Drop down vales not getting populated all the records
Hi,
I have the scenario. Drop down has the values. But it is getting populated for only one record. Second record drop down is there, but values are not there.It is blank from second record.
Thanks
GJ
Hi ,
Sorry for the confusion.
I am working on xml schema offline scenario. I have 10 line items. It has one drop down list. I have populated the value in drop down. But in the first item drop down list, the first value is appearing as deafult one. From the second line item onwards, it is not appearing as default value. When you dropped down on the list, I can see all the values. I want all the drop down list, the first value should be appear as default value.
Thanks
GJ
Similar Messages
-
Drop down values doesnt get populated in the standard PCRs
Dear SDN Community,
I am using Internal Transfer, Promotion and Transfer PCRs. In all the standard PCRs the dropdowns values are not getting populated. Can you please advice me here.
Thanks!
Surya.The portal patch upgrade has resolved this issue.
-
Drop Down List not getting populated
Dear All,
I have developed a form in SFP which containes a drop down list.The drop down list is to be populated by an internal table field.
Whenever I am executing the form i can see only the first item in the drop down listand nothing else.
While debugging i could see the almost 15 entries in the internal table.
I have mapped a field of this internal table to the drop down list.I am unable to figure out the problem....do let me know which type of drop down list should i use for this scenario....I even tried with java script...but nothing works for me...do let me know??
Waiting for t
Regards,
Geethi,
i guess you have bound the field but not the list elements of the field.
the content of the field (as result of the selection from the drop down list box) can be bound to a variable.
But if you want to display your internal table as entries in your drop down list box you have to do some dynamic data binding of the list elements.
to be able to do this, you first have to activate dynamic data binding in general. Use the way i proposed (--> extras from the toolbar!, options, data binding, dynamic). then the word "list elements" in the object palette of your dropdown list box will be green and you will be able to do some dynami data binding!
i recommend you this one:
--> http://www.adobe.com/devnet/livecycle/articles/strategies_creating_forms_lc_designer8/strategies_for_creating_form_designs_using_designer8.pdf
br
norbert -
Values not getting populated in the o/p
Hi,
I have a requirement,where in which I have to add MRP Controller(marc-dispo) and production scheduler(marc-fevor) fields in the selection screen and the same should be added in the o/p.These fields are not getting populated in the o/p,even if I give some values for these fields in the selection-screen.What would be the reason for this?
Regards,
HemaDear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'. "subtotal
>WRITE: 15 ls_stock-nrmit.
>WRITE 32 lv_stock-dispo.
>WRITE 43 lv_stock-fevor.
>ELSE. "total
>WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful. -
UWL : New tasks are not getting populated in the UWL
Hi Experts,
I<b> configured my uwl to my backend system , the completed tasks are getting populated in the UWL but the New tasks and in progress tasks are not getting populated in the UWL.(some thing strange).</b>
When i am trying to configure the universal worklist system ,its givin me a caution message as <b>System SHDCLNT012 does not support optimized delta pull</b> . where SHDCLNT012 is the system alias name.
Is this the problem for not populating the new tasks in the UWL?
Please provide me the solution..
Thanks & Regards,
SateeshHi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai -
Values not getting populated in the SMOPCCAPRO
Hi,
We had added a new field to CPGProduct in component CPGOE_ABLOCKS. But the extension field was not included to the BOL structure automatically.
So ,we had used the SAP note 1472567 to add the include structure INCL_EEW_MKTPL_PRD to structure CRMS_MKTPL_CPG_PROD which inturn would rectify our BOL structure CRMS_MKTPL_IB_CPG_PROD.
The field which we had added using AET was added in tables CRMD_MKTPL_PROD and SMOPCCAPRO. But we are facing an issue that the values are not getting populated in the SMOPCCAPRO table on save.The values are gettign populated in the CRM table.
Do we need to implement any other SAP note on the midleware side too to rectify this issue as i infer some interface structure would be missing this field which results in the truncation of value from being passed to the CDB table . Any pointers in this regard would be helpful.
Thanks
Swapna.Hi Swapna,
as the CDB table has been extended with the new field I assume that you have enabled the mobile flag for the enhancement.
Then it will also extend the mobile BDOC and the data should be transfered automatically.
If this does not happen there's an error somewhere. Either the middleware is not set up properly or the mapping routine does not transfer the fields properly.
I recommend to raise an OSS message for this.
Best regards
Matthias -
HT201269 I followed the steps But I did not get back all the aps?
I followed the steps But I did not get back all the aps?
Apps have never been included in the backup of the device.
Are the apps in the iTunes library on your computer? iTunes can only sync apps to a device that are in the iTunes library. -
Custom field not getting populated in the "Show Results where" drop down
Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.
-
Users details not getting populated in the portal tables..
Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html -
Search Help for Vendor Feild not getting populated in the Screen Element
Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
RajDear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'. "subtotal
>WRITE: 15 ls_stock-nrmit.
>WRITE 32 lv_stock-dispo.
>WRITE 43 lv_stock-fevor.
>ELSE. "total
>WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful. -
Cube values not getting populated in the report
Hi,
I have done the selective deletion of Purchase orders and done the repair load, the set of records are there in the cube but unable to see in the report.. the records in the cube satisfies the selection criteria also.
expecting the early response,
Points will be rewarded for the any information and solution also if any body face the same problem pls share the information.
regards,
vishali.Hi,
i have already activated the cube and that repair full request is available for reporting that icon has come in the cube and if it is reg. aggregates there are not aggregates present so .... what might be the problem pls let me know....
regards,
vishali. -
Functional Area field not getting populated in the AUFK table
Hi Friends,
The table AUFK is the table for Internal Order master data.
