow. Again, the report will prompt. I prefer to use the engine as it is way more "extensible"...
Public Sub New()
        ' This call is required by the designer.
        InitializeComponent()
        ' Add any initialization after the InitializeComponent() call.
        Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        crReportDocument.Load("path to report")
        'Bind the report to the viewer
        CrystalReportViewer1.ReportSource = crReportDocument
    End Sub
If you have a report added to the project (strongly typed) the code would be:
CrystalReportViewer1.ReportSource = New myReport()
For more details, I'd recommend looking at the sample app vbnet_win_simplepreviewreport.zip available from the following location:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
The developer help files are here:
[SAP Crystal Reports .NET SDK Developer Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip]
[SAP Crystal Reports .NET API Guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_api_2010_en.zip]
- Ludek

[Extend DBI] specify the drill-down report for the custom report column

Hi,
I realized two custom reports by using the extend DBI tools:
1st report displays the sum of invoices amounts grouped by Operating Units.
2nd report display the details of invoices for all Operating Units
In the 1st report I specified a link on the column Operating Units to drill-down at 2nd report.
The problem is how specified the drill-down link so that the 2nd report display only the detail of invoices for the selected Operating Unit?
Thanks.

Adding the time dimenstions like Year, Quarter, Period, Week is quite possible.
Steps would be:
1. make sure your data source (Table/View has these columns). If you don't have them you can generate them by joining the date of the data table with FIII_TIME_DAY.
2. Map these new columns to appropriate Dimesnions. (Lile Enterprise Year, Enterprise Quarter etc.)
Once you have done these two your report will work for the Time Dimensions.
I dont think its possible to get the Prior Period functionality unless you use a generated datasource.
Regards,
Sudeep

Drill down in Geo Map

Similar Messages

Maybe you are looking for