Driver alias changes during installation of Solaris

I have a HP LP1000r Netserver. It's a little 1u box with a hardware pci raid controller that is giving me some grief.
The card is a HP NetRaid-1M. This card is bascially an OEM version of the AMI MegaRaid 475(Express 500). AMI's raid cards were bought out by LSI who doesn't have Solaris drivers for this card.
There is a LSI MegaRaid driver disk for download from Sun but that seem to be just for new MegaRaid cards. Solaris has a AMI MegaRaid driver, "amr". Looking at the driver alias for the latest Solaris 10 x86 release the driver_alias does not contain the pci ids for my card.
The Solaris amr driver seems to be a port of the FreeBSD amr driver (http://blogs.sun.com/roller/page/JoeyGuo?entry=hello_there_welcome_here). The FreeBSD driver lists support for "AMI MegaRAID Express 500 (Series 475)".
So is there any way for me to tell the Solaris installation that my card should use the amr driver? I need to install to hard drives connected to this card.
Would support for this card have been stripped when it was ported from FreeBSD?
Thanks,
-Matt H.

I've installed FreeBSD on the system to verify that the HP NetRAID-1M is supported by the original amr driver, and it is.
At the grub menu I've tried to modify the kernel parameters when launching the install to:
kernel /boot/multiboot kernel/unix -B install_media=cdrom,"target-driver-for-pci103c,60e7"=amr
I've also tried sd instead of amr. The quotes are because of the comma in the key name. I'm kinda guessing on the quote usage based on the info at the end of http://docs.sun.com/app/docs/doc/819-2379/6n4m1vldu?a=view.
I came across http://forum.sun.com/jive/thread.jspa?forumID=291&threadID=89269 which sounds like it might work for me but building an install server just to modify a driver alias for a single machine is just a little much.
If there is no way to just make Solaris see the card correctly during install, is there some way to make a driver disk that just adds extra alias and what ever else is need to make the existing driver work?

Similar Messages

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hard Drive not detected during installation

Hello everyone,
I am brand new to this Mac Forum, and I am hoping you can assist a colleague of mine who has a Hardware issue with his Mac.
It is a Power Mac G4 and one day he started having issues booting into the MacOS, but after several re-boots it would be okay, and then it didn't want to know at all, so he asked me to take a look at it.
My knowledge of Mac's is fairly basic, but I am familiarish with the Hardware, so I tried installing the Drive on another I.D.E. Cable and channel, re-seated the Memory, but it made no difference. So I assumed it was a dead Hard Drive?
However, he purchased a 120Gb WD (previous one being an 80Gb I.B.M.Deskstar), and I went around to his office to install it - same problem?!
Basically the installation gets as far as agreeing to the Licence Agreement, then we get the dialogue box where you select the destination for the Hard Drive, but there's nothing in there.
My guess is a faulty Motherboard, yet the CD Drive is still detected, obviously, for the boot to take place from the installation disk!?
Is there any BIOS I can access to make sure the Mac is detecting the Hard Drive properly?
Please help if you can, it would be much appreciated.
Cheers,
Nathan.

Hello again,
Thanks very much for your replies.
My colleague would be very reluctant to purchase a Controller Card for his Mac, particularly whilst I still have strong suspicious about the Motherboard.
I did follow the link in Rodney Cullings reply, but that isn't quite the issue.
It is a brand new Hard Drive, purchased from Jigsaw, and therefore I would assume unformattted; however we cannot use the Disk Utility to format it because there is no Hard Drive detected in the "Select a destination drive" in the first place!
Hence my question about the B.I.O.S., because in a situation like this on a P.C., the first thing I'd do (if Windows hadn't detected the Hard Drive) is check the B.I.O.S., because if it isn't in there, it's either Jumpers - which I've already tried - or a dead Hard Drive.
I have installed the newer drive in a P.C., and the B.I.O.S. did actually detect it.
So, any other ideas please people?
Many thanks for those supplied so far.
Nathan.
P.S. Am I posting this to the correct Forum?