The issue which we are facing is:
In a particular Order type, the field 'Functional Area' is suppressed in the field status group for the order master data.
But the cost centers which are maintained in the order master has the functional area field populated with value.
In the table AUFK, the functional area field is populated for some internal orders and not populated for others. In all cases it should pick the functional area from the cost center which is maintained in the internal order.
Please guide us about what can be the possible reason(s) for populating the field in some cases while not populating in other cases.
Thanks a lot in advance for your help.
Regards,
ShilpiHi,
maintain the functional area in order master data to ensure 100% functional area is available in AUFK.
I can't tell you the reason why its sometimes appearing and sometimes not bur FUNC_AREA is not picked from responsible/requesting cost center (from master data).
If in customizing of internal order order types a "model-order" is assigned with maintained functional area, this func_area is taken if you create a new order for this ordertype.
Best regards, Christian -
VOFM - Vales not getting changed in the Screen
Hi,
I am working on the VOFM routines and want to change the condition value for gross price using the same.
I have created the routine number 600 in the application V1.
I have put a breakpoint in the routine which is getting triggered. But when I try to change the value of the variable XKWERT, the
same does not reflect in the screen and it still shows the original condition value.
I read many posts on SDN and tried those suggestions, but in vain. What could be the possible reasons for the same.
Regards,
SagarHi Madhumahesh,
Thanks for the reply. Please find below the code:
DATA : lv_kwert TYPE kwert.
FIELD-SYMBOLS : <lfs_xkomv> TYPE KOMV_INDEX,
<lfs_tkomv> TYPE KOMV.
*calculate the value of Excise Duty
CALL FUNCTION '/BGT/ED_PRICING_PURCHASE'
EXPORTING
i_komk = komk
i_komp = komp
IMPORTING
e_wert = lv_kwert.
IF lv_kwert IS NOT INITIAL.
xkwert = lv_kwert.
*modify XKOMV
LOOP AT xkomv ASSIGNING <lfs_xkomv> WHERE kschl = 'ZI11'.
<lfs_xkomv>-kwert = lv_kwert.
ENDLOOP.
*modify TKOMV
LOOP AT tkomv ASSIGNING <lfs_tkomv> WHERE kschl = 'ZI11'.
<lfs_tkomv>-kwert = lv_kwert.
ENDLOOP.
UNASSIGN : <lfs_xkomv>, <lfs_tkomv>.
ENDIF.
But after coming out of "Condition Value formula", these values are overwritten by the standard SAP code (as described above in earlier posts- by RETTKOMV in Include LV61AA55).
Kindly let me know what I'm missing in my code.
Awaiting for your valuable response.
Best regards,
Anurag Khanna -
When I go to a website from Safari I am routed to the App Store or to another website. I hit my home button and then it takes me back to the website I selected. It is almost like a virus. Help!
Simple really. The first 3 articles have steps in them, but not in this order.
#First, with Firefox closed, remove the toolbars from Windows ''Start > Settings > Control Panel > Add or Remove Programs''. After the window populates, look for the Toolbars; if there, click on them and click on the button to the right of it that says "Remove". Then restart your system ''Start > Shut down > Restart''
#*Article --> http://kb.mozillazine.org/Uninstalling_toolbars#Uninstalling_via_Windows_Control_Panel
#Second, start Firefox and check in Firefox Add-ons: '''''Add-ons > Extensions'''''. Look for Yahoo Toolbar or Babylon and try to remove by clicking "Remove" or "Disable".
#*Article --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons <u>and</u> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
#Restart Firefox by exiting (''Firefox button > Exit'' or ''File > Exit''), wait a few seconds (10-30), then click the Firefox desktop icon to start Firefox and test to see if the problem is resolved.
The last 3 articles are for other steps to take if the above does not work to solve your problem.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
In FIM datasource creation,model name dropdown menu not getting populated
Hi
When we try to create a new datasource in FIM it asks for a default model name. The default model name drop down menu is not getting populated by the model name. Please suggest what could be the possible solution for the same.
RegardsHello,
There are 3 other things to check if the PCM schema is on a Oracle database :
From FIM server :
1.a. Locate the "ojdbc6.jar" file located in the \jdbc\lib subfolder of your Oracle client installation folder and copy it.
1.b. Paste the copied file in C:\Program Files\Business Objects\Tomcat6\webapps\fim\WEB-INF\lib folder.
Note: This procedure is mandatory for an Oracle repository. Adding the path to the classpath variable is not
sufficient.
2. From the Tomcat Management Console properties, you need to add the path to the location where the tnsnames.ora file is hosted. You add this information on the Java page of the Apache Tomcat Properties dialog box under "Java options", for example, -Doracle.net.tns_admin=C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN
3. From the parameter "Net service name" filed for PCM datastore in FIM, make sure that the name matches exactly (case-sensitive) with the name of the service set into the Tnsnames.ORA file
Hope these additionnal findings would help you.
Thi Anh Antunes
Maybe you are looking for
-
I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to i
-
I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download. I was able to get part way through cs4, it showe
-
Synchronise my mail on my new iMac and old iPad
How do i do this so that once an emial is deleted from one of the inboxes it goes from the other? Thanks Skippins
-
External file attachment to a cell
Hi all, Is there any way to attach a file to a cell so it's displayed as an icon that you can click and open the file? The file itself must be stored inside the main spreadsheet file. Thank you in advance! Regards Nik
-
Wallstreet 233mhz to 300mhz... boots up, but no video
I picked up a 300mhz card for my Wallstreet. I even saw it running, in person, on another Wallstreet just fine (it was reported at 350mhz under OS 8, but I know that there were some issues with Wallstreets and OS 8 and 9 with regards to processor spe