Drill through reports not working

Hi All,
I am trying the drill through functionality in a report which is pretty straight forward, I am using a parent report and in it I am using one of the text boxes to drill down to another report by passing its parameter to the child report, Both the parent
and the child report are in the same project only. But I am getting an issue while clicking on the text box in the parent report to drill down to the child report saying
"An Error occurred during local report processing
Error in the application
Could not find the file <Child File Location>" (Verified the Child file location which is in fact correct)
Please help me out guys !!
Thanks,
Prakazz

Hi ImPrakazz,
According to the error message, I think the child file may has been deleted while the cache file of the child file has not been deleted.
Based on my thought, I test the issue and cannot produce it completely. In my test, I design a drillthough report, and the parent report and child report are located in the same project. When I delete the child file, the parent report can run while there
is an error which shows "Could not find the child file". If I only deploy the parent report to report server, it will show the error which looks like "ReportItem cannot be found".
In this case, you can check whether the child file exists on the corresoding path. If the issue persists, please post the details, for example: report in Native mode or sharepoint mode, the edition of SQL Server Reporting Sevices and so on.
Thanks for your understanding.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Similar Messages

Drill Through report not working for large data

Hi,
In SSRS 2008 R2, I have a main report and a drill through report from one of the main report's column. The drill through report works mostly except if the data is too large i.e. more than 1 million records. How to fix this problem?
Thanks,
Jkrishna

Nope. WHat I meant was not to show the entire data in child report (ie your 1 million records). Instead add extra parameter as PageNumber. By default set it as 1 when you navigate to child report (default value)
Then in query behind use a ROW_NUMBER based logic like below
SELECT *
FROM
SELEC ROW_NUMBER() OVER (ORDER BY <combination of unique valued column(s)>) AS Rn,...
Your existing query other columns
)t
WHERE Rn BETWEEN ((@PageNo-1) * 1000) + 1 AND @PageNo * 1000
Assuming you want 1000 per page
So when it renders it will show first 1000 records. Add a NextPage icon to report footer and when clicked add a jump to report functionality to same report but with PageNumber parameter value as
=Parameters!PageNumber.Value + 1
and it will then give you second page data etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

Drill Through does not work if clicked from email attachment

Hello,
Drill through when clicked from the report attached in the email, takes me to the home folder in the Report Server. That's the <URL Root> setup in the Reporting Services. I checked the solutions, but those don't work for me. One of them said to use
'Go To URL' in the 'Action' property of the text box, but JavaScript is not recognized when I tried to enter '="javascript:void(window.open('http://.........." Please help.
Thanks,
jkrish

Hi jkrish,
Based on your description, are experiencing the issue when you click in the report which will link you to the home folder of the Report Server and the report was attached to an email, You adding the URL like this: ="javascript:void(window.open('http://..........”)"
which doesn’t work in the email’s report, right?
I have tested on my local environment and can reproduce your problem in the email’s report, but it is fine in the report server ,the problem due to the JavaScript protocol can work only with an exact page. So, when you try to open an blank page to enter
the URL it will not work.
You can find more details steps to check the issue:
Open a blank Internet Explorer, type the following URL in the address box:
javascript:void(window.open('http://www.microsoft.com', '_blank'))
The URL can’t work fine.
Open a page such as :www.microsoft.com, and then replace the URL with the following URL:
javascript:void(window.open('http://www.microsoft.com', '_blank')
At this time, the Internet Explorer will open the home page of Microsoft.com in a new window. It means we can use the URL in Reporting Service well but can’t work in the email attached report.
If your SQL Server version is 2008 R2 or Higher you can Using this expressions in the “GO To URL”:
Expression: =IIF(Globals!RenderFormat.IsInteractive = true, "javascript:void(window.open('http://www.microsoft.com', '_blank'))", "http://www.microsoft.com")
This mean if you run the report in Report Server and click the link, you will open the URL using : "javascript:void(window.open('http://www.microsoft.com', '_blank'))",otherwise it will using this URL: "http://www.microsoft.com")
If the version is lower than 2008 R2 and will not support the “RenderFormat.IsInteractive = ”, you can add directly the URL (Example:=”Http://<ServerName>/ReportServer” ) in the “Go To URL” to make it work fine in the email attached report.
Similar thread for your reference:
SSRS 2005 Jump to URL javascript:void window.open fails in
Excel 2003
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Return button on drill down report not working

We have a Action Link on report 1, when a user clicks on it it will open a new window and shows report 2, by default there is return button on report 2, When i hit return button on report 2 its taking me to report 1 on new window, We want it to go to report 1 in main window
Is this a bug by the way we are on 11.1.1.6.7 ? Is there any work around available for this ?
Thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

Enable/Disable Drill-Through Reporting?

