Drill down: new page appears in chart region

I have a PL/SQL generated SVG chart with drill down to a report page.
The chart region is calling the procedure from an <embed> command.
However when drilldown is performed, the report page displays inside the chart region on the initial chart page, rather than replacing the chart page with the report page.
How can I force the drill down URL to replace the whole page rather then put the chart inside the chart region?
Thanks,
Roland

This worked for me:
select 'f?p=&APP_ID.:1:&SESSION." target="_top' link
, label
, value
from...

Similar Messages

  • Drill Down between 2 stacked column chart with multiple rows.

    Hi,
    Can anyone please help me.
    1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
    2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
    to achieve this,
    i'm using 2 stacked column charts and 1 lebel baseb menu.
    from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
    Becoz my data is multiple row for each quarter.
    please suggest me to achieve the drill down between 2 stacked column charts.
    assume that my data like below.:
    coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
    Region                Q2                Q3               Q4
    Other              3658              3497               497
    NA - North
    America                3               3               1101
    APJK     1     4     597
    UK               324
    EMEA North     1     1     288
    CORPORATE     1     5     215
    LA -
    Latin America1     2     208
    EMEA     1          199
    EMEA South     1     1     169
    Coulmns for 2nd coumn chart:  Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
    Region     Priority     Q2     Q3     Q4
    Other     D: End of Next Day     1568     1613     239
    Other     C: End of Day     983     893     119
    Other     A: 2 Hour     631     610     70
    Other     B: 4 Hour     396     318     56
    NA -
    North AmericaD: End of Next Day     2     2     514
    APJK     D: End of Next Day          3     297
    NA -
    North AmericaC: End of Day               284
    NA -
    North AmericaA: 2 Hour     1          170
    UK     D: End of Next Day               157
    APJK     C: End of Day     1     1     152
    Other     E: 3 - 5 Business Days     68     58     13
    EMEA North     D: End of Next Day          1     136
    CORPORATE     D: End of Next Day          4     107
    NA - North America     B: 4 Hour          1     104
    LA - Latin America     D: End of Next Day     1     1     86
    EMEA     D: End of Next Day               86
    UK     C: End of Day               85
    APJK     A: 2 Hour               79
    EMEA South     D: End of Next Day               72
    EMEA North     A: 2 Hour               69
    EMEA North     C: End of Day               56
    APJK     B: 4 Hour               55
    EMEA     C: End of Day     1          53
    LA - Latin America     C: End of Day               54
    UK     A: 2 Hour               49
    EMEA South     C: End of Day     1          44
    CORPORATE     A: 2 Hour          1     43
    CORPORATE     C: End of Day               44
    LA - Latin America     A: 2 Hour          1     42
    EMEA South     A: 2 Hour          1     32
    EMEA     B: 4 Hour               30
    UK     B: 4 Hour               30
    EMEA     A: 2 Hour               27
    EMEA North     B: 4 Hour     1          26
    NA -
    North AmericaE: 3 - 5 Business Days               25
    LA - Latin America     B: 4 Hour               23
    EMEA South     B: 4 Hour               20
    CORPORATE     B: 4 Hour               17
    APJK     E: 3 - 5 Business Days               13
    Other     F: 6 - 10 Business Days     6     4     
    Other     G: 11 - 20 Business Days     6     1

    Hi Srinivas,
    I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
    for mor details:
    1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
    if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
    somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
    Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

  • Xcelsius Drill Down With Column and Line Chart

    Hi Guys,
    I am working on an Xcelsius 2008 Dashboard. I would like to integrate two charts, a column and a line chart. The column chart is supposed to show the results for each quarter. With a selector it changes the view and name of the different numbers.
    Then I would like to enable the drill down so that I can see the results for the three months of the corresponding quarter in the line chart. Is that somehow possible? I am totally lost. Thanks for your help.
    Kind Regards,
    Maurice

    Hi Maurice,
    You cannot integrate a column chart and line chart to make drill down possible. You could drill down a column chart to show the values in another chart bt that would be just two different charts and not an integrated one.
    Regrads,
    Anju Saseendran

  • ADF: Can drill down feature of data visualization chart trigger a method?