System hang during installation of Solaris 10

Dear all,
Solaris 10 x86 6/06 installation on Magic-Pro MP-P6PE-1000
mainboard.
I have tried on PC and VMware 5.5.1, but fail the installation.
Moreover, I have tried append "-kd" at "kernal ...cdrom" in GRUB edit mode, and then boot the system.
type "use_mp/W 0 :c"
But it still hang at:
SunOS Release 5.10 Version Generic_118855-14 32-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
or
configuring devices
hang!!
I've also try disable/enable ACPI, but no success.
Have any ideas?
Thanks!

Try to boot the kernel with the "-v" option, any maybe even set
"moddebug to 80000000", so that we can get a better idea
where it is hanging.
Check the following web page for details:
http://blogs.sun.com/roller/page/dmick?entry=diagnosing_kernel_hangs_panics_with

Hard drive not identified during Installation. Disk Utility showing nothing in left side bar

Some day before my Macbook pro shown the flashing question mark. I have tried to install thr OS Snow leopard using disc.
When I started to install the OS, my start up disc ( Hard drive) is not showing for installation.
I have gone through the Disk Utility to repair it, but in that Hard drive is not showing in left side bar.
Kindly suggest how can I recover my Hard drive to install the OS?

That suggests that the drive is dead; if so, it needs to be replaced, and any data on it can only be recovered by a professional service, which can charge hundreds or thousands of dollars.
(101654)

How do I get iTunes to recognize my external, wireless-networked hard drive (Western Digital) during installation and set-up of iTunes?

Hello,
I'm re-installing iTunes for Windows 7 (64-bit) due to a bug that occured with the iOS7 update. The Genius Bar recommended that I uninstall and re-install iTunes from scratch. All of my music is located on a WD external hard drive that's connected wirelessly to my PC. I didn't have this problem until the iOS update for iphone 5, v.7.0.
Any help is greatly appreciated.
Thanks!

I didn't relate this; now iTunes will not install on my PC when pointed to my external, wireless-networked hard drive. It appears that it doesn't recognize it.

Oracle9i installation in Solaris 10

hi all,
We are in the process of installation of oracle 9i on solaris 5.10. In this server already oracle Home is available and 10g oracle version is running.
NOTE: As the client software will work only on oracle 9i database, to simulate few issues we are doing so in a test server.
while installation process it is stopping in the middle saying that "There was an error during loading library: LangQueries
Stop installation of all products......
I have tried changing the ORACLE_HOME_NAME , OUI home,etc...
but we couldn't resolve this.
But we found one change
During installation,
in the directory $ORACLE_HOME/inventory/Queries21/LangQueries
it has to create a directory 1.3.6.3 ( since this is only available in the $ORACLE_INSTALLATION_DIR/disk1/stage/Queries/LangQueries/1.3.6.3)
but instead it is creating 1.3.5 in $ORACLE_HOME/inventory/Queries21/LangQueries directory.
Whether this is the real issue and how to fix this.
please help me.
Regards
Punithan

Hi;
You are trying to install notsupported product. Please use 11gR2 for your installation. You can use sperate path for your installation and be sure also you perform all prereq. Please see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

SAP ECC6.0 SR3 on Oracl 10 g solaris 10 hangs during installation!!!

Hi,
I am installting SAP ECC 6.0 SR3 with DB oracle 10g OS solaris 10 jdk version java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
H/W : T6320 Blade server
Memory : 16GB
during installation at Import ABAP phase while importing last package SAPSSEXC it hung on me there were no error logs as such nor the FS was full...
it resumed after couple of hrs..
but hung again at IMport Java Dump phase
and again no error logs...
so, my concern here is that is there any bug in SR3 or i am not able to find the error logs
the logs i check are:
import_monitor.java.log:
tail -100f import_monitor.java.log
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_16-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 27, failed 0, total 28.
Import Monitor jobs: running 1, waiting 0, completed 27, failed 0, total 28.
Loading of 'SAPVIEW' import package: OK
Import Monitor jobs: running 0, waiting 0, completed 28, failed 0, total 28.
jload.java.log>>while import java dump phase:
tail -100f jload.java.log
INFO: trying to create table CAF_RT_NUMRNG
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_NUMRNG created
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_NUMRNG loaded (0 rows)
Sep 12, 2008 12:47:46 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PERM_REL
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PERM_REL created
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PERM_REL loaded (0 rows)
Sep 12, 2008 12:47:47 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_PK_GEN
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_PK_GEN created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_PK_GEN loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SRVMODULE
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SRVMODULE created
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SRVMODULE loaded (0 rows)
Sep 12, 2008 12:47:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCCFG
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCCFG created
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCCFG loaded (0 rows)
Sep 12, 2008 12:47:49 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCDEF
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCDEF created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCDEF loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SVCLCK
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SVCLCK created
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SVCLCK loaded (0 rows)
Sep 12, 2008 12:47:51 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_SYSCFG
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_SYSCFG created
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_SYSCFG loaded (0 rows)
Sep 12, 2008 12:47:52 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_ATTR
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_ATTR created
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_ATTR loaded (0 rows)
Sep 12, 2008 12:47:53 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_FAILED
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_FAILED created
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_FAILED loaded (0 rows)
Sep 12, 2008 12:47:54 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_IDX
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_IDX created
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_IDX loaded (0 rows)
Sep 12, 2008 12:47:55 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TREX_LINKS
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TREX_LINKS created
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TREX_LINKS loaded (0 rows)
Sep 12, 2008 12:47:56 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCEL
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCEL created
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCEL loaded (0 rows)
Sep 12, 2008 12:47:57 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPCOT
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPCOT created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPCOT loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPELE
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPELE created
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPELE loaded (0 rows)
Sep 12, 2008 12:47:58 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMES
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMES created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: CAF_RT_TYPMES loaded (0 rows)
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_RT_TYPMMP
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
INFO: table CAF_RT_TYPMMP created
Sep 12, 2008 12:48:00 PM com.sap.inst.jload.Jload dbImport
jload.log>>while import java dump phase :
tail -100f jload.log
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_MEMBS loaded (0 rows)
12.09.08 12:48:18 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_TEXTS
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_TEXTS created
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_TEXTS loaded (0 rows)
12.09.08 12:48:19 com.sap.inst.jload.Jload dbImport
INFO: trying to create table CAF_UM_RELGR_WORDS
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: table CAF_UM_RELGR_WORDS created
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: CAF_UM_RELGR_WORDS loaded (0 rows)
12.09.08 12:48:20 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIG
12.09.08 12:48:21 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIG created
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIG loaded (9195 rows)
12.09.08 12:48:49 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_CONFIGENTRY
12.09.08 12:48:50 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: J2EE_CONFIGENTRY loaded (20235 rows)
12.09.08 13:44:02 com.sap.inst.jload.Jload dbImport
INFO: trying to create table J2EE_KEYSEQUENCE
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_KEYSEQUENCE created
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: J2EE_KEYSEQUENCE loaded (1 rows)
12.09.08 13:44:03 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_PLUG_IN_SAVES
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_PLUG_IN_SAVES created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_PLUG_IN_SAVES loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_RESULTS
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: table SP_RESULTS created
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: SP_RESULTS loaded (0 rows)
12.09.08 13:44:04 com.sap.inst.jload.Jload dbImport
INFO: trying to create table SP_STORAGE
12.09.08 13:44:05 com.sap.inst.jload.Jload dbImport
INFO: table SP_STORAGE created
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: SP_STORAGE loaded (2 rows)
12.09.08 13:44:06 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_FGUID
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_FGUID created
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_FGUID loaded (0 rows)
12.09.08 13:44:07 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_LAYERS
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_LAYERS created
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: TC_WDRR_LAYERS loaded (2 rows)
12.09.08 13:44:08 com.sap.inst.jload.Jload dbImport
INFO: trying to create table TC_WDRR_MRO_FILES
12.09.08 13:44:09 com.sap.inst.jload.Jload dbImport
INFO: table TC_WDRR_MRO_FILES created
PLEASE HELP ASAP!!!!!!
Regards,
Sohal....

Hi Ashok,
Thanks for prompt response
Yes Oracle is up....it bounced the Db once before performing Post Load activities...step
now, it resumed the installation and currently updating the DB statistics.
please chk the logs below:
tail -200f sapinst.log:
INFO 2008-09-12 14:12:05.250
Execution of the command "/oracle/RGP/102_64/bin/lsnrctl status LISTENER" finished with return code 0. Output:
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 12-SEP-2008 14:12:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=RGP.WORLD))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date                11-SEP-2008 20:28:39
Uptime                    0 days 17 hr. 43 min. 25 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /oracle/RGP/102_64/network/admin/listener.ora
Listener Log File         /oracle/RGP/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP.WORLD)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=RGP)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=FLGPPSAP01)(PORT=1527)))
Services Summary...
Service "RGP" has 1 instance(s).
Instance "RGP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
INFO 2008-09-12 14:12:13.667
Execute step createOracleStatisticsSynonyms of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:14.023
Account orargp already exists.
INFO 2008-09-12 14:12:14.033
Account 0 already exists.
INFO 2008-09-12 14:12:14.049
Account dba already exists.
INFO 2008-09-12 14:12:14.058
Account 104 already exists.
INFO 2008-09-12 14:12:14.078
Account 0 already exists.
INFO 2008-09-12 14:12:14.096
Account 105 already exists.
INFO 2008-09-12 14:12:15.836
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:15.972
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3 is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:18.817
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f crsyn -o SAPSR3" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.17
BR0833I Creating public synonyms for database log owner SAPSR3...
BR0925I Public synonym SAP_SDBAH created successfully for table SAPSR3.SDBAH
BR0925I Public synonym SAP_SDBAD created successfully for table SAPSR3.SDBAD
BR0925I Public synonym SAP_MLICHECK created successfully for table SAPSR3.MLICHECK
BR0925I Public synonym SAP_SAPLIKEY created successfully for table SAPSR3.SAPLIKEY
BR0925I Public synonym SAP_DBAML created successfully for table SAPSR3.DBAML
BR0925I Public synonym SAP_DBARCL created successfully for table SAPSR3.DBARCL
BR0925I Public synonym SAP_DBAFID created successfully for table SAPSR3.DBAFID
BR0925I Public synonym SAP_DBAEXTL created successfully for table SAPSR3.DBAEXTL
BR0925I Public synonym SAP_DBAREOL created successfully for table SAPSR3.DBAREOL
BR0925I Public synonym SAP_DBABARL created successfully for table SAPSR3.DBABARL
BR0925I Public synonym SAP_DBADFL created successfully for table SAPSR3.DBADFL
BR0925I Public synonym SAP_DBAOPTL created successfully for table SAPSR3.DBAOPTL
BR0925I Public synonym SAP_DBASPAL created successfully for table SAPSR3.DBASPAL
BR0925I Public synonym SAP_DBABD created successfully for table SAPSR3.DBABD
BR0925I Public synonym SAP_DBABL created successfully for table SAPSR3.DBABL
BR0925I Public synonym SAP_DBATL created successfully for table SAPSR3.DBATL
BR0925I Public synonym SAP_DBAOBJL created successfully for table SAPSR3.DBAOBJL
BR0925I Public synonym SAP_DBAPHAL created successfully for table SAPSR3.DBAPHAL
BR0925I Public synonym SAP_DBAGRP created successfully for table SAPSR3.DBAGRP
BR0925I Public synonym SAP_DBAERR created successfully for table SAPSR3.DBAERR
BR0925I Public synonym SAP_DBATRIAL created successfully for table SAPSR3.DBATRIAL
BR0925I Public synonym SAP_SVERS created successfully for table SAPSR3.SVERS
BR0925I Public synonym SAP_TGORA created successfully for table SAPSR3.TGORA
BR0925I Public synonym SAP_IGORA created successfully for table SAPSR3.IGORA
BR0925I Public synonym SAP_TSORA created successfully for table SAPSR3.TSORA
BR0925I Public synonym SAP_TAORA created successfully for table SAPSR3.TAORA
BR0925I Public synonym SAP_IAORA created successfully for table SAPSR3.IAORA
BR0925I Public synonym SAP_DD02L created successfully for table SAPSR3.DD02L
BR0925I Public synonym SAP_DD09L created successfully for table SAPSR3.DD09L
BR0925I Public synonym SAP_DDNTT created successfully for table SAPSR3.DDNTT
BR0925I Public synonym SAP_DBCHK created successfully for table SAPSR3.DBCHK
BR0925I Public synonym SAP_DBDIFF created successfully for table SAPSR3.DBDIFF
BR0925I Public synonym SAP_DBSTATC created successfully for table SAPSR3.DBSTATC
BR0925I Public synonym SAP_DBSTATTORA created successfully for table SAPSR3.DBSTATTORA
BR0925I Public synonym SAP_DBSTATIORA created successfully for table SAPSR3.DBSTATIORA
BR0925I Public synonym SAP_DBSTATHORA created successfully for table SAPSR3.DBSTATHORA
BR0925I Public synonym SAP_DBSTAIHORA created successfully for table SAPSR3.DBSTAIHORA
BR0925I Public synonym SAP_DBCHECKORA created successfully for table SAPSR3.DBCHECKORA
BR0925I Public synonym SAP_DBMSGORA created successfully for table SAPSR3.DBMSGORA
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0834I Public synonyms for database log owner SAPSR3 created successfully
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.18
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:23.841
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0
INFO 2008-09-12 14:12:25.190
Account orargp already exists.
INFO 2008-09-12 14:12:25.194
Account dba already exists.
INFO 2008-09-12 14:12:25.198
Account orargp already exists.
INFO 2008-09-12 14:12:25.202
Account dba already exists.
INFO 2008-09-12 14:12:25.251
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:25.260
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp0_1.sql.
INFO 2008-09-12 14:12:28.279
Account orargp already exists.
INFO 2008-09-12 14:12:28.290
Account 0 already exists.
INFO 2008-09-12 14:12:28.305
Account dba already exists.
INFO 2008-09-12 14:12:28.315
Account 104 already exists.
INFO 2008-09-12 14:12:28.335
Account 0 already exists.
INFO 2008-09-12 14:12:28.353
Account 105 already exists.
INFO 2008-09-12 14:12:30.123
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/brconnect.log.
INFO 2008-09-12 14:12:30.269
Output of /usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
INFO 2008-09-12 14:12:31.006
Execution of the command "/usr/sap/RGP/SYS/exe/run/brconnect -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 0. Output:
BR0801I BRCONNECT 7.00 (32)
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password inserted successfully into table OPS$RGPADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2008-09-12 14.12.30
BR0802I BRCONNECT completed successfully
INFO 2008-09-12 14:12:31.574
Account orargp already exists.
INFO 2008-09-12 14:12:31.578
Account dba already exists.
INFO 2008-09-12 14:12:31.583
Account orargp already exists.
INFO 2008-09-12 14:12:31.587
Account dba already exists.
INFO 2008-09-12 14:12:31.641
Removing file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:31.649
Creating file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/ora_query3_tmp1_1.sql.
INFO 2008-09-12 14:12:33.918
Account orargp already exists.
INFO 2008-09-12 14:12:33.928
Account 0 already exists.
INFO 2008-09-12 14:12:33.944
Account dba already exists.
INFO 2008-09-12 14:12:33.953
Account 104 already exists.
INFO 2008-09-12 14:12:33.973
Account 0 already exists.
INFO 2008-09-12 14:12:33.991

Solaris 10 11/06 Rev. A hangs during installation

Just received my Solaris 10 DVD package in the mail;
during the boot process to go into the installation process, it hangs no matter what you select in GRUB
this is the screen (when selecting to boot 'Solaris') in which it hangs...
SunOS Release 5.10 Version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
my hardware;
AMD Athlon 1800+
512 MB of RAM
80 GB HDD
ATI Radeon 9200 AGP

My Computer:
Intel Celeron 2.7GHz
80 GB Hard Drive
512 MB Ram
ATI Radeon 9200 PCI
I'm suspecting that it's the Radeon Graphics card (hope not, using the onboard will cut into system ram, I suspect that is the case for you also?) - but it is listed as working in the HCL last time I checkd.
It displays the copyright message, then the cursor jumps around the screen a bit and it justs there.
What type of computer do you have, and what model (HP, Dell, eMachines, Gateway, etc.)?
I may pull the graphics card out later and turn on the onboard graphics and see what happens then. First I'll try just changing the default display in BIOS and trying to boot the install, though. I'll post back and see if that changes anything.
*Note: Solaris 10 installation DOES boot on my main windows development workstation, which has the same card you have (AGP, instead of PCI like this one, though - but same card) - so I'm skeptical of the cause. Most probably a BIOS/misc. hardware issue. I tried loading the kernel in verbose mode (-v) and there were no errors.

Bluetooth device is not detected during installation of bluetooth driver

Hi , Initialy bluetooth was working properly, Few day ago I saw that there was no bluetooth icon in system trayas well as in list device manager. So I uninstalled the driver and try to install. But during installation it showthat bluetooth device in not detected and it exit.

Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
-tm
Edit: Don't forget to download the System Interface Driver too.

How to provide the driver disk during installation of OVM3.0.2

My OVM3.0.2 installation is failing because of the network driver not Native.
i have compiled the driver and made the driver disk using the OVM SDK for OVM3.0.2 but i don't find the option to provide the driver disk during installation . can anybody help in this issue.
if the dd (Driver disk option is not there what else i can do.

Hi,
You can avoid that specific lob type column by creating another table (create as select). After that import the table to the destination..,
Refer the link below,
data pump export selective column

Can I change the Installation disc for Creative Cloud - SSD drive is full

I have got a new imac with a 255GB SSD drive and a 2TB Data drive - I have half downloaded my Creative Cloud apps, and the SSD drive is full.
Can and how do I change the target drive to my empty Data drive to complete the installation
PLEASE HELP!
Thank you

Yes you can solve this issue by placing the applications on a other drive by selecting a custom installation location.
Click at the right top in the Adobe Application Manager after your user name, and select preferences
Select a alternate installation location.
Better: make some space on your SSD, performance of the application / loading time is increased when placing on a SSD.
Data storage / scratchdisks can be configured on the 2TD data drive.
See also: http://blogs.adobe.com/adobecustomersuccess/2011/10/25/optimizing-for-performance-with-ado be-applications/
Optimizing for performance with Adobe applications

Changing Lightroom Installation disk drive

I have a LR 4.4 on Windows 7.
I need to change the installation from disk drive C to D as the earlier is now almost full.
Is there a way to transfer or do I need to uninstall first from C and then re-install in D?
Where can I get the re-installation files?
I have the license number.
Many thanks in advance for all your help..

you need to uninstall and then reinstall. you can migrate your catalog(s): Lightroom catalog FAQ
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

PSC 1410 driver and fatal error during installation

Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you

hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you
hillie120388 wrote:
Good day people.
I have problem installing my PSC 1410 driver into my laptop. everytime i install it, it yields fatal error during installation.
i'm running on Window 7 Ultimate 64 bits.
Can anyone please help me?
Thank you

Change Default Media Location During Installation

Hello Everyone,
I'm currently working on installing iTunes using command lines to push it to multiple computers in the organization I work for. However, we would like to change the default media location to C:/iTunes (as an example) during installation, instead of it being created in \\server\user\music\iTunes (example). We'd like to change it so it's not storing files on the server and not taking up space on people's personal work shares.
I searched other discussions and Google'd it, but I couldn't find a definitive answer.
We use Windows 7 x64 operating system if that needs to be known.

Hmm, no one here has any idea if this can be done?

Driver alias changes during installation of Solaris

Similar Messages

Maybe you are looking for