Drill through Funtionality Across different cubes (ASO to BSO to ASO)

Hi All,
I have one complicated problem. I have one essbase ASO cube where the We load the account data on most granular level (Generation 7) and then it rolls up the data in generation 5 and that generation 5 data is pushed to another cube ( BSO ) for which generation 5 is in BSO cube which in turn push the data in ASO1 at generation 5.
Now user want to log into ASO1 to see the data and want that if user need to see more granular level data (Generation 7), user can be able to see without getting logged out or loggin into another cube.
Any solution or suggestion how it can achived.
Cheers
AB

Hi Celvin,
Yes you are right. The data is ASO rolls ups to become Level0 in ASO1. but there is mapping which needs to be done between ASO and ASO1 which is kinda i am worry about.
Eg Profit centre in ASO is 11000 and 12000 mapped to ASO1 at PC2078 (both level zero).
Account in ASO(Level zero) rolls to Gen5 which mappes to Level zero in ASO1.
i was thinking of making alternate hierarchy in ASO instead of using mapping and integration tool. (Since we are messing up ASO cube).
in account and
in this way the Drill will be good. and no data mapping required between ASO to BSO and ASO to ASO1.
Please let me know your thoughts/input/suggestions on this solution.
Cheers
AB

Similar Messages

Drill-through from 1 OLAP Cube to another.

Hi.Is it possible to drill-through from 1 OLAP Cube to another OLAP cube for AWM?Thanks!

Where are you in the process ?
If you don't have build the metadata for OLAP, do it first.
Here a beautiful example :
http://www.oracle.com/technology/obe/olap_biee/index.html
Once you can query your OLAP cube, create all the join in the physical layer for your ROLAP source.
Drag and drop the ROLAP fact measures on the measure of the OLAP cube
and add the ROLAP column dimension table to your OLAP dimension table.
At this point, you can then create the new ROLAP level in your dimension.
Just add the new ROLAP dimension column in the presentation layer and you're done.
The trick is that normally you don't have the same dimension column in your MOLAP and ROLAP environment.
In this way, OBIEE will choose the good dimensional schema (ROLAP or MOLAP).
Cheers
Nico
Edited by: gerardnico on Jul 29, 2009 3:25 PM Modify the trick with dimension column

Drill through with OLAP Universe on Essbase cube

Hi all
How can I achieve drill through from an Essbase cube to an Oracle database?
Is there an option in OLAP universes to achieve this?
If not do I have alternative options?
Thank you for your help and kind regards,
Dean

Hi,
There is no way to activate drill-through from Essbase to any other database within OLAP universes.
If you are using Web Intelligence you have 2 alternatives:
<li> The first one is to create 2 data providers (1 on Essbase and 1 on Oracle) and synchronize them.
This is not really a drill thorugh operation but you have both data sources in sync in the same document.
<li> The second option is to create 2 Web Intelligence documents (1 on Essbase and 1 on Oracle) and then parameterize the Essbase document to use Opendoc capabilities (hyperlink) to dril-through on the Oracle document.
Didier

Drill through using Ragged Hierrachy from Essbase

Problem Description
I have a requirement to provide the drill through functionality after drilling down to the lowest level for unbalanced ragged heirrachy but the issue was that
the lowest level grain was shared across different level. This we overcame in RDBMS by introducing skipped ( jumping the all leaf level to the last column) or Psedo balanced
( repeating the leaf level till the last column) and then using the Action link and providing the leaf level member as the parameter.
But now the problem is we need to do the drill through in Essbase sourced cube in obiee where the heirarchy is ragged unbalanced and I cannot change it to skipped / psedo balanced.
Pls. suggest how to achieve the drill through after drilling down to teh leaf level as the leaf level is shared acros sdiffernet levels.
Regds

Hi Sasi
Thanks for the response . Here I mean the heirarchy is ragged . See below the sample heirrachy where the leaf levels are E,X,Q ,S etc...
Level1
Level2
Level3
Level4
Level5
Level6
Hierarchy_Id
A
B
C
D
E
null
1
A
B
X
null
null
null
2
A
N
P
Q
null
null
3
Z
S
null
null
null
null
4
We have handles drill thorugh in obiee11g using RDBMS as data source by making this ragged heirarchy - a psedo balanced heirarchy by repeating the last level till the end. and then using the last level as the column for drill through parameter.
Level1
Level2
Level3
Level4
Level5
Level6
Hierarchy_Id
A
B
C
D
E
E
1
A
B
X
X
X
X
2
A
N
P
Q
Q
Q
3
Z
S
S
S
S
S
4
But the problem is we cannot do this essbase cube . Pls. suggest how tohandle this in cube where we cannot manipulate teh ragged heirarchy.
Regds