    I'm using jdev 11.1.1.2.0 and I can see that charts can use a master-detail link to allow the user to click on a data element in a chart and so select the data in the detail chart. Can this feature be used in other ways?
    I'm wondering whether a click on a chart could call a method which uses the data selected in the chart. For example, a click on a marker in a scatter graph might write that data (x and y values, maybe even some of the tooltip data) into a separate table; alternatively such a click would copy such data into variables which will be combined with data selected by further clicks on the chart, eventually updating a table with calculations based on the data points selected.
    Possible?

    I'm afraid I haven't been able to work it out. The instructions on using the demo describe creating a project from a WAR file - but the download of the 11.1.1.3 version isn't a WAR file, it's a ZIP. I also tried extractng and copying the files but couldn't work out what was required - it seemed particularly odd that there wasn't a JWS file.
    Also, I'm still on 11.1.1.2: should I still be able to get most things running?

  • PerformancePoint Chart Drill Down Menu Display Issue with Chrome v40

    We have performancepoint dashboards which used to display perfectly in Chrome. The last update of Chrome (v40) has introduced the following issue:
    Whenever the user right clicks on the chart the drill down menu displays erroneously on top-left section of the page. The drill down menu should appear exactly where the user right clicks but it does not.
    Any other person faced this issue and can recommend any fix for that? We are stuck as most clients have now updated Chrome browser and tweaking Microsoft implementation will not be a good fix for long term.
    P.S. there is no such problem with FireFox (35) & IE (9+) and Chrome (v33)

    Hi guys,
    I kind of lost track on this post. I checked that for most of the components, as soon as we use some or the other methods to overwrite with blanks, the components reset wonderfully, except when using 'Drill'.
    Drill feature of a chart required me to execute the query again to reset it.
    To prevent this, have changed the requirement to provide transparent push buttons on X axis for drilling down to the next level.
    Thanks for the inputs.
    Regards,
    Velly

  • Drill Down for Multiple Series in a Line Chart

    Hello,
    I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
    I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
    The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
    i) Enable drill down.
    ii) Choose 'Row' as insertion type.
    iii) Fill out the destination field.
    iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
    When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
    Let me know if you need further information.

    This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
    1. Write the date that has been selected to a cell (for each series).
    2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
    So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
    So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
    Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
    I hope that makes sense.

  • Line Chart cannot drill down on legends and lines

    I am doing a drill down Group report which will show the Sum of Last year's Sales By Country, State and city over a period of time(by date) for throughout the year 2007. Every group will have a line chart with Data title as Sum of Last year's Sales ($), Group Title as Date and legends displaying countries (or states or cities) as USA,UK,Australia. etc.. I have same sort of line chart for State and City as well. So, I got 3 levels of groups with a line-chart displayed in every group level.
    Now, the problem is my drill down would not work on chart lines or legends as it would do for a 2-dimensional data chart like a bar-chart or pie-chart. In the Chart Expert->Data->Layout:Group ->in the On Change Of event selection I am able to specify either Sales.Country (or) Sales.country and Sales.Sales.State. Both options would not let me get the correct linechart with correct data and drill-down working as well.
    The only work-around i got is to display the line chart with legends and showing the Country(or State or City) names in a field in the Group Footer. The drilling will work on those fields, but not on the legends or lines of the line chart. This make my report showing the Country names twice once on legend (with no drill-down) and once on group-footer(with drilling ability to groups below) which is untidy.
    Have anyone tried to make a drill-down crystal report on a 3-dimensional data like this? The World Sales report in Crystal reports C:\Program...\BO\Samples\General Business\World Sales Report is the best example of how i would like to see my charts to drill down. However, they drill down across a 2-dimensional data. I am publishing this Crystal Reports in Business Objects Infoview.

