Drivers Stop when mailer sends email

We have recently deployed a proven mailer process to a customers existing installation. The process sends out a text message based on alarm conditions. On our customers computer whenever the mailer object is triggered, both an AB driver (ethernet to a SLC500) and a Modbus driver (TCP/IP) generate communication alarms and will not restart until Lookout is shutdown and restarted.  Simply restarting the driver process will not restart the communications. The Modbus error is "No response from socket", the AB  error is "cannot communicate with device (code=2)". There is also a DirectLogic Plus driver object that provides ethernet communications to several Koyo PLCs, this driver is not affected. I can NOT duplicate this at our office, our test setup works as expected. We have tried this both with and without using a SMTP server, there is no difference. We have also used this same basic arrangement at other sites without any problems.
The system is Lookout 6.1 with updates, the PLC network(ethernet) has 1 SLC500, 4 direct Logic DL260 and DL06s, one Modbus device through a Digi Serial server, 2 Cmore touch screens, and 1 panelview touch screen. The troubled computer is WindowsXP SP3, has two nics, one wired for PLCs and one wireless for internet. Our test computer that works just fine is also WindowsXP SP3, has 2 wired nics one for PLC and one for internet. The nics are on different subnets.
All ideas as to what might be happening are appreciated.
Jim Besselman

The email is successfully sent by Lookout. I haven't tried pinging the smtp server but while the communication is good but since the email is sent I expect that we can. We can view web pages normally and send and receive email using outlook express without causing any disruption to the PLC communications. The problem is somewhat unique to either this particular computer or the network settings. We have been using the mailer object for several years with lookout versions 5.1 and higher and various PLC drivers with out seeing this before. I have seen another instance where an onboard network adapter caused Lookout problems even though Lookout was not using the network. In that case the issue was solved by installing a new network card and disabling the onboard network adapter. I'm pretty sure replacing the computer will fix this but I'd really like to know what the cause is.  I guess my next step would be to use a utility to monitor the network traffic unless you've got some other ideas.
Thanks
Jim Besselman

Similar Messages

  • TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

    Restating my issue / question...
    When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
    Hence, I have ruled out the issue is a yahoo mail matter.
    Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
    Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
    Any ideas?
    GMc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I am using Mail 5.3 with two separate gmail addresses. One is personal the other is business. When I send emails from the business address, any auto-replies I get COME TO THE PERSONAL INBOX. I imagine that this is a setting? Please help!

    I am using Mail 5.3 with two separate gmail addresses.
    One is personal the other is business.
    When I send emails from the BUSINESS address, any auto-replies/out of office notices I get come to my PERSONAL INBOX.
    I imagine that this is a setting? Please help!

    Edit the SMTP server list. Add a new one for the business account. Put the correct password and information for it. Give it a description so you will know which server is which. Mke sure the correct server is highlighted in the account selected and check the box to use only that server for that account. Do that for the other account also.

  • Problem with Thunderbird email: When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others rece

    Problem with Thunderbird email:
    When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
    Bob Greenman

    Are you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.

  • When I send emails, my friends told me my name doesn't appear in the "from" column. How do I solve this problem?

    when I send emails, my friends told me my name doesn't appear in the "from" column. How do I solve this problem?

    Badunit, thanks for your reply. I just went into Mail/Preferences/Accounts, "full name" field is filled correctly with my name. This happens to only certain recipients, and not every emails. Sometimes my name shows and sometime it doesn't show. And this only started to occur recently.

  • How do I set a new account as default in safari when I send emails from a web page

    how do I set a new account as default in safari when I send emails from a web page
    thanks in advance

    In the Composing pane of Mail's preferences window, look for the pop-up menu labeled "Send new messages from." Select the desired account there.
    Note, though, that this won't change the behavior when replying to a message... in that case, the reply will be sent from the account that received the message, unless you specify differently at that time.

  • When i send email with 2 account 3G and wi-fi it take 15 minutes help

    when i send email with 2 account 3G and wi-fi it take 15 minutes help

    Welcome to Apple Support Communities.
    It's probably quite simple, and nothing to do with your Address Book group.
    It is a matter of 'junk mail' or 'spam' filtering on the recipient end, I think.
    1. Apparently not everyone in your Address Book group (12 of 15 apparently?) has your current email address among their 'permitted email addresses', so, your original email message ends up in their 'junk mail' or 'spam filter' or whatever it is called by their email provider. Some businesses and schools also filter incoming messages for subject, language, content, or by sender's address (one company I dealt with prohibited all incoming email from Hotmail, for example), so it could be filtered at that level. In that case, the recipient might have to specifically ask the IT department to add your email address to a 'permitted' list.
    2. When someone else in the group hits 'reply all', THEIR email address IS among the 'permitted email addresses' for everyone else, and they are in effect 'forwarding' your message from their email address, so the filtering affecting your email address does not affect their re-sending of your message.