Hi,
We have a BSO app which has Drill-through reports (defined in EIS).
Reports are working fine.
Is there a way to disable/enable drill-through reporting on an App/DB using MAXL?
Appreciate your thoughts.
Thanks,
Ethan.

Glenn,
Thank You for the response.
I am not exactly able to understand how this whole drill-through reporting concept works technically.
We define meta-outlines in EIS. Define Drill-through reports for Meta-outlines.
We build the cubes in Essbase using the EIS Meta-outlines.
Drill-through reports are available for these cubes from excel Add-in.
I am clear till now, now starts my confusion...........
I assume there will be a connection to EIS whenever user does a drill-through through Excel Add-in.
When I rename the Application in Essbase, I see drill-through reports are still available.
Are there any files/artifacts (like filters or scripts) on the Essbase app that correspond to drill-through reports?
Is there a way to tell if the app is created using EIS or not, just by looking at the app in EAS?
I believe I am asking the complete concept :).
Appreciate your response.
Thanks,
Ethan.

Drill through reports are not working fine in share point server

I Have a master report with four parameters and child report with two parameters
I deployed these two reports in share point server , my scenario is i am navigating from my parent report to child report using action (Drill Through Report Concept)
First i clicked on parent report it will ask select parameters , i have selected all parameter and click on apply in share point it will display the parent report content .
In parent report i have link to navigate child report . if i click the link it will redirect to child report and displays the child report content perfectly. upto this step every thing working fine now problem is comes to picture
I have back to in my child report when i click the that button it redirects from child to parent
But earlier selected parameters values are lossed and the parent report again asked for me to select parameters
Can you please explain me because we have migratiojn from ssrs report manager to share point .

Hi All,
Finally i got the solution there is small difference between SSRS Native mode and share point integrated mode
To overcome this issue explicitly we have to change our report expression code for SharePoint Integration mode before deployment. We have to change URL
Preparation code in the expression in report.
Below is the sample URL
="http://<<site url>>/ReportServer/RSViewerPage.aspx?rv:RelativeReportUrl"+"=/ssrs/INT/Report.rdl&rp:parameter1="+CStr(Parameters!parameter1.Value)+"&rp:parameter2="+CStr(Parameters!parameter2.Value)+"&rc:Parameters=True"
The only difference between our SSRS Report manager report expression and share point integrated mode report expression is
“rp:”
value prefixed with every parameter.
After fixing this code I am able to see the previously selected values in Parent report below are the screen shots

Passing multi value parameter to the Drill through report

Hi
I have two reports say Report A and Report B.
Both reports using same parameters.
I am Navigating from Report A to Report B using Jump to Report option.
Now when I pass multiple parameter to the Report B it only displays first parameter results.
In report B I have parameter multi value select to true.
I would like to know if its possible or not to pass multi value parameter in drill through report?
I would appreciate if someone can help me here.
Regards
Amit

Yes you can pass multi value parameters to a drill through report.
It works similar to multi value parameters for subreports, which is discussed in detail in this thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=163803&SiteID=1
-- Robert

How to display the drill through report in a new browser seperate window

Hello All,
I am working on a drill through report which should run when I select the column value from the main report. The drill through report I am working on is Centerline Validate Angles for a specific line. It has 2 parameters, Pods ID and Angle. Main report supplies
these 2 values. Right now, I am having an issue in displaying the drill through report in a seperate window. I have selected Go To URL option from the text box properties in main report and gave the expression as
="javascript:void(window.open('http://vmaidbdev1/Reportserver?%2fADN2%2fPipeline%2fCenterline+Validate+Angles+For+Specifi+Line&rs%3aCommand=Render&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
This is not working. The field in the main report is clickable but when I click it is throwing me error as Reporting services error. Could any one let me know if there is any error in the above expression or anything I need to add or correct.
Please help. Thanks so much.