    Please re-post if this is still an issue

  • Line chart will not drill down

    I am doing a drill down Group report which will show the Sum of Last year's Sales By Country, State and city over a period of time(by date) for throughout the year 2007. Every group will have a line chart with Data title as Sum of Last year's Sales ($), Group Title as Date and legends displaying countries (or states or cities) as USA,UK,Australia. etc.. I have same sort of line chart for State and City as well.
    Now, the problem is my drill down would not work on chart lines or legends as it would do for a 2-dimensional data chart like a bar-chart or pie-chart. The reason is in the Chart Expert->Data->Layout:Group ->in the On Change Of event selection I am able to specify either Sales.Country  (or) Sales.country and Sales.Sales.State. Both options would not let me get the correct linechart with correct data and drill-down working as well.
    The only work-around i got is to display the line chart with legends and and showing the Country(or State or City) names in a field in the Group Footer. The drilling will work on those fields, but not on the legends or lines of the line chart. This make my report showing the Country names twice once on legend (with no drill-down) and once on group-footer(with drilling ability to groups below) which is untidy.
    Have anyone tried to make a drill-down crystal report on a 3-dimensional data like this? The World Sales report in Crystal reports Samples\General Business\World Sales Report is the best example of how i would like to see my charts to drill down. However, they drill down across a 2-dimensional data. I am publishing this Crystal Reports in Business Objects Infoview.

    Wow. That post almost made my eyes bleed. You may want to add some white space for readability.
    Anyways - as Falk said. You should move or re-post this in the [Crystal Reports Design|SAP Crystal Reports; forum. They specialize in this sort of thing. Us dev guys here make sure we can see the chart without errors and don't do much beyond that.

  • Drill Down feature for pie chart in JSP

    Hi,
    I need to have drill down feature in my Pie Chart which is generated using JFreeChart package. The pie chart is generated dynamically basing upon the database values as inputs .
    Now on click of any one sector i have to show other bar graph. The bargraphs would be different for different sectors clicked.How to use Mouse Listener? How can track or keep check on the boundaries of different sectors?.
    Please help me on this issue.
    Thanks in advance,
    Praveen

    @OP: don't ask the same question in two different threads:
    http://forum.java.sun.com/thread.jspa?threadID=5121491&messageID=9424672#9424672
    kind regards,
    Jos

  • Drill Down in Pie Chart

    In Xeelsius 2008 when I click on the Drill Down tab of the Pie Chart then the total tab is in disable mode so unable to add the drill down property.Please suggest me how to proceed

    Hi
    For default data drill down is disabled.
    So to enable drill down, You have to pass the data, present in General tab.
    Hope this will solve your Problem.
    Regards
    Rush-me

  • Drill down mapping in Combo chart in BAM 11g

    Is it possible to enable drill down for both the report in combo chart?That means i have a combo chart of zone wise distribution of total price as bar chart and zone wise distribution of total quote as line chart.If i click on bar chart and line chart it will open another report.

    Hi Anish,
    There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
    Regards,
    Ahmet

  • MSChart drill down pie chart

    Hi,
      I need to show MSchart Pie chart drill down to show expanded pie chart for the selected pie  in C# ASP.net

    Please refer to this article: http://www.codeproject.com/Articles/65803/A-Guide-to-using-MSChart-for-NET. Perhaps it will help you get started.

  • Pivot and chart drill down

    Hi ,
    Could anyone please let me know how to drill down in pivot and related chart report .
    As because when I drill i get a table view instead of chart.
    Regards,
    Megha

    Hi,
    I believe you are trying to show chart of your pivot table as well in your pivot view. I tried and I can drill down from both chart and its pivot table.
    You need to select drill option under Interaction tab of Additional Charting Option properties of this chart. Save your report and see if drill down in pivot table and in chart in the Pivot view is working.
    Regards,
    Rituraj Kumar.

  • Chart Drill Down Data

    Hi guys,
    I am trying to create a drill down capability for a column
    chart in my application. I am using the HTTPService to get the data
    in from an external XML file, but I am having problem getting in
    the external data needed when the user selects a column. In simple
    version,
    1st level consisit of year(x axis) against amount(y axis)
    2nd level,- when user clicks the column representing a year,
    the column chart to be produced consist of Month(x-axis, i.e. Jan,
    Feb, Mar, etc) against Month count(y-axis,) for the selected
    year

    Nothing to do with excel file, just the logic with combo box.

  • Drill down for pie chart is not enabled

    hi,
    i am trying to have a drill down functionality  for a pie chart but when i go to drill down option that screen is not enabled.
    how to make drill down option enable.
    please let me know
    Edited by: venkat s on May 9, 2008 9:36 AM

    i just gave yaxis  source and x axix source . it is enabling now

Maybe you are looking for