DRM and HFM integration when Org by period is ON

Our HFM application has Organization by period turned ON. Thus, when there are entity hierarchy changes, we actually dont move entities but just change their active parents. We are using DRM for master data management where hierarchies are defined. however, when structure changes are to be made in DRM, we have to actually move the nodes from one parent to another. Now loading this revised structure in HFM would change the consolidation structure for all periods and not just subsequent periods. How do we handle this?

Maybe load the entity changes in merge mode, which will leave them in both the original location and the new location. Replace mode on the other hand will remove the child from the original parent.
--Chris

Similar Messages

HFM 9.2 (Org by Period)

Is this an option in 9.2 or did this start with 9.3

Thank you. I am there now but what is the nest step after i choose this option. I was told this option would allow us to manage our Entity structure and allow us to have different entity structures for each period. So when i add a new entity, is there something i need to check off if it applies to that period? I am not sure what i do now to make this work. There is not much information on this in the Admin guide.
Can someone please explain how this option works and what it does

CC and Lightroom integration: when will LR finally get a 100% integration into the installer?

It still gets installed to a different folder (ignoring the base folder I set for CC) and the installer still says it's not installed after installing.
I had CS6 and standalone LR before CC, that might be the cause, but I am NOT going to reinstall everything to get back to where I am now.
I bet there's some registry entries that override the settings you set in the CC installer, but apparently no one ever cared about cleaning this up.
Because CC doesn't recognize the LR installation properly (even if I installed it using the CC installer) LR never gets updated, I always get a popup on starting LR.
PLEAAASE fix the installer and/or the LR package so everything is fully integrated. Thank you!

addendum: Installation always goes to C:\Program Files\Adobe\Lightroom ... instead of C:\Adobe\ where all the other CC apps go.

Consolidate YTD in Actual and its relation Org by period in Application set

Hi Peers,
Make me clear for the following
Actual data: the data which is past for 12 month periods of data apply the same with Scenario dimension member"Consolidate YTD. and next Org by period is Future related now please explain me these concepts how,why,where

Hi,
Please go through the below link for your answer.
HFM Scenario
Regards
Dev

What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

What does "Only DRM free/unprotected" mean when trying to transfer pictures and videos to my laptop?

Only Digital Rights Management music and video which you do not own rights to copy or use cannot be placed on your device.
songs you have paid for or own outright will not have those restrictions.
hope that helped?
Good Luck

Planning & HFM: integration practises + drillback from HFM to Planning?

Hi,
I small question appeared when we were planning a new application with HFM, Planning and possibly FDM.
Question 1:
What is the best solution to use for data integration between several Planning applications and HFM?
Planning would be used to create the budget, make investment calculations etc. and then push the consolidated information into the HFM.
Integration dataflows:
EBS <-> Planning -> FDM -> HFM
EBS <-> FDM <-> HFM
Question 2:
Is it possible to drill-back the consolidated data from HFM -> FDM -> Planning?
Question 3:
Is FDM the most suitable solution in these cases?
Thank you,
Nicklas

As long as the user has access in FDM and is able to view the data for the location, this should work.

XMII and BW Integration with OLAP connector

Hello Colleague,
Need your help in one of our xMII and BW integration. We have created all the config step as indicated in the How Tou2026 Integrate xMII with the Business Information Warehouse guide in SDN.
But when I tried created an OLAP query in xMII work bench it is giving following error. And the default Trace indicate the below detail.
36##0#0#Error#1#/Applications/XMII#Java###org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
[EXCEPTION]
#1#com.sap.xmii.Illuminator.system.CommunicationException: org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
     at com.sap.xmii.Illuminator.connectors.OLAP.XMLARequestHandler.discoverRequest(XMLARequestHandler.java:129)
     at com.sap.xmii.Illuminator.connectors.OLAP.OLAP.doProcessRequest(OLAP.java:91)
     at com.sap.xmii.Illuminator.connectors.AbstractConnector.processRequest(AbstractConnector.java:97)
     at com.sap.xmii.Illuminator.services.handlers.IlluminatorService.processRequest(IlluminatorService.java:56)
     at com.sap.xmii.Illuminator.services.ServiceManager.runQuery(ServiceManager.java:49)
     at com.sap.xmii.servlet.Illuminator.service(Illuminator.java:63)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: org.apache.commons.httpclient.HttpRecoverableException: org.apache.commons.httpclient.HttpRecoverableException: Error in parsing the status line from the response: unable to find line starting with "HTTP"
     at org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1962)
     at org.apache.commons.httpclient.HttpMethodBase.processRequest(HttpMethodBase.java:2653)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1087)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:643)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:497)
     at com.sap.lhcommon.xml.XMLHandler.getDocumentWithPost(XMLHandler.java:502)
     at com.sap.xmii.Illuminator.connectors.OLAP.XMLARequestHandler.discoverRequest(XMLARequestHandler.java:126)
Kindly Help.
Best Regards,
Biswa