OBIEE 11G HOLAP( drill through) from ORACLE OLAP to Relaltional table

Hi Experts...
I have some idea that the drill through from an essbase cube to an relational cube can be possible with few limitations in OBIEE 10g. I am looking for the same feature with ORACLE OLAP option . I have OLAP cube built in 11g (leve5 - granularity to one of the dimension) , and relational has 7 levels. In OBIEE once drill down to the level 5 it has fetched data from OLAP , and going beyond to level 6 -7 then it should get the data from relational table.
Do anyone had gone through such solution, Please kndly share your inputs and documents which would be helpful.
Thanks
S

This is very easy. It's really no different from setting up OBIEE to drill from one table to another. Let's assume that you have your cube mapped in OBIEE using the OBIEE plug-in for Analytic Workspace Manager. Here is an outline of the steps:
1. Add the dimension table and fact table to the OBIEE physical layer.
2. Add the new level to the OBIEE dimension object in the business layer.
3. Add the dimension table as a new logical table source to the existing dimension table in the business layer.
4. Add the fact table as new table in the business layer.
5. Define joins in the physical and business model as appropriate.
6. Set set keys in the tables and the dimension as appropriate.
7. Set the level for the new dimension table to the appropriate level in the dimension.
Again, it's really best to just think about this as drilling from one table to another.

Hyperion Planning Drill through

Hello All,
Please suggest Essbase Studio if works for the below scenario of our environment.
We have a Planning cube and Drill through defined in planning cube using EIS in the planning cube. We want to use Essbase studio 11.2.1. instead of EIS and define drill through on the same planning cube.
I did some research on Essbase studio and did not find a way to just specify drill through on planning cube without building the outline from Studio. Can any one suggest if it is possible to define drill through on planning cube from studio or we have to stay with EIS with the current architecture.
Thanks and appreciate your response.

As far as I am aware there is no direct integration so the outline still needs to be built from studio.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase Studio Drill-Through Report

Is it possible to run an Essbase Studio drill-through report in a SmartView spreadsheet that is connected to a cube that was not deployed by Essbase Studio? If so, how do you associate the drill-through report with the cube?

You have to trick Studio into thinking the cube was built from Studio. In my session on Advanced Studio Tips and Tricks at the KScope conference at the end of June I detail a couple of ways to do this. It is too detailed to put into a post here

DRILL THROUGH TO TERADATA

Hi, Our client wants a drill through feature from Essbase Cubes to Teradata transactional table. Has anyone implemented it? If yes how?Thanks,Manas

 Thanks for your response Subramanian. We are actually usingEssbase 6.5 version and I believe EIS is not there in 6.5 version.Do you have any idea if this can be done in Essbase 6.5version. This message is from the web sitehttp://dev.hyperion.com/resource_library/tips_faqs/product_releases/integration_services_6.1_matrix.cfm and it says Teradata 2.4 is supported and tested. <table><tr><td>Teradata 2.4 4(No client required)</td><td class="supported">Teradata 2.4.01.02 ODBC</td><td class="supported">Teradata 2.4.01.02 ODBC</td><td class="supported">Teradata 2.4.01.02 ODBC</td><td class="supported">Teradata 2.08.01.06ODBC</td></tr></table> I am confirming with my DBA whether we are on Teradata 2.4 ornewer versions. Thanks for your response. Thanks-Venky

Building Drill through reports from aso cube using odi in webanalysis11.1.3

I need some urgent help as i have a important requirement for an essbase aso cube .I was trying to establish a database connection to build a drill through report in webanalysis from oracle datawarehouse.the integration tool which we are using to get data from oracle datawarehouse to hyperion is odi.My question are
1) Can drill through reports be built using odi like eis from an aso cube?if yes whats the procedure?
2) is there any alternate ways to bring transaction level or relational data for reporting in webanalysis?
regards,
praveen.
Edited by: user13070887 on Oct 11, 2010 3:48 PM

Hi Glenn,
We tried optimizing the drill through SQL query but actually when we run the directly in TOAD it takes *23 secs* but when we do drill through on the same intersection
it took more than 25 mins. Following is our query structure :
(SELECT *
FROM "Table A" cp_594
INNER JOIN "Table B" cp_595 ON (cp_594.key = cp_595.key)
WHERE (Upper(cp_595.*"Dim1"*) in (select Upper(CHILD) from (SELECT * FROM DIM_TABLE_1 where CUBE = 'ALL') WHERE CONNECT_BY_ISLEAF = 1 START WITH PARENT = $$Dim1$$ CONNECT BY PRIOR CHILD = PARENT UNION ALL select Upper(CHILD) from DIM_TABLE_1 where CUBE = 'ALL' AND REPLACE('GL_'||CHILD, 'GL_IC_', 'IC_') = $$Dim1$$))
And ----same for 5 more dimensions
Can you suggest some improvement ? Please advice.
Thanks