  • How to stop ical from sending email notifications for updates on my share ical calendar

    Is it possible stop ical from sending email notifications for updates I make on my share ical calendar?
    Mac OSX 10.7.2
    Very annoying for the person I am sharing my calendar with to get an email every time I change something.
    I hope there is a way to stop the emails, but for the updates to still go on their calendar.
    Thanks

    Great idea Lofty! thanks. If the person you are sharing a calendar with is a Yahoo Mail user, you only need to set up one filter (under Options - Mail Options - Filters) and route to Spam folder or a special folder for that purpose.
    Add a filter with the following parameters:
    Sender contains:    "Your First and Last Name" as it appears in the emails they are receiving
    Subject contains:  "Your First Name"
    Email body contains: "iCloud"
    Don't need to match case on anything. 
    So far, only these unwanted emails are being routed to the folder I chose.
    Hope that helps until Apple gets it's act together

  • HT204150 i set up an icloud account for my mother in law and when she sends emails it says they have come from me, despite me never entering my details.  On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

    i set up an icloud account for my mother in law using my mac and when she sends emails it says they have come from me, despite me never entering my details.  On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

    Look in Mail Preferences>Accounts, the Full Name field.

  • I run DeviceDemo sample to send email, when click send email button after f

    I run DeviceDemo sample to send email, when click send email button after filling all fields, it took me to EverNote application, can not send email. does anyone has this kind experience? how to fix it?

    Hi,
    ADF Mobile cannot directly send emails as this is a security precaution of your mobile phone (imagine all applications could send mails without you confirming). Instead the send mail functionality launches the mail client you have configured and fill in the information you provided in the application. The mail function by the way is implemented through Cordova.
    Frank

  • Why is it that when i send emails duplications were created? the recepient says he receives multiple emails from me...

    why is it that when i send emails duplications were created? the recepient says he receives multiple emails from me...

    It is a bug. Try quitting Mail and then reopen it.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Mail Feedback

  • On my Mac Pro, when I send emails, it always gives me the option of adding an attachment with a paper clip. Today, the paperclip has vanished. What do I do ?

    On my Mac Pro, when I send emails, it always gives me the option of adding an attachment with a paper clip.
    Today, the paperclip has vanished. What do I do ?
    Simon

    http://www.apple.com/support/mail

  • When I send emails using my iPad, recipients are telling me that I am sending them blank emails.  I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white...

    When I send emails using my iPad, some recipients are telling me that I am sending them blank emails.  I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white.  Interestingly enough, I was a Windows user just a few months ago and I was on the receiving end of this same problem with someone who was sending emails from her iPhone.  I don't believe it is happening every time but if it happens even once it's a problem.  Any idea what's going on? 

    Oddly enough, having reported the problem it appears to have fixed itself. There may be some combination swipe gesture that triggers it is all I can think because I suddenly manged to zoom my display x3 by double tapping three fingers. Took me a while to sort this out but then when I got back home I could suddenly see all my emails again. Bizarre!

  • When I send emails with photos from iPhoto recipients often tell me images are upside down.  What would cause that?

    When I send emails with photos from iPhoto recipients often tell me images are upside down.  What would cause that?

    Found this :
    https://discussions.apple.com/thread/3431867?start=0&tstart=0
    by doing this :
    http://www.google.com/search?q=images+are+upside+down+ios

  • When I send email to a group, it shows all members addresses even though that option is turned off in the preferences.

    When I send email to a group, it shows all members addresses even though that option is turned off in the preferences. This just started happening on all my devices. I have the latest update instaled.

    That doesn't work on Mavericks. Follow Tuttle's advice.

Maybe you are looking for

  • Frequently getting issue in queues

    Hi Gurus, Can any body tell me the resolution for one of the issue which we are currently facing is 'object is locked by this user xxxxx" we are getting in smq2 of ecc system so we are resolving this issue by resetting the status of queue so it is wo

  • Bluetooth dialing on Intel Mac

    It seems that some OS X Universal Applications are not universally the same on Intel as on PowerPC. When you click on the label to the left of a phone number in Address Book you get an option menu to dial and to SMS using a bluetooth phone. Except if

  • Document /View/Save/find taskbar

    How we can we remove Document /View/Save/find taskbar in bo report viewed in sharepoint or infoview or dashboard builder

  • EAX / 5.1 Surround / Dolby - is there anything for linux?!

    Hi all. I've had a 7.1 Hercules Digifire soundcard for a while now, and it was awesome on Windows for surround sound. Being into my gaming, and just as into my films, I like using linux for both. The problem is, there seems to be absolutely no suppor

  • Shockwave installed but not available in the Program Files list

    I have the latest version of this program successfully in my PC (Windows XP) but I can not associate a file extension supposed to be used with this program because the system does not find it and I can not find the access route to it.