Hi srisql,
Sorry for the delay in getting back to you.
After double-check the URL which I posted, I find that I have made some error in it. As you can see, there are some spaces in the URL. So please try the following expressions to check the issue again.
Angle parameter is a multi-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="& Fields!LINE_ID.Value &"&Angle="
&Join(Parameters!Angle.Value,"& Angle =") &"','_blank'))"
Angle parameter is a single-value parameter:
="javascript:void(window.open('http://vmaidbdev1/reportserver?/Adn2/Pipeline/Centerline Validate Angles for a specific line&PODS_ID="&Fields!LINE_ID.Value &"&Angle="&Parameters!Angle.Value
&"','_blank'))"
The following general URL is for your reference:
="javascript:void(window.open('http://server_name/reportserver?/folder/ folder/report_name&parameter_name="&Fields!field_name.Value &"&parameter_name="&Parameters!parameter_name.Value
&"','_blank'))"
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

Drill through report with parameters that user can change

Hi Team,
Need to provide user the ability to select the parameters in drill through report.
But even after changing parameters to different values and click view reports.Its getting reset to the parameter that being passed from main report.
Is there any way we can override these parameter values in drill through reports so that It can also work as normal report.
Thanks!

The user is interfacing with the main report so add the needed subreport parameters to both reports. In the main report, select the subreport > properties > Parameters. add the subreport parameters and set the value to the same parameter in the main
report by clicking expression builder (fx) and selecting the appropriate parameter.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

EIS Drill through reports should be disabled at #MISSING data cell

Hi,
I have working on Oracle Essbase Integration server(EIS) 11.1.1.3. I have developed the 2 drill-through reports.
Every thing is working fine. Using smart view, users are able to access the drill-through report.
As an another requirement, if there is no data(#MISSING) for any member combination in Essbase, Drill through report should not be enabled for this combination in smartview at retrieve.
How can I handle this requirement? In OLAP Intersection levels, only dimensions’slevel/generation can be specified.
Please help me on this. It is very urgent for us. Quick help will be highly appreciated.
Thanks & Regards,
Mohit Jain

Hi Gary,
I think its the latter. I've been asked on more thant one project to code things that prevent users from doing things that otherwise wouldn't make sense to do. Within the last year I was actually asked to configure things "as if I was providing functionality for 2 ^nd^ graders". At least, based on experience, this is how I relate to the OP's request.
I agree, its absolutely silly (and frustrating ) that users would try to drill through on a #missing cell and not see anything. What's worse, depending on where the drill through goes, and how its set up, users might drill on #Missing and actually see data! Yikes! Now in an experiential sense, the users can expect to see data where data ought not be.
So sometimes its just easier to just remove the button altogether than to have to explain when and why it can be used, and why when it's not used that way it did what it did. And users being part of the driver behind project requirements, don't want to hear "because you're not supposed to".
Hopefully the OP will clarify and we can provide what s/he's looking for.
regards,
Robb Salzmann

EIS Drill Through Reports

Hi,
Working with Drill Through reports on essbase 9.3.1. I have defined 10 drill thru reports in EIS because of mulitple hierarchies in some dimensions that needed to be specified. I created 1 from scratch and then copied it and modified OLAP intersections as needed, typically it was just 1 dimension that I needed to delete and re-add using a different child.
Some simple drill thru retrievals are working just fine, while others are causing me to receive an error...
{ESSNET MESSAGE} Network error [10054]: Cannot Send Data
Why would some report retrievals work, and others get this message?
Any ideas?
TIA,
Robert

Not a problem.. http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Remember, you have to reboot the machine(s) where you make changes for them to take effect.. If your EIS server is also Windows (and on a different server), do the same thing there.
We see this issue all the time with the Outline Extractor as it makes many, many requests to the Essbase server (and each one uses a port that is not released by Windows for some time).. In fact, I am currently writing some new caching functionality into our Dodeca-Essbase server and am putting a configurable delay into the code so the code doesn't call the server too quickly (but, of course, this is something that runs in the background, so performance isn't a huge issue in that case)..
Let us know if it fixes your issue.
Tim Tow
Applied OLAP, Inc