Hi Biswa,
you go through the following threads which is regarding OLAP connector:
https://forums.sdn.sap.com/click.jspa?searchID=14697177&messageID=5530170
https://forums.sdn.sap.com/click.jspa?searchID=14697177&messageID=5636842
Hope this will help you.
Thanks,
Manisha

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Brain pick on an old problem of mine (squealing and poping sound when system is under heavy loa

Firstly, my apologies if this post gets double posted as I am on a barely functional dsl connection? It get?s flaky when it rains which is only periodically for about 2 months of the year?
I was wondering if someone in the know might be able to clue me in as to any fixes for this VERY old issue of mine.
I have already searched a bit and all I found was the squeal and crash issue, mine is similar but not identical.
History:
I have been a creative card user since the first SoundBlaster came out (and jammed it into a 286 system). Well I think it was the first since I was new to computers then?
Anyway I have had an SB, SB6, SB6AWE, SB Li've, and now SB li've Audigy 2 ZS. Pretty sure I had an audigy pro card (a family member was upgrading so I grabbed theirs for cheap).
Since around the audigy series of cards I have been working on friends and family member?s (and their friends/family) on the side. Though these days I am not a happy camper.
Problem:
I am having this problem that I have now learned to li've with where when I am playing sounds (game or music) and the system gets under some type of heavy load I get LOUD squealing and popping sounds (mostly the squealing kind). The sound can be in excess of my volume settings and I tend to wear headphones (I can't believe I wasn?t deafened the first few times and occasionally recently when I forget, actually I have been having trouble understanding people lately, need to get my ears checked I guess).
Heavy load defined:-On occasion copying files from one dri've to another (usually large files in this case).
-Always when copying files over a network to or from my system.
-in few cases of a network heavy or hard dri've heavy application (lan games anyone?) ? Mostly when I am hosting.
NOTE: for the most part the card works fine in games as I usually don?t do something else while playing a game, usually.
For how long?:
This is hard for me to place. I remember wanting to upgrade to 2k when it came out but I heard from friends that had tried to upgrade that the drivers for the sb6 awe or any other creative card were garbage so I delayed upgrading to win2k till I got my first + ghz system and didn?t have much choice. I have been dealing with this since (also at the time I had an audigy or perhaps just a li've, hard to place).
Steps to solve this (not resolved yet):
I have tried several different configurations, this problem has been present on both an amd and 2 (or more) different intel chi
ps.
The problem has not been present on non-creative products under 2k (yes I had a card made by the company that creative bought out a while back), driver updates have done nothing or made it worse (though recent drivers seem to be a little better).
A while back (on the amd machine) I tried dealing with creative via e-mail and got canned responses of things I had already tried (and had noted in my request for help that I had already tried them) even as far as completely clean installs and as I mentioned different systems.
I am now using completely different hardware besides the sound card. Swapping out for other soundcards doesn?t help if they are creative cards (I even went as far as trading someone else identical cards to no avail).
I have even tried windows xp to see if that would help, nope.
The only solution to this so far has been not to use the card and for a while now I have been suggesting to friends and family to just use the internal on mobo sound instead of an add on creative card.
I have even had someone else build me a system (as apposed to my building it) just in case I was doing something weird, no help.
That and just not listening to anything when I am about to put my computer under a heavy load (and making sure to disconnect the phones just in case since sometimes it happens without sound playing, RARELY).
Current system specs:intel p4 2.66 ghz
Audigy 2 zs (platinum if memory serves, pretty sure here)
Geforce 6800gt
gig of ram
(I would have to hunt around for other details like mobo)
I have to say all this effort to get one companies hardware to work just sucks and what sucks more is I have no choice on the market, there is only one noteworthy sound card company when it comes to gaming, on the plus side there isn?t much for me to look forward to in gaming these days? I don?t like MMOs (if I can't play in on a lan and just the people on the lan I don?t care for the game much). Halflife (the reason I bought the geforce 6800 gt card) renders the world in such a way as to make me motion sick (just like all the quake games) so that was a waste of money?
The reason that there isn?t much to look forward to in gaming is because I can just disable my creative card and enable my onboard mobo sound and actually hear sound while doing stuff as apposed to garbled deafening screeching sounds that I do now when I forget to stop sound before doing something hard on the system?
Personally this is a last cry for help before I completely give up, I am already a very disenchanted customer hoping there might be some way that I can just listen to music or play games without much worry about sound (the squeals can be heard from across the room from the headsets set at a normal volume so you can imagine what that?s like when they are on my head). I have already, for the last couple of years, been steering people away from creative products in general touting their core product a failure and the people that didn?t believe I just let them sit and listen to some music and then copy a file?
Sound and music are almost more important to me than graphics btw, I have returned games for poor (in my opinion) quality sound tracks (mostly EA products) and have bought games that had good sound/music but poor graphics, heck I still play some old dos games (loom anyone).
Sorry the end there got a little ranty, so anyone have suggestions to the problem section?
One last thing: This took me a while to find and is a bonus to anyone that read all that? For some relati'vely cheap 5. headphones (all I had looked at were over $00) check out the zalman headphones. I have had mine for well over a year now and they still sound just as good as when I got them (even after the ear shattering squeals) and only cost me $50) They are sturdy too (more than I expected), I tend to break headphones within 5 months even some nice $50 stereo ones and these things are still intact. By break I mean break a wire, blow a speaker (squeals) (not literally exploded), snap the headpiece? I can't seem to see a direct link to the speakers so google zalman and headphones?