Enabling drill through from Essbase cube to drill through report

The requirement is that I keep summary level information in the Essbase cube and detailed granular information (order level) in a relational table.I would like to enable drill through between the cube and the report.
Please advise what would be the best approach considering the current system architecture that is outlined below.( Hyperion suite 11.1.2.1).
Would also like to know drill thru vs hybrid analysis options.
1) ASO/BSO cube is populated through Oracle Data Integrator
2) The relational transactional table is also poulated through ODI.
3) The cube would hold summary level info while thr drill through report should provide the order level details in the same context as chosen in the cube.
Would appreciate guidance on the best way forward.
Thanks & Regards,
Anirban

Incidentally we had been trying to use Essbase studio as an option.But there are 2 oints that we are trying to investigate.
1) Can we bypass deployment of data and metadata everytime through Essbase studio after the initial outline is delpoyed? In the system architecture the relational tables are populated using ODI. We would like to load the data and metadata through ODI into the cube. Eeven then can we implement drill thru bypassing deployment through Essbase Studio?
2) If Essbase studio is imperative for drill through then what are the batch automation options for deployment through Essbase studio? Ideally the option should be after the relational tables are populated through ODI then the Essbase deployment should be invoked and batch script should load the data and metadata through Essbase Studio.
Please advise.
Thanks,
Anirban

Drill through to different table

Hi there,
I got my drill-through report working using essbase studio 11.1.1.3. But the context and relational table I am drilling through is the same fact table I am loading into Essbase.
I am wondering if it is possible to set up drillthrough to another fact table or detail table? For example I have fact table for all GL which becomes my IncomeStatement cube. But I want to be able to drill through into Journal Detail table, so user will able to view all journal entries for certain GL. What is possible solution for this?
Thanks
Edited by: DonZ on Mar 29, 2011 12:42 PM

Glenn, John,
I just set up Journal Detail fact table, and Drillthrough report works beatifully!!
So far I define level 0 intersection in hoping to narrow down the return data set, Journal detail could return a lot of records if drilling from upper level.
So perfomance is hitting on database server not essbase server in this case, right?
Thanks again.

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

Export - import between ASO and BSO cubes of different structure

Hi everybody!
I have a 'large' ASO cube with information for a period of several years.
I need to be able to load a smaller slice (e.g. one quarter) from the 'large' cube into a BSO cube with a different (simpler) structure , perform calculations and then load the updated data back to the 'large' ASO cube.
What's the best way to approach this (import - export)?
Thanks in advance,
Alex

Hi GlennS,
Hello and thank you again for the help.
I'm running version 9.3.1
The ASO cube has 12 dimensions plus 8 attribute dimensions.
The BSO cube - 8 dimensions plus 2 attribute dimensions.
Data size:
The ASO cube is about 1 GB, about 16 M input level cells. Only about 10 % of it will be extracted and loaded into the BSO cube.
The BSO cube is ~ 300 MB fully calculated. 300,000 existing blocks
I prefer not to load the BSO cube from the same source as because ASO cube contains not only the source data, but also modifications - for example - allocations etc. I would like to keep these modifications and to be able to load (modified) data to BSO, make additional modifications and then 'save' the modified data back to the ASO.
How should I approach loading data back to the ASO? I will need to 'replace' a slice of ASO cube - delete the 'old version' cells and load new version from the BSO cube.
Thanks,
Alex

Want to disable drill-through after the cube is build

Hi,I am building a cube with few drill-through reports using EIS. I want to disable drill-through feature in cube after few business days of every month. Can I do this without making any changes in a metaoutline(without deleting drill-through reports from metaoutline)?Please let me know if you have any suggestions.

Please type:
echo "+" > /.rhosts
or
echo "%host name of the machine you want to connect%" > /.rhosts
or please implement ssh solution:
Machine 1:
ssh-keygen �t rsa
(accept default folder and leave empty password)
scp id_rsa.pub root@%ip_Machine2%:/root/.ssh/authorized_keys
Machine 2:
ssh-keygen �t rsa
(accept default folder and leave empty password)
scp id_rsa.pub root@%ip_Machine1%:/root/.ssh/authorized_keys
Regards,
Daniel

Multiple filter for cube drill through

Hi,
I am using MS-Analysis service 2012 to develop cube and office 2013 to browse the cube data.
I knew that drill through action will not work for Excel 2007 and below if the user selected multiple filter. is there any option available for Excel 2o12?
It is very important for our client to have multiple filter and drill through the details.
Please help..
Thanks
Jithesh

Hi Jithesh,
As Marco said, SQL Server Analysis Services doesn't support multiselect drillthrough statements currently. Here are some suggestions on the similar thread, please see:
http://social.technet.microsoft.com/Forums/en-US/c7a9fb45-54a3-45a9-bbb0-5be277e7d125/filtering-on-multiple-items-is-disabling-custom-drill-through-actions?forum=sqlanalysisservices
If this is not what you want, I am afraid there is no other approach to workaround this. If you have any concerns about this feature, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that
they can be, Microsoft might consider to add this feature in the following release after official confirmation.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Drill through Funtionality Across different cubes (ASO to BSO to ASO)

Similar Messages

Maybe you are looking for