EIS drill through reports in Analyzer

I'm having trouble pulling SQL drill through reports defined in EIS when using Analyzer. I can pull the report when I'm in Excel, but when I go into Analyzer and double click, I get the related content box to open, but no links to the drill through report. I did some searching on the Hyperion support site and found an entry in the knowledge base that said the Grid API option had to be turned on for this functionality to work. Of course there was no mention of how to turn the Grid API on and I have not been successful in finding anything in the install guide or the admin guide. I'm using Essbase 7.1.5 with EIS 7.1.2 and Analyzer 7.2.5. Is anyone using Analyzer to successfully pull EIS drill through reports? Did you have to turn on the Grid API option? How is this feature turned on? Or, any other suggestions? TIA

Hi, I am also facing few issues related to AIS: I am unable to use Drill Through (1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck (2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further Can anybody help me?

Problem with EIS drill through reporting

Hello, Please help me with this. We are using Drill Through reports with EIS 7.1 and Essbase 7.1 in AIX environment. (These are the IBMDB2 Olap versions, not directly from Hyperion.) For some reports when retrieved on a member with more number of children, the Integration server gets killed and we get the following error ESSDTU {ESSNET MESSAGE} Network error [10054]: Cannot Send Data Following is the information in the server log file: [Thu Jul 13 4:39:04 PM 2006] /IS/Listener/0/Informational/1051001/Build-EIS71B168 Received client request Login [Thu Jul 13 4:39:04 PM 2006] /IS/Coordinator/0/Informational/0/Build-EIS71B168 Executed client request 'Login' in 0 seconds [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Initialization completed, 'Worker' service is online. [Thu Jul 13 4:39:04 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report [Thu Jul 13 4:39:04 PM 2006] /IS//0x0/1152826749/Informational/0/Build-EIS71B168 Successfully loaded the OLAP Model 'OM1' [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051034/Build-EIS71B168 EssbaseAPI: Logging in user [User1] [Thu Jul 13 4:39:05 PM 2006] /IS//0x0/0/Informational/1051035/Build-EIS71B168 EssbaseAPI: Last login on Thursday, July 13, 2006 4:24:33 PM [Thu Jul 13 4:39:06 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report' in 2 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report attributes [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Executed client request 'Get Drill-Through report attributes' in 0 seconds [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Received client request Get Drill-Through report data [Thu Jul 13 4:39:07 PM 2006] /IS/Worker/1152826749/Informational/0/Build-EIS71B168 Drill Through Report for Essbase Server:Server1.corp.com Application<img src="i/expressions/face-icon-small-happy.gif" border="0">T1 DB<img src="i/expressions/face-icon-small-happy.gif" border="0">B1 User:User1 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Unknown flag [JDBC DSN] found, ignoring it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Found Q command line parameter and a value of 128 is set to it/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, server home, to 'c:\ibm\db2olap\is'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, temporary directory, to 'C:\DOCUME~1\malkar\LOCALS~1\Temp'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, log file name, to 'c:\ibm\db2olap\is\log\olapisvr.log'/Build-EIS71B168 [Thu Jul 13 16:39:16 2006] /IS/Server///Informational/0 Setting configuration variable, Essbase message database, to 'C:\ibm\db2olap\bin\essbase.mdb'/Build-EIS71B168 [Thu Jul 13 16:39:17 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. [Thu Jul 13 16:39:28 2006] /IS/Coordinator/0/Critical/2002003/Build-EIS71B168 Invalid session identifier, please log in to Essbase Integration Services Server again. Please let me know if this is something to do with the EIS limitations or some setting Thanks Kris

Normally if the drill through report fetches a wrong combination of members or huge amount of members than the way it was designed in the Drill through Report template. The database may fail due to improper query. Check the database and table status. Also fetch the report with proper combination of members.

Drill through reports not working

Similar Messages

Maybe you are looking for