I don't know if anyone is following this or cares much but I thought I would add some info for those that like me before signing up, simply searched and found some useful tidbits. I also didn't see an option to edit my previous post as most boards I post on have that option to give you an alternati've to double posting...
My system was gigabit however I only had cat5 cable with a megabit switch. Now the switch is gigabit with a cat5e cable and a short distance from me to the hub (same system otherwise). The gigabit is onboard.
I figured I would see a bit speed boost with the new network and indeed in games I did see an improvement on large data transmitting games (American Conquest 4x4 maps in multiplayer LAN) however I expected file transfers between me and other gigabit on mobo cat5e systems would be significantly better. Instead I saw speeds only slightly better than before, around to 2 megabytes per second (using a measurement tool Netstat li've from AnalogueX) and that annoying screeching. At those speeds that might explain why the game was still on the jerky side (a full blown 4x4 map the way we play stresses all computer components but network seemed to be the bottleneck).
My solution to getting fast file transfers? Disabling my sound card by going to device manager right clicking on the Creative SB Audigy 2 ZS item and choosing disable. With an acti've file transfer (large single file rather than small files) I saw about -2 megabytes per second. Within moments of disabling the soundcard I suddenly had about 20 megabytes per second and the estimated time went from 0 minutes to almost finished...
I have to say on an aside that this just adds to my disappointment with this card (and the fact that I have seen similar poor performance in other peoples cards set up by me or not). This continues to cast a light of doubt for me and future creative products. I have to say though that the X-Fi (after fully updating drivers) seems like it *MIGHT* be worth a try? I certainly won?t drop any money into a new creative card (or recommend creative computer equipment) until I see some good proof that problems such as those that plagued this and other creative cards are gone.
Now remembering several posts I read here (and why I am even posting this), I tried disabling some of the features of my nice Creative card (through the various consoles for example the EAX console). Indeed I did see a performance boost (more on that later) as well as death to the squeals (though oddly I did hear that odd electrical interference noise that is supposed to be why onboard audio sucks) and my ears thanked me for that. As for performance my transfer rates went from -2 megabytes per second to a whopping 4-8 megabytes per second (mostly 5). I am definitely leaving those special features disabled for bandwidth intensi've games, after all they are mostly meant for movie and music enhancement (though they make some games sound nice too). I should note that the squeals, though not deafening, are present with other separations in playback, during file transfers. This isn?t much of an issue for me since win2k (and XP) lets me disable and enable my sound card at will without reboots (most of the time) and it has become habit to work around my sound card in this way already.
I know that there is a limited bandwidth on the system bus between all devices however I just have to wonder why my SB Audigy card is using up so much bandwidth when not doing jack... That and I thought that limit was much higher than 20 or so megabytes per second which has me wonder just how much this sound card is wasting (and possibly stressing) in my system when not doing anything. My guess though is the sound card is merely interfering with PCI traffic and not acti'vely using it (though I am not aware of tools to check this). This might explain why I have gotten less than stellar performance out of other hardware though I have yet to try pushing my system with the sound card off yet?
While I still can't recommend creative sound cards to customers at least I can't say that Creative doesn't make anything worth buying anymore (and I used to be a huge creative advocate). The new Zen mini player got pretty good praise (search maximum PC for the review).
Assuming this thread stays open I will add more of my hopefully useful experience with this sound card. If on the other hand it'ss closed up (since there were a few unkind comments) I should have to assume that Creative has completely turned it'ss back on me as well as my current and future customers (unless some other reason for closing is given of course). As it is now I see signs of improvement in the companies? products (which pleases me to no end) though not yet enough to justify my spending or recommendations, besides the portable device, though I have no interest in devices that don?t allow for flash memory expansion I have been asked about them on occasion.

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

Facebook and Twitter integration not working

I'm have trouble using Facebook and Twitter integration in Mountain Lion. When I click 'Click to Tweet', or 'Click to Post', nothing happens; I don't get the notecard looking thig, and it's like I never clicked the button. Same thing with sharing from an app, except for Twitter. I receive notifications from both just fine, but I'm unable to post. I can tweet something from the sharing menu (link to a webpage with Safari, for example), but I cannot send a tweet using the 'Click to Tweet' button in Notification Center. Also, I cannot post to Facebook by neither sharing nor the 'Click to Post' button. So far I have tried sharing with Safari, Finder, and Preview, all with the same results. (Facebook sharing with iPhoto does work, but I don't believe that is integrated with OS X.)
I have also tried the following, with no luck:
Checked my settings on the Facebook and Twitter sites.
Removed my acounts and re-added them.
Obviously, my internet connection is working.
Added my Facebook account to the 'Guest User' account, and another administrator account.
Had a friend add his Facebook account to his own (limited) account on my computer--he could not post to Facebook either.
I believe the last two things I tried indicate that this is a system-wide problem. A couple more things to note: 1) there is no kind of error message; it just sits there, like nothing happend, no 'spinning wheel' or anything. 2) It DID work before. Twitter worked when I first upgraded to Mountain Lion, and Facebook worked when I installed the 10.8.2 update. I don't use either often enough to know when exactly they stopped.
Here is a video illistrating my problem.
It's been driving myself crazy with this over the past few days, and can't seem to find an answer anywhere. I also seem to be the only one with this problem.

First, I would eject whatever it is that you downloaded. Go to Finder and eject it that way or depending how you have your system set up, do the two finger tap and Eject it. Download the link above. Once it downloads, double click it to install it. It should work. If it doesn't you need to use your Disk Utility to check for errors. Click your Finder again and then Applications. Scroll down to Utilities and then Disk Utility. Click on your hard drive and you will get a menu of items on the right side. Towards the bottom, you will see a button to Verify Disk Permissions. Click that and let it run. It may take a few minutes to finish. Once it's finished there may be a list of things wrong with your system. Click the Repair Permissions and let the computer do it's thing. Use Disk Utility at least once a month to make sure everything is in order on your system. If this doesn't fix it, I don't have any other suggestions. I'd hate to say do a fresh install but that might be the next step if this doesn't work.
Something else to consider is that is if you use Time Machine and the system did work at one point, you could go back to the last known good point and reinstall that back-up. You would lose anything you have saved since that point (obviously). If you take steps to back up your information, that should not be an issue. (For me), Time Machine works as advertised. If you are not backing system up regularly, shame on you. You need to start ASAP backing up. It's an easy process and it's times like you are having now, that make the small preventive maintenance, worth extra time and effort.
Good luck.

How can i get the month and year of the current open Periode?

At the beginning of each month the booking period for the new month was not open,but i need to book material automatically with the last day of the old month. The booking period will change at the first working day between 13 and 17 a clock. when the booking period was changed i have to book with the current date.
How can i do this ??
Regards
Ralf

Hi Ralf,
here's a complete example:
DATA: last LIKE sy-datum, "ultimo of last month
 gjahr LIKE t001b-frye1,
 buper LIKE t001b-frpe1.
last = sy-datum - sy-datum+6(2) .
PERFORM check_period.
IF sy-subrc <> 0.
ADD 1 TO last . "-> next month
PERFORM check_period.
IF sy-subrc <> 0.
 MESSAGE a001(00) WITH 'no open fi period'.
ENDIF.
ENDIF.
*formatting for germany
CONCATENATE last+6(2) last+4(2) last(4) INTO bbkpf-budat.
WRITE: / bbkpf-budat.
FORM check_period.
MOVE last(4) TO gjahr.
MOVE last+4(2) TO buper.
CALL FUNCTION 'FI_PERIOD_CHECK'
 EXPORTING
 i_bukrs = bbkpf-bukrs
 i_gjahr = gjahr
 i_koart = '+'
 i_monat = buper
 EXCEPTIONS
 error_period = 1
 error_period_acc = 2
 OTHERS = 3.
ENDFORM. " check_period
regards <a href="https://www.sdn.sap.com:443/irj/servlet/prt/porta
l/prtroot/com.sap.sdn.businesscard.SDNBusinessCard?u=i
Wo3ssHlIihvCrADIEGqaw%3D%3D">Andreas</a>
Message was edited by: Andreas Mann

Hi there, Can you please HELP ME? I created a signature for my email account, but I can not choose it because the option is daded under "none"and nothing happens when you click on it! Thank you, Johan

Hi there, Can you please HELP ME? I created a signature for my email account, but I can not choose it because the option is daded under "none"and nothing happens when you click on it! Thank you, Johan

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Upgraded to Firefox 8 and rebooted but when trying to start FF get message that reboot is require to complete installation; same message if I try to re-install or uninstall FF. Writing this using Google Chrome.

Upgrade to FF 8 (from 3.6) appeared to go smoothly, as did reboot, on Acer desktop running Windows 7 Home Premium. But I get "reboot required to complete FF installation" every time I try to start FF. Tried to uninstall FF using Control Panel uninstall and also using the uninstall in my Mozilla folder--get same "reboot required" message. Tried to reinstall FF--same message. In short, FF totally inoperable--and I'm starting to like Google Chrome.

Please see:
http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Delete the files in:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
(The above is for a windows installation - a Mac installation stores its files in /Applications/Firefox.app 
To open one of these folders in OSX, Ctrl-click it and select Show Package Contents. )
Download a fresh copy of Firefox for installation.
Uninstall your current Firefox version before installing but don't remove your profile data when you uninstall Firefox (do not select to remove personal data) or you will lose your bookmarks and other data in the profile folder. Remove the program folder for Firefox as well.
Do a clean reinstall as an administrator. See:
http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
For information on your profile folder, see Managing profiles and:
http://kb.mozillazine.org/Profile_folder_-_Firefox
http://kb.mozillazine.org/Profile_backup
Please let us know how you fare.
edited to specify path difference on Windows

DRM and HFM integration when Org by period is ON

Similar Messages

Maybe you are looking for