Drivers problems on Portege R600 with WXP SP2 Professionnel X 64

Hi everyone,
I have to install Windows XP SP2 Professionnel X 64 on 5 LPT (1 R500, 1 R600)
I can't find 3 devices on both latptops.
One is named PCI SIMPLE COMMUNICATION CONTROLLER,
ID'S : PCI\VEN_8086&DEV_2A44&SUBSYS_00011179&REV_07\3&B1B FB68&0&18
The two others are named Unknown Device
ID'S : ACPI\IFX0102\4&EF53BAE&0
ACPI\TOS620A\2&DABA3FF&0
I looked for XP 64 Bits drivers, but i didn't find one who was working.
I also noticed that i don't see any modem (i got the 3G modem installed).
Can you help me to figure out those problems ???
Thx by advance !!
Vinz

Hi
Di you know this PCI device database?
http://www.pcidatabase.com/
There you can search for Vendor and Device.
For example:
ID'S : PCI\VEN_8086&DEV_2A44&SUBSYS_00011179&REV_07\3&B1B FB68&0&18
There you can see the vendor ID and Device ID:
Vendor: 8086
Device: 2A44
Device > Intel Management Engine Interface
I found the driver here:
http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2887&DwnldID=14617&lang =deu
You can also search for other devices and drivers

Similar Messages

A30 Modem Problem - Does it work with XP SP2 ?

HAS ANYONE GOT AN A30 (P4 3Ghz) INTERNAL MODEM WORKING WITH XP-SP2 ?
I've recently upgraded the hard disk in my A30 and installed XP SP2 and all the latest Windows updates and found most of the latest working drivers, but the last thing I'm trying to get to work is the modem driver.
Device mangler says the Toshiba Software Modem is installed - i.e. no driver / hardware conflicts etc - but if I try to query the modem from device mangler it cannot communicate and complains of a hardware conflict.
Similarly if I try to use any comms programs to get to the modem they complain 'unable to open COM3 - insufficient resources'
I've tried un-install & re-install different drivers from UK & Canada tosh support sites. The UK ones don't work at all, the Canada ones give the above symptoms.
The UK drivers worked with XP SP1, so my guess is there is a driver issue with XP SP2 - any one else tried it ?

Hi NA-A30-1, have you been able to find a driver yet to work with A30 and XP SP2 or resolve your modem problem otherwise?
I have a very similar problem. After a reinstall on a new hard disk and SP2, I still can't get the modem drivers recognised...
When I run the Modem Driver Installation program it runs for about 5 minutes and then closes as if everything could be ok. When I go to Device Manager, there is still a yellow question mark next to Modems (says "PCI Modem" with a yello question mark sign)...
I tried to search for the inf file, everywhere I could think of but until now, nothing seems to be recognised as the correct driver for this modem...
It would be extremely helpful if someone who has made progress can explain how they got around this problem.
Thank you.

No sound on Portege 3490CT with WXP

Hello,
I have bought a Portege 3490ct at eBay. All works fine except there is no sound available. I use WinXP SP2. I know there is a problem with service packs, but the same problem exists after installing WinXP without a service pack: It seems to be, that there is no sound device available. The Windows device manager only tells something from a "legacy device". I think it does not find the real Yamaha device.
Installing the new driver from Toshiba homepage only gives a "driver not installed" error message.
In the BIOS there is no possibility to deactivate the sound hardware.
Is it maybe damaged?
I hope anyone have an idea...
Thanks and Best regards
Mirko

Usually the term legacy device is used when referring to any device that is not Plug-and-Play compatible.
I can only suggest why it does not work and in my opinion its a driver problem.
The sound card which is installed on this notebook is compatible with Sound Blaster Pro and Windows Sound System.
The computer uses a YMF744B. The YMF744B incorporates PCI audio bus master, 64 channel wavetable synthesis interface, AC-2 interface and AC97 CODEC control.
In you case I would recommend searching for the newest driver for Yamaha YMF752 or driver which supports the YMF752 chip.
Check this:
http://www.softwarepatch.com/utilities/yamaha-acxg-driver.html

Satellite M35 - Brightness Not working with WXP SP2

After formatting and installing XP SP2, Brighness function keys do not work. Can anyone please point me to what type of drivers I need to download to get the Brightness working? I tried to install Power Saver from Toshiba site BUT I get error messages. Nto sure if this driver is for Service Pack 2 of XP.
Any assistance you can give in getting the M35 Satellite Brightness working with XP Service Pack 2 would be appreciate.
Thank you in advance.

Hello
Try please to install Toshiba Hotkey Utility for Display Devices for Windows XP. I dont know if just this utility is responsible for that but fact is that you should install all Toshiba specific stuff and combination of those tools result with full functionality.
If you dont have Tools & Utilities CD please check Toshiba US download page and there you will find everything you need.

BIOS acpi error with WXP SP2 on Sat Pro 4310 model

Hello,
I keep getting this message in my event logs
Is there a way (update,etc) to come around it
Thanks in advance
William

Hello
Well, I think its a Windows Xp problem. After a long investigation I found this information on the official Microsoft website.
http://support.microsoft.com/kb/q283649/
That is because the new ACPI specifications are not compatible with the BIOS.
Please check this:
http://www.microsoft.com/HWDEV/Onnow/BIOSAML.htm
It seems you have to upgrade your BIOS to solve this problem.
Bye

Portege R600 - Difference between cooling options

I have a Portege R600 with Windows 7 installed, but I guess my query is generic to all Porteges regardless of the version of Windows.
Could someone please explain to me what the different "cooling options" in the power settings actually mean? I couldn't find details anywhere.
Does battery optimized mean that the cpu fan gets activated only beyond a certain temperature? And what's the difference between cooling and maximum performance?
Is there any other way to set the cpu fan speed directly?
This is a very important point to me, because the fan of the Portege is terrible, too noisy, to the extent that I am considering return the laptop unless I find a solution. Sometimes it sounds like a Ferrari engine at a billion rpms!
Thanks!

> {quote:title=PauPau wrote:}{quote}
> I think such people should read more about notebook and operating system functions and should visit some more pages in order to be up to date?
>
> Did you visit the FAQ AND HOW TO DOCUMENTS are here in the forum and on the Toshiba European page?
> http://forums.computers.toshiba-europe.com/forums/category.jspa?categoryID=76
>
> How about this How To?
> http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=41
This points to:
[http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm]
which mentions that:
"If the sound of the CPU fan seems too loud, a setting that optimizes battery life will also cause the CPU fan to turn on less frequently."
However, my problem was quite the opposite: optimizing battery life causes the fan to stay off most of the times but to make the noise of a Ferrari engine at max speed when it activates. Optimizing performance, instead, means the fan is almost always on but barely noticeable, and never makes the disturbing Ferrari-like noise.
Maybe it's just me, but that kind of noise prevents me from using the laptop and would have cause me to return it had I not found a solution. I simply think that it's such a big potential problem that a clear solution should have been explained in huge letters, all the more so because the solution is very banal. It might be just my opinion, but judging by reviews and comments on forums, I'd say it isn't.
> This should be helpful? otherwise I don??t know what can be more helpful?

EAP/TLS , PEAP problem on PORTEGE with WinXP sp2 Tablet ed.

We have: ap Cisco AiroNet350 with WPA-EAP, Freeradius with configured EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2.
This problem discribed at http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
Maybe to solve this problem we need a fix ( http://support.microsoft.com/kb/885453/en-us ), but microsoft support tells to contact with notebook manufacturer.
Can anybody help me with this problem?

Hmmm Im not expert on this field but it seems that the MS OS update is need. (I hope)
The preinstalled Windows OS is a simply OEM version and usually every updates should be possible. However, if the MS guys told you to contact the notebook manufacture so you can contact the Toshiba authorized service provider in your country for more details.
But I have investigated a little bit in the net and found this useful site:
http://searchnetworking.techtarget.com/originalContent/0,289142,sid7_gci945257,00.html
1. 802.1X depends on communication between your wireless router and a RADIUS authentication server. Whether you're using WPA2, WPA, or WEP with dynamic keys, the following 802.1X debugging hints can be helpful:
a. Re-enter the same RADIUS secret into your wireless router and RADIUS server.
b. Configure your RADIUS server to accept RADIUS request from your router's IP address.
c. Use ping to verify router-to-server reachability.
d. Watch LAN packet counts to verify that RADIUS requests and responses are flowing.
e. Use an Ethernet analyzer like Ethereal to watch RADIUS success/failure messages.
f. For XP SP2, turn on Wzctrace.log by entering "netsh ras set tracing * enabled"
2. If RADIUS is flowing but access requests are being rejected, you may have an 802.1X Extensible Authentication Protocol (EAP) mismatch or credential problem. Fixing this depends on EAP Type. For example, if your RADIUS server requires EAP-TLS, then select "Smart Card or other Certificate" on your wireless adapter's Network Properties / Authentication panel. If your RADIUS server requires PEAP, then select "Protected EAP" for the adapter. If your RADIUS server requires EAP-TTLS, then you'll need a third-party wireless client like AEGIS or Odyssey.
Make sure that EAP-specific properties match for your adapter and server, including server certificate Trusted Root Authority, server domain name (optional but must match when specified), and client authentication method (e.g., EAP-MSCHAPv2, EAP-GTC). When using PEAP, use the CHAP "Configure" panel to prevent Windows from automatically re-using your logon.

Portege R600 - where can I find the correct SATA drivers?

I wish to install a solid state drive, and to maintain XP. Setting the correct partition alignment in the SSD and electromechanically installing it are now easy, but there is apparently a SATA driver problem because I cannot boot to either the Toshiba restore disk, a new XP install disk, or an image of the original HDD.
Some have suggested using nlite to slipstream the correct SATA drivers into the XP install, and then beginning from scratch with all app installations, etc.
When I look at the laptop's Devices, I find the Toshiba MK1652GSX HDD, drivers for which appear at
C:\WINDOWS\system21\DRIVERS - then
PartMgr.sys, pssnap.sys, and thpdrv.sys
Is that what nlite needs?
Is there another source for the SATA drivers for this laptop?
Thanks!

Hi, This is my very first letter in this community, so have me excused, if I use it wrong..I reply to the asking for SATA-drivers to R600, nor because I have a solution, but to ask for help myself in a matter much alike: I bought a r600, whishing to downgrade to XP. Unfortunately I did not recieve the XP-downgrade CD together with the Laptop, and now I simply can not get connection to the harddisk, when trying to install XP with a standard XP-boot installCD, even I read about and tried severel INTEL floppy images with Sata-drivers to impose during start of boot with the F6-command: They simply do not work!!
My question; Do ANY that read me in this community have a such XPdowngrade-CD from their puchase of the portege r600 that they do not use, AND WILL BE WILLING TO SELL TO ME ? Message with offer through my home mail? cheers, Niel, Aarhus, Denmark

Portege R600 - Is it possible to make a call with the SIM?

Hi,
I wonder if its possible to use the Wireless connection manager 5 and to make or receive a call?

Hi,
I see that nobody answered so i will try to explain what i meant -
Is it possible to make audio call with the Wireless Manager by the GSM modem module?
I succeed to send SMS and to connect to HSPA data services but i dont find any reason why i can not connect to the GSM and make a call.
I have Portege R600 model PPR61E-01C00NG3
I even succeed to use the GPS that probably installed in the GSM/HSPA modem (wireless manager 5).
If anyone can explain how and if it possible to make a call please send your reply ... i wnat to use the laptop with BT instead of cell phone ....
Thanks
Yan

Need WXP drivers for a Portege R500-106

Where can I find XP drivers for a Portege R500-106? Driver download page only has XP WLAN driver and no others.

Hi again
Sorry I thought this new notebook is just Vista preinstalled. Other way I do not understand why you need WXP drivers when you can install recovery image that contains all necessary drivers, tools and utilities. As I can see WXP Pro should be preinstalled on this notebook. Is it not good enough for your work?
By the way: some drivers you can also find on http://209.167.114.38/support/Download/ln_byModel.asp#
Usually if you have European model you should use stuff designed for European models but you can use offered drivers from Canadian download page.

Updated to 4.01 and it would not start, removed and loaded 3.6 with no problems ??? running XP SP2

Have been using ver.3.6 for months and have not had any problems, tried to update to 4.01 and it would not "start", even after re-starting the pc. Removed and reloaded ver.3.6 and no further problems.
System is a XP SP2 ???
Are there any issues with ver 4.01 on XP

No, there are no issues running FF4x on Windows XP. I have that OS installed myself.
You appear to have McAfee Site Advisor installed. Versions prior to 3.3.1 are incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
See also: http://kb.mozillazine.org/Problematic_extensions
Disable McAfee Site Advisor in Tools | Add-ons | Extensions and then update Firefox again via '''Help '''| '''Check For Updates'''.

Portege R600 and Windows 7

I installed Windows 7 (custom install). Subsequently installed the Toshiba installer to load all relevant programs/drivers. I have a problem with the screen, particularly in Word 2003. It will suddenly distort, so that the words become faded/dotted/lined, in such a way that you cannot read the screen. A second open document in Word will be unaffected. Closing the particular document and re-opening clears the problem. The document remains fine, and is not corrupted.
Also found that sometimes when booting up or waking from hibernation, the machine freezes and it sounds like the fan is working overtime.
Nothing will happen then unless I force a power down and restart.
Finally, the wheel on my mouse (latest Windows 7 drivers installed) will not work to resize a Word screen, and will not work in the folder pane in Outlook 2003.
Any thoughts?
Cheers

Strange! I have installed Office 2003 on two Toshiba notebooks with Win7 and everything is OK.
Have you noticed some other display issues running Win7 on your Portege R600, for instance in Internet Explorer or some other running application?

Portege R600 - SD Cards detected but can't browse or format

Hi
I have problem on my Portege R600-10U (Windows 7 Ultimate) with SD card reader. When I put SD card in to the slot it is detected by the system but I can not brows it nor I can do format.
I did installation of RICOH_Media_Driver_v2.07.01.00 from Toshiba support site but when I check driver for SD card reader it is showing some default generic driver from Microsoft.
Also I am not sure if that is important, but I can see sd reader on the list of devices only when I put card in to the card reader.
I even tried to do manual installation of driver by selecting extracted content of carc-20091103162555.zip (RICOH_Media_Driver_v2.07.01.00 folder) but windows didn't found any appropriate inf files in it.
Am I missing something, are there any prerequisite before I do installation of card reader driver or maybe card reader it self is not working properly.
Many thanks in advance,
Igor

I am trying to use Kingston class 4 SDHC with 4GB capacity. A far as I know r600 should be able to read it without any problem. Card it self is ok since I use it in my camera.
I don't have any warnings on device list with or without Ricoh media driver installed. When you check SD Host Adapters, you can see SDA Standard Compliant SD Host Controller and driver provider is Microsoft.
Problem is I am not sure where to look in order to see if Ricoh drivers are used and not some Microsoft default driver.
Cheers

On Screen Display not working on T61P running WXP SP2

This started with an error on 'tponscr.exe' when I hit a volume button. I reinstalled the Thinkvantage Hotkeys from the Lenovo site and I no longer get the 'tponscr.exe' error but the on screen display doesn't work (Volume does change tho). The Fn keys also do not work as well. System update also did not correct. Any help or suggestions would be appreciated. Thanks,
M/T 6457-C34 T61p WXP-SP2
Message Edited by SVOGT on 07-12-2008 05:37 AM

I've had no luck with the latest HotKey drivers on my T61. I revereted to the driver version that came with the T61 and things seem to be working. In case you want that version, I've posted it to
http://www.jmbissell.com/7kvu13ww.zip
John

Portege R600-11B - Cannot install Adobe Acrobat 9 - ActiveX issue

I have recently purchased a Portege R600-11B and have been trying to install Adobe Acrobat 9 on it by downloading from the Adobe site.
I have spent several unsuccessful hours talking to Adobe to try and resolve this issue.
They have concluded that my laptop is not compatible with the software.
This is not the case as this laptop exceed the systems specification required in all aspects.
The problem appears to be that it will not run ActiveX even after all firewalls and virus software in disabled - I don't really know what to do - does anyone have any suggestions please?

>They have concluded that my laptop is not compatible with the software.
Thats simply nonsense
The Adobe Acrobat Reader is a small application and can be installed on nearly all computers and systems So thats definitely not a reason why you are not able to install this software.
If this issue is related to the ActiveX then you could change this in your internet browser settings.
For example using the IE7 you could change this here:
Tools->Internet Options->Zones->{zone}->ActiveX controls and plug-ins->Allow previously unused ActiveX controls to run without prompt
You could also try to clean the OS and the registry because the issue could be related to the faulty registry entries.
For this I would recommend using the CCleaner free tool.
Last but not least its always advisable to check the support homepage of the software manufacturers. Here you can find some docs about installation issues with the Adobe Acrobat Reader.
http://www.adobe.com/support/reader/
Check it out!

Drivers problems on Portege R600 with WXP SP2 Professionnel X 64

Similar Messages

Maybe you are